MediaSonic HFR7-SU31CD Manuel utilisateur
RAID Hard Drive Enclosure
For 3.5'' SATA HDD
USB 3.1 Gen-II / Type-C / PD
2x
RAID
0
/
1
2x USB-A
/
USB-C
/
4K
HDMI
/
SDXC
/
Micro
SDXC
With Smart Dock
USER’S MANUAL
Official website
www.mediasonicusa.com http://forum.mediasonic.ca/
Online forum
HFR7-SU31CD
/ Rev.01
CONTENTS
Quick Installation Guide
SELF-ASSEMBLY 6-8
RAID mode setup / Rebuild settings / RAID Mode Description / LED display status
SETUP 9-15
OVERVIEW 2-5
Front Panel / Rear Panel / Interior Accessories
1
TROUBLESHOOTING 22-23
INITIALIZATION 16-21
Windows 10 / Mac OS X 10.14 or later
PRODUCT FEATURE
PRODUCT FEATURE
DESCRIPTION
PD
T Y PE C
U S B 3 .1
2x RAID 0/1
Function
POWER SYNC
Power synchronized
with connected PC
2x RAID 0/1 Function
Supports 2 sets
of different RAID
USB HUB
(Front Panel) USB 3.0 type A
(Rear Panel)
USB 3.0 type A
USB 3.1 type C
Card Reader
Micro SDXC(UHS-II)
SDXC(UHS-II)
Connect to the Multiple Device
with using USB-A/C port.
Support Multiple Device
Maximum HDD x4
Supports 4 HDD
for 3.5” drives
Support 60W Power Delivery 3.0
power charging for mode
USB-C PD at MAX 60W 4K HDMI Extender
Expand workspace
to second monitor
HIGH SPEED
DC/IN
USB3.1
01
OVERVIEW
12
12 4
5 6 7
3
8
9
13
15
11
10
14
DIAGRAM of HFR7-SU31CD
Front Panel
02
Single mode don't display
HDD error light
SET 1 RAID button Select SET 1 RAID mode.
2
SET 2 RAID button Select SET 2 RAID mode.
3
Power button
1On
Off
Press the button
Press the button and hold it still
SD slot Support SDXC UHS-II
6
Micro SD slot Support Micro SDXC UHS-II
5
7USB 3.0 type A port
Smart Fan Status Blue
Off
The fan is adjust the wind speed according to the temperature.
The fan is running at low speed.
9
8Power light Blue
Orange
Off
Power on
When the PC is off, the device goes to sleep mode.
Power off
14 HDD 1 ~ HDD 4 Status
Blue
Purple flash
Purple breathing LED
Active
Active
Is under rebuilding (in RAID 1)
SET 1 HDD error light
When RAID information, the device is not HDD inserted,
format error or reconstruction, red light is always on.
12
SET 2 HDD error light
When RAID information, the device is not HDD inserted,
format error or reconstruction, red light is always on.
13
Hatch door
15
DESCRIPTION
Red
Red Flash
Is under rebuilding (in RAID 1)
When the devies is no hard disk
and format error, LED will flash
16 HDD 1~HDD 4 Error / Rebuilding light
Smart Fan button
4On/off setup
SET 1 RAID mode light Orange Active
10
Single (Simulation of single mode)
JBOD Spanning (
Spanning Mode/BIG
)
RAID 0 (Striping Mode)
RAID 1 (Mirroring)
Green Active
SET 2 RAID mode light
Single (Simulation of single mode)
JBOD Spanning (
Spanning Mode/BIG
)
RAID 0 (Striping Mode)
RAID 1 (Mirroring)
11
16
•This device is built in 2 sets of RAID.
•This design will prevent accidental
execution of this function.
Micro SD slot
Gold contacts facing up
Default setting is at
Single & Automatic
mode
03
1
2
5
3
4
6
8
9
7
DESCRIPTION
USB 3.0 type A port
1FAN cover
6
USB 3.1 type C port
27AC Input port
RAID mode confirmation button
38Security lock
HDMI V2.0 out port (4K / 30Hz)
4AC power switch
9
You must first turn on the power switch.
Then turn on the power switch on the
front panel.
USB 3.1 type C port (For PC)
5
Output charging
support Power Delivery 3.0
DIAGRAM of HFR7-SU31CD
Rear Panel
04
Interior Accessories
Metal Frame
1
HDD Handle
2
05
SELF-ASSEMBLY
Quick Installation Guide
1. Please use the provided handles
to secure the 4 HDDs with screws.
2. Open the cover.
3.
Press down the 2 tabs to detach the metal frame and remove it.
06
Table des matières
Autres manuels MediaSonic Enceinte
MediaSonic
MediaSonic HFR7-SU31CH Manuel utilisateur
MediaSonic
MediaSonic HUR5-SU31C Manuel utilisateur
MediaSonic
MediaSonic HF2-SU2S2 ProBox Manuel utilisateur
MediaSonic
MediaSonic H82-SU31C Manuel utilisateur
MediaSonic
MediaSonic HFR7-SU31CH Manuel utilisateur
MediaSonic
MediaSonic HUR1-SU3S2 Manuel utilisateur
MediaSonic
MediaSonic HF7-SU31C Manuel utilisateur
