Merten MEG6260-0410 Manuel utilisateur

U.motion

U.motion KNX Server Plus, Touch 10

U.motion KNX Server Plus, Touch 15

Installation Manual

Art. no. MEG6260-0410 | MEG6260-0415

04/2014 VERSION 1.0.1

www.merten.com

- 2 -

U.motion KNX Server Plus, Touch

Installation Manual

GENERAL INFORMATION

Schneider Electric GmbH c/o Merten

Gothaer Straße 29, 40880 Ratingen

www.merten.com

www.merten-austria.at

Customer care centre:

Phone: +49 2102 - 404 6000

Operating instructions, manuals and software are protected by copyright. All rights are reserved. Copying, multiplication,

translation and conversion, either partially or as a whole, is not permitted. You are allowed to make a single copy for

backup purposes.

Note: please read the manual before beginning and keep the manual for later use.

Audience: the manual has been conceived and written for users who are experienced in the use of PCs and automation

technology.

CONVENTIONS

[KEY]

Keys that are to be pressed by the user are given in square brackets, e.g. [CTRL] or [DEL]

Courier

On-screen messages are given in the Courier font, e.g. C:\>

Courier bold

input to be made by the user are given in Courier bold, e.g. C:\>DIR).

„…“ (double quotes)

Names of buttons to be pressed, menus or other onscreen elements and product names are

given within double quotes. (e.g. “Configuration”).

Symbolic

In this manual the following symbolic are used to indicate particular text blocs.

Caution!

A dangerous situation may arise that may cause damage to material.

Note.

Hint and additional notes

- 3 -

U.motion KNX Server Plus, Touch

Installation Manual

SAFETY INSTRUCTIONS

The present operating instructions contain those safety instructions that are required to safely operate the machine.

All persons working with the machine must heed the present operating instructions, especially the safety instructions.

In addition, all local stipulations governing the prevention of accidents must be heeded.

Only trained and authorized personnel may install and operate the machine.

Proper application: The machine has been designed for application in a building environment.

The machine meets the requirements of the EMC guidelines and of the harmonized European standards. Modifications to

the machine hardware may affect the system’s EMC compatibility.

Without special protection measures, the machine must not be used in EX areas and in plants that require special moni-

toring.

Danger of explosion. Do not expose the buffer batteries to heat. Serious injury may be the result.

The operating voltage of the machine must be within the specified range! The product label provides the required infor-

mation.

- 4 -

U.motion KNX Server Plus, Touch

Installation Manual

INDEX:

1First Commissioning________________________________________ - 9 -

1.1 Introduction ___________________________________________________________________- 9 -

1.2 Content of the Packaging _____________________________________________________- 9 -

1.3 Installation, Connection and Commissioning ______________________________ - 10 -

1.3.1 Installation and Connection_________________________________________________ - 10 -

1.3.2 Environmental Conditions __________________________________________________ - 10 -

1.3.3 Commissioning _____________________________________________________________ - 10 -

1.4 Network Connection ________________________________________________________ - 10 -

1.5 Access ________________________________________________________________________ - 12 -

1.6 Administration and Visualisation Area _____________________________________ - 13 -

2General overview __________________________________________ - 15 -

2.1 Introduction _________________________________________________________________ - 15 -

2.2 Administration Area - Interface ____________________________________________ - 15 -

2.3 Toolbar_______________________________________________________________________ - 16 -

2.4 Navigation Menu ____________________________________________________________ - 17 -

2.4.1 Usage _______________________________________________________________________ - 17 -

2.4.2 Menu Structure _____________________________________________________________ - 20 -

2.4.3 Setup _______________________________________________________________________ - 20 -

2.4.4 Technologies - KNX _________________________________________________________ - 20 -

2.4.5 Technologies –Video Surveillance __________________________________________ - 21 -

2.4.6 Technologies - Intercom ____________________________________________________ - 21 -

2.4.7 Technologies –Energy ______________________________________________________ - 21 -

2.4.8 Customization ______________________________________________________________ - 21 -

2.4.9 Customization –Navigation Menu__________________________________________ - 21 -

2.4.10 Visualisation - Rooms _____________________________________________________ - 22 -

2.4.11 Visualisation - Functions __________________________________________________ - 22 -

2.4.12 Visualisation –Links _______________________________________________________ - 23 -

2.4.13 Visualisation - Scenarios __________________________________________________ - 23 -

2.4.14 Visualisation –Complex objects___________________________________________ - 23 -

2.4.15 Advanced Functions_______________________________________________________ - 23 -

2.5 Search Function _____________________________________________________________ - 24 -

2.6 Workspace ___________________________________________________________________ - 25 -

2.6.1 Overview ____________________________________________________________________ - 25 -

2.6.2 Usage of the Tabs___________________________________________________________ - 26 -

2.6.3 Help_________________________________________________________________________ - 26 -

- 5 -

U.motion KNX Server Plus, Touch

Installation Manual

3Setup _______________________________________________________ - 27 -

3.1 Introduction _________________________________________________________________ - 27 -

3.2 Language ____________________________________________________________________ - 27 -

3.3 Network______________________________________________________________________ - 28 -

3.4 Update _______________________________________________________________________ - 29 -

3.5 Backup/Restore______________________________________________________________ - 29 -

3.6 Date/Time ___________________________________________________________________ - 30 -

3.6.1 Date/Time Configuration ___________________________________________________ - 30 -

3.6.2 Timezone Settings __________________________________________________________ - 30 -

3.6.3 Online Update ______________________________________________________________ - 30 -

3.6.4 Scheduled Services Reboot _________________________________________________ - 30 -

3.7 Display _______________________________________________________________________ - 31 -

3.7.1 Power-Management and Screensaver ______________________________________ - 31 -

3.7.2 Images ______________________________________________________________________ - 31 -

3.7.3 Touchscreen ________________________________________________________________ - 32 -

4Customization _____________________________________________ - 33 -

4.1 Themes_______________________________________________________________________ - 33 -

4.2 Navigation Menu ____________________________________________________________ - 34 -

4.3 Favourites____________________________________________________________________ - 34 -

4.4 Options_______________________________________________________________________ - 35 -

4.4.1 Home _______________________________________________________________________ - 35 -

4.4.2 Mail _________________________________________________________________________ - 36 -

4.4.3 Notifications ________________________________________________________________ - 36 -

4.4.4 Weather_____________________________________________________________________ - 36 -

4.4.5 RSS Feeds ___________________________________________________________________ - 36 -

4.4.6 Internet Bookmark __________________________________________________________ - 37 -

4.4.7 Display-Interaction__________________________________________________________ - 38 -

4.4.8 Advanced ___________________________________________________________________ - 38 -

5KNX_________________________________________________________ - 39 -

5.1 Introduction _________________________________________________________________ - 39 -

5.2 Requirements and Export of the ETS Project ______________________________ - 39 -

5.2.1 OPC-Import _________________________________________________________________ - 39 -

5.3 ETS Import Rules ____________________________________________________________ - 40 -

5.4 ETS Import ___________________________________________________________________ - 41 -

5.5 Selective Import of an ETS Project _________________________________________ - 46 -

5.6 Import of a CSV File _________________________________________________________ - 47 -

- 6 -

U.motion KNX Server Plus, Touch

Installation Manual

5.7 KNX Object Properties ______________________________________________________ - 50 -

5.7.1 KNX Object Details__________________________________________________________ - 50 -

5.7.2 KNX Group Addresses ______________________________________________________ - 52 -

5.7.3 Rooms and Connected Scenarios ___________________________________________ - 53 -

5.7.4 Active and Passive Events ___________________________________________________ - 53 -

5.8 KNX Scenarios _______________________________________________________________ - 54 -

5.9 Physical Address of U.motion KNX Server Plus Touch ____________________ - 55 -

5.10 ETS Gateway _________________________________________________________________ - 56 -

6Rooms ______________________________________________________ - 59 -

6.1 Introduction _________________________________________________________________ - 59 -

6.2 Create new Rooms __________________________________________________________ - 59 -

6.3 Insert Objects into Rooms __________________________________________________ - 64 -

6.4 Deleting Rooms _____________________________________________________________ - 65 -

6.5 Customizing the BACKGROUND View______________________________________ - 65 -

7Functions ___________________________________________________ - 66 -

7.1 Introduction _________________________________________________________________ - 66 -

7.2 Administration of the Functions____________________________________________ - 66 -

7.3 Functions in the Visualisation_______________________________________________ - 67 -

8Complex Objects ___________________________________________ - 69 -

8.1 Introduction _________________________________________________________________ - 69 -

8.2 Create Complex Objects_____________________________________________________ - 69 -

8.3 Object Assignment __________________________________________________________ - 73 -

8.4Generic Complex Object ____________________________________________________ - 74 -

8.5 RGB LED Control_____________________________________________________________ - 76 -

8.6 Audio (Loudspeaker & Microphone) _______________________________________ - 77 -

8.6.1 System Volume _____________________________________________________________ - 77 -

8.6.2 Intercom Volume ___________________________________________________________ - 77 -

9Scenarios ___________________________________________________ - 79 -

9.1 Introduction _________________________________________________________________ - 79 -

9.2 Create Scenarios _____________________________________________________________ - 79 -

9.3 Add Actions to a Scenario __________________________________________________ - 81 -

9.4 Scenarios with Wait Commands ____________________________________________ - 82 -

9.5 Customization of the Wait Commands_____________________________________ - 84 -

- 7 -

U.motion KNX Server Plus, Touch

Installation Manual

10 Links_______________________________________________________ - 85 -

10.1 Introduction _________________________________________________________________ - 85 -

10.2 Creation of Links ____________________________________________________________ - 85 -

10.3 Integration into the Visualisation __________________________________________ - 87 -

10.4 Handling inside the Visualisation___________________________________________ - 87 -

11 Advanced Functions______________________________________ - 88 -

11.1 Introduction _________________________________________________________________ - 88 -

11.2 Logics ________________________________________________________________________ - 88 -

11.3 Conditions ___________________________________________________________________ - 90 -

11.4 Virtual Objects_______________________________________________________________ - 92 -

11.5 Integrators ___________________________________________________________________ - 93 -

11.6 Notifications _________________________________________________________________ - 94 -

11.6.1 Log notifications __________________________________________________________ - 96 -

11.7 Clients and Page Jumps _____________________________________________________ - 97 -

12 IP Cameras________________________________________________ - 99 -

12.1 Introduction _________________________________________________________________ - 99 -

12.2 Visualisation in Local Network_____________________________________________ - 100 -

12.3 Axis Cameras and Videoserver_____________________________________________ - 101 -

12.4 Mobotix Cameras___________________________________________________________ - 102 -

12.5 Generic Video Format (JPG) _______________________________________________ - 103 -

12.6 Visualisation ________________________________________________________________ - 104 -

13 Energy Management ____________________________________- 107 -

13.1 Introduction ________________________________________________________________ - 107 -

13.2 Sections _____________________________________________________________________ - 107 -

13.3 Consumption _______________________________________________________________ - 108 -

13.3.1 Creation of a new Energy Counter _______________________________________ - 108 -

13.3.2 Representation in the Visualisation ______________________________________ - 111 -

13.3.3 Power Calculation ________________________________________________________ - 115 -

13.4 Load Control ________________________________________________________________ - 115 -

13.4.1 General Settings__________________________________________________________ - 115 -

13.4.2 Connection of an Energy Counter________________________________________ - 117 -

13.4.3 Connection of one or more Loads _______________________________________ - 118 -

13.4.4 Representation in the Visualisation ______________________________________ - 119 -

- 8 -

U.motion KNX Server Plus, Touch

Installation Manual

14 Users _____________________________________________________- 122 -

14.1 Introduction ________________________________________________________________ - 122 -

14.2 Users and User Groups _____________________________________________________ - 122 -

14.3 Create new Users ___________________________________________________________ - 122 -

14.4 User Groups and Permissions ______________________________________________ - 124 -

15 Remote Access ___________________________________________- 126 -

15.1 Introduction ________________________________________________________________ - 126 -

15.2 Remote Access through Internet __________________________________________ - 126 -

Notes _____________________________________________________- 127 -

- 9 -

U.motion KNX Server Plus, Touch

Installation Manual

1FIRST COMMISSIONING

1.1 INTRODUCTION

U.motion KNX Server Plus Touch is a Touch-PC for monitoring and visualising home & building Automation systems,

which have been realized on the base of the worldwide KNX standard. The configuration and use of U.motion KNX Server

Plus Touch takes place directly through its web interface, which can be accessed through a conventional browser (from

any device / operating system).

This chapter describes how to connect and configure U.motion KNX Server Plus Touch, so that a successful integration

into the own system can occur.

1.2 CONTENT OF THE PACKAGING

The U.motion KNX Server Plus Touch packaging contains the following material:

U.motion KNX Server Plus, Touch

U.motion Touch Design elements

Connector for power supply and KNX bus

Safety notes/General notes

Quick Start Guide

U.motion USB Stick: documentation and software

RJ45 network cable

RJ45 network adapter

- 10 -

U.motion KNX Server Plus, Touch

Installation Manual

1.3 INSTALLATION,CONNECTION AND COMMISSIONING

1.3.1 INSTALLATION AND CONNECTION

U.motion KNX Server Plus Touch fits into the available mounting units. For a correct function, the following connections

must be guaranteed:

•Power supply 230V AC

•KNX bus connection via supplied connector

•Network connection via CAT5 network cable

Hint: the connection to the KNX bus is not really needed for the configuration of U.motion KNX Server Plus

Touch, but it allows a more efficient programming, since direct tests on the system can be performed.

When commissioning U.motion KNX Server Plus Touch, the following steps must be followed:

Power off the system/installation

Mount U.motion KNX Server Plus Touch into the installed mounting unit

Connect power supply and KNX bus to U.motion KNX Server Plus Touch

Power on the system/installation

Wait until U.motion KNX Server Plus Touch has booted up

ATTENTION!

If the U.motion KNX Server Plus Touch hardware is changed, irreversible damage can occur. Any intervention on

the equipment should be performed only by authorized personnel.

1.3.2 ENVIRONMENTAL CONDITIONS

The correct function of U.motion KNX Server Plus Touch can be granted only if the following requests are met:

OPERATION

Ambient temperature 0°C - 30°C

1.3.3 COMMISSIONING

U.motion KNX Server Plus Touch is power supplied by 230V AC.

1.4 NETWORK CONNECTION

For the usage/configuration of U.motion KNX Server Plus Touch a working network connection is required. In order to

make the first access to U.motion KNX Server Plus Touch, or if a compatible network is not available, follow these steps:

•Connect U.motion KNX Server Plus Touch through a crossed network cable (“crossover-cable”) with your PC

•Open the network configuration of your PC

•Change the settings of the TCP/IP –Protocol (Version 4) of the network interface, on which you connected the

network cable and enter the following values:

•IP address: 192.168.0.100

•Subnet mask: 255.255.255.0

•Gateway: 192.168.0.110

•Save the new settings; depending on the installed OS a restart can be necessary.

ATTENTION! Before commissioning U.motion KNX Server Plus Touch all connections must be checked!

Verify that the voltage of the connected power supply doesn’t exceed the supported voltage range, in order

to avoid damage on the device!

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels merten Écran tactile

merten

merten KNX Manuel utilisateur

merten

merten U.motion KNX Server Plus Manuel utilisateur

merten

merten Touch 10 Manuel utilisateur

merten

merten U.motion KNX Server Plus Manuel utilisateur

Manuels Écran tactile populaires d'autres marques

FlowLine

FlowLine Data loop Manuel utilisateur

ALPEX

ALPEX AEx-8 P Series Manuel utilisateur

Ltech

Ltech E5S Manuel utilisateur

Harman

Harman AMX MODERO S MSD-701-L2 Manuel utilisateur

Acnodes

Acnodes PC 1150 Manuel utilisateur

AIS

AIS IP10IA99 series Manuel utilisateur

IBASE Technology

IBASE Technology ASTUT-152-RE1S Manuel utilisateur

YASKAWA

YASKAWA TP 610C Manuel utilisateur

B&R

B&R Power Panel C Series Manuel utilisateur

Beijer Electronics

Beijer Electronics X2 control Manuel utilisateur

AXIOMTEK

AXIOMTEK GOT321W-521 Manuel utilisateur

TRIDONIC.ATCO

TRIDONIC.ATCO x-touchBOX Manuel utilisateur

Qomo

Qomo QIT1386 Manuel utilisateur

DFI

DFI KS104-CD Manuel utilisateur

AMX

AMX AXP-PPC Mode d’emploi

Sartorius

Sartorius X3 PR 5410 Manuel utilisateur

AMX

AMX Modero X Series Manuel utilisateur

Advantech

Advantech TPC-30 Series Manuel utilisateur

merten MEG6260-0410 Manuel utilisateur

Manuels Écran tactile populaires d'autres marques