DPM
Operating manual for precision cutting machine
Approved on: 23/02/2017 Approved by: M. Kieble
Contents
Preface.................................................................................................................................................2
Contents.............................................................................................................................................3
1. Notes about the operating manual............................................................................................5
1.1 Note, terms, symbols..............................................................................................................5
1.2 Pictograms............................................................................................................................6
2. Correct use in accordance to the instructions (intended use)................................................7
2.1 Use of the machine ................................................................................................................7
3. Safety..........................................................................................................................................8
3.1 Safety directives and regulations............................................................................................8
3.2 Safety hazards.......................................................................................................................8
3.3 Safety symbols and safety markings of the ejector cutting unit..............................................10
4. Overall view..............................................................................................................................11
4.1 Complete control unit..........................................................................................................13
4.2 Complete linear unit............................................................................................................14
4.3 Clamping prism ..................................................................................................................15
4.4 Support prism.....................................................................................................................16
4.5 Length adjustment ..............................................................................................................17
4.6 Pivoting motor base.............................................................................................................18
4.7 Grinding spindle / cutting wheel...........................................................................................20
4.8 Grinding spindle / cup wheel................................................................................................21
4.9 Rocker bearing....................................................................................................................22
4.10 Spindle bearing...................................................................................................................23
4.11 Technical Data....................................................................................................................24
5. Operation..................................................................................................................................25
5.1 Setting up the machine: .......................................................................................................25
5.2 Machine connections:..........................................................................................................26
5.3 Controls and displays ..........................................................................................................27
5.4 Switching on .......................................................................................................................30
5.5 Switching off.......................................................................................................................30
5.6 Dressing the grinding wheel.................................................................................................30
5.7 Inserting a workpiece ..........................................................................................................30
5.8 Referencing "obtaining zero position"..................................................................................31
5.9 Cut-off grinding..................................................................................................................31
