1. INTRODUCTION
1.1 General Description
The Microcare 600W 12V UPS is designed as an easy plug-in solution for loadshedding and backup
power for domestic and business applications. When the grid returns with a fluctuating voltage, the
UPS can delay to a set transfer time to avoid load damage.
1.2 Key Features
•Lithium Iron Phosphate Battery (LiFePO4)
•Stainless Steel Enclosure or Powder coated option available
•No Programming Required
•High Surge Capacity
•Low Idle Current
•12V Socket Output
•220V Output for Lights, TV & Laptops
•5V USB Output for Cell phone Charging
•Fan Cooling for Optimum Performance
•Protection against Short Circuit
•5 Year Carry-In Warranty (excluding the battery)
•Minimum Service Turnaround
2. SAFETY INSTRUCTIONS
2.1 Installation Location
•Place the UPS indoor in a dry protected location away from any sources of moisture.
•The mounting surface must support the weight of the UPS.
•Exposure to saltwater is particularly destructive.
•Do not place the UPS in a closed container.
•Unrestricted airflow is required for the UPS to operate at optimal efficiency.
•Ensure a 200mm unrestricted clearance at the top, left and right side of the UPS.
2.2 Precautions When Working with Batteries
•Ensure that both circuit breakers are switched off and all loads disconnected before
connecting or disconnecting the battery leads.
•Be cautious not to drop any tool or metal objects on the battery, this can cause a short circuit
or spark and could cause an explosion.
•Remove metal items like rings, bracelets and watches when working with batteries, this could
cause a short circuit and cause a severe burn.
2.3 Battery Reverse Polarity Connection
•Incorrect battery polarity connection can cause severe damage to the UPS.
