Mellanox Technologies MIS5022Q-1BFR Manuel utilisateur

Document no. 3408

Mellanox Technologies Confidential

http://www.mellanox.com

Dismantling Guide

OPNs MIS5022Q-1BFR, MIS5022Q-1BRR

Rev. 1.0

Dismantling Guide

Rev. 1.0

Mellanox Technologies Confidential

2 of 13

NOTE:

THIS INFORMATION IS PROVIDED BY MELLANOX FOR INFORMATIONAL PURPOSES ONLY

AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE

IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE

ARE DISCLAIMED. IN NO EVENT SHALL MELLANOX BE LIABLE FOR ANY DIRECT,

INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES

(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;

LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND

ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT

(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF

THIS HARDWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Mellanox Technologies, Inc.

350 Oakmead Parkway Suite 100

Sunnyvale, CA 94085

U.S.A.

www.mellanox.com

Tel: (408) 970-3400

Fax: (408) 970-3403

Mellanox Technologies Ltd

PO Box 586 Hermon Building

Yokneam 20692

Israel

Tel: +972-4-909-7200

Fax: +972-4-959-3245

Mellanox®, BridgeX®, ConnectX®, InfiniBlast®, InfiniBridge®, InfiniHost®, InfiniRISC®,

InfiniScale®, InfiniPCI®, PhyX® and Virtual Protocol Interconnect® are registered trademarks of

Mellanox Technologies, Ltd. CORE-Direct and FabricIT are trademarks of Mellanox Technologies, Ltd.

All other marks and names mentioned herein may be trademarks of their respective companies.

Contact Information

Should you have any questions regarding our Products, please feel free to contact us directly or contact our

local distributors.

Mellanox Technologies Call Center

Tel: +

Email: Mellanox_WEEE@mellanox.com

Dismantling Guide

Rev. 1.0

Mellanox Technologies Confidential

3 of 13

Table of Contents

Revision .......................................................................................................................................... 4

Preface............................................................................................................................................. 4

Switch OPNs................................................................................................................................... 4

Policy Statement ............................................................................................................................. 5

1Dismantling Instructions......................................................................................................... 6

1.1 InfiniBand Switch Systems - General............................................................................. 6

1.2 General Preparations....................................................................................................... 6

1.3 Cover............................................................................................................................... 7

1.4 Extracting the Power Supply Unit .................................................................................. 8

1.5 Extracting the Fan Unit................................................................................................. 10

1.6 Extracting the Board ..................................................................................................... 12

List of Tables

Table 1: Revision History ......................................................................................................... 4

Table 2: Switch OPNs for this Procedure................................................................................. 4

Table of Figures

Figure 1 Remove the Cover....................................................................................................... 7

Figure 2 PSU Location.............................................................................................................. 8

Figure 3 Harness Location for PSU .......................................................................................... 8

Figure 4 Remove the Power Supply Unit from the Switch....................................................... 9

Figure 5 Fan Location ............................................................................................................. 10

Figure 6 Fan Harness Locations.............................................................................................. 10

Figure 7 Remove Fan Module................................................................................................. 11

Figure 8 Board Screw Locations............................................................................................. 12

Figure 9 Remove Heat Sink .................................................................................................... 13

Dismantling Guide

Rev. 1.0

Mellanox Technologies Confidential

4 of 13

Revision

Table 1: Revision History

Revision

Date

1.0

January 2011

Preface

This manual is intended as a reference for dismantling MIS 5022 switch systems

in preparation of meeting the requirements of WEEE recycling. Intended

Audience

This manual is intended for technicians who dismantle the switch systems as a

reference for WEEE recyclers.

Mellanox Technologies emphasizes the importance of carefully following all

procedures described in this guide to prevent personal injury.

Switch OPNs

This document is valid for all of the switch OPNs listed in Table 2.

Table 2: Switch OPNs for this Procedure

MIS5022Q-1BFR

MIS5022Q-1BRR

Dismantling Guide

Rev. 1.0

Mellanox Technologies Confidential

5 of 13

Policy Statement

Mellanox Technologies recognizes the importance of developing connectivity

solutions that not only enable our customers to optimize their data centers

performance, but also protect the environment and ensure that future generations

enjoy its bounties. Mellanox Technologies is committed, therefore, to meeting the

requirements of the European Union’s WEEE (waste electrical and electronic

equipment) directive. The directive mandates how the materials used in electrical

and electronic equipment must be disposed of.

Mellanox Technologies has worked closely with its suppliers to eliminate

hazardous materials from its Products. There are instances, however, where it has

not proven possible to completely eliminate all hazardous materials.

Consequently, all applicable products are labeled with a crossed out “wheelie” bin

symbol, indicating that special care must be applied to their disposal and / or

recycling.

Dismantling Guide

Rev. 1.0

Mellanox Technologies Confidential

6 of 13

1Dismantling Instructions

This guide provides detailed instructions for dismantling the Mellanox InfiniBand

switch systems. Follow the instructions in the order they are presented.

1.1 InfiniBand Switch Systems - General

The InfiniBand switch system complies with the RoHS directive under the

exemption known as RoHS-6.

The last digit of the product part number represents the RoHS type.

For example

MIS5022Q-1BRR—the last R = RoHS-6

InfiniBand switch system systems are comprised of:

Cover

Power Supply Unit (PSU)

Harnesses

Fan unit

Main Board

1.2 General Preparations

The InfiniBand switch system is assembled using Philips screws, and handles

with snap in latches for modules.

To disassemble the InfiniBand switch system you will need a small Philips

screwdriver.

The pictures displayed in the following pages provide visual guidance explaining

how to remove the modules from the mechanical base.

Dismantling Guide

Rev. 1.0

Mellanox Technologies Confidential

7 of 13

1.3 Cover

1. Unscrew the rear-side screws, and slide the cover to the back for opening it.

2. Slide the top to the rear and lift off.

Figure 1 Remove the Cover

Dismantling Guide

Rev. 1.0

Mellanox Technologies Confidential

8 of 13

1.4 Extracting the Power Supply Unit

The power Supply unit is located on the side of the switch unit next to the main

board.

Figure 2 PSU Location

1. Disconnect the 3 harness connectors from the main board, the inlet and the ground.

Figure 3 Harness Location for PSU

2. Disassemble the 4 screws & washers attaching the power supply to the mechanical

base.

Dismantling Guide

Rev. 1.0

Mellanox Technologies Confidential

9 of 13

Figure 4 Remove the Power Supply Unit from the Switch

Dismantling Guide

Rev. 1.0

Mellanox Technologies Confidential

10 of 13

1.5 Extracting the Fan Unit

The Fan unit is located in the rear of the system.

Figure 5 Fan Location

1. Disconnect the 3 harnesses from the fan unit to the board.

Figure 6 Fan Harness Locations

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Mellanox Technologies Changer

Mellanox Technologies

Mellanox Technologies Spectrum SN2740 Instructions d'utilisation

Mellanox Technologies

Mellanox Technologies MTS3600 Manuel utilisateur

Mellanox Technologies

Mellanox Technologies Grid Director 4036E Manuel utilisateur

Mellanox Technologies

Mellanox Technologies MSX6512-NR Manuel

Mellanox Technologies

Mellanox Technologies SB7700 Manuel utilisateur

Mellanox Technologies

Mellanox Technologies MIS5600Q-10DNC Manuel utilisateur

Mellanox Technologies

Mellanox Technologies SX6720 Instructions d'utilisation

Mellanox Technologies

Mellanox Technologies MIS5035Q-2SFC Manuel utilisateur

Mellanox Technologies

Mellanox Technologies SX1710 Manuel utilisateur

Mellanox Technologies

Mellanox Technologies MSX6536-10R Manuel

Mellanox Technologies

Mellanox Technologies Spectrum SN2100 Manuel utilisateur

Mellanox Technologies

Mellanox Technologies Mellanox SX1018 Mode d’emploi

Mellanox Technologies

Mellanox Technologies SX6710 Instructions d'utilisation

Mellanox Technologies

Mellanox Technologies TX6100 MetroX Series Instructions d'utilisation

Mellanox Technologies

Mellanox Technologies SwitchX Manuel utilisateur

Mellanox Technologies

Mellanox Technologies MSX6536-10R Manuel

Mellanox Technologies

Mellanox Technologies SX1710 Manuel utilisateur

Mellanox Technologies

Mellanox Technologies InfiniScale III Manuel utilisateur

Mellanox Technologies

Mellanox Technologies Spectrum SN2700 Manuel utilisateur

Mellanox Technologies

Mellanox Technologies Switch-IB Manuel utilisateur

Mellanox Technologies

Mellanox Technologies SX6518-NR Manuel

Mellanox Technologies

Mellanox Technologies IS5025D-1BRC Manuel utilisateur

Mellanox Technologies

Mellanox Technologies SX10XX Instructions d'utilisation

Mellanox Technologies

Mellanox Technologies Mellanox SX1018 Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur