Metrohm 930 Compact IC Flex Manuel
930 Compact IC Flex
930 Compact IC Flex Oven SeS/PP/Deg
Manual – Short Instructions
8.930.8120EN / 2017-07-31
Metrohm AG
CH-9100 Herisau
Switzerland
Phone +41 71 353 85 85
Fax +41 71 353 89 01
www.metrohm.com
930 Compact IC Flex
930 Compact IC Flex Oven
SeS/PP/Deg
2.930.2560
Manual – Short Instructions
8.930.8120EN / 2017-07-31 zst
Technical Communication
Metrohm AG
CH-9100 Herisau
This documentation is protected by copyright. All rights reserved.
This documentation has been prepared with great care. However, errors
can never be entirely ruled out. Please send comments regarding possible
errors to the address above.
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ Table of contents
930 Compact IC Flex Oven SeS/PP/Deg (2.930.2560) ￭￭￭￭￭￭￭￭ III
Table of contents
1 About these short instructions 1
2 Introduction 2
2.1 Instrument description ......................................................... 2
2.2 Intended use ......................................................................... 4
2.3 Safety instructions ................................................................ 5
2.3.1 General notes on safety ........................................................... 5
2.3.2 Electrical safety ........................................................................ 5
2.3.3 Tubing and capillary connections ............................................. 6
2.3.4 Flammable solvents and chemicals ........................................... 6
2.3.5 Recycling and disposal ............................................................. 6
2.4 Symbols and conventions .................................................... 7
3 Overview of the instrument 8
3.1 Front ...................................................................................... 8
3.2 Rear ........................................................................................ 9
4 Installation 11
4.1 Setting up the instrument .................................................. 11
4.1.1 Packaging .............................................................................. 11
4.1.2 Checks .................................................................................. 11
4.1.3 Location ................................................................................ 11
4.2 Capillary connections in the IC system ............................. 11
4.3 Removing transport locking screws .................................. 12
4.4 Connecting the drainage tubing and leak sensor ............ 14
4.4.1 Installing the drainage tubing ................................................ 14
4.4.2 Connecting the leak sensor .................................................... 15
4.5 Column oven ....................................................................... 16
4.6 Connecting the eluent bottle ............................................. 16
4.7 Connecting the eluent degasser ........................................ 18
4.8 Installing the high-pressure pump .................................... 19
4.9 Installing an inline filter ..................................................... 19
4.10 Installing the pulsation absorber ...................................... 19
4.11 Injection valve ..................................................................... 19
4.12 Metrohm Suppressor Module (MSM) ............................... 19
4.12.1 Inserting the rotors ................................................................ 20
4.12.2 Connecting the Metrohm Suppressor Module (MSM) ............. 21
Table of contents ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
IV ￭￭￭￭￭￭￭￭ 930 Compact IC Flex Oven SeS/PP/Deg (2.930.2560)
4.13 Peristaltic pump .................................................................. 24
4.13.1 Installing the peristaltic pump ................................................ 24
4.14 Metrohm CO2 Suppressor (MCS) ....................................... 26
4.14.1 Connecting the MCS ............................................................. 26
4.14.2 Installing adsorption cartridges .............................................. 26
4.15 Installing the conductivity detector .................................. 28
4.16 Installing the amperometric detector ............................... 29
4.17 Connecting the sample degasser (optional) ..................... 29
4.18 Connecting the instrument to a computer ....................... 30
4.19 Connecting the instrument to the power grid ................. 31
4.20 Initial start-up ..................................................................... 32
4.21 Connecting and rinsing the guard column ....................... 34
4.22 Connecting the separation column ................................... 35
4.23 Conditioning ........................................................................ 37
5 Operation 39
6 Accessories 40
Index 41
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ Table of figures
930 Compact IC Flex Oven SeS/PP/Deg (2.930.2560) ￭￭￭￭￭￭￭￭ V
Table of figures
Figure 1 Front ................................................................................................. 8
Figure 2 Rear .................................................................................................. 9
Figure 3 Removing the transport locking screws ............................................ 13
Figure 4 Installing tubing weighting and aspiration filter ................................ 18
Figure 5 Metrohm Suppressor Module (MSM) – Connection capillaries .......... 22
Figure 6 Connecting the MCS ....................................................................... 26
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 1 About these short instructions
930 Compact IC Flex Oven SeS/PP/Deg (2.930.2560) ￭￭￭￭￭￭￭￭ 1
1 About these short instructions
This short instruction manual contains important chapters from the com-
prehensive manual. In addition to an introduction, safety instructions and
an overview of the instrument, you will also find information about instal-
ling and operating the 930 Compact IC Flex Oven SeS/PP/Deg as well as
information regarding the warranty. You can download the comprehen-
sive manual as a PDF file from the Internet.
Downloading the manual
You can find the detailed manual on the Internet under
http://www.metrohm.com/:
1. Enter the order number for your instrument as the search term (e.g.
2.930.2560).
2. Click on >More information.
3. Click on Documents.
All available documents for the instrument will be displayed.
4. Click on the PDF link to download the desired manual.
2.1 Instrument description ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
2￭￭￭￭￭￭￭￭ 930 Compact IC Flex Oven SeS/PP/Deg (2.930.2560)
2 Introduction
2.1 Instrument description
The 930 Compact IC Flex is a robust ion chromatograph. It is distinguished
by:
￭Its intelligence: All of the functions are monitored, optimized and docu-
mented in an FDA-compatible manner. Intelligent components, such as
iColumns, save important data onto a chip.
￭Its compact design: It has a small footprint.
￭Its transparency: All components are easily accessible and located for
simple visibility and can be monitored during operation through a large
window.
￭Its safety: The wet end and the electronics are physically separated,
thereby preventing fluids from coming into contact with the electronics
to a large extent. A leak sensor is integrated into the wet end.
￭Its environmental compatibility.
￭Its low noise emission.
￭The intelligent MagIC Net software.
The 930 Compact IC Flex is operated using the MagIC Net software. A
USB cable is used to connect the instrument to a computer with
MagIC Net installed. The intelligent software detects the instrument auto-
matically and checks its functionality. The software controls and monitors
the instrument, evaluates the measured data and manages it in a data-
base.
The 930 Compact IC Flex Oven SeS/PP/Deg consists of the following mod-
ules:
Housing
The sturdy housing contains the instrument's electronic components,
including their interfaces and one connector for a separation column. In
addition, the housing provides space for a conductivity detector or an
amperometric detector. Capillaries and cables can be fed into and out of
the instrument through several openings.
Leak sensor
The leak sensor detects leaking liquid that collects in the instrument's base
tray. Liquid that leaks in the instrument is routed to the base tray using
drainage tubing and detected there.
Autres manuels pour 930 Compact IC Flex
4
Table des matières
Autres manuels Metrohm Instrument de mesure
Metrohm
Metrohm NIRS DS2500 Manuel utilisateur
Metrohm
Metrohm Mira M-3 Manuel utilisateur
Metrohm
Metrohm 912 Manuel utilisateur
Metrohm
Metrohm 930 Compact IC Flex ChS/PP/Deg Manuel utilisateur
Metrohm
Metrohm NIRS DS2500 Manuel utilisateur
Metrohm
Metrohm Mira DS Series Manuel utilisateur
Metrohm
Metrohm 894 Professional CVS Manuel utilisateur
Metrohm
Metrohm 946 Portable VA Analyzer Manuel utilisateur
Metrohm
Metrohm NIRS Manuel utilisateur
Metrohm
Metrohm Mira M-1 Manuel utilisateur
Metrohm
Metrohm NIRS DS2500 Manuel utilisateur
Metrohm
Metrohm Mira P Manuel utilisateur
Metrohm
Metrohm 862 Manuel utilisateur
Metrohm
Metrohm NIRS DS2500 Manuel utilisateur
Metrohm
Metrohm E1620 Manuel utilisateur
Metrohm
Metrohm 6.02101.020 Manuel utilisateur
Metrohm
Metrohm MIRA Cal DS Instructions de fonctionnement
Metrohm
Metrohm 7010 TOC Manuel utilisateur
Metrohm
Metrohm NIRS XDS Manuel utilisateur
Metrohm
Metrohm 917 Coulometer Manuel utilisateur
Manuels Instrument de mesure populaires d'autres marques
Endress+Hauser
Endress+Hauser Proline Promag 50 Caractéristiques techniques
Siemens
Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces
KLINGER
KLINGER CMF V Series Manuel utilisateur
EXFO
EXFO FTB-2 Manuel d'exploitation et d'entretien
Keysight
Keysight M8290A Manuel utilisateur
ADTEK
ADTEK MW-5 Manuel utilisateur