8TBS-Series | Version 1.01
Troubleshooting
7.3 Lubrication Checking
8 Troubleshooting
9 Disposal, recycling of used devices
ImFor environmental benefits it is necessary to ensure
that all components of the machine are only disposed of
by the provided and allowed means.
9.1 Decommissioning
Immediately decommission used machines in order to
avoid later misuse and endangering of the environment
or of persons.
- Dispose of all environmentally hazardous operating
materials of the used device.
- If required, disassemble the machine into easy-to-han-
dle and usable components and parts.
- Supply the machine components and operating mate-
rials to the provided disposal routes.
9.2 Disposal of lubricants
The manufacturer of the lubricant makes the disposal in-
structions for the used lubricants available. If applica-
ble, ask for the product-specific data sheets.
10 Liability for defects (warranty)
The legal regulations apply for our customers who are the con-
sumers. The customer has to give us the opportunity to con-
vince ourselves of the defect and to bring the product at our re-
quest and cost to one of our shops for examination. The
following points apply for our commercial customers:
(1) The customer has to check the delivered goods immedi-
ately upon delivery in particular on defects. He has to inform us
immediately about any determined apparent defects. He also
immediately has to inform the carrier about any transportation
damages and missing packages. If it is not possible to immedi-
ately detect the defects even though the goods are thoroughly
checked, he has to inform us immediately upon detection of the
defects in writing. In this case our customer immediately has to
stop the processing, machining and use of the ordered goods.
The customer has to give us the opportunity to convince our-
selves of the defect and to bring the product at our request and
cost to one of our shops for examination. After execution of an
agreed acceptance, the notice of defects which were identifia-
ble during acceptance shall be excluded. For commercial cus-
tomers, the legal term of liability for defects of 2 years is being
omitted.
(2) The term of liability for defects amounts to one year from the
passing of risk unless otherwise stated in the contract or law. If
the manufacturer of the delivered product grants a longer term
of liability for defects, we assign our rights hereof to the pur-
chaser/buyer already with the purchase of the product. We will
provide you a current list of the individual terms and conditions
of liability for defects of the manufacturers at any time upon
your request.
(3) In case of warranty we will provide rework or replacement in
consultation with the manufacturer at our choice. Necessary
expenses, in particular transportation, travel, labour and mate-
rial costs which are occurring since the purchased product
was transported to another place than the place of fulfilment,
do not imperatively have to be paid by us, unless it is pre-
scribed by the law. If reworks or replacements regarding a
defect demonstrably fail twice or would the repair of the defect
require a disproportionately high effort and the rework is there-
fore refused, the customer may request a reduction of the
reimbursement or an annulment of the contract. We point out to
our customers that there is no case of liability for defect in par-
ticular in case of defects which had been caused at the
premises of the customer due to misuse or improper use and
for defects which had been caused because the products
were exposed to damaging external influences (in particular
extreme temperatures, humidity, exceptional physical or elec-
trical stress, voltage fluctuations, lightning strikes, static elec-
tricity, fire) at the premises of the customer.
(4) If it results in the frame of an examination of the product due
to a notice of defects that the notice of defects was unjustified,
we are entitled to invoice a customary charge for the examina-
tion of the product as well as the transportation costs
(5) Our warranty does neither cover natural wear and tear,
improper use and storage, faulty installation nor damages
which are occurring after the passage of risk due to faulty or
negligent usage, excessive stress, improper operating equip-
ment or due to any other influences which are not provided
according to the contract.
(6) The claim for liability of defects due to an error is excluded
for any repair works performed by the purchaser/buyer or third
parties without our approval or improper repairs by a service
partner that is not authorised by the manufacturer.
Interval of lubrication Activity
Before operation Lubricate blade and bear-
ing of lever
Before operation Lubricate gears
Weekly Lubricate holding down
clamping
Weekly Lubricate bearing of the
cam
Monthly Lubricate rear end stop
Fault Remedy
Formation of fins at
the cutting edge
1. Cutting gap is too big,
new setting of the cutting
gap.
2. Blade dulled, change
blade
Cutted workpiece
doesn´t show the
dimensions of the
setting.
New setting of end stop.
