Meriam M1004 Manuel utilisateur

A trusted leader in measurement

and calibration solutions.

10920 Madison Ave.

Cleveland | Ohio | 44102 | USA

+ 1 216 281 1100

Meriam.com

(800) 817-7849

User Manual

M1004 Digital Calibrator

9R693-IR October 2018

User Manual for M1004 Digital Calibrator 2 of 29

Contents

M Digital Calibrator........................................................................................................................1

General Information...................................................................................................................................4

Notification Statements...................................................................................................4

Glossary......................................................................................................................................5

General warnings and cautions.......................................................................................................6

Preventing injury ..................................................................................................................6

Safety symbols.......................................................................................................................6

Sample label for General Purpose digital calibrators................................7

Fire or explosion hazard..................................................................................................7

For General Purpose Series .........................................................................................7

Do not exceed pressure limits....................................................................................8

Sensors.................................................................................................................................................................9

Customer calibration .............................................................................................................................11

Calibrate the M1004 by using the keypad:.....................................................11

1. User Zero............................................................................................................................11

2. Restore Factory Calibration.................................................................................13

3. User Span (Respan)...................................................................................................13

Digital Calibrator.......................................................................................................................................15

Battery.......................................................................................................................................15

Batteries...................................................................................................................................15

The display.............................................................................................................................17

Keypad: Description of the keys............................................................................18

The backlight........................................................................................................................20

Measurement units..........................................................................................................21

Auto O (Automatic shut o)...................................................................................21

What does the Zero (ø) key do?.............................................................................22

Specifications ..............................................................................................................................................23

Sensors: type and range..............................................................................................23

Temperature..........................................................................................................................23

Relative Humidity..............................................................................................................24

Vibration ..................................................................................................................................24

Ingress specifications....................................................................................................24

Altitude specifications...................................................................................................24

Keypad......................................................................................................................................24

Media Compatibility........................................................................................................24

Battery Type..........................................................................................................................24

Dimensional specifications........................................................................................25

Weight.......................................................................................................................................25

Enclosure ................................................................................................................................25

Maintenance and cleaning................................................................................................................26

Cleaning...................................................................................................................................26

Prepare the digital calibrator for storage.........................................................26

9R693-IR October 2018

User Manual for M1004 Digital Calibrator 3 of 29

Help.......................................................................................................................................................................27

Register your product....................................................................................................27

Find downloads and documents ...........................................................................27

Meriam Contact Information...........................................................................................................28

Contact us..............................................................................................................................28

Repair or Calibration.......................................................................................................29

9R693-IR October 2018

User Manual for M1004 Digital Calibrator 4 of 29

General Information

Notification Statements

Disclaimer

Every precaution has been taken in the preparation of this

manual. Nevertheless, Meriam assumes no responsibility for

errors or omissions or any damages resulting from the use of

the information contained in this publication, including, without

limitation, incidental, special, direct or consequential damages.

MERIAM MAKES NO REPRESENTATIONS OR WARRANTIES

WITH RESPECT TO THE ACCURACY OR COMPLETENESS OF

THE CONTENTS HEREOF AND SPECIFICALLY DISCLAIMS ANY

IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS

FOR ANY PARTICULAR PURPOSE. Meriam reserves the right to

revise this publication and to make changes from time to time in

the content hereof without obligation to notify any person of such

revision or changes.

In no event shall Meriam be liable for any indirect, special,

incidental, consequential, or punitive damages or for any lost

profits arising out of or relating to any services provided by

Meriam or its ailiates.

It is not possible for Meriam to identify all foreseeable uses or

misuses, therefore all persons involved in commissioning, using,

or maintaining this product must satisfy their self that each

intended application is acceptable.

This publication is proprietary to Meriam and no ownership

rights are transferred. Neither this manual, nor any of the material

contained herein, may be reproduced without the prior written

consent of Meriam.

Trademark information

Design Patent D769,141 for the digital calibrator’s LCD display.

All other trademarks are the property of their respective owners.

9R693-IR October 2018

User Manual for M1004 Digital Calibrator 5 of 29

Glossary

Words and phrases with their definitions or explanations.

Words &

phrases

Definitions or explanations

Blinking • It indicates the active edit field on an edit

screen.

• It indicates the displayed value is not actively

changing (like Hold or stopped Test).

FS • FS is the abbreviation of Full Scale.

Home • Home is the first screen that displays after

turning on the digital calibrator. It’s the screen

with measurements and units on it.

• After you press the Home key in many other

screens, the digital calibrator returns you to

Home.

Key and

button

• A key refers to hardware push-buttons on the

keypad that you can press.

• A button refers to an area in meriSuite CG that

you can tap or click to select functions.

Isolated • The word isolated refers to the sensing

element being separated from the media. It

is commonly used in the phrases Absolute

Isolated (AI) pressure and Compound Isolated

(CI) pressure.

Customer

Calibration

• Customer calibration refers to any calibration

done outside of Meriam with non-Meriam

traceability.

• Customer calibration includes: Multipoint

calibration or adjustment.

9R693-IR October 2018

User Manual for M1004 Digital Calibrator 6 of 29

General warnings and cautions

Preventing injury

Failure to follow all instructions could result in injury:

▪Read the entire manual before using the digital calibrator.

▪Understand the contents before using the digital calibrator.

▪Follow all safety warnings and instructions provided with this

product.

Safety symbols

The following table defines the safety symbols, signal words,

and corresponding safety messages used in the manual. These

symbols:

▪Identify potential hazards.

▪Warn you about hazards that could result in personal injury or

equipment damage.

Safety symbols Explaining the symbols

Read directions

before using

This is the Read directions before using

symbol. This symbol indicates that you

must read the instruction manual.

DANGER

Indicates a potentially hazardous situation

which, if not avoided, will result in death or

serious injury.

WARNING

Indicates a potentially hazardous situation

which, if not avoided, could result in death

or serious injury.

CAUTION

Indicates a potentially hazardous situation

which, if not avoided, could result in minor

or moderate injury.

NOTICE

Indicates information essential for

proper product installation, operation or

maintenance.

9R693-IR October 2018

User Manual for M1004 Digital Calibrator 7 of 29

Sample label for General Purpose digital

calibrators

All M1004 Series models are available for general-purpose use.

General Purpose (GP) versions are identified by the name plate

located on the rear of the unit under the protective rubber boot. A

sample of the General Purpose name plate is shown below:

USA

|designed|engineered|assembled

+ 1 2162811100

(800)817-7849

Meriam | 10920 Madison Avenue

Cleveland |Ohio | USA | 44102

Meriam.com

For repair or calibration |

General Purpose

Four 1.5 V alkaline AA batteries

Operating Temperature:

–10 ºC < Ta < 50 ºC

Refer to manual for use and

safety precautions.

For use only

in non-hazardous

locations.

WARNING

Fire or explosion hazard

DANGER

▪Do not use General Purpose versions in hazardous areas.

▪Do not use General Purpose versions in areas that may

contain flammable gas or vapors, combustible dusts or

ignitable fibers where an unintended spark can cause a fire or

explosion.

For General Purpose Series

CAUTION

Substitution of components may impair operation and safety.

▪Disconnect power before servicing.

▪Do not power the digital calibrator with a combination of new

and old batteries.

▪Do not power the digital calibrator with a combination of

batteries from dierent manufacturers.

9R693-IR October 2018

User Manual for M1004 Digital Calibrator 8 of 29

Do not exceed pressure limits

WARNING

▪Do not exceed the Pressure Limits listed in the Specifications

section of this manual.

▪Failure to operate within the specified pressure limit could

result in minor or moderate injury.

9R693-IR October 2018

User Manual for M1004 Digital Calibrator 9 of 29

Sensors

Use two wrenches to install or remove pressure

connections

Connection: 1/8” female NPT, 316L SS.

▪Always use a 3/4 in. wrench on the pressure manifold when

you install or remove the 1/8 in. NPT fitting.

▪Applying torque to the manifold can damage the plastic

enclosure and voids the warranty.

▪Do not over tighten.

Carefully equalize the pressure

Avoid these two issues with dierential sensors:

1. Connecting pressure to the incorrect pressure port on DN or

DI dierential pressure modules may cause damage to the

pressure sensor.

2. Applying pressure to either port before both connections are

made.

NOTICE

Apply pressure to both dierential ports at the same time.

Note: See Overrange limit in the section called Specifications

concerning overrange pressure limits. If over pressure damage

occurs, you must return the digital calibrator to the factory for

sensor replacement.

9R693-IR October 2018

User Manual for M1004 Digital Calibrator 10 of 29

Sensor manifold types

ZM1004-CNXXXX

ZM1004-DNXXXX

ZM1004-ANXXXX

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Meriam Équipement de test

Meriam

Meriam PIT5000 Manuel utilisateur

Meriam

Meriam M1000 Manuel utilisateur

Meriam

Meriam M203 Manuel utilisateur

Meriam

Meriam M4 Series Manuel d'utilisation

Meriam

Meriam M130 Manuel utilisateur

Meriam

Meriam MFT 4000 Manuel utilisateur

Manuels Équipement de test populaires d'autres marques

SMART

SMART KANAAD SBT XTREME 3G Series Manuel utilisateur

Agilent Technologies

Agilent Technologies BERT Serial Manuel utilisateur

Agilent Technologies

Agilent Technologies N3280A Manuel utilisateur

Vernier

Vernier Go Direct Voltage Manuel utilisateur

Lifeloc

Lifeloc R.A.D.A.R. Manuel utilisateur

Fluke

Fluke T5-600 Instructions d'utilisation et d'installation

Mercury

Mercury TSL01 Manuel utilisateur

MAHA

MAHA MBT Series Manuel utilisateur

Fuji Electric

Fuji Electric P-61 Manuel utilisateur

ETC

ETC SealerAtor Manuel utilisateur

Skyfine

Skyfine ETHYWAY V2 Manuel utilisateur

Appion

Appion G5 Twin Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 8159-0112A Manuel utilisateur

BW Technologies

BW Technologies MicroDock II Manuel utilisateur

Sun Nuclear

Sun Nuclear 1027 Manuel utilisateur

Biomark

Biomark HPR LITE READER Manuel utilisateur

Hioki

Hioki 3169-20 Manuel utilisateur

Ashcroft

Ashcroft ATE-100 Manuel utilisateur