Microsens MS657033X Manuel utilisateur

User Manual –Entry Line

Industrial Gigabit Ethernet

High Power 60/95 W PoE Injector

Gigabit Ethernet Switch with PoE+ for Industrial Use Page 2/11

Table of Contents

General ................................................................................................................................ 3

Benefits................................................................................................................................ 3

Front View........................................................................................................................... 3

LED Display......................................................................................................................... 4

Dimensional Drawings....................................................................................................... 4

Mounting ............................................................................................................................. 5

Power Supply / Alarm Contact ........................................................................................ 7

Twisted Pair Connections.................................................................................................. 7

Application .......................................................................................................................... 8

Technical Specifications .................................................................................................... 9

Standard Compliance .......................................................................................................10

Safety Notes ......................................................................................................................10

Order Information.............................................................................................................11

Accessories ........................................................................................................................11

Gigabit Ethernet Switch with PoE+ for Industrial Use Page 3/11

General

This 60/95 Watts, high power single port industrial PoE Injector is equipped with

our high efficiency technology to provide up to 95 watts power to your security

equipment. The technology will not only power up your PD device, also reduce

the excessive heat problem to a minimum. It accepts the input voltage from 48

to 56 VDC to meet IEEE802.3af/at required voltage.

Applications for this PoE Injector are high power demanding end devices such as

PTZ cameras with integrated heating and high power lights. It is being rigorously

tested for your security, transportation and telco applications.

Benefits

System Interface/Performance

1x10/100/1000Base-T PoE+ (PSE) port

Supports PSE based on IEEE 802.3af and IEEE 802.3at standards

up to 95 W

1x10/100/1000Base-T data port

Power Supply

48..56 VDC Redundant Dual Power Input

Overload current protection

Reverse polarity protection

Chassis/Installation

IP-30 Protection

DIN-rail and Wall Mount Design

Front View

Gigabit Ethernet Switch with PoE+ for Industrial Use Page 4/11

LED Display

There are diagnostic LED indicators located on the front panel of the industrial

switch. They provide real-time information of system and operational status. The

following table provides description of the LED status and their meanings for the

switch.

LED

Color

Status

Meaning

Green

Power 1 is active

Off

Power 1 is inactive

Green

Power 2 is active

Off

Power 2 is inactive

Mode A

Green

End span PD detected

Off

No PoE supplied

Dimensional Drawings

Dimensional Drawing

Gigabit Ethernet Switch with PoE+ for Industrial Use Page 5/11

Mounting

The industrial switch supports two mounting methods: Wall & DIN-rail.

DIN-Rail Mounting

You can also mount industrial switch on a standard DIN-rail by below steps.

The DIN-rail kit is screwed on the industrial switch at delivery. If the DIN-rail kit

is not screwed on the industrial switch, please screw it on the switch first.

1. First, hang the industrial switch to the DIN-rail with angle of inclination.

Installation to DIN-rail (Step 1)

2. Then, lightly push the DIN-rail into the track.

Installation to DIN-rail (Step 2)

3. Check if the DIN-rail is tightened on the track or not.

4. To remove the industrial switch from the track, reverse steps above.

Gigabit Ethernet Switch with PoE+ for Industrial Use Page 6/11

Wall mounting

The industrial switch can be wall-mounted by using the included mounting kit.

1. First, use the screws included in the package to combine the industrial

switch and metal mounting kit and remove the DIN-rail adapter.

2. Then fix the switch with some screws to the wall.

Wall mounting brackets

Gigabit Ethernet Switch with PoE+ for Industrial Use Page 7/11

Power Supply / Alarm Contact

The power supply is done by an external power supply with an output voltage of

48..56 VDC. This power supply is not included at delivery, but can be ordered

separately (e.g. MS700455). The connection is done by the pluggable screw

terminals on the top of the device. The connection of a redundant power supply

can be done by the second screw terminal. Connect positive wire to P+, negative

wire to P-, also connect grounding/ earth wire to the grounding screw.

Pin out Power Connector and Alarm Contact

WARNING: Any exceeded input voltage will not make this unit function

and may damage this unit!

Warning: Always ground the power source to maintain a clean power

input.

Twisted Pair Connections

The integrated auto-crossing function of all twisted pair ports makes the use of

crossed patch cables unnecessary. The switch automatically detects the pinout of

the connected cable and adapts the port accordingly. For all connections standard

1:1 twisted pair cables can be used.

The Auto-negotiation mechanism detects automatically the speed and

transmission mode (full or half duplex) between connected ports. A manual

configuration is not required.

Note: Always make sure the total length of the TX cable DOES NOT exceed

100meter. Total length is defined as length A + length B.

Remote Switch

Gigabit Ethernet Switch with PoE+ for Industrial Use Page 8/11

During 100 Mbps transmission, the maximum total cable length is 100 meter.

During 1000 Mbps speed transmission, recommend maximum cable length less

than 90 meter is more desired.

Application

Gigabit Ethernet Switch with PoE+ for Industrial Use Page 9/11

Technical Specifications

Type Industrial Gigabit Ethernet 60/ 95 W PoE Injector,

1x 10/100/1000Base-T(X) data,

1x 10/1000/1000Base-T(X) data with PoE

Cable type Unshielded/shielded twisted pair cable, 100 Ohm,

min. category 5e

Data rate 10, 100 or 1000 Mbps

Power-over-Ethernet PoE+ up to 95 W per port according IEEE802.3af/at

LED displays Power 1/2 (green)

Mode A (PoE injected: green)

Mounting 35 mm top-hat rail, according DIN EN 50 022 optional

wall mounting set

Power supply 48..56 VDC, connections with screw terminals,

redundant ports

Power / relay wiring Wire range: 0.34 mm² to 2.5 mm²

Solid wire (AWG):12-24 / 14-22

Stranded wire (AWG): 12-24 / 14-22

Torque:5 lb-In / 0.5 Nm / 0.56 Nm

Wire Strip length: 7-8 mm

Power consumption Typ. 1 W @ 48 VDC without PoE

PoE pin assignment Mode A (End Span), V+ (pin 1, 2), V- (pin 3,6),

V+ (pin 4, 5) and V- (pin 7, 8)

Dimensions 32 x 81.5 x 103.5 mm (w x d x h)

Operating temp. -40° C to 75° C

Storage temp. -40° C to 85° C

Rel. humidity 5% to 95% non-condensing

EMC EN 55022 class A, EN 55024

Shock EN 60068-2-27

Free fall EN 60068-2-32

Vibration EN 60068-2-6

Safety EN 60950-1

CE 2014/30/EU EMC Directive

2011/65/EU RoHS Directive

Gigabit Ethernet Switch with PoE+ for Industrial Use Page 10/11

Standard Compliance

IEEE Standards

IEEE 802.3 10Base-T Ethernet

IEEE 802.3u 100Base-TX Fast Ethernet

IEEE 802.3ab 1000Base-T Gigabit Ethernet

IEEE 802.3z 1000Base-X Gigabit Ethernet

IEEE 802.3af for PoE (up to 15 Watts per port for PSE)

IEEE 802.3at for PoE+ (up to 30 Watts per port for PSE)

Safety Notes

DANGER: Conductive components of power and telecommunications networks

can carry dangerously high voltage.

To avoid electric shock:

Do not carry out installation or maintenance work during lightning storms.

All electric installations must be carried out in accordance with local

regulations.

Table des matières

Autres manuels Microsens Changer

Microsens

Microsens MS450154PM-48 Manuel utilisateur

Microsens

Microsens MS653410MX Manuel utilisateur

Microsens

Microsens MS400863M Manuel utilisateur

Microsens

Microsens MS453526M Manuel utilisateur

Microsens

Microsens MS400863M Manuel utilisateur

Microsens

Microsens MS453510 Manuel utilisateur

Microsens

Microsens MS415259M Manuel utilisateur

Microsens

Microsens MS657208PX Manuel utilisateur

Microsens

Microsens MS453514M Manuel utilisateur

Microsens

Microsens MS453490M Manuel utilisateur

Microsens

Microsens MS400870M Series Manuel utilisateur

Microsens

Microsens MS650850M Guide de l'utilisateur

Microsens

Microsens 10Base-TX Fiche technique

Microsens

Microsens MS453510M Manuel utilisateur

Microsens

Microsens MS400991M Manuel utilisateur

Microsens

Microsens Profi Line Modular SERIES Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur