
● Press the POWER
POWER
POWER
POWER button on the IR Thermometer. All the icons will appear briefly as shown in
Figure 5.2C.
● You will see the last thermometer reading when the image shown in Figure 5.3 C is displayed.
● When house symbol is displayed on the screen as shown in Figure 5.4C; and at the same
time, the ℃symbol blinks, the ambient Temperature can now be measured. A voice will ask you to
start the measurement.
● To measure the ambient temperature, point the PROBE
PROBE
PROBE
PROBE part of the Thermometer into the air and
press the SCAN
SCAN
SCAN
SCAN button. The measurement will be finished in 1 second when you hear the beep. The
reading will appear on the display as shown in Figure 5.5C. The voice will announce the ambient
temperature.
● You can take a new reading once the ℃symbol begins blinking. The voice will ask you to measure
again.
● The power will shut off within 60 seconds, if you do not switch it off by pressing the POWER button.
How
How
How
How to
to
to
to switch
switch
switch
switch processor
processor
processor
processor announcement
announcement
announcement
announcement language
language
language
language
When the IR Thermometer is powered off, press the SCAN
SCAN
SCAN
SCAN button for 10 seconds until any number
from 01
01
01
01 through 06
06
06
06 displays on the screen and release the button. Press the SCAN
SCAN
SCAN
SCAN button and
release immediately to switch languages . Language code as below for ref.:
Code
Code
Code
Code 01 02 03 04 05 06
Language
Language
Language
Language English Spanish French Russian Italian German
How
How
How
How to
to
to
to access
access
access
access the
the
the
the 12
12
12
12 memory
memory
memory
memory recall.
recall.
recall.
recall.
When the IR Thermometer is powered off, press and release the SCAN
SCAN
SCAN
SCAN button. You will see 3 dashes
and a flashing M
M
M
M. To view the most recent stored result, press and release the SCAN
SCAN
SCAN
SCAN button. The
number 1
1
1
1will display briefly, followed by the most recent result. Pressing SCAN
SCAN
SCAN
SCAN again shows 2
2
2
2briefly,
then the 2
nd
most recent stored result. Continue pressing the SCAN
SCAN
SCAN
SCAN button to scroll through the rest of
the stored results.
How
How
How
How to
to
to
to delete
delete
delete
delete the
the
the
the entire
entire
entire
entire memory.
memory.
memory.
memory.
When the IR Thermometer is powered off, press the SCAN
SCAN
SCAN
SCAN button and release immediately. Press the
SCAN
SCAN
SCAN
SCAN button again to display the latest reading entered into the memory bank. Press the POWER
POWER
POWER
POWER
button for 3 seconds until the LCD display “ --- ” and release the button, then all 12 memory entries are
deleted completely.