Mia Moda COMPAGNO 1700 Manuel utilisateur
Compagno
1700
Dea r Cust omer,
Thank you for purchasing your new Mia Moda stroller. We are pleased that you have chosen this
product and hope you will be completely satisfied with the service you receive from this item. We
advise you to read the instructions BEFORE assembly and USE of the product, then KEEP THEM IN A
SAFE PLACE FOR FUTURE USE. Failure to read instructions carefully can jeopardize the safety of your
child. Careful attention to the care instructions of the stroller will enable long and trouble free use of
your new purchase.
In the event your Mia Moda product requires repair, please contact us at 1-866-Mia-Moda (642-6632).
Our Consumer Services department will provide you the proper steps to ensure the fastest remedy to
your problem.
Sincerely,
Mia Moda
1966 Highway 160 West
Suite 101
Fort Mill, SC 29708
www.miamodainc.com
Page 2
Page 3
1. This product frame is manufactured according to ASTM-F833, nationally recognized standards and is also
JPMA certified. To ensure the safety of your product, the moving components and pivot points must be
lubricated regularly.
No te : Use only sili con-o il or s ili con-s pr ay for lubricating this stroller.
2. Re gula r care and mainte nance help contribute to the safety and l ongevity of your product;
environmental influences and outdoor storage could cause corrosion. Therefore, always store your
stroller indoors. Do not keep the stroller in a damp, cold, or hot place.
3. We recommend regular maintenance of the frame and fabrics. Should the frame and fabrics become
soiled, use a damp cloth and mild detergent to wipe away the dirt. Do not use abrasives or solvents.
4. Never force any folding or adjustable parts.
5. Ensure that all locking devices are correctly engaged before use.
6. Regularly check the unit to ensure that no parts are loose or broken.
Care & Maintenance
Page 4
Parts List
Check that you have all the parts for this model before assembling this stroller. If any parts are missing,
call Customer Service at 1-866-Mia-Moda (642-6632).
Front tray Canopy
Front wheel(2) Caps(2)
Rear axle
Wheel
Caps(2)
Rear wheel(2)
Footrest
Washers (2)
Car Seat Adaptor
Parent tray
Hub
Adult assembly is required for this product. This package contains small parts.
Keep all small parts away from children during assembly.
No Tools Required.
WARNING
Page 5
Stroller Assembly
1. Carefully remove stroller and all parts from the box and
plastic bag.
2. Discard all packaging materials properly.
3. Remove all plastic coverings from areas of the product
and discard.
4. DO NOT allow children to play with any packaging
materials and contents.
5. Unfolding the Stroller. To unfold the stroller, position
the stroller with the handle bar closest to you. Keep
children away from the stroller while unfolding.
Release the locking latch located on the right side by
lifting the lever from the chassis. See Figure 1.
Lift up slightly on the handle of the stroller. Next, pull up
and back on the handle while pushing the frame of the
stroller forward until both side frame bars snap into their
locking positions in the frame. See Figures 2 and 3.
2
3
1Hook
Page 6
Stroller Assembly
6. Attaching the Front Wheels. Insert the front wheels
into the tube of the frame until you hear a click. Repeat
for other wheel. Pull to confirm it is assembled securely.
See Figure 4.
7. Assembling the Rear Wheels. Ensure that the brake
is engaged (see Functions section). Push the rear axle
into the rear wheel receiving location at the back of the
stroller. See Figure 5.
Affix the wheel onto the axle. Next, place the washer
and wheel cap over both rear wheels and secure tightly.
Finally, affix the hubcap over the wheel and washer
and wheel hub and secure tightly.
Pull to confirm that the rear wheels are assembled
securely. See Figure 6.
8. Attaching Footrest. Snap footrest onto front legs of
stroller just below the seat. Push downward on the
footrest until it locks into place. See Figure 7.
5
6
4
Footrest support
Rivet
7
Page 7
Stroller Assembly
9. Attaching Child Tray. Insert the ends of the child tray
into receiving points on the stroller. Check that the tray
is securely latched in place. See Figure 8.
10. Attaching Parent Tray. Fit the parent tray in the
upright position at the top of the handle bar below the
grip. See Figure 9.
11. Attaching the Canopy. Position the canopy on the
stroller with the sun visor toward the front of the stroller.
Line up the male fittings with the female fittings near
the center of the stroller and push downward until the
fittings snap into place. Pull upward on the canopy sides
to be sure both are snapped securely into place. See
Figure 10.
8
9
10
Page 8
Functions
1. Front Swivel Locks. The front wheels can be either in
the swivel mode or locked mode. To put front wheels in
locked mode, first pull down the lever and rotate each
wheel so that the wheels are pointed straight forward.
To put front wheels in swivel mode, pull up the lever
and release the lock. See Figure 11.
2. Engaging the Brakes. Before placing the child into the
stroller or removing them from the stroller, be certain
that the rear wheel brakes are engaged. To engage rear
brakes, push down on the brake lever located on each
rear wheel. Check that the brakes are properly applied
by trying to push the stroller backward and forward.
3. Releasing the Brakes. Position foot underneath brake
levers and lift upwards. See Figure 12.
4. Removing Child Tray. Locate the buttons on the base
of the child tray joint. Press buttons and remove the
child tray from the stroller.
12
11
Page 9
Functions
5. Adjusting the Canopy. To open the canopy, pull
forward on the front edge of the canopy while holding the
back edge in place. Once the canopy is fully opened, push
down on BOTH side hinges to lock it in the open position.
The canopy with rotate forward or backward to help
block the sun. Pull forward or backward to rotate the
canopy as needed.
To remove the canopy, engage rear brake and pull
forward both sides of canopy female fittings until the
canopy disengages from the frame.
6. Handle Bar Adjustment. Locate the push buttons on
the sides of the handle bar. Press buttons simultaneously
and adjust the handle bar to the desired height. See
Figure 13.
7. Seat Recline. The front seat has a 2-position seat
recline. To recline the seat, locate the handle at the back
of the seat unit. Lift the bar while gripping the seat back
simultaneously. Raise or lower as needed. See Figure 14.
13
14
Page 10
Functions
8. Using the Stand-On Platform. Push the rear seat to
its most forward position. Position the canopy to its
most forward position. Position the child on the platform
on the back of the stroller facing forward with BOTH
hands on the rear handles. Be sure that BOTH of the
child’s feet are fully on the platform at all times. You
may need to adjust the position of the front seat back to
allow more room for the child to stand. See Figure 15. 15
WARNING
The rear stand-on platform and the rear bench seat are designed for a child that is at least
a 2 ½ years old but LESS than 40 inches tall and no more than 45 lbs. Use of the stroller
with child in the front seat weighing more than 40 lbs and a child in the rear weighing
more than 45 lbs, or children totaling more than 85 lbs, will cause excessive wear and tear
on the stroller and may cause a hazardous, unstable, and unsafe condition.
NEVER allow a standing child to use the canopy as a handle.
NEVER use this stroller to carry more than 2 children at the same time.
Table des matières
Autres manuels Mia Moda Poussette
