3
3 Quick Start with a CD
LE PLAYER®3+ internal power supply is adjusted at the factory for a nominal voltage corresponding to the
electrical network of your country.
Install LE PLAYER®3+ unit on a Hi-Fi rack or on a stable and strong support.
Do not install the unit directly on a carpet or flammable material.
Do not put any object on the top of the unit.
Before starting open the remote control and insert the provided batteries.
A. Plug the unit to the AC with the supplied power cord or compatible cord
B. Plug the analogue outputs to your amplifier or pre-amplifier
C. Start the unit with the main power switch, the screen lights up
D. Open the drawer, put a CD and close the drawer
E. Press on Play on the touchscreen
Should it fail to operate:
- Turn off and unplug the unit
- Check the fuses
- Start again the Quick Start procedure
- If there is no difference, please contact Métronome Technologie Factory.
The touchscreen should be alight when the unit operates.
Thepowersupplycanbeswitchedonduringalongperiod.Betweenlisteningsessions,pleaseputthedeviceon
stand-by. For a prolonged absence, it is advised to switch it off and unplug the unit from the AC network.
The powersupply isprotectedbyinternalelectronic circuitsandbyageneralfuselocatedinthe block nearthe
maincordbesidetheswitch.Tochangethefuse,itismandatorytounplugthemainpowercablebeforeopening
the fuse compartment with ascrewdriver.Then replace thefusebythesamemodel:1A,temporised fuse(eq.
slow burn). NEVER CHANGE THE FUSE VALUE.
