Miele KM427 Manuel utilisateur
Installation Instructions
Ceramic Cooktops
KM 421
KM 424
KM 427
To prevent accidents
and machine damage,
read these instructions
before installation or use.
UV
05 647 580
M.-Nr.
Important safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Safety distance above the cooktop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Appliance and cut-out dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
KM 421. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
KM 424. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
KM 427. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Installing the spring clips. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Granite countertops . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Installing the cooktop. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Electrical connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Contents
2
Note to the installer:
Please leave these instructions with
the consumer.
Installation
The minimum distances given in
these instructions must be observed
to ensure safe operation and to re-
duce the risk of fire.
To prevent damage, install cabinetry
and the venting hood before install-
ing the cooktop.
The countertop must be bonded
with heat resistant (212 °F/100 °C)
adhesive to prevent distortion or dis-
solving.
The cooktop should only be in-
stalled as shown in the illustrations,
while maintaining the required safety
distances shown. Do not install the
cooktop between two tall cabinets as
this is a fire hazard.
A minimum distance of 2" (50 mm)
from the cooktop to the rear wall and
a side wall must be maintained for
safety.
To eliminate the risk of burns or fire
by reaching over heated surfaces,
cabinet storage space above the
cooktop should be avoided. If cabinet
storage is necessary, the risk can be
reduced by installing a venting hood to
project horizontally a minimum of 5" be-
yond the bottom of the cabinets.
recommended
not recommended
aMinimum distance between the
cooktop and a wall or cabinet = 2"
(50 mm)
not allowed
Important safety instructions
3
2 ”
50mm
b
2 ”
This equipment has not been de-
signed for maritime use or for use
in mobile installations such as aircraft
or recreational vehicles. However, un-
der certain circumstances it may be
possible for an installation in these ap-
plications. Please contact the nearest
Miele Dealer or the Miele Technical Ser-
vice Department with specific require-
ments.
Because of the heat radiated from
this type of appliance we do not
recommend installing it over a drawer. It
should be installed in a cabinet base
unit with a dummy drawer front and an
additional protective barrier beneath
the unit.
If there is a drawer directly underneath
the cooktop, do not store aerosols,
combustible liquids or easily flammable
materials in it. If cutlery inserts are
placed in the drawer, they must be heat
resistant.
The cooktop must not be installed
over a dishwasher, washing ma-
chine, dryer, refrigerator or freezer. The
high radiant temperatures radiating
downwards from this type of cooktop
could damage these appliances.
Make sure that the power cord to
the cooktop does not come into
contact with any mechanical parts once
the cooktop has been installed.
Safety distance above the
coo top
As a general rule there must be a safety
distance of at least 30" (760 mm) b,
between the appliance and any flam-
mable objects above, e.g. cabinetry,
venting hood or utensil rail. If the manu-
facturer of these items states a different
figure, then this safety distance should
be followed.
If more than one appliance is in-
stalled beneath a venting hood, and
they have different minimum safety
distances to the hood, select the
higher safety distance of the two.
Important safety instructions
4
50mm c
2 ”
KM 421
aSpring clips
^Make the countertop cut-out following
the dimensions given in the illustra-
tion.
^Remember to maintain a minimum
distance of 2" (50 mm) between the
rear wall and a right or left hand side
wall. See also "Important safety in-
structions".
^Seal the cut surfaces with a suitable
heat resistant sealant to avoid swell-
ing caused by moisture.
If, during installation, the seal around
the frame does not sit flush with the
countertop on the corners, the cor-
ner radius max. R4 (3/8") can be
carefully filed down to fit.
*Use max. 3/8" drill bit.
Appliance and cut-out dimensions
5
(min.50)
"
2
(614mm)
(600mm)
(8mm)
516
"
ma .R4mm
* ma .R3/16
b
b
(532mm)
(518mm)
(75mm)
(75mm)
15
16
"
2
"
15
16
"
2
3
16
"
24
5
8
8
"
23
15
16
"
20
3
20
"
3
8
3
(85mm)
"
3
8
3
(85mm)
KM 424
aSpring clips
^Make the countertop cut-out following
the dimensions given in the illustra-
tion.
^Remember to maintain a minimum
distance of 2" (50 mm) between the
rear wall and a right or left hand side
wall. See also "Important safety in-
structions".
^Seal the cut surfaces with a suitable
heat resistant sealant to avoid swell-
ing caused by moisture.
If, during installation, the seal around
the frame does not sit flush with the
countertop on the corners, the cor-
ner radius max. R4 (3/8") can be
carefully filed down to fit.
*Use max. 3/8" drill bit.
Appliance and cut-out dimensions
6
"
3
8
3
(85mm)
(75mm) (75mm)
min.50
b
b
(532mm)
(763mm)
(749mm)
(8mm)
516
"
"
(518mm)
"
2
3
15
16
"
2
15
16
"
2
1
16
"
1
2
"
30
15
16
"
20
8
3
8
3
20
29
(85mm)
ma .R4mm
* ma .R3/16
"
KM 427
aSpring clips
^Make the countertop cut-out following
the dimensions given in the illustra-
tion.
^Remember to maintain a minimum
distance of 2" (50 mm) between the
rear wall and a right or left hand side
wall. See also "Important safety in-
structions".
^Seal the cut surfaces with a suitable
heat resistant sealant to avoid swell-
ing caused by moisture.
If, during installation, the seal around
the frame does not sit flush with the
countertop on the corners, the cor-
ner radius max. R4 (3/8") can be
carefully filed down to fit.
*Use max. 3/8" drill bit.
Appliance and cut-out dimensions
7
(903mm)
(889mm)
(532mm)
(518mm)
(8mm)
b
b
(min.50)
"
2
"
35
516
"
(75mm) (75mm)
15
16
"
2
15
16
"
2
15
16
"
2
9
16
"
35
15
16
"
20
8
"
3
20
ma .R4mm
* ma .R3/16
"
"
3
8
3
(85mm)
"
3
8
3
(85mm)
Installing the spring clips
^Fix the supplied spring clips, a, at
the marked positions as shown
above, by laying them on the upper
edge of the cut-out and then secur-
ing them with the 3.5 x 25 mm screws
supplied.
Granite countertops
For granite countertops, the spring
clips, b, must be placed in position
and secured with double-sided tape.
In addition, coat the edges of the
spring clips with silicone sealant.
The screws are not needed for granite
countertops.
Installation
8
(75mm)
b
3 ”
Installing the coo top
^Feed the power cord down through
the cut-out and connect the appli-
ance to the power supply.
^Position the cooktop on the spring
clips, a.
^Then with a hand on each side of the
cooktop press down on the edges
evenly until it clicks into position.
When doing so make sure that the
cooktop seal sits tightly on the
countertop to ensure a correct seal is
provided.
The cooktop can now only be re-
moved with a special tool.
The cooktop must not be perma-
nently sealed into the countertop
when installed.
If the cooktop is sealed into position,
the countertop or appliance could be
damaged if the cooktop needs to be re-
moved for maintenance or service. The
sealing strip under the edge of the top
part of the cooktop provides a sufficient
seal for the countertop.
Installation
9
Caution:
All electrical work should be per-
formed by a qualified electrician in
accordance with local and national
codes.
Disconnect the appliance from the
main power supply before servicing.
To reduce the risk of electric shock,
make sure that the appliance is
properly grounded after installation.
Power supply:
Please chec the data plate.
KM 421:
–240 VAC, 60 Hz, 30 A fuse rating,
–208 VAC, 60 Hz, 30 A fuse rating.
KM 424:
–240 VAC, 60 Hz, 40 A fuse rating,
–208 VAC, 60 Hz, 40 A fuse rating.
KM 427:
–240 VAC, 60 Hz, 50 A fuse rating,
–208 VAC, 60 Hz, 50 A fuse rating.
Ma e sure your electrical supply
matches the data plate.
WARNING:
THIS APPLIANCE MUST BE
GROUNDED
The appliance is provided with 3 leads;
L1 (black), L2 (red) and GND (green).
They must be connected to a dedi-
cated line through the use of an ap-
proved junction box.
For further information, see the wiring
diagram provided with the appliance.
Note to the installer:
Please leave these instructions with
the consumer.
Electrical connection
10
Autres manuels pour KM427
1
Ce manuel convient aux modèles suivants
2
Table des matières
Autres manuels Miele plaque de cuisson
Miele
Miele KM 6325-1 Manuel utilisateur
Miele
Miele SmartLine CS 7612 FL Manuel utilisateur
Miele
Miele KM 6350 Manuel utilisateur
Miele
Miele KM 5840 Manuel utilisateur
Miele
Miele KM 406 Instructions d'utilisation
Miele
Miele KM 360 G Manuel de la liste des pièces
Miele
Miele KM 6322 Manuel utilisateur
Miele
Miele KM 6388 Manuel utilisateur
Miele
Miele KM 404 Manuel utilisateur
Miele
Miele KM 7404 FX Manuel utilisateur
Miele
Miele KM 5753 Manuel de la liste des pièces
Miele
Miele KM 5656 Manuel utilisateur
Miele
Miele KM 7678-2 FL Manuel utilisateur
Miele
Miele MasterChef KM452 Manuel utilisateur
Miele
Miele KM 2312 Manuel utilisateur
Miele
Miele KM 360 G Manuel utilisateur
Miele
Miele CS 1018 G Manuel utilisateur
Miele
Miele KM 5603 Manuel utilisateur
Miele
Miele KM 451 Manuel utilisateur
Miele
Miele KM 451 Manuel utilisateur
