milleteknik 4p M Manuel utilisateur
PoE Switch 4p M
PoE switch with battery backup
EN
350-205
Publication date 2022-11-09
Table of Contents
1. About PoE from Milleteknik ................................................................................................. 5
2. How PoE powers devices connected to the power supply ..................................................... 5
3. Component overview PoE M ............................................................................................... 6
4. Wall mounting .................................................................................................................... 6
5. Connection of batteries ....................................................................................................... 7
6. Commissioning - how to start the unit .................................................................................. 8
7. Status indications ............................................................................................................... 8
8. Maintenance ...................................................................................................................... 8
8.1. battery change ........................................................................................................ 8
9. FAQ - PoE ......................................................................................................................... 9
10. ECO product sheet ........................................................................................................... 9
10.1. PoE product images / technical data ....................................................................... 9
10.1.1. Name, article number and e-number ............................................................ 9
10.1.2. About PoE from Milleteknik .......................................................................... 9
10.1.3. Power over Ethernet from Milleteknik ........................................................... 9
10.1.4. Areas of use ............................................................................................. 10
10.1.5. Fixed installation ....................................................................................... 10
10.1.6. Battery types ............................................................................................ 10
10.2. Regulations and certifications ............................................................................... 10
10.2.1. Requirements that the product meets ......................................................... 10
10.3. Expected operating time in the event of a power failure ( with new batteries) ........... 10
10.4. Circuit boards - Technical data ............................................................................. 11
10.4.1. Technical data: CEO 3 .............................................................................. 11
10.4.2. Technical data: PoE card ........................................................................... 12
10.5. Power supply ...................................................................................................... 12
10.5.1. Power supply - Technical Data LRS-150-48 ................................................ 12
10.6. Technical data enclosures .................................................................................... 12
10.6.1. Enclosures - Technical Data M .................................................................. 12
10.7. Link to the latest information ................................................................................. 13
10.8. Warranty, support, country of manufacture and country of origin ............................. 13
10.8.1. Warranty .................................................................................................. 13
10.8.2. Support .................................................................................................... 13
10.8.3. Country of manufacture ............................................................................. 13
10.8.4. Designed and produced by: Milleteknik AB ................................................. 13
10.9. Batteries - recommended, not included ................................................................. 14
10.9.1. Batteries are not included they are sold separately ..................................... 14
10.9.2. 7.2 Ah, 12 V AGM battery ......................................................................... 14
11. Product life cycle, environmental impact and recycling ...................................................... 14
12. Address and contact details ............................................................................................ 14
3
This page is intentionally left blank.
1. ABOUT POE FROM MILLETEKNIK
The series is designed to power PoE devices such as access systems, surveillance cameras and other
equipment that can be operated with Power over Ethernet. Through its function as a battery backup, the
PoE device can continue to be powered in the event of a power failure.
PoE switch 4p M, PoE switch 4p FLX S+ and PoE switch 4p FLX M+ are for security systems where
a, reliable power supply with battery backup and PoE function is needed. Our PoE have something we
call "controlled charging", which is a safety function that means that batteries are not charged with more
than 0.5 A. By controlling the charging of batteries, the lifespan of batteries is significantly extended.
2. HOW POE POWERS DEVICES CONNECTED TO THE
POWER SUPPLY
PoE can power, for example, surveillance cameras.
Connect external devices to be powered via PoE in ports 1-4.
Connect other devices that do not need to be operated with PoE in LAN1-2.
5
3. COMPONENT OVERVIEW POE M
Table 1. Component overview
Symbol Explanation
A Casing in powder-coated sheet metal.
B Space for batteries.
C PoE switch.
D Power supply unit.
E Motherboard.
F Cable entries.
4. WALL MOUNTING
Use four screws suitable for the wall to set up the cabinet.
The distance between the screw head and the wall should be 1.5–2 mm.
Preferably leave a 100 mm air gap around the unit.
6
5. CONNECTION OF BATTERIES
Battery wiring is mounted on the circuit board upon delivery. Pictures below only show how to connect
wiring.
1. Place the batteries in the cabinet with the battery terminals facing outwards, against the cabinet
door.
2. Connect the battery cable. Red cable on plus and black cable on minus.
• If possible, disconnect mains voltage when replacing the battery.
Figure 1. Wiring diagram for batteries in battery backup
Connect the terminals correctly so that you do not damage the equipment.
7
6. COMMISSIONING - HOW TO START THE UNIT
The unit works normally when the indicator LED on the outside of the cabinet door lights up with a solid
green light. See front panel for other status indications.
It may take up to 72 hours before the batteries are fully charged.
7. STATUS INDICATIONS
Solid green light: normal operation.
Solid yellow glow: Low battery voltage.
Solid red light: Low battery when the load output fuse is blown.
8. MAINTENANCE
The system with the exception of batteries is maintenance-free when installed in an indoor environment.
8.1. battery change
• If possible, disconnect mains (voltage) when replacing the battery.
• Disconnect battery cables. Note how battery cables are mounted before removing them.
• Remove battery fuse between batteries.
• Insert and fasten the new batteries.
• Connect the battery cables in the same way as before.
• Connect battery fuse between batteries.
• Switch on mains voltage. The indicator LED may not be green (up to 72 hours), until the batteries are
charged.
• Test the system by briefly disconnecting the mains voltage, (= the load is driven by the batteries), and
then switch on the mains voltage again.
8
9. FAQ - POE
10. ECO PRODUCT SHEET
10.1. PoE product images / technical data
Figure 2. PoE Switch 4p M
PoE switch with 4 PoE ports.
10.1.1. Name, article number and e-number
Name Item number E-number (swe)
PoE switch 4p M ME01C10048P02504PU 5171951
10.1.2. About PoE from Milleteknik
The series is designed to power PoE devices such as access systems, surveillance cameras and other
equipment that can be operated with Power over Ethernet. Through its function as a battery backup, the
PoE device can continue to be powered in the event of a power failure.
PoE switch 4p M, PoE switch 4p FLX S+ and PoE switch 4p FLX M+ are for security systems where
a, reliable power supply with battery backup and PoE function is needed. Our PoE have something we
call "controlled charging", which is a safety function that means that batteries are not charged with more
than 0.5 A. By controlling the charging of batteries, the lifespan of batteries is significantly extended.
10.1.3. Power over Ethernet from Milleteknik
• PoE for security applications with the need for power supply with backup power.
• Proven, reliable technology.
• For fixed installation.
• Swedish made.
9
10.1.4. Areas of use
• Power supply for camera surveillance.
• Security applications powered by PoE that need backup power in the event of a power outage.
10.1.5. Fixed installation
The product is intended for fixed installation. The battery backup must be installed by a qualified
installer.
10.1.6. Battery types
The ECO series can be used with AGM batteries. Do not mix types of batteries, brand or used and new
batteries.
10.2. Regulations and certifications
10.2.1. Requirements that the product meets
EMC: EMC Directive 2014 / 30EU
Electricity: Low voltage directive: 2014/35 / EU
EN 60950-1
PoE: IEEE 802.3af, IEEE 802.3at/30,8 W
CE: CE directive according to: 765/2008
Emission: EN61000-6-: 2001 EN55022: 1998: -A1: 2000, A2: 2003 Klass B, EN61000-3-2: 2001
EN55022 (CISPR22), GB9254 Class B, EN55014, EN61000-3-2Class A( 75% Load),EN61000-3-3
Environment REACH Regulation: Directive 1907/2006, WEEE Regulation: Directive 20021961E, RoHS Regulation: Directive
2015/863
10.3. Expected operating time in the event of a power failure ( with
new batteries)
PoE Battery Power
15.4 W Power
30.8 W Power 62
WPower
100 W Power
120 W Power
180W Power
240 W
PoE
switch 4p
M (48 V)
4 pcs
7.2 Ah 18 h 30
min. 8 h 30
min. 3 h 45
min. 2 h 1 h 45
min. - -
10
Table des matières
Autres manuels milleteknik Changer
