Midea B8 Series Manuel utilisateur
INSTRUCTION MANUAL
VACUUM CLEANER
B8
MBC2080BS
PLEASE READ THE
MANUAL CAREFULLY
BEFORE USING AND
KEEP IT PROPERLY FOR
FUTURE USE
EN, PL, CZ, SK, HU, RU, UK, ET, LT, LV, RO, SL
N
L
M1
M2
E
F
G
H
I
J
A
BC
D
K
Q
O P
U
R
T
S
1
5 6
**
11
7
**
2**
3**
4
9 10
A
B
A
B
**
12
16
20
13 14 15
17 18 19
8
4
English..................................................................
Polish....................................................................
Czech................................................................
Slovakian..........................................................
Hungarian........................................................
Russian..............................................................
Ukrainian..........................................................
Estonian............................................................
Lithuanian........................................................
Latvian...............................................................
Romanian........................................................
Slovenian...........................................................
5-10
11-17
18-24
25-31
32-38
39-45
46-52
53-59
60-66
67-73
74-80
81-87
5
GETTING TO KNOW YOUR CLEANER
A.Main cleaner
B.Hose
C.Hose handle
D.Telescopic tube
E.Crevice nozzle
F.Upholstery brush
G.Round brush
H.3in1 tools holder
I.Pet brush
J.Parquet brush
K.Floor brush
L. Dust full indicator
M1. Power button
M2. Cord rewinder button
N. Speed control slide
O. Exhaust foam
P. Exhaust HEPA 13
Q. Front cover
R. Front cover locker
S. Bag holder
T. Textile bag
U. Inlet filer assembly
6
Product operation
Assembling your cleaner
Take out all components from the packaging.
1. Connect the hose to the cleaner main body, ensuring it locks into position. [1]
To release the hose: rotate the connector counterclockwise and pull it. [2]
2. Connect the hose handle to the end of the fixed tube upper end and store the
accessories on the tube. [3B]
3. Connect the tube lower end to carpet and floor nozzle. [3A]
USING YOUR CLEANER
1. Extract power cord and plug it into the power supply. Do not pull the cord
beyond the red marker. [5]
2. Adjust the telescopic tube to the desired height by moving the telescopic tube
adjuster and raise or lower the tube to the most comfortable cleaning position.
[4]
3. Select Carpet or Floor Nozzle for ideal cleaning mode for the floor type. Hard
Floor – Brushes are lowered to protect the floor.
Carpet – Brushes are raised for the deepest clean.
4. Switch the cleaner on by pressing the on/off Pedal on the cleaner main body.
[6]
5. Adjust the power level by pressing the variable power control button** or by
pushing the variable power control slider**. [7]
6. Adjust the suction regulator* to the desired level. [8]
7. Switch off at the end of use by pressing the on/off Pedal. Unplug and extract
power
cord again to wind the power cord back into the cleaner.
8. Parking and Storage - The tube can be parked for temporary storage while in
use, or
in the storage position when not in use. [9]
7
Accessories
To obtain the best performance and efficiency it is recommended that the
correct nozzles are used for the main cleaning operations. These nozzles are
indicated in the diagrams by the letters K.
A nozzle type K can be used to clean both carpet and hard floor.
The other nozzles are accessories for specialist cleaning tasks and are recom-
mended for occasional use only.
All accessories can be fitted to the end of the handle or the end of the telescopic
tube.
Accessory Set* – Combines several functions in one, with maximum flexibility
by the rotating body. Reach into awkward areas by rotating the body. The 3 in 1
tool can be stored neatly underneath the hose handle.
Crevice Nozzle* – For corners and hard to reach areas. [E]
Upholstery Brush* – For soft furniture and fabrics. [F]
Round Brush* – For bookshelves, frames, keyboards and other delicate areas.
To extend the brushes push the button on the body of the tool. [G]
Parquet Brush* – For parquet floors and other delicate floors. [J]
Pet Brush* - Use the nozzle on stairs or for deep cleaning on textile surfaces
and other hard to clean areas. Particularly suitable for pet hairs removal. [I]
IMPORTANT: Do not use mini turbo nozzles on rugs with long fringes, animal
hides and carpet pile deeper than 15mm. Do not keep the nozzle stationary
while brush is rotating.
8
CLEANER MAINTENANCE
Replacing the Dust Bag
If the bag check indicator is red please check and, if necessary, replace the bag.
1. Lift the bag door release latch to open the bag door, pull the bag holder and
pull the
pull the bag collar to remove the bag. [10,11]
2. Apply the peel and seal sticker, located on the bag collar, to the bag inlet. The
full dust
bag should be disposed of correctly and carefully. [12,13]
3. Fold a new bag as shown on the bag and fit by inserting the collar into the
bag holder.
4. Refit the bag holder and close the bag door.
WARNING: The bag door will NOT close if the dust bag and/or the bag holder
are not assembled to the cleaner. Always ensure the bag and bag holder are
present when closing the bag door.
REMEMBER: The bag check indicator may also be lit if an obstruction has
occurred. In this case refer to ‘remove A Blockage from the System.
Cleaning the Filters*
To maintain optimum performance of your cleaner, please wash the filters after
each 5 bag changes.
Cleaning the pre-motor filter:
1. Lift the bag door release latch to open the bag door and remove the bag
holder. [11]
2. Remove the pre-motor filter frame from the cleaner. [14]
3. Remove the filter sponge from the holder. [15]
4. Wash it in hand warm water, and allow it to dry thoroughly before replacing to
the cleaner. [18, 19]
9
TROUBLESHOOTING
In case of malfunction, please refer to the following table
If the problem still can’t be solved, please contact local service center.
SolutionProblem Possible reason
The vacuum
cleaner does
not switch on
The machine
does not work
The machine
suddenly stops
- Too much dust in the bag
- Filter is blocked
- Brush duct is blocked
- Hasn't been fully dried after washing
-The power plugs are loose on the
socket or the power socket is not live
-The switch fails to be opened
- Empty the dust bag in time
- Clean the sponge filter
- Clean the blockage
- Dry the sponge filter in cool place
after washing
- Inspect whether power plugs are
tight or not or the socket is live or not
- Press the switch button
- The dust bag is full
- The sponge filter is blocked
- Suction inlet of brush or the other
accessory is blocked
- Empty the dust bag in time
- Clean the sponge filter
- Clean the blockage
Brand
Series
Model
Midea
B8
B8MBC2080BS
Power
Rating
Annual Energy
Power cord
Product size
800W
220-240V~50-60Hz
23.3kWh/yr (A)
Capacity 3L
9m
460*310*255mm
Filter HEPA13
GW 9.6kg
10
Ce manuel convient aux modèles suivants
1
Table des matières
Langues :
Autres manuels Midea Aspirateur
Midea
Midea H3 Series Manuel utilisateur
Midea
Midea VCW40 Manuel utilisateur
Midea
Midea V19P13A20Q0C Manuel utilisateur
Midea
Midea B1 Manuel utilisateur
Midea
Midea VCM43B16H Manuel utilisateur
Midea
Midea C3 VC1707 Guide de l'administrateur
Midea
Midea B5 Guide de l'administrateur
Midea
Midea VCB42A3670G Manuel utilisateur
Midea
Midea P7 MAX Schéma de câblage
Midea
Midea M6 Manuel utilisateur
Midea
Midea C100-B Guide de l'administrateur
Midea
Midea VTW21A15T-140 Manuel utilisateur
Midea
Midea VCP7 Manuel utilisateur
Midea
Midea M7 Manuel utilisateur
Midea
Midea P5 Series Manuel utilisateur
Midea
Midea CH835 Manuel utilisateur
Midea
Midea S8+ Manuel utilisateur
Midea
Midea VCS35B15KC Manuel utilisateur
Midea
Midea MVC-16P-BG Manuel utilisateur
Midea
Midea C7 Manuel utilisateur
