Memorex MD6460 Manuel utilisateur

Before operating this product,

please read these instructions completely.

User’s Guide

PERSONAL COMPACT DISC PLAYER

WITH 60 SECOND DIGITAL MOTION

PROOF ANTI-SHOCK PROTECTION

MD6460

SAFETY PRECAUTIONS

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS

INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

DANGEROUS VOLTAGE:

The lightning ﬂash with arrowhead symbol, within an equilateral

triangle is intended to alert the user to the presence of uninsulated

dangerous voltage within the product’s enclosure that may be of

sufficient magnitude to constitute a risk of electric shock to persons.

ATTENTION:

The exclamation point within an equilateral triangle is intended to

alert the user to the presence of important operating and

maintenance (servicing) instructions in the literature accompanying

the appliance.

DANGER:

This product utilizes a Class 1 laser to read Compact Discs.

This laser Compact Disc Player is equipped with safety

switches to avoid exposure when the CD door is open and the

safety interlocks are defeated. Invisible and hazardous laser

radiation when open and interlock failed or defeated. Avoid

direct exposure to beam. Please do not attempt to defeat or

bypass the safety switches.

FCC WARNING:

This equipment may generate or use radio frequency energy. Changes

or modiﬁcations to this equipment may cause harmful interference

unless the modiﬁcations are expressly approved in the instruction man-

ual. The user could lose the authority to operate this equipment if an

unauthorized change or modiﬁcation is made.

SURGE PROTECTORS:

It is recommended to use a surge protector for AC connection.

Lightning and power surges ARE NOT covered under warranty for this

product.

INFORMATION:

This equipment has been tested and found to comply with the limits for a Class

Bdigital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a res-

idential installation. This equipment generates, uses and can radiate radio fre-

quency energy and, if not installed and used in accordance with the instruc-

tions, may cause harmful interference to radio communications. However, there

is no guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

• Do not open the CD compartment while the CD is rotating.

• Always keep the CD compartment closed when not in use.

• Keep all foreign objects out of the CD compartment.

• Place the unit on a stable surface.

• Avoid installing the unit in locations described below:

• Places exposed to direct sunlight or close to heat radiating

appliances such as electric heaters.

• On top of other stereo equipment that radiates too much

heat.

• Places lacking ventilation or dusty places.

• Places subject to constant vibration.

• Humid or moist places.

ATTENTION:

POUR ÉVITER LES CHOC ÉLECTRIQUES, INTRODUIRE LA LAME LA

PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE

LA PRISES ET POUSSER JUSQU’AU FOND.

SAFETY PRECAUTIONS (CONTINUED)

Dear Customer:

Selecting fine audio equipment such as the unit you’ve just purchased is only the start of

your musical enjoyment. Now it’s time to consider how you can maximize the fun and

excitement your equipment offers. This manufacturer and the Electronic Industries

Association’s Consumer Electronics Group want you to get the most out of your equipment

by playing it at a safe level. One that lets the sound come through loud and clear without

annoying blaring or distortion and, most importantly, without affecting your sensitive

hearing.

Sound can be deceiving. Over time your hearing “comfort level” adapts to higher volumes of

sound. So what sounds “normal” can actually be loud and harmful to your hearing. Guard

against this by setting your equipment at a safe level BEFORE your hearing adapts.

To establish a safe level:

• Start your volume control at a low setting.

• Slowly increase the sound until you can hear it comfortably and clearly, and without

distortion.

Once you have established a comfortable sound level:

• Set the dial and leave it there.

Taking a minute to do this now will help to prevent hearing damage or loss in the future.

After all, we want you listening for a lifetime.

We Want You Listening For A Lifetime

Used wisely, your new sound equipment will provide a lifetime of fun and enjoyment. Since

hearing damage from loud noise is often undetectable until it is too late, this manufacturer

and the Electronic Industries Association’s Consumer Electronics Group recommend you

avoid prolonged exposure to excessive noise. This list of sound levels is included for your

protection.

Decibel

Level Example

30 Quiet library, soft whispers

40 Living room, refrigerator, bedroom away from traffic

50 Light traffic, normal conversation, quiet office

60 Air conditioner at 20 feet, sewing machine

70 Vacuum cleaner, hair dryer, noisy restaurant

80 Average city traffic, garbage disposals, alarm clock at two feet

THE FOLLOWING NOISES CAN BE DANGEROUS UNDER CONSTANT

EXPOSURE:

90 Subway, motorcycle, truck traffic, lawn mower

100 Garbage truck, chain saw, pneumatic drill

120 Rock band concert in front of speakers, thunderclap

140 Gunshot blast, jet engine

180 Rocket launching pad

Information courtesy of the Deafness Research Foundation.

EST. 1924

EIA

LISTENING

For A Lifetime

Want You

LOCATION OF CONTROLS

9 13 14 15 167 17121110

1 3 4 5 6

1. DC 4.5V Jack

z(Rear of Unit)

2. ESP Button

3. Display

4. PROG (Program) Button

5. PLAY/PAUSE (®p)/POWER

ON Button

6. HOLD (ON/OFF) Switch

7. Battery Compartment

(Under CD Compartment)

8. MODE Button

9. CD Door OPEN Switch

10. CD Compartment

11. Skip/Search oButton

12. STOP (■)/POWER OFF

Button

13. Skip/Search nButton

14. DBBS (Bass Boost) Switch

15. VOLUME Control

16. Headphones Jack

(Side of Unit)

17. LINE OUT Jack (Side of Unit)

This CD player requires either two (2) “AA” cell batteries (not included) or

an AC adapter (not included).

BATTERY INSTALLATION

The battery indicator ( ) will blink or appear in the CD display when the

batteries need replacing.

1. Open the CD compartment, then open the

battery compartment door by pressing in on

the tab and then lifting it. To prevent the

possibility of losing the cover, it cannot

be removed.

2. Insert two (2) “AA” cell batteries (not

included) according to the polarity diagram

inside the battery compartment. Alkaline

batteries are recommended for the longest

playing time.

AC OPERATION

To operate the unit using AC power, connect an AC adapter (not included) to

an AC outlet having 120V, 60Hz AC only. Plug the small end into the DC

4.5V jack on the unit and connect the other end into the AC outlet. The

batteries are automatically disconnected when the AC adapter is used.

CAUTION:When not using AC power, disconnect the AC adapter from

the wall outlet by pulling the plug (not the cord). Do not touch the AC

adapter with wet hands. Fully insert the plug without exposing any part of

the blade.

DC4.5V z

POWER SOURCES

BATTERY PRECAUTIONS

Follow these precautions when using batteries in this device:

1. Use only the size and type of batteries speciﬁed.

2. Be sure to follow the correct polarity when installing the batteries as indicated next to the battery

compartment. Reversed batteries may cause damage to the device.

3. Do not mix different types of batteries together (e.g. Alkaline, Carbon-zinc or Rechargeable) or old

batteries with fresh ones.

4. If the device is not to be used for a long period of time, remove the batteries to prevent damage or

injury from possible battery leakage.

5. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture.

(Follow battery manufacturer’s directions.)

–

OPERATION

To emphasize the bass, slide the

DBBS switch to the ON position. For

normal bass, slide the DBBS switch to

the OFF position.

To turn the unit on, press the

PLAY/PAUSE (®p)/POWER ON button

❶.

To turn the unit off, Press the STOP

(■)/POWER OFF button ❷while in the

Stop mode.

BASS BOOST TURNING POWER ON/OFF

AUTO POWER OFF

When the unit is stopped (Standby mode) for approximately one minute, the

power will automatically turn off.

Radio Sound Through a Home Audio System

By using a home audio connection cable (not included), superb radio sound can

be heard through your home audio system. Before making any connections, turn

off the power to all equipment.

Plug a connection cable (not included) between the LINE OUT jack on the side

of the CD player and the ampliﬁer’s AUX or CD input jack. (Do not connect it to

the ampliﬁer’s PHONO jack.)

NOTE: If the radio interferes with TV reception, move the unit away from the TV

or turn off the power to this unit.

Slide to the ON position to disable the buttons; “Hold” will briefly appear in the

display. When pressing the buttons on the CD compartment lid, "Hold" will briefly

appear in the display. Slide to the OFF position to enable the buttons. For the HOLD

function, only the buttons on the CD compartment lid will be disabled, not the other

controls/switches.

HOLD

CD OPERATION

Open the CD compartment lid by

sliding the CD OPEN switch to the

right. Gently press a disc, label side up,

onto the spindle until it locks in place.

Close the CD compartment lid. Insert

headphones into the PHONES jack.

Press the PLAY/PAUSE (®p)/POWER

ON button to start playback. To pause

playback,press the PLAY/PAUSE

(®p)/POWER ON button again, the

elapsed time will blink. Press once

again to resume playback.

TO PLAY A CD (Standard, CD-R and CD-RW)

Adjust the VOLUME control ❶and

DBBS switch ❷as desired. To skip

forward or backward through the tracks

on the disc, press the SKIP/SEARCH

o3or n 4 button.To search forward

or backward through the tracks on the

disc, press and hold the SKIP/SEARCH

o3or n4button.

When the disc is through playing, it will

stop. Press the STOP (■)/POWER OFF

button to stop the disc before it is

ﬁnished; the total number of tracks will

appear. Press the STOP (■)/POWER

OFF button again while in the Stop mode

to turn the unit off or wait approximately

60 seconds and the unit will automatically

turn off.

NOTES:

• This unit is capable of playing standard CDs or 3” singles; no adapter is required.

•If a disc is inserted incorrectly, dirty, damaged or not present at all, the display will

show “no disc”.

•As each track is played, the track number and elapsed time are shown in the display.

• To remove the disc, open the CD compartment, hold the edge of the CD, gently

press the center pivot and lift the CD.

•The maximum play time for a CD in this unit is 74 minutes.

•“- - - -” will appear in the display when the CD door is open.

CD OPERATION (CONTINUED)

60 SECOND MOTION PROOF ELECTRONIC ANTI-SHOCK SYSTEM

This CD player has a built-in Anti-Shock System that cuts down on CD skipping,

which is useful when using the CD player in the car or while jogging/walking.

Follow the steps below to activate and understand the Anti-Shock System:

Open the CD compartment lid by

sliding the CD OPEN switch to the

right. Gently press a disc, label side

up, onto the spindle until it locks in

place. Close the CD compartment lid.

Insert headphones into the PHONES

jack.

With a CD inserted, press the

PLAY/PAUSE (®p)/POWER ON

button to turn the unit on.

The Anti-Shock System will start

automatically, the sound will mute for a

moment and the display will show the

Anti-Shock indicator with no bars in it.

Within a few seconds, the Anti-Shock

indicator will fill to indicate music

signals are stored in memory.

CONTINUED ON THE NEXT PAGE

CD OPERATION (CONTINUED)

If the CD player is subject to vibration

during playback, the bars will

disappear one by one. During the

vibration, the music should continue to

play the signals stored in the memory

until the CD player can read the music

data properly from the disc. At this

time, the indicator will probably show

fewer bars indicating the music signals

stored in memory are low.

If all the bars disappear and the CD

player is subject to immediate vibration,

the unit may skip.

If no more vibration occurs, the

music signals are once again stored

into the memory and the indicator

returns to full. When the memory is

full, the top bar will blink and the

disc rotation speed will drop to save

power consumption.

To turn the Anti-Shock System off,

press the ESP button.

To turn the Anti-Shock System on,

press the ESP button again.

NOTES:

•When the CD player is used in a stable location, turn the Anti-Shock System

off by pressing the ESP button. When the Anti-Shock System is off, battery

consumption is less.

•The Anti-Shock System provides for continuous sound output when the unit

is subject to vibration, but it will not correct errors, such as a defective or

dirty CD.

Autres manuels pour MD6460

Table des matières

Langues :

Autres manuels Memorex Lecteur MP3

Memorex

Memorex MMP8620 Manuel utilisateur

Memorex

Memorex MMP8570 - 512 MB Digital Player Manuel utilisateur

Memorex

Memorex Disney DDA8040-TNK Manuel utilisateur

Memorex

Memorex MD6888 Manuel utilisateur

Memorex

Memorex MPD8507CP Manuel utilisateur

Memorex

Memorex MMP8565 Manuel utilisateur

Memorex

Memorex MPD8861PLL Manuel utilisateur

Memorex

Memorex MMP8568-HIT Manuel utilisateur

Memorex

Memorex MMP8002 Series Manuel utilisateur

Memorex

Memorex NMP4101-SBS - Npower Fission SpongeBob 1 GB Digital... Manuel utilisateur

Memorex

Memorex Touch MP Manuel utilisateur

Memorex

Memorex MMP3774 Manuel utilisateur

Memorex

Memorex MMP3731 Manuel utilisateur

Memorex

Memorex MMP8585C - 4 GB Digital Player Guide de démarrage rapide

Memorex

Memorex MHD8021 - 2 GB Digital Player Manuel utilisateur

Memorex

Memorex MPD8860 - CD / MP3 Player Manuel utilisateur

Memorex

Memorex MPD8859 Manuel utilisateur

Memorex

Memorex MMP8585 Manuel utilisateur

Memorex

Memorex MMP8564 - 512 MB Digital Player Manuel utilisateur

Memorex

Memorex MMP8500 - Biomorph 128 MB Digital Player Manuel utilisateur

Memorex

Memorex MMP3731 Manuel utilisateur

Memorex

Memorex MMP8001 Series Guide de démarrage rapide

Memorex

Memorex MHD8015 Manuel utilisateur

Memorex

Memorex TouchMP Manuel utilisateur

Manuels Lecteur MP3 populaires d'autres marques

Blaupunkt

Blaupunkt Compact Drive MP3 Manuel utilisateur

Meizu Electronic Technology

Meizu Electronic Technology E5 Manuel utilisateur

Naxa

Naxa NMV-173NX Manuel utilisateur

Philips

Philips PSA250 Manuel utilisateur

Zipy

Zipy go! Waving Manuel utilisateur

Sylvania

Sylvania SMPK4068 Manuel utilisateur

Sony

Sony NW-MS7 - Memory Stick Walkman Manuel utilisateur

Irradio

Irradio RF-42UC Manuel utilisateur

NABAIJI

NABAIJI SWIM MUSIC 100 Manuel utilisateur

Laser

Laser MP3-A9-4GB Manuel utilisateur

Samsung

Samsung YP-T7F Manuel utilisateur

Savant

Savant SMS-1001-00 Guide de référence rapide

Trevi

Trevi XP 71 BT Manuel utilisateur

AGPtek

AGPtek C2 Manuel utilisateur

MobiBlu

MobiBlu DAH-1500i Manuel utilisateur

Denver

Denver MPS-201 Manuel utilisateur

Steren

Steren MP3-002 Manuel utilisateur

Kenwood

Kenwood M1GD50 Manuel utilisateur