Milestone pro MPTP-T70HDV Manuel utilisateur
MPTP-T70HDV
HDBaseT Transceiver Set
All Rights Reserved
Version: MPTP-T70HDV_2016V1.0
User Manual
HDBaseT Transceiver Set
Preface
Read this user manual carefully before using this product. Pictures shown in this manual
is for reference only, different model and specifications are subject to real product.
This manual is only for operation instruction only, not for any maintenance usage. The
functions described in this version are updated till August 2016. Any changes of
functions and parameters since then will be informed separately. Please refer to the
dealers for the latest details.
All product function is valid till 2016-8-22.
Trademarks
Product model and logo are trademarks. Any other trademarks mentioned in this manual
are acknowledged as the properties of the trademark owner. No part of this publication
may be copied or reproduced without the prior written consent.
FCC Statement
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. It has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a commercial
installation.
Operation of this equipment in a residential area is likely to cause interference, in which
case the user at their own expense will be required to take whatever measures may be
necessary to correct the interference.
Any changes or modifications not expressly approved by the manufacture would void
the user’s authority to operate the equipment.
HDBaseT Transceiver Set
SAFETY PRECAUTIONS
To insure the best from the product, please read all instructions carefully before using
the device. Save this manual for further reference.
Unpack the equipment carefully and save the original box and packing material for
possible future shipment
Follow basic safety precautions to reduce the risk of fire, electrical shock and injury
to persons.
Do not dismantle the housing or modify the module. It may result in electrical shock
or burn.
Using supplies or parts not meeting the products’ specifications may cause damage,
deterioration or malfunction.
Refer all servicing to qualified service personnel.
To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this
product near water.
Do not put any heavy items on the extension cable in case of extrusion.
Do not remove the housing of the device as opening or removing housing may
expose you to dangerous voltage or other hazards.
Install the device in a place with fine ventilation to avoid damage caused by
overheat.
Keep the module away from liquids.
Spillage into the housing may result in fire, electrical shock, or equipment damage. If
an object or liquid falls or spills on to the housing, unplug the module immediately.
Do not twist or pull by force ends of the optical cable. It can cause malfunction.
Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to
the device before cleaning.
Unplug the power cord when left unused for a long period of time.
Information on disposal for scrapped devices: do not burn or mix with general
household waste, please treat them as normal electrical wastes.
HDBaseT Transceiver Set
Table of Contents
1. Introduction.................................................................................................................1
1.1 Brief Introduction ...............................................................................................1
1.2 Features ............................................................................................................1
1.3 Package Contents .............................................................................................1
2. Panel Description........................................................................................................2
2.1 Transmitter (MPTP-T70HDVT) ..........................................................................2
2.2 Receiver (MPTP-T70HDVR)..............................................................................4
3. System Connection.....................................................................................................6
3.1 Usage Precautions............................................................................................6
3.2 System Diagram................................................................................................6
3.3 Connection Procedure.......................................................................................6
3.4 Twisted Pair Cable Connection..........................................................................7
4. Operations..................................................................................................................9
4.1 Operations of front panel buttons ......................................................................9
4.2 RS232 Control...................................................................................................9
4.2.1 Installation/uninstallation of RS232 Control Software..............................9
4.2.2 Basic Settings..........................................................................................9
4.2.3 RS232 Communication Commands ......................................................10
4.3 RS232 Passthrough Feature...........................................................................16
5. Specification..............................................................................................................18
6. Panel Drawing ..........................................................................................................20
7. Troubleshooting & Maintenance ...............................................................................21
8. After-sales Service....................................................................................................23
HDBaseT Transceiver Set
1
1. Introduction
1.1 Brief Introduction
MPTP-T70HDV is an HDBaseT Transceiver Set which contains a Transmitter and a
Receiver.
It uses HDBaseT technology to deliver HDMI/DVI/VGA signal, and the max transmission
is up to 70m. Moreover, bi-directional RS232 control, RS232 pass-through, IR control
and PoC are supported by this product.
MPTP-T70HDV has a good application in various occasions, such as computer realm,
monitoring, big screen displaying, meeting room, education and bank & securities
institution etc.
1.2 Features
HDMI/DVI/VGA output resolution up to 1920x1200@60HZ.
Support bi- directional PoC.
Maximum transmission distance is up to 70m for 1080p.
In-built scaler function, support scaling HDMI/ DVI/VGAsignals to match the native
resolution of the displays.
Provide external audio input for DVI video signal.
HDMI/DVI/VGA input signal can be switched automatically.
Supports firmware upgrading via USB.
Control methods: front panel buttons of transmitter, bi-directional RS232 control.
LED indicators show work status.
1.3 Package Contents
1 x Transmitter (MPTP-T70HDVT)
1 x Receiver (MPTP-T70HDVR)
4 x Mounting Ears
8 x Screws
2 x RS232 Cable
8 x Rubber Feet
1 x Power Adapter (DC24V 1.25A)
1 x User manual
Notes:If you find any defective or missing parts, please contact your local dealer.
HDBaseT Transceiver Set
2
2. Panel Description
2.1 Transmitter (MPTP-T70HDVT)
Figure 2-1 MPTP-T70HDVT
No.
Name
Description
①
Indicators
Power: Illuminates red when power on.
LINK: Twisted Pair Link status indicator, illuminates
green when successfully connected.
VGA: Illuminates green when there is VGAsignal input
DVI: Illuminates green when there is DVI signal input.
HDMI: Illuminates green when there is HDMI signal
input.
AUTO: Illuminates green under auto-switching mode.
②
FW
Micro USB port, used for firmware update.
Plug a flash disk or other storage device with update file
(MERGE.bin), and send command 50698% to update
firmware.
③
PoC switcher
ON: Enable bi-directional PoC function.
In this model, Transmitter and Receiver cannot be connected
with power adaptors at the same time. Only one power
adaptor needed.
OFF: Disable bi-directional PoC.
In this model, you can connect power adaptors to Transmitter
and Receiver at the same time, or only connect one power
HDMILINK DVIVGA FW SOURCE/AUTO
ON / OFF
PoCAUTO
RS232
Tx Rx
DC 24V
HDMI INPUTS AUDIO IR IN IR OUT
OUTPUT
PoC
HDBaseT Transceiver Set
3
adaptor to Receiver, Transmitter can be powered.
④
SOURCE/
AUTO
Press to select one source, press again to select next
source, switching circularly between HDMI, DVI and
VGAinput. The indicator of the selected input source will
illuminate green.
Long-press this button for 5 seconds or more to enter in
auto-switching mode and the indicator AUTO will lights
green. Under this mode, the last signal source
connected to transmitter will be recognized as input
signal. Press and hold for 5 seconds or more again to
exit auto-switching mode.
⑤
OUTPUT
Connect to the INPUT port of Receiver with a CAT5e cable.
⑥
HDMI INPUT
Connect with HDMI source device.
⑦
DVI INPUT
Connect with DVI source device.
⑧
AUDIO INPUT
Connect with the audio input socket of DVI or VGA source
device, provide external audio signal for DVI or VGA video
signal.
⑨
VGA INPUT
Connect with VGA source device.
⑩
IR IN
Connect with IR receiver to collect infrared signal, work with
far-end IR OUT port.
⑪
IR OUT
Connect with IR Emitter to send infrared signal, work with
far-end IR IN port.
⑫
RS232
Serial port, 3-pin pluggable terminal block, supports
bi-directional RS232 control and pass-through function,
connect with the control PC or other devices needed to be
controlled.
⑬
DC 24V
Connect with DC24V 1.25A power adaptor (not necessary if
Receiver connects with power adaptor and the PoC button is
switched on).
HDBaseT Transceiver Set
4
2.2 Receiver (MPTP-T70HDVR)
Figure 2-2 MPTP-T70HDVR
No.
Name
Description
①
Power
Illuminates red when power on.
②
LINK
Twisted Pair link status indicator, illuminates green when
successfully connected.
③
FW
Micro USB port, used for firmware update.
Firmware updated need auxiliary equipment, please contact with
our after-sales department for more details.
④
INPUT
Connect to the OUTPUT port of Transmitter with a CAT5e cable.
⑤
HDMI
OUTPUT
Connect with HDMI displayer.
⑥
DVI
OUTPUT
Connect with DVI displayer.
⑦
AUDIO
OUTPUT
Connect with audio player, synchronously output audio signal with
DVI or VGA video signal output.
⑧
VGA
OUTPUT
Connect with VGA displayer.
⑨
IR IN
Connect with IR receiver to collect infrared signal, work with
far-end IR OUT port.
⑩
IR OUT
Connect with IR Emitter to send infrared signal, work with far-end
IR IN port.
LINK FW
RS232
Tx Rx
DC 24V
HDMI AUDIO IR IN IR OUT
PoC
OUTPUTS
INPUT
HDBaseT Transceiver Set
5
⑪
RS232
Serial port, 3-pin pluggable terminal block, supports bi-directional
RS232 control and passthrough function, connect with the control
PC or other devices needed to be controlled.
⑫
DC 24V
Connect with DC24V 1.25A power adaptor (not necessary if
Transmitter connects with power adaptor and the PoC button is
switched on).
Note: Pictures shown on this manual are for reference only, different model and
specifications are subject to real product.
HDBaseT Transceiver Set
6
3. System Connection
3.1 Usage Precautions
1) System should be installed in a clean environment and has a prop temperature and
humidity.
2) All of the power switches, plugs, sockets and power cords should be insulated and
safety.
3) All devices should be connected before power on.
3.2 System Diagram
Figure 3-1 System Connection Diagram
3.3 Connection Procedure
Step1. Connect a HDMI source device (such as Blue-ray DVD) to HDMI INPUT port of
Transmitter with HDMI cable.
Step2. Connect a DVI source device (e.g. PC) to the DVI INPUT port of Transmitter VI
cable.
Step3. Connect a VGA source device (e.g. Laptop) to the VGA INPUT port of
Transmitter cable.
Step4. Connect a VGA source device (e.g. Laptop) or other audio source device to the
AUDIO INPUT port of Transmitter with audio cable.
Step5. Connect OUTPUT port of Transmitter and INPUT port of Receiver with single
CAT5e/CAT6 cable.
RS232
Tx Rx
DC 24 V
HDMI INPUTS AUDIO IR IN IR O UT
OUTPUT
PoC
RS232
Tx Rx
DC 24 V
HDMI AUDIO IR IN IR O UT
PoC
OUTPUTSINPUT
CAT5e/ 6A Cable
HDMI Cable
PC(with discrete graphics)
PC
HDMI Cable
Laptop
Standby
HDTV
HDTV
HDTV
Blu-ray DVD1
Transmiter
Receiver
Table des matières
Autres manuels Milestone pro Émetteur-récepteur
