Metronome Calypso Manuel utilisateur
Calypso Reference
- 2/19 -
M E T R O N O M E T E C H N O L O G I E
Calypso Reference
CD Transport
Made in France
- 3/19 -
Warning: Potential Shock Hazard!
This symbol is intended to alert the
user of the presence of important
operating and maintenance
(servicing) instructions in the
literature accompanying the
appliance
This symbol is intended to alert the
user of the presence of uninsulated
“dangerous voltage” within the
product ‘s enclosure that may be of
sufficient magnitude to constitute a
risk of electric shock to persons
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE
This product uses high voltage. There are no operator serviceable parts inside.
Refer servicing to qualified personnel only.
Observe all warnings and instructions marked on the product.
Use only a grounded outlet.
Do not install or use this product near water or when you are wet.
Install the product securely on a stable surface.
During operation the vacuum tubes (if any) become hot: do not touch.
Information
Marking by the “CE” mark indicates compliance of this device with the EMC
(Electromagnetic Compatibility) and LVD (Low Voltage Directive) directives of the
European Community.
Before operating the unit, please read through these manual
so you will know how to operate your model properly.
- 4/19 -
TABLE OF CONTENTS
1 - PREFACE
2 - IMPORTANT SAFETY INSTRUCTIONS
3 - SETTING UP OVERVIEW
3-1 Unpacking
3-2 Positioning
4 - LOCATION & PARTS DESCRIPTION
4-1 Silent Base
4-2 Elektra Power Supply
4-2-1 Front panel layout
4-2-2 Rear panel layout
4-2-3 New feet & cones
4-3 Calypso Reference CD Transport unit
4-3-1 Front panel layout
4-3-2 Rear panel layout
4-4 Remote Layout
5 - OPERATING INSTRUCTIONS
5-1 Elektra Power Supply
5-2 Calypso Reference CD Transport unit
5-3 Protection
5-4 RC1 Remote Control
5-5 Cleaning
6 - SPECIFICATIONS
6-1 Product overview
6-2 Technical data
7 - WARRANTY
CERTIFICATE OF AUTHENTICITY
- 5/19 -
1 – PREFACE
Congratulations
You have just acquired the finest component to deliver the best sound for the playback of
CD audio and musical reproduction. The Top Loaded Calypso Reference CD transport is
made from material selected for the ability to deliver the best sound.
This innovative design is an aesthetic way to extract digital information for the best sound
from CD media.
The Calypso Reference is the best result of many months of technical research, testing and
countless hours of listening.
Company profile
METRONOME TECHNOLOGIE is a French company founded in 1987 by
Dominique Giner. They have developed over the years a wide range of High End products.
The making of all METRONOME TECHNOLOGIE models comply with two main
objectives:
1. Aesthetically pleasing with a high level of quality inside and outside the box.
2. The best possible sound in line with this price range.
Each unit is delivered with vibration draining cone points, fitting 3 Delrin® feet to increase
stability and vibrations control. Great care is taken in power supplies engineering and in
details which really matter. The compact line is optimized to ensure best mechanical
rigidity while working with any décor, assuring a lasting satisfaction in your investment.
- 6/19 -
2 – IMPORTANT SAFETY INSTRUCTIONS
1. ALWAYS disconnect your entire system from the AC mains before
connecting or disconnecting any cables, or when cleaning any component.
2. A three-conductor AC mains power cord which includes an earth ground connection
must be used. To prevent shock hazard, all three connections must ALWAYS be
used.
3. Original AC main power cord is recommended for use with this product.
4. NEVER use flammable or combustible chemicals for cleaning.
5. NEVER operate this product with removed cover.
6. NEVER wet the inside of this product with any kind of liquid.
7. NEVER pour or spill liquids directly onto this unit.
8. NEVER block air flow through ventilation slots or heat-sinks.
9. NEVER bypass any fuse.
10. NEVER replace any fuse with a value or type other than those specified.
11. NEVER attempt to repair this product: contact your retailer.
12. NEVER expose this product to extremely high or low temperatures.
13. ALWAYS unplug sensitive electronic equipment during lightning storms.
- 7/19 -
3 – SETTING UP OVERVIEW
3-1 Unpacking
The Calypso Reference has been packed into three cartons:
1. Calypso Reference CD transport unit :
Small cases with Accessories
x 1 Black metal Remote Control RC1 with 2 batteries CR2025 type
x 1 Delrin® CD clamp,
x 1 Key to dismount the remote control to change the batteries,
2. One Farad Power Supply (Elektra):
Power cord,
Very Hugh Quality 16 wires cord between Calypso and Elektra Power
Supply.
3. Silent Base:
x 3 Stainless steel balls,
x 3 Stainless steel cylinder to apply under Delrin feet.
x 3 curved stainless steel cylinder.
Carefully unpack the units: take care that you may need the help of a second person to lift
it. Carefully preserve packages and protections. They will be useful to properly pack the
unit any time shipment is needed. It is the best protection to preserve the unit from damage
or delay. Please note that the warranty will be considered as cancelled if the dispatched
units are packed incorrectly.
3-2 Positioning
Set down the Calypso on the silent base support. Do not put it straight down a carpet or
any flammable material. Connect the Calypso to its Elektra power supply and be sure to
turn off the power of all components before making connections and connect securely to
prevent noise.
Connect the power cable to the wall outlet.
- 8/19 -
4 – LOCATION & PARTS DESCRIPTION
4-1 Silent base
Installation :
1) Place the curved cupels on a strong support,
2) Put the 3 stainless steel balls in the middle of these,
3) Put down the Delrin base with upper feet above.
Finally you can rest the Calypso CD transport like it :
- 9/19 -
4-2 Elektra power supply for Calypso
4-2-1 Front Panel Layout :
Main switch : “on / off” main power switch for the power supply
Blue Led : Immediately after activated the main current with the switch on the front
face of power supply, this led will blinks during approximately 15 seconds. Once all
regulations stabilized , this led keeps alight.
Display switch: * up : Calypso’s display is ON, * Down : Calypso’s display is OFF.
4-2-2 Rear Panel Layout :
Power Supply Connector: To connect the Elektra power supply to the Calypso
CD Transport (Very High Quality 16 wires cable & connector).
Power entry connector to plug the power, fuse compartment is into the chassis, to
change fuses if broken you must to unscrew the 8 screws of the top cover.
2
4 5
2
4
5
1 3
3
1
- 10/19 -
Due to high capacity ( 1,2 Farad ), the power supply takes some seconds to obtain
values desired.
Once the capacitors and voltages come with nominal values, the led will be
continuous alight and your Calypso will be started.
4-2-3 Feet & cones:
Magnet: This magnet keeps the cone fixed under the foot
A
A
Table des matières
Autres manuels Metronome Lecteur CD
