Metz MECABLITZ 34 AF-3 P Manuel utilisateur

TV • VIDEO • CAMCORDER • MECABLITZ

MECABLITZ 34 AF-3 P

Operating instructions

Foreword

Dear Customer,

We thank you for your conﬁdence in our meca-

blitz MB 34 AF-3P.

The MB 34 AF-3P ﬂashgun has been especially

designed for Pentax AF system cameras.

IMPORTANT: Never mount the ﬂashgun in the

accessory shoe of any other system camera,

otherwise the ﬂashgun’s foot or the camera’s

accessory shoe can be destroyed!

The dedicated contacts in the foot of the MB 34

AF-3P only support the controlling commands

of Pentax AF system cameras.

The following pages give details for the correct

operation of the mecablitz ﬂashgun and summari-

ze its ﬁelds of application.

Please read these operating instructions carefully,

even if, at ﬁrst sight, some points may not appear

to be of interest. Our design work placed

particular

value on ensuring that operation of the mecablitz is

as simple

as possible, but it should be noted that

the system cameras for which the ﬂashgun is

intended offer a great diversity of capabilities.

We wish you much pleasure with your new Metz

ﬂashgun in conjunction

with a Pentax AF system

camera to light up the darkest points, and for

creative ﬂash lighting.

Contents

1. Safety instructions . . . . . . . . . . . . . . . . .4

2. Preparing the mecablitz for use . . . . . . .5

2.1 Power supply . . . . . . . . . . . . . . . . . . . . . .5

2.2 Loading and replacing the batteries . . . . . .5

2.3 Automatic ﬂashgun cut-out circuit . . . . . . .6

2.4 Mounting/Removing the mecablitz . . . . . . .6

3. Setting the mecablitz into operation . . .7

3.1 Preconditions . . . . . . . . . . . . . . . . . . . . . .7

3.2 Switching the ﬂashgun on and off . . . . . . .7

4. Flashgun instructions to the camera . . .8

4.1 Flash-ready indication . . . . . . . . . . . . . . . .8

4.2 Automatic ﬂash sync speed control . . . . . .9

4.3 Correct-exposure indication . . . . . . . . . . .9

4.4 Information displayed in the

camera’s viewﬁnder . . . . . . . . . . . . . . . . .9

5. TTL ﬂash control . . . . . . . . . . . . . . . . . . .10

6. Flash in the individual camera modes . .11

7. Autofocus measuring ﬂash . . . . . . . . . . .11

8. Flash techniques and ﬂash functions . .13

8.1 Automatic ﬁll-in ﬂash . . . . . . . . . . . . . . . .13

8.2 Exposure correction . . . . . . . . . . . . . . . . .13

Lighting and attachments

. . . . . . . . . . . .14

10. Care and maintenance -

Manual ﬁring button

Troubleshooting . . . . . . . . . . . . . . . . . . .15

11. Technical data . . . . . . . . . . . . . . . . . . . . .16

Lighting distances . . . . . . . . . . . . . . . . . .17

1. Safety instructions

•NEVER ﬁre a ﬂash in the immediate vicinity of

the eyes! Flash ﬁred directly in front of the eyes

ofapersonoranimalcandamagetheretinaand

leadto severevisual disorders- evenblindness!

• Spent batteries should be immediately remo-

ved. Chemicals leaking out of spent batteries

will damage the ﬂashgun.

• Do not short-circuit batteries! DANGER OF

EXPLOSION!

• Batteries should not be exposed to excessive

heat, for instance sunshine, ﬁre and the like!

•NEVER throw spent batteries in a ﬁre!

• Do not expose the ﬂashgun to dripping or

splashing water!

• Protect the ﬂashgun against excessive heat and

high humidity levels! Do not keep the ﬂashgun

in the glove compartment of a car!

• In the event of ﬂash shots with full light output

observe an interval of at least 3 minutes after a

series of 20 ﬂashes. This will protect the ﬂash-

gun against overload.

•

NEVER place material that is impervious to light

in front of, or directly

on, the reﬂector screen.

The reﬂector screen must be perfectly clean

when a ﬂash is ﬁred. The high energy of the

ﬂash light will burn the material or damage the

screen if this is not observed!

•NEVER dismantle the ﬂashgun! DANGER: HIGH

VOLTAGE! There are

no components inside the

ﬂashgun that can be repaired by a layperson.

Disposal of batteries

Do not dispose of spent batteries with domestic

rubbish.

Please return spent batteries to collecting points

should they exist in your country!

2. Preparing the mecablitz for use

2.1 Power supply

The ﬂashgun can only be operated with 2 CR2-type lithi-

um batteries. This type of battery can be stored for many

years with practically no loss of energy, thus making it

ideal for occasional amateur ﬂash photography.

Batteries have become discharged or spent

when recycling takes more than 60 seconds.

The batteries should be removed from the

mecablitziftheﬂashgunisnotgoingtobeused

for a prolonged period.

2.2 Loading and exchanging batteries

• Turn off the ﬂashgun with the main switch.

• Press the unlocking catch, slide the battery

compartment lid to the right and fold open (see

ﬁg. 1).

• Insert the batteries according to the indicated

battery symbols.

The supplied lithium batteries are expendables

and, as such, are not subject to our warranty pro-

visions.

After the batteries have been inserted, fold down

the battery compartment lid, and push to the left

until it engages audible with the unlocking catch.

☞

☛

➭

Fig. 1: Unlocking and exchanging batteries

2. Preparing the mecablitz for use

When loading the batteries ensure correct pola-

rity.Incorrectlyloadedbatteriescandestroythe

ﬂashgun! All batteries must be of the same

make and have the same charge level.

Exhau-

sted batteries must not be thrown into the

dustbin! Contribute to the protection of the

environment and discard exhausted batteries

at the appropriate disposal points.

2.3 Automatic ﬂashgun switch-off

To avoid accidental battery discharge the ﬂashgun

automatically switches itself off to save power

approximately 8 minutes after

- the ﬂashgun was switched on

- the last ﬂash was ﬁred

- tripping the camera release, or

- switching on the camera light metering system.

The green ﬂash-ready indicator is turned off.

To turn on the mecablitz again switch the main

switch OFF and then ON. The ﬂashgun should

always be turned off if it is not being used.

2.4 Mounting/Removing the ﬂashgun

Mounting:

• Turn off the mecablitz.

• Turn the clamping nut upwards against the

case of the ﬂashgun.

• Slide the mecablitz foot completely into the

camera's accessory shoe.

• Turn the clamping nut downwards against the

camera body, thereby securing the ﬂash unit.

Removing:

• Switch off the ﬂash unit before it is removed.

• Turn the clamping nut upwards against the

case of the ﬂashgun and remove the ﬂash unit

from the camera.

☞

3. Setting the mecablitz into operation

3.1 Preconditions

The mecablitz must only be used with TTL

ﬂash controlled autofocus cameras!

The sensor of TTL ﬂash controlled cameras

measures the light reaching the ﬁlm through

the camera lens and instantly cuts out the

ﬂash when the ﬁlm has been correctly expo-

sed. Please refer to the camera’s operating

instructions to ﬁnd out whether your camera

features this function.

A full-power ﬂash is ﬁred if the camera does

not feature TTL ﬂash control!

In other words: Without TTL ﬂash control, the meca-

blitz ﬁres an unmeasured ﬂash at maximum output.

The camera's integrated ﬂash may be additio-

nally used only if it can be completely folded out

into its operating position.

An incompletely folded out camera ﬂash unit

can be damaged when the shutter release is

tripped.

Fig. 3: Switching the ﬂashgun on and off

OFF ON

3.2 Switching the ﬂashgun on and off

Set the main switch in the ON position to turn on

the ﬂashgun. The green ﬂash-ready indicator

lights up to indicate ﬂash readiness.

Set the main switch in the OFF position to turn off

the ﬂashgun.

4. Flashgun instructions to the camera

The mecablitz transmits different signals and

messages to the camera when it is connected to

the camera and is switched on.

4.1 Flash-ready indication

The green light on the mecablitz illuminates

when the ﬂash capacitor is fully primed, thereby

indicating ﬂash readiness. This means that ﬂash

can be used for the next exposure. The ﬂash rea-

diness signal is transmitted to the camera where it

is indicated by a corresponding display in the

camera’s viewﬁnder. Depending on the selected

operating mode, the camera is changed to ﬂash

sync speed when ﬂash readiness is reached. The

ﬂash will not be ﬁred if the shutter is released

before the ﬂash ready light illuminates with the

result that the exposure may be incorrect if the

cameracontrol circuit hasalready changed overto

ﬂash sync speed. Please refer to the camera’s

operating instructions for further details.

4.2 Automatic ﬂash sync speed control

Flash readiness has the following effect on

system cameras:

Camera mode: Effect:

Programmed auto exposure mode [P]:

Camera changes to 1/30 - 1/250 sec. ﬂash sync

speed, depending on camera model.

Aperture priority mode[Av]: As in [P]

Shutter priority mode [Tv]:

Shutter speeds can be set on the camera that

equal or are slower than the sync speed.

Manual mode [M]: As in [Tv]

Note: If (independent of the operating mode) a

shutter speed faster than the ﬂash sync speed is

set on the camera, the camera will automatically

change to ﬂash sync speed when ﬂash readiness

is reached.

Refer to the camera's operating instructions for

details.

4. Flashgun instructions to the camera

Fig. 4: Exposure o.k.

4.4 Information displayed in camera viewﬁnder when

ﬂash unit is switched on

Displays in viewﬁnder Meaning

prior to shutter release

not illuminated Flash unit not yetready for ﬁring

or blinks slowly

permanently illuminated

Flash unit is ready for ﬁring

Warning with SF1/SFx: is illuminated in the camera's

viewﬁnder but the ﬂash is not triggered when the shutter

is tripped. The camera has activated the triggering lock

because the ambient light is too bright.

Displays in viewﬁnder Meaning

prior to shutter release

blinks quickly Flash was sufficient for correct

exposure

not illuminated or Flash was insufficient. Select

blinks slowly

wider f/stop or shorten distance.

4.3 Correct-exposure indication (see ﬁg. 4)

The red correct exposure light brieﬂy illuminates

when ﬂash exposure was correct. At the same

time the mecablitz sends an o.k. signal to the

camera for display in the viewﬁnder.

Please refer to the camera’s operating instructions

for further details.

5. TTL ﬂash control

The mecablitz receives its information exclusively

from the connected TTL-controlled AF-camera.

Exposure measurement in TTL mode (TTL =

through-the-lens) is completed by the camera’s

sensor. This sensor measures the light reaching

the ﬁlm through the camera lens. An electronic

control circuit within the camera transmits a stop

signal to the ﬂashgun as soon as the ﬁlm has been

exposed by the correct amount of light; the ﬂash is

then instantly cut out.

The advantage of the TTL mode is that all factors

inﬂuencing the exposure of the ﬁlm (such as ﬁl-

ters, change of aperture or variable aperture

zooms)are taken intoaccount. Youneed notworry

about adjustment of the light output. The camera’s

electronic system automatically deﬁnes the requi-

red amount of light. You can also utilize various

metering facilities

(e.g. spot , matrix or centre-

weighted overall readings)

offered by some came-

ras.

The table on page 33 gives the maximum range

for the selected aperture. The minimum lighting

distance is approx. 15% of the maximum thres-

hold range.

If the actual distance is shorter than the

minimum lighting distance, then this may

result in overexposure.

The speed of ﬁlms to be exposed under

TTL ﬂash control must be between ISO

25/15°* and ISO 1000/31°. Correct expo-

sures cannot be guaranteed with other

ﬁlm speeds.

Astrip ofﬁlmmust beloadedin thecamera iftests

are to be conducted in TTL ﬂash mode. The effec-

tive ﬂash range can only be checked by the cor-

rect-exposure display (o.k.) if the ﬂash is triggered

by the camera and not with the manual release on

the ﬂashgun!

* With automatic ﬁlm speed setting (DX): ISO 32/16°

Autres manuels pour MECABLITZ 34 AF-3 P

Table des matières

Autres manuels Metz Flash de l'appareil photo

Metz

Metz MECABLITZ 44 AF-1 Manuel utilisateur

Metz

Metz MECABLITZ 40 AF-4 N Manuel utilisateur

Metz

Metz MECABLITZ 36 AF-5 C digital Manuel utilisateur

Metz

Metz MECABLITZ 50 AF-1 Manuel utilisateur

Metz

Metz MECABLITZ 58 AF-2 digital Manuel utilisateur

Metz

Metz mecablitz 64 AF-1 digital Manuel utilisateur

Metz

Metz MECABLITZ 44 AF-3 N Manuel utilisateur

Metz

Metz mecablitz 52 AF-1 Manuel utilisateur

Metz

Metz 44 AF-4 Manuel utilisateur

Metz

Metz mecablitz M400 Manuel utilisateur

Metz

Metz Mecablitz 34 BCT 2 Manuel utilisateur

Metz

Metz mecablitz 64 AF-1 digital Manuel utilisateur

Metz

Metz MECABLITZ 44 AF-4 C Manuel utilisateur

Metz

Metz mecablitz 52 AF-1 Manuel utilisateur

Metz

Metz MECABLITZ 34 AF-3 N Manuel utilisateur

Metz

Metz MECABLITZ 45 CL-4 digital Manuel utilisateur

Metz

Metz AF-1 Manuel utilisateur

Metz

Metz mecablitz 64 AF-1 digital Manuel utilisateur

Metz

Metz MECABLITZ 45 CL-4 digital Manuel utilisateur

Metz

Metz MECABLITZ 28 CS-2 digital Manuel utilisateur

Metz

Metz mecablitz26 AF-2 Manuel utilisateur

Metz

Metz Mecablitz 28 AF-4 N Manuel utilisateur

Metz

Metz MECABLITZ 58 AF-1 C digital Manuel utilisateur

Metz

Metz mecablitz 26 AF-1 digital Manuel utilisateur

Manuels Flash de l'appareil photo populaires d'autres marques

Canon

Canon 5246B002 Manuel utilisateur

Sigma

Sigma EF-610 DG SUPER - Manuel utilisateur

Godox

Godox DP300 Manuel utilisateur

Sony

Sony HVL-FDH4 Manuel utilisateur

Sony

Sony HVL-RLA Manuel utilisateur

Nikon

Nikon SB-28 Manuel utilisateur

Canon

Canon Speedlite 380EX Manuel utilisateur

Olympus

Olympus FL 36R Manuel utilisateur

Nikon

Nikon BC-7 Manuel utilisateur

Altura Photo

Altura Photo AP-305N Manuel utilisateur

Nikon

Nikon SB-800 Manuel utilisateur

DÖRR

DÖRR DFX-300 Manuel utilisateur

Canon

Canon SPEEDLITE 300EZ Manuel utilisateur

Sunpak

Sunpak 622 Super Pro-System Manuel utilisateur

Polaroid

Polaroid PL108-AF Manuel utilisateur

Godox

Godox Thinklite TT350P Manuel utilisateur

Pentax

Pentax AF240Z Manuel utilisateur

Pixapro

Pixapro Li-ion 350 II N Manuel utilisateur