Meteor GG501701 Guide de configuration rapide

ASSEMBLY, USE
AND INSTRUCTION MANUAL
Meteor EN
READ THE OPERATING INSTRUCTIONS
BEFORE USING THE APPLIANCE.
FOR OUTDOOR USE ONLY.
!
GG501701
EDITION
Black
4B

Warnings.................................................................3
Technical data .........................................................4
Gas category............................................................4
Explotion drawing .................................................... 5
Parts list ................................................................ 6
Hardware................................................................7
Assembly instructions ................................................8
Gas leak test ......................................................... 16
Connecting gas .......................................................17
Before using the grill................................................18
Grilling tips............................................................19
Lighting instructions ................................................20
Warnings ...............................................................21
Maintenance ..........................................................22
Cleaning ...............................................................22
Troubleshooting ....................................................23
Consumer Contact .................................................24
Contents
2

WARNINGS
!Failure to follow the instructions provided can imply a risk of
serious injury to personnel and xed installations.
!Some grill parts can be sharp, we recommend wearing gloves
when assembling and lifting. Sharp edges can cause injury.
!The grill is intended for outdoor use only in well-ventilated areas.
Never grill in enclosed spaces or under a roof, due to the danger of the
lack of oxygen.
!Accessible parts of the grill become very hot during use.
Keep children and others who need supervision at a safe distance.
!Do not move the grill while in use or connected to the gas bottle.
Shut off the gas on the regulator after use and disconnect from the
gas bottle.
! Modication of the grill can cause danger and will invalidate
the warranty.
!Never keep the gas bottle under the grill when in use. Gas leaks
can cause serious damage. Place the gas bottle by the side of the grill
during use.
! Do not place the grill cover or other ammable material in the
compartment under the grill when it is in use or hot.
!Do not use lava stones, charcoal or briquettes.
!Clean the grill regularly and thoroughly.
!
3

Technical data — Meteor 4B
Total effect: 12,96 kW
Total gas consumption: 943 g/h.
Hose and regulator (not included):
Must be approved according to
EN standard.
Gas bottle (not included): Use standard
bottle approved for use in the Nordic
Region, 10/11 kg recommended. Even
though butane and propane gas can be
used, we recommend propane for use in
the Nordic Region. Approved hoses and
regulators are available from most outlets
selling gas equipment.
NB!
Gas hoses used for this product must
not exceed 150 cm in length.
Gas information 0359-16
This product is produced according to EUROPEAN GAS APPLIANCE
STANDARD EN498 AND EN484 and is CE certied.
COUNTRIES
OF USE VALVE SIZE GAS TYPE GAS CATEGORY
BE, CY, CZ, DK,
EE, FI, FR, HU, IT,
LT, NL, NO, SE, SI,
SK, RO, HR, TR,
BG, IS, LU, MT
0.89 mm
G30 (butan), G31
(propan) and mixture
of these,
LPG 28~30 mbar
I3B/P(30)
H: 125 cm
L: 130 cm
D: 56 cm
4

Exploded drawing
A3
B1
B7 B8
B9
C8
C11
C3
C2
C9
C6
C7
C5C4
B3
A2
A1
C1
D9
B6
B5
C10
B11
B2
B10
B4
5

Parts list
When ordering spare parts, please use
the code from parts list found here.
CODE PART QTY Meteor 4 Burner Gas BBQ
HOOD
A1 Hood (Pre-Assembled to Body) 1
A2 Hood Handle 1
A3 Warming Rack 1
BODY
B1 Barbecue Body 1
B2 Burner 4
B3 Control Panel 1
B4 Knob 4
B5 Flame Tamer 4
B6 Cooking Grill 2
B7 Drip Tray Left Bracket 1
B8 Drip Tray Right Bracket 1
B9 Drip Tray 1
B10 Drip Tray Handle 1
B11 Ignition Button 1
TROLLEY
C1 Side Shelf 2
C2 Left Side Shelf Panel 1
C3 Right Side Shelf Panel 1
C4 Left Leg 2
C5 Right Leg 2
C6 Front Upper Panel 1
C7 Front Lower Panel 1
C8 Wire Base 1
C9 Wheel 2
C10 Wheel Hubcap 2
C11 Axle 1
HARDWARE
D1 ST4.0x10 Screw 10
D2 M5x15 Bolt 4
D3 Ø5 W asher 4
D4 M5 Nut 4
D5 M6x15 Bolt 12
D6 M6x65 Bolt 12
D7 Ø6 W asher 4
D8 M6 Nut 8
D9 Locknut 2
Pre-Assembled Component
6

Hardware
The following screws and nuts are
supplied with the grill and must be tted.
D6
D7 D8
D5 D1
D5
D6
D8
D3 D4D2
7

TOOLS FOR ASSEMBLING (NOT INCLUDED)
Assembly instructions
0102030405060708090 100 11 0 120 130 140 150
0123456
0102030405060708090 100 11 0 120 130 140 150
0123456
Medium size at blade or
Philips/cross-point screwdriver
Adjustable spanner or
metric spanner set
Ruler
01 02 03 04 05 06 07 08 09 0 100 110 120 130 140 150
01 23 45 6
NB!
Exercise caution when using electric tools –
their strength can damage the screws.
Please follow these instructions step by step.
We recommend two people to assemble the
grill to avoid heavy lifting.
8

1
Attach the Legs (C4,C5) to the Panels (C6,C7) using ST4.0x10 Screws (D1x8pcs) as shown.
Rear view
Front view
C5C4
C6
C7
D1
1
2
Attach the front panel assembly and the Legs (C4,C5) to t he Wire Base ( C8) by inserting the
M6x65 Bolts (D6x4pcs) through the legs, wire base, Ø6 Washers (D7x4pcs) and secure with M6
Nuts (D8x4pcs). Ensure that the holes in the top of each leg which to fix barbecue body are in the
front of the side.
C8
D8
D7
D6
C4C5
Assembly instructions
9

C9
D9 C10
C11
Lay the assembled trolley on its side. Lay t he B arbecue Body (B1) on i ts back and slide into
position between the trolley legs.
CAUTION! Care must be taken to ensure the hood or lid does not fall open unexpectedly
or becomes damaged when it is set on the ground.
Insert the M6x65 Bolts (D6x8pcs) through the guide holes of each leg and screw into barbecue
body tightly.
D6
B1
4
WARNING!
Two persons should
perform this step, due
to heavy lifting.
!
3
Unscrew the Locknuts (D9) from both ends of the Axle (C11).
Slide the axle through the corresponding holes in the left legs. Slide the Wheels (C9) over each
end of t he axle. S ecure the wheels i nto place with the l ocknuts. Place the Wheel Hubcaps
(C10) onto the outside of the wheels.
10
Table des matières
Autres manuels Meteor Gril


















