1. Introduction
1.1 Welcome to the ever-increasing family of satised MEGATANK users. All MEGATANK products like the one you have
just purchased, undergo a stringent quality check. This instrument provides clean and reliable power to your Load
and peripherals and protects them from blackouts. The product is designed to provide you an ecient performance
with only minimal care and maintenance at your end. This manual will facilitate you to not only understand the basic
working of the ESS but will also facilitate the ease of its maintenance and use.
1.2 MEGATANK all in one ESS provides power to fans, bulbs, computers etc.
1.3 System diagram is as below:
2. Safety Guidelines
Please go through these guidelines before connecting the product.
2.1 Always connect the ESS to a two-pole, three-wire grounding Mains socket. The socket must be connected to
appropriately protected branch of the Mains (fuse/circuit breaker). Connection to any other type of socket may result
in a shockhazard.
2.2 To Switch o the ESS output in an emergency, use the touch switch on graphic display to switch the ESS o. Turn the
battery switch OFF on the back to disconnect the battery module.
2.3 Avoid Installing the ESS in an excessively humid place or where there is water. Care must be taken to ensure that
the ESS is kept away from heat emitting appliances such as a heater, blower, oven etc. The unit must also be placed
in a manner that it avoids exposure to direct sunlight. The place of installation should be well-ventilated and easily
accessible for servicing.
2.4 Foreign particles and water must not enter the ESS. Always ensure that no objects containing a liquid are ever kept
near the unit.
2.5 Don't allow any spark near battery modules.
2.6 Always switch o the product, disconnect mains & turn o AC/DC MCB while inserting or replacing the battery
modules.
2.7 Do not open the product, there are dangerous high voltages inside even when power is o, contact the company if it
is not working properly.
03
