Mi 2H Manuel utilisateur
Mi Air Purifier 2H User Manual
Oczyszczacz powietrza Mi 2H Instrukcja obsługi
1
10
19
27
36
45
53
62
70
79
Manuale utente Mi Air Purifier 2H
Mi Luftreiniger 2H - Benutzerhandbuch
Mode d’emploi du Mi Air Purifier 2H
Mi 2H
Manual de usuario de Mi Air Purifier 2H
Руководство пользователя для Очистителя Воздуха Mi 2H
Mi 공기청정기 2H 사용 설명서
11
Warning
Do not use under the below circumstances, this may lead to electric shock,
fire and other damage：
· Unstable places where the unit is easy to topple and fall
· High-temperature, humid or wet places such as the bathroom
· This appliance can be used by children aged from 8 years and above and persons with
reduced physical, sensory or mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning use of the appliance in a safe
way and understand the hazards involved
· Children shall not play with the appliance. Cleaning and user maintenance shall not be
made by children without supervision
· Prior to cleaning or other maintenance, the appliance must be disconnected from the
supply mains
2
Product Overview
Power/Mode Button
Wi-Fi Indicator
Auto: Automatically
switches modes according
to air quality condition
Fan Grille
Light/
Filter Reset Button
Dust Sensor
Filter Compartment Panel
Power Cord
Connector
Night: Low-noise for a
quiet night
Manual: Adjust and
manage settings via app
Air Quality/Filter
Replacement Indicator
Light
Mode Indicator:
Front
Back
Green
Orange
Red
0-75 μg/m³
76-150 μg/m³
150 μg/m³ or higher
3
Instructions
Open the filter compartment
panel
Press the filter compartment panel
to make sure the filter is correctly
installed.
1Connect the power cord
Connect the power cord with
power connector at the bottom
of your purifier, then connect the
power cord to a power outlet.
3
Take out the power cord
Take out the power cord and
close filter compartment panel.
2
123
4
Power/Mode Button: Light Button: Air Quality Indicator:
Press the power/mode button to
turn on the purifier, and to switch
modes. Press and hold for two
seconds to turn off the purifier.
Press the light/filter reset button
on the back of the purifier to
adjust the light brightness.
Brightness status are: strong, soft
and off.
A green, orange or red light
indicates the current air quality.
5
Maintenance
Notes
Please make sure to turn off and unplug the
purifier before cleaning the filter compartment
or the dust sensor.
The average filter replacement period is 6 - 12
months. When the filter needs to be replaced,
the filter replacement indicator will blink red.
2
1
Cleaning Filter Compartment Cleaning Dust Sensor:
To ensure your purifier properly
works and purifies, use a vacuum
cleaner or soft cloth to remove
any dust from the ventilation
holes and the filter compartment.
1. The latch of the dust sensor's
cover is located at the top inside
the filter compartment panel. Lift
to open the cover.
2. Use an air blow gun or hair dryer
to clean the dust sensor and its
back cover.
6
When the filter is saturated by harmful gases,
it may give off odors. Please place the filter in a
sunny and ventilated place to eliminate odors.
Filter Replacement: Resetting the Wi-Fi:
1. Please refer to the Filter
Replacement label on the inside
of the filter compartment panel
for detailed instructions.
2. After replacing the filter, turn on
the purifier, and press and hold the
filter reset button for 6 seconds. A
beeping sound indicates that the
filter has been successfully replaced,
and the filter service time has been
reset.
If your phone is unable to connect
to the air purifier, simultaneously
press and hold the mode and
the light button for 5 seconds. A
beeping sound indicates that Wi-Fi
has been successfully reset.
2
1
7
Specifications
Name Mi Air Purifier 2H Rated Voltage 100 - 240 V~ PM CADR 260 m3/h *
Model AC-M9-AA Rated Frequency 50/60 Hz Formaldehyde CADR 60 m3/h *
Item Dimensions 240 × 240 × 520 mm Rated Power 31 W Formaldehyde Filtering
Efficiency High
Net Weight Approx. 5.2 kg Noise Level ≤66 dB(A) Wireless Connectivity Wi-Fi IEEE 802.11 b/g/n
2.4 GHz
Effective Coverage 18 - 31 m2PM Filtering
Efficiency High Network Standby Power
Consumption < 2.0 W
Filtration Efficiency 99.97%
For particles with a size of 0.3 PM, the filtration efficiency reaches 99.97%.
Max RF Output
Power Wi-Fi 2.4 G (2400 - 2483.5 MHz): 17.4 dBm
*Tested by thrid party according to GB/T 18801-2015
Connect with Mi Home / Xiaomi Home App
This product works with Mi Home / Xiaomi Home app*.
Control your device with Mi Home / Xiaomi Home app.
Scan the QR code to download and install the app. You will be directed to the connection setup page if the app is installed
already. Or search "Mi Home / Xiaomi Home" in the app Store to download and install it.
Open Mi Home / Xiaomi Home app, tap "+" on the upper right, and then follow prompts to add your device.
*The app is referred to as Xiaomi Home app in Europe (except for Russia). The name of the app displayed on your device
should be taken as the default.
Note: The version of Mi Home app might have been updated, please follow the instructions based on the current app
version.
8
Regulatory Compliance Information
Europe — EU declaration of conformity
We Beijing Smartmi electronic technology limited, hereby, declare that this equipment
is in compliance with the applicable directives and european norms, and amendments.
The full text of the EU declaration of conformity is available at the following internet
address: https://www.mi.com/en/service/support/declaration.html
Disposal and recycling information
All products bearing this symbol are waste electrical and electronic equipment (WEEE
as in directive 2012/19/EU) which should not be mixed with unsorted household waste.
Instead, you should protect human health and the environment by handing over your
waste equipment to a designated collection point for the recycling of waste electrical
and electronic equipment, appointed by the government or local authorities. Correct
disposal and recycling will help prevent potential negative consequences to the
environment and human health. Please contact the installer or local authorities for
more information about the location as well as terms and conditions of such collection
points.
9
Safety Precautions
Moving
Installation
Power cord
Usage
· Turn off the purifier and unplug it before moving.
· The purifier does not work until the filter compartment panel is correctly installed.
· Maintain a distance of 20 cm or more between the air inlets and walls or other objects.
Use the power cord and outlet as follows to avoid fire, electric shocks, or damage:
· Only plug the power cord into suitable power outlets.
· Use the power cord provided by Mi, and do not use any other brand's power cord.
· Always unplug the purifier before performing any maintenance work or transporting it.
· Do not use the provided power cord on any other product.
· Stop using the purifier immediately in the event of abnormal noise, odors, excessive heat or irregular fan rotation.
· Do not put your fingers or foreign objects into the fan grille, air inlet and air outlet.
· Keep hair and bits of fabric away from the purifier, so as not to block the air inlet and outlet.
· Do not sit on, lean on or tilt the purifier.
· When using in conjunction with gas appliances (such as gas stoves, gas water heaters), please ventilate to
avoid carbon monoxide poisoning.
· Do not over-tighten, bend or twist the power cord, as this may cause the core to be exposed or break.
· Do not pull the power cord when unplugging the purifier.
· Do not use improper power outlets.
Autres manuels pour 2H
1
Table des matières
Langues :
Autres manuels Mi Purificateur d'air
