7
CONNECTION TO VCOM – REGISTRATION
In order to establish a connection to VCOM, you first need to set up a system in VCOM.
After that, you can register in two ways:
1. Via the blue Log web interface
2. Via VCOM
blue’Log web interface
In the “PV System – VCOM” menu, you need to give a system key (e.g. WTTRY), a
VCOM user name and a password and then click on “Registration”.
You can set the transfer interval to the desired frequency. The time indicates how
often the data in VCOM will be updated.
VCOM
Open the “Register Data Logger” tab in the “System Configuration – blue Log
X series – Administration” menu.
Add the blue Log, giving the blue Log hardware number (HW No.), the blue Log user
name and the password.
Note regarding data protection (GDPR)
At this point, we would like to inform you what data we collect when you configure and use the blue’Log.
•
User name, password, e-mail address => hese data are only stored locally on the logger’s SD card
•
E-mail addresses => he e-mail addresses entered in the user administration and the alarm configuration can be
viewed by any user and are transferred to VCOM for information purposes.
Further information regarding data protection at meteocontrol: https://www.meteocontrol.com/en/contact/data-privacy/
