MICROMATIC MDD23W Series Guide de démarrage rapide
Pro-Line Wine
Dual-Temperature Wine Keg Storage & Dispensing
Installation, Use & Maintenance Guide
PLEASE READ BEFORE USE
Before getting started please read this user manual and at all times
follow the important safety instructions.
MDD23W Series MDD58W Series
Wine On Tap
Keg wine is the smart choice. Fine varietal wines are now in kegs. Serve wine at
the optimal temperature the vintner intended it to be enjoyed. Pro-Line Wine
units feature dedicated dual-temperature zones: one for whites (45°F) and one
for reds (55°F). Keg wine is a great value with minimal waste and stays fresh
until poured.
Increase Sales
• Dispense Wine…Any Place, Any Time
• Capture incremental sales
• Open up new opportunities for pro tability
Dispense Quality Wine
• Pour consistency from the rst to the last glass
• Once tapped, keg wine stays fresh for up to 6 weeks
• Eliminate open bottle degradation and oxidation
Operating Efficiency
• No corks to pull, no bottles to stock or recycle
• Realize maximum product yield
• Low maintenance cost
• Small footprint = 26 bottles per keg
www.micromatic.com•1(866)327-4159 Installation, Use & Maintenance
Pro-Line Wine
1
Operating Efficiency
• No corks to pull, no bottles to stock or recycle
• Realize maximum product yield
• Small footprint = 26 bottles per keg
www.micromatic.com•1(866)327-4159 Installation, Use & Maintenance
Pro-Line Wine
2
Table Of Contents
Receiving & Inspecting.........................................................................Page 3
Location ......................................................................................................Page 4
Installation .................................................................................................Page 4
• Install Wine Font
• Install Keg Tapping Kit
Speci cations & Dimensions..............................................................Page 5
Keg Temperature Storage & Serving...............................................Page 7
Thermostat Adjustment.......................................................................Page 9
Data Plate................................................................................................Page 13
Electrical Connections .......................................................................Page 13
Troubleshooting...................................................................................Page 14
Maintenance..........................................................................................Page 15
• Cleaning the Cabinet
• Defrosting
• Cleaning Condensor Coil
• Door Gasket Maintenance
Wiring Diagrams...................................................................................Page 17
Parts Listing............................................................................................Page 19
Warranty ..................................................................................................Page 22
www.micromatic.com•1(866)327-4159 Installation, Use & Maintenance
3
Receiving & Inspecting
Upon receiving your new Micro Matic Pro-LineWine dispenser, check the package
and the unit for any damages that may have occurred during transportation.
Visually inspect the exterior of the package. If damaged, open and inspect the
contents with the carrier. Any damage should be noted and reported on the
delivering carrier’s receipt.
In the event that the packaging is not damaged, yet upon opening, there is
concealed damage to the equipment notify the carrier immediately. Noti cation
should be made verbally as well as in written form. Request an inspection by the
shipping company of the damaged equipment. Retain all crating material until
inspection has been made. Finally, contact Micro Matic.
Uncrating
1. Cut and remove the outer packaging.
2. Lift the unit o the skid.
3. If the unit has been laid down during this operation leave upright for 24 hours
before plugging into power source.
Pro-Line Wine
MDD23W SeriesMDD58W Series
www.micromatic.com•1(866)327-4159 Installation, Use & Maintenance 4
Pro-Line Wine
Location
• Be sure the location chosen has a oor strong enough to support the total weight of the
unit and contents.
• Recommended to use a professional installation company.
• For the most effi cient operation, be sure to provide good air circulation around the unit.
• MDD23W cannot be used for built-in applications.
• Avoid hot corners and locations near stoves and ovens.
• It is recommended the unit be installed no closer than 2" from any wall.
• The place for the dispenser must be open and free of dust and debris.
Installation
Install Wine Font (Sold Separately)
• Place rubber washer over draft tower mounting holes in cabinet top.
• Place wine line down through holes.
• Secure font with four bolts provided.
• Attach keg connectors to wine lines (provided with wine font).
Install Keg Tapping Kit(s) (Sold Separately)
Use only Wine Certi ed components for wine dispensing. This includes grade 304 stainless steel
or better and Barriermaster Flavourlock tubing. Use of these components assures vintners quality.
Use John Guest swivel elbows to minimize line kinking. Use zip ties to secure to gas line (blue
hose) to John Guest tting.
www.micromatic.com•1(866)327-4159 Installation, Use & Maintenance
5
Pro-Line Wine
Specications & Dimensions
MDD58W Series
Capacity of 20 Liter Kegs 8 (4 per zone)
Cubic Feet Per Side TBD
Hole for Wine Font 2
Hole Diameter 3"
Color-coded Digital Thermostats 2 (Blue LED-Whites & Red LED-Reds)
Temperature Range–Whites 42–48°F (5.5–8.8C)
Temperature Range–Reds 55–65°F (12.7–18.3C)
Approval ETL Listed
Running Amps 6.5
Condenser HP 1/3
Voltage 115/60/1
Plug Type NEMA-5-15P
Cord Length 8'
Refrigerant R-134a
Charge oz (Grs) 10.5 (300)
Exterior 18 gauge stainless steel top, 22 gauge solid self-closing doors, black vinyl over 24 gauge steel
front, sides and back.
Interior 20 gauge stainless steel oor, rugged false oor, reinforced frame, 24 gauge galvanized walls.
Ventilation Front and side ventilated
Plumbing Automatic condensate evaporator, no drain connection required. Evaporator condensate has
been plumbed to a condensate pan located in the compressor housing.
Insulation Foamed-in-place using high density, CFC-free polyurethane; 1-1/2" top, walls and oor.
Accessories Castors or 6" Fixed legs
TOP FRONT
1511mm
59 1/2"
946mm
37 1/4"
1302mm
51 1/4"
717mm
28 1/4"
584mm
23"
51mm
2"
527mm
20 3/4"
813mm
32"
SIDE
590mm
23 1/4"
305mm
12"
604mm
23 3/4"
597mm
23 1/2"
www.micromatic.com•1(866)327-4159 Installation, Use & Maintenance 6
Specications & Dimensions
MDD23W Series
Pro-Line Wine
Capacity of 20 Liter Kegs 4 (2 per zone)
Cubic Feet Per Side TBD
Hole for Wine Font 1
Hole Diameter 3"
Color-coded Digital Thermostats 2 (Blue LED-Whites & Red LED-Reds)
Temperature Range–Whites 42–48°F (5.5–8.8C)
Temperature Range–Reds 55–65°F (12.7–18.3C)
Approval ETL Listed
Running Amps 2.7
Condenser HP 1/6
Voltage 115/60/1
Plug Type NEMA-5-15R
Cord Length 8'
Refrigerant R-134a
Charge oz (Grs) 10.5 (300)
Exterior 18 gauge stainless steel top, 22 gauge solid doors, black vinyl over 24 gauge steel front, sides
and back.
Interior 20 gauge stainless steel oor, rugged false oor, reinforced frame, 24 gauge galvanized walls.
Ventilation Rear ventilated
Plumbing Automatic condensate evaporator, no drain connection required. Evaporator condensate has
been plumbed to a condensate pan located in the compressor housing.
Insulation Foamed-in-place using high density, CFC-free polyurethane; 1-1/2" top, walls and oor.
Mobility Castors are standard and not removable.
Keg Temperature: Storage & Serving
Storage
It is important to understand that when the keg of wine is delivered it must be properly stored.
• White wine must be stored inside the cooler as soon as possible, as it may take as many
as 24 hours for the temperature to be reduced to the desirable range.
• It is recommended to store both reds and whites at room temperature (approximately
72°F.)
• Wine kegs stored in a walk-in cooler (approximately 38°F) may dramatically eect the
time it takes to reach the desired serving temperatures.
• Allow 24 hours for kegs to reach the desired serving temperature (45°F for whites and
55°F for reds).
• Just like a bottle of wine, the best temperature to store white or red wines is between
45-60°F: neither too cold, nor too warm. Remember, wines are both cold- and heat-
stabilized. Most white wines are cold-stabilized to approximately 36°F. If the wine gets
any colder for any length of time, the risk arises that the naturally occurring “tartrates”
may drop out of solution and appear as“sediment” in the bottom of a wine glass.
Serving
Pro-Line Wine units are designed to maintain your wine keg temperature within the vintners
recommended temperature serving range:
• White wines: 45°F (range: 40-45°F)
• Red wines: 55°F (range: 55-60°F)
IMPORTANT NOTICE:
The thermostats on the Pro-Line Wine units have been factory preset at approximately
45°F for white wine dispensing and approximately 55°F for red wine dispensing.
Any change to the factory settings will aect performance of unit and void the warranty.
Factory testing has produced results that show consistent wine (liquid) temperatures are being
maintained by the unit. The Pro-Line Wine unit operates like any refrigeration unit; the compressor
is engaged when the interior air temperature reaches the pre-determined maximum level, cooling
the unit until it reaches the pre-determined minimum level. The goal is consistent wine (liquid)
temperature inside the keg. Thermostat displays are reading the air temperature setting and may be
dramatically dierent than the keg (liquid) temperatures. To verify, measure the temperature of the
wine dispensed in the glass.
www.micromatic.com•1(866)327-4159 Installation, Use & Maintenance
7
Pro-Line Wine
MDD23W Air & Wine Temperatures
This chart shows that air temperature cycles, but keg (liquid) temperature remains consistent.
www.micromatic.com•1(866)327-4159 Installation, Use & Maintenance 8
Pro-Line Wine
Adjusting the Thermostat
The Pro-Line Wine dispenser is designed to maintain your wine keg temperature within the most
desirable range of 45° to 55°F (depending on the varietal). You can expect the Pro-Line unit to
maintain temperature with the proper temperature control setting and in a normal environment.
If a dierent setting is desired, follow these instructions to
adjust the thermostat.
www.micromatic.com•1(866)327-4159 Installation, Use & Maintenance
9
Pro-Line Wine
Symbol Mode Operation
On Compressor enabled
Flashing Anti short cycle delay enabled (AC parameter)
On Defrost in progress
Flashing Dripping in progress
On Measurement unit
Flashing Programming mode
On Measurement unit
Flashing Programming mode
To display target set point,
in programming mode
it selects a parameter or
con rms an operation
To start a manual defrost
(only XR02CX).
In programming mode it
browses the parameter
codes or increases the
displayed value.
In programming mode it
browses the parameter
codes or decreases the
displayed value.
Key Combination Operation
To lock or unlock the
keyboard
To enter into
programming mode
To return to room
temperature display
Ce manuel convient aux modèles suivants
1
Table des matières
