Merten U.motion KNX Server Plus Manuel utilisateur

U.motion

U.motion KNX Server Plus, Touch 10

U.motion KNX Server Plus, Touch 15

User Manual

Art. no. MEG6260-0410 | MEG6260-0415

04/2014 VERSION 1.0.1

www.merten.com

- 2 -

U.motion KNX Server Plus, Touch

User Manual

GENERAL INFORMATION

Schneider Electric GmbH c/o Merten

Gothaer Straße 29, 40880 Ratingen

www.merten.com

www.merten-austria.at

Customer care centre:

Phone: +49 2102 - 404 6000

Operating instructions, manuals and software are protected by copyright. All rights are reserved. Copying, multiplication,

translation and conversion, either partially or as a whole, is not permitted. You are allowed to make a single copy for

backup purposes.

Note: please read the manual before beginning and keep the manual for later use.

Audience: the manual has been conceived and written for users who are experienced in the use of PCs and automation

technology.

CONVENTIONS

[KEY]

Keys that are to be pressed by the user are given in square brackets, e.g. [CTRL] or [DEL]

Courier

On-screen messages are given in the Courier font, e.g. C:\>

Courier bold

input to be made by the user are given in Courier bold, e.g. C:\>DIR).

„…“ (double quotes)

Names of buttons to be pressed, menus or other onscreen elements and product names are

given within double quotes. (e.g. “Configuration”).

Symbolic

In this manual the following symbolic are used to indicate particular text blocs.

Caution!

A dangerous situation may arise that may cause damage to material.

Note.

Hint and additional notes

- 3 -

U.motion KNX Server Plus, Touch

User Manual

SAFETY INSTRUCTIONS

The present operating instructions contain those safety instructions that are required to safely operate the machine.

All persons working with the machine must heed the present operating instructions, especially the safety instructions.

In addition, all local stipulations governing the prevention of accidents must be heeded.

Only trained and authorized personnel may install and operate the machine.

Proper application: The machine has been designed for application in a building environment.

The machine meets the requirements of the EMC guidelines and of the harmonized European standards. Modifications to

the machine hardware may affect the system’s EMC compatibility.

Without special protection measures, the machine must not be used in EX areas and in plants that require special moni-

toring.

Danger of explosion. Do not expose the buffer batteries to heat. Serious injury may be the result.

The operating voltage of the machine must be within the specified range! The product label provides the required infor-

mation.

- 4 -

U.motion KNX Server Plus, Touch

User Manual

INDEX:

1General Overview___________________________________________ - 7 -

1.1 Introduction ___________________________________________________________________- 7 -

1.2 Requirements__________________________________________________________________- 7 -

1.3 First Access_____________________________________________________________________- 8 -

1.4 Graphical Themes ___________________________________________________________ - 10 -

1.5 Visualisation Layout _________________________________________________________ - 10 -

1.6 Home Page __________________________________________________________________ - 12 -

2Rooms ______________________________________________________ - 13 -

2.1 Introduction _________________________________________________________________ - 13 -

2.2 Navigation between different Rooms ______________________________________ - 13 -

2.3 Rooms in Grid View _________________________________________________________ - 14 -

2.4 Rooms in Background View_________________________________________________ - 18 -

2.4.1 Visualisation ________________________________________________________________ - 18 -

2.4.2 Customization ______________________________________________________________ - 18 -

3Functions ___________________________________________________ - 21 -

3.1 Introduction _________________________________________________________________ - 21 -

3.2 Illumination__________________________________________________________________ - 22 -

3.2.1 Light On/Off ________________________________________________________________ - 22 -

3.2.2 Dimmer _____________________________________________________________________ - 22 -

3.2.3 RGB Light ___________________________________________________________________ - 23 -

3.3 Shadowing, Doors and Windows ___________________________________________ - 24 -

3.3.1 Shutters Up/Down/Stop ____________________________________________________ - 24 -

3.3.2 Shutters Up/Down and Percentage Value___________________________________ - 24 -

3.3.3 Shutters / Curtains with Lamellae ___________________________________________ - 24 -

3.3.4 Door / Window Open/Closed _______________________________________________ - 25 -

3.3.5 Electric Locks________________________________________________________________ - 25 -

3.3.6 State Door / Window Contacts______________________________________________ - 25 -

3.4 Thermoregulation ___________________________________________________________ - 25 -

3.4.1 Thermostats_________________________________________________________________ - 25 -

3.5 Energy Management ________________________________________________________ - 28 -

3.6 Audio_________________________________________________________________________ - 29 -

3.6.1 Multiroom-Audio-Zone _____________________________________________________ - 29 -

- 5 -

U.motion KNX Server Plus, Touch

User Manual

4Favourites __________________________________________________ - 30 -

4.1 Introduction _________________________________________________________________ - 30 -

5Scheduling _________________________________________________ - 31 -

5.1 Introduction _________________________________________________________________ - 31 -

5.2 Scheduling of Objects _______________________________________________________ - 31 -

6Scenarios ___________________________________________________ - 36 -

6.1 Introduction _________________________________________________________________ - 36 -

6.2 Execution / Interruption of Scenarios ______________________________________ - 37 -

6.3 Update of a Scenario ________________________________________________________ - 37 -

6.4 Scheduling of a Scenario____________________________________________________ - 38 -

7Message Central ___________________________________________ - 39 -

7.1 Introduction _________________________________________________________________ - 39 -

7.2 Notifications _________________________________________________________________ - 40 -

7.3 MessageBoard / FamilyBoard_______________________________________________ - 41 -

8IP Cameras _________________________________________________ - 42 -

8.1 Introduction _________________________________________________________________ - 42 -

8.2 Visualisation of the Video Signal ___________________________________________ - 42 -

9Energy Management ______________________________________ - 45 -

9.1 Introduction _________________________________________________________________ - 45 -

9.2 Consumption ________________________________________________________________ - 45 -

9.3 Loads _________________________________________________________________________ - 48 -

10 Weather___________________________________________________ - 51 -

10.1 Introduction _________________________________________________________________ - 51 -

10.2 Weather Preview ____________________________________________________________ - 51 -

10.3 KNX Weather Station _______________________________________________________ - 52 -

11 RSS Feeds _________________________________________________ - 53 -

11.1 Introduction _________________________________________________________________ - 53 -

11.2 Visualisation of Feeds _______________________________________________________ - 53 -

12 Audio / Video _____________________________________________ - 54 -

12.1 Audio Settings _______________________________________________________________ - 54 -

- 6 -

U.motion KNX Server Plus, Touch

User Manual

Notes_______________________________________________________ - 55 -

- 7 -

U.motion KNX Server Plus, Touch

User Manual

1GENERAL OVERVIEW

1.1 INTRODUCTION

U.motion KNX Server Plus Touch is a touch panel for the supervision and visualisation of home & building automation

systems, which have been realized on the basis of the worldwide KNX standard. U.motion KNX Server Plus Touch allows

managing of all functions of the system locally through its display or also remotely through U.motion Client Touch 7,

tablets and smartphones of the last generation, within the same network or remotely via internet.

1.2 REQUIREMENTS

This manual contains all the important information necessary to operate correctly on U.motion KNX Server Plus Touch

within the own system; nevertheless, it is assumed that U.motion KNX Server Plus Touch has first been correctly

configured from the installer by following the INSTALLATION MANUAL.

The instructions in this guide refer to the usage of U.motion KNX Server Plus Touch directly on the touch screen of the

device itself, if not noted differently. For the access from mobile devices the usage of the U.motion Control app is

recommended. For remote control and programming purposes one access from a PC / MAC is possible (multiple accesses

from different PCs / MAC is not supported). In this case the following browsers can be used:

•GOOGLE CHROME (recommended, guarantees maximal compatibility)

•APPLE SAFARI

The usage of the following browsers is not recommended, since their compatibility can’t be fully granted:

•MICROSOFT INTERNET EXPLORER

•OPERA

•MOZILLA FIREFOX

- 8 -

U.motion KNX Server Plus, Touch

User Manual

In order to access the visualisation locally, make sure your own PC / MAC is connected to the same network as U.motion

KNX Server Plus Touch (also via Wi-Fi, if the network supports it). However, if you want to access to U.motion KNX Server

Plus Touch via internet, the local network must be configured to support a remote access via port forwarding. In both

cases, specific addresses must be known:

•For local access: the IP address of U.motion KNX Server Plus Touch within the network

•For remote access via internet: the public IP address of the network to which a connection should be established

These parameters are defined by the installer or network administrator (if present) during the configuration of U.motion

KNX Server Plus Touch and can be obtained from them.

1.3 FIRST ACCESS

After the startup of U.motion KNX Server Plus Touch he will connect autonomously to the visualization. After some

seconds a loading screen will appear. On the first access, the different information is loaded into the local cache and

stored there (HTML-client cache, DB-client cache). These information are used later to navigate in the visualisation and to

command the different objects, by preloading this information is the future access accelerated and the operating is nearly

at real time. Even if the browser is closed or the device is restarted the cache will be kept and no reloading is needed. The

different cache technologies can be disabled if it is wanted, detailed information on how this is realized can be found in

the installation manual.

If not configured in another way, because of special situation, U.motion KNX Server Plus Touch will do an automatic login

into the visualization on start up. If for a special reason U.motion KNX Server Plus Touch must be password protected,

after booting and loading the cache, the following screen will appear on U.motion KNX Server Plus Touch:

- 9 -

U.motion KNX Server Plus, Touch

User Manual

Highlight the box under "USERNAME" and enter the user with which you want to login. Select the field under

"PASSWORD" and enter the password corresponding to the entered user name. Finally click on LOGIN in order to access

the visualisation. With the option “REMAIN CONNECTED”, the login information can be saved and on the next access the

login will be skipped and the login will be made automatically. If it is wanted to login on every access the option can be

disabled by unchecking the box.

A software keyboard will appear on the screen, through which username and password can be entered on the touch

screen of U.motion KNX Server Plus Touch (with the finger).

The same screen will be shown, if an access on U.motion KNX Server Plus Touch is done for remote control or

programming from a PC/MAC. For such purposes a login on the system by entering username and password is always

required.

The credentials of U.motion KNX Server Plus Touch will be defined by the installer and can be obtained from

him. The factory-set login credentials are:

Username

Password

Description

user

Basic user: can use the visualisation of U.motion KNX Server Plus Touch, but

has only very limited access to the configuration of U.motion KNX Server

Plus Touch. This user is configured by default for the automatic login on the

system directly on U.motion KNX Server Plus Touch.

manager

User with access to the most configuration parameters of U.motion KNX

Server Plus Touch, but not to the administrative configurations

admin

System administrator: has full access to the visualisation and configuration.

Hint: If not defined differently by the installer, usernames and passwords are configured in LOWER CASE letters.

- 10 -

U.motion KNX Server Plus, Touch

User Manual

1.4 GRAPHICAL THEMES

U.motion KNX Server Plus Touch provides several THEMES for the graphical interface of the visualisation. The different

THEMES offer the same functionality and the same layout, but differ in color, symbols, etc. The desired THEME can be set

in the configuration area of U.motion KNX Server Plus Touch, as described in the INSTALLATION MANUAL. The following

screenshots show the HOME page of the visualisation area in different THEMES:

1.5 VISUALISATION LAYOUT

Once logged in, the HOME screen will be shown:

The HEADER at the top of the page contains the following elements:

Autres manuels pour U.motion KNX Server Plus

Table des matières

Autres manuels merten Écran tactile

merten

merten KNX Manuel utilisateur

merten

merten MEG6260-0410 Manuel utilisateur

merten

merten Touch 10 Manuel utilisateur

merten

merten U.motion KNX Server Plus Manuel utilisateur

Manuels Écran tactile populaires d'autres marques

FlowLine

FlowLine Data loop Manuel utilisateur

ALPEX

ALPEX AEx-8 P Series Manuel utilisateur

Ltech

Ltech E5S Manuel utilisateur

Harman

Harman AMX MODERO S MSD-701-L2 Manuel utilisateur

Acnodes

Acnodes PC 1150 Manuel utilisateur

AIS

AIS IP10IA99 series Manuel utilisateur

IBASE Technology

IBASE Technology ASTUT-152-RE1S Manuel utilisateur

YASKAWA

YASKAWA TP 610C Manuel utilisateur

B&R

B&R Power Panel C Series Manuel utilisateur

Beijer Electronics

Beijer Electronics X2 control Manuel utilisateur

AXIOMTEK

AXIOMTEK GOT321W-521 Manuel utilisateur

TRIDONIC.ATCO

TRIDONIC.ATCO x-touchBOX Manuel utilisateur

Qomo

Qomo QIT1386 Manuel utilisateur

DFI

DFI KS104-CD Manuel utilisateur

AMX

AMX AXP-PPC Mode d’emploi

Sartorius

Sartorius X3 PR 5410 Manuel utilisateur

AMX

AMX Modero X Series Manuel utilisateur

Advantech

Advantech TPC-30 Series Manuel utilisateur