Milwaukee MW14 Manuel utilisateur

WARRANTY:

This instrument is warranted from all defects in materials and manufacturing for

a period of two years from the date of purchase.

If during this period, the repair or replacement of parts is required, where the

damage is not due to negligence or erroneous operation by the user, please return

the parts to either dealer or our ofce and the repair will be effected free of charge.

Note: We reserve the right to modify the design, construction and appearance

of our products without advance notice.

SPECIFICATIONS:

MW 14

RANGE 0.00 to 5.00 ppm

RESOLUTION 0.01 ppm

ACCURACY ±0.04 ppm ±2% of reading @ 25 °C

TYPICAL EMC DEV. ± 0.01 ppm

LIGHT SOURCE Light Emitting Diode @ 525 nm

LIGHT DETECTOR Silicon Photocell

METHOD Adaptation of the EPA Phenantroline method

315B, for natural and treated waters. The re-

action between iron and reagent causes an

orange tint in the sample.

ENVIRONMENT 0 to 50°C (32 to 122 °F)

max. 95% RH non-condensing

BATTERY TYPE 1 x 1.5V AAA

AUTO-SHUT OFF After 3 minutes of non-use and 2

minutes after reading.

DIMENSIONS 81.5 x 61 x 37,5 mm (3.2 x 2.4 x 1.5 “)

WEIGHT 64 g (2,25 oz.)

OPTIONAL ACCESSORIES:

Reagent Sets

2720416 Iron powder reagent, 25 pcs.

Other Accessories

3000100 Glass cuvettes with caps (2 pcs)

3000200 Tissue fow wiping cuvettes (2 pcs)

3000300 1.5V AAA batteries (4 pcs)

USER MANUAL

IRON: HIGH RANGE

MODEL: MW14

PRELIMINARY EXAMINATION:

Please examine this product carefully. Make sure that

the instrument is not damaged. If any damage oc-

cured during shipment, please notify your Dealer.

Each MW 12 meter is supplied complete with:

• Two Sample Cuvettes and Caps

• Six powder reagents for Iron High Range

• 1 x 1,5V AAA Battery

• Instruction Manual

FUNCTIONAL DESCRIPTION:

1. Dust cover

2. Cuvette with cap

3. Cuvette holder

4. Liquid Crystal Display

5. Button

BATTERY REPLACEMENT:

To save the battery, the instrument shuts down after 3 minutes of non-

use and 2 minutes after reading. One fresh battery lasts for a mini-

mum of 5000 measurements, depending on the light level. When the

battery capacity is under 10 % “bAt” appears on the LCD at start-up.

If the battery is empty and accurate measurements can’t be taken any

more, the instrument shows “bAd” then “bAt” each for 1 second and

turns off. To restart the instrument, the battery must be replaced with

a fresh one.

To replace the instrument’s battery, follow the steps:

Turn the instrument off by holding the button until the meter shuts off.

OPERATION:

Turn the meter on by pressing the

button. After all the segments are

displayed, “C.1”, “Add” appears with

“Press” blinking, the meter is ready.

Fill the cuvette with 10 mL of unre-

acted sample and replace the cap.

Place the cuvette into the meter and

close the meter’s cap.

Press the button. When the display

shows “Add”, ”C.2” with “Press”

blinking the meter is zeroed.

Remove the cuvette, open it and add

the content of one packet of 2720416

reagent. Replace the cap and shake

gently for 2 minutes until the powder

is completely dissolved. Replace the

cuvette into the meter.

Wait for 3 minutes and then press the

button or press and hold the button

until the timer is displayed on the LCD.

The instrument directly displays the

concentration of iron in ppm. The me-

ter automatically turns off after 2 min-

utes.

•

Turn the instrument upside down

and remove the battery cover with

a screwdriver.

Remove the battery from its lo-

cation and replace it with a fresh

one.

Insert the battery cover and re-

place the screw with a screw-

driver.

•

Autres manuels Milwaukee Instrument de mesure

Milwaukee

Milwaukee MI408 Manuel utilisateur

Milwaukee

Milwaukee MW 14 Manuel utilisateur

Milwaukee

Milwaukee 2205-20 Manuel utilisateur

Milwaukee

Milwaukee MC110 Manuel utilisateur

Milwaukee

Milwaukee 48-22-5112 Manuel utilisateur

Milwaukee

Milwaukee 2280-20 Manuel utilisateur

Milwaukee

Milwaukee REDSTICK MLDIG14 Manuel utilisateur

Milwaukee

Milwaukee MR32ATC Manuel utilisateur

Milwaukee

Milwaukee Smart PH Meter Manuel utilisateur

Milwaukee

Milwaukee MR100ATC Manuel utilisateur

Milwaukee

Milwaukee SM100 Manuel utilisateur

Milwaukee

Milwaukee 2270-20 Manuel utilisateur

Milwaukee

Milwaukee SM500 Manuel utilisateur

Milwaukee

Milwaukee MI605 Manuel utilisateur

Milwaukee

Milwaukee MI 405 Manuel utilisateur

Milwaukee

Milwaukee MW500 Manuel utilisateur

Milwaukee

Milwaukee 3712 Manuel utilisateur

Milwaukee

Milwaukee PST MW12 Manuel utilisateur

Milwaukee

Milwaukee MW14 Manuel utilisateur

Milwaukee

Milwaukee SM700 Manuel utilisateur

Milwaukee

Milwaukee MC510 Manuel utilisateur

Milwaukee

Milwaukee SM801 Manuel utilisateur

Milwaukee

Milwaukee MI 404 Manuel utilisateur

Milwaukee

Milwaukee MC310 Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur