Meanwell KAA-8R Series Manuel utilisateur

KAA-8R

Universal Actuator

Instruction manual

Content

Version 0

1.Overview

2.Communication Objects

3.Reference ETS-Parameter – Switch for different application

1.1 Overview devices

2.1 Global communication objects

2.2 Default settings of the central communication objects

2.3 Default settings of the communication objects for each functions

3.1 General setting

3.2 Channel selection

3.3 Identical parameter

3.4 Switching output

3.5 Staircase

3.6 Switch impulse

3.7 Heating Control with PWM

1.2 Usage & possible applications

1.3 Exemplary Circuit diagrams

1.3.1 Switching actuator

1.5.1 Overview at general setting and functions

1.3.2 Mixed mode

3.3.1 Relay operating mode

3.3.2 Central function

3.3.3 Behavior at locking /unlocking

3.3.4 Behavior at bus power up/down

3.4.1 Overview

3.4.2 On/Off delay

3.4.3 Logic function

3.4.4 Scene function

3.4.5 Threshold switch

3.4.6 Operation hours counter function

3.5.1 Overview

3.5.2 Staircase time

3.5.3 Scenes (Staircase Light)

1.5.2 Overview functions at the switch/staircase mode/switch impulse/heating

1.4 Structure & Handling

1.5 Functions

1.6 Settings at the ETS-Software

1.7 Starting up

...............................................................................................................

.......................................................................................

...............................

..................................................................................................

................................................................................

.....................................................................................

.............................................................................................

..........................................................................

.................................................

..................................

.....................................................................................................

.................................................................................................

...............................................................................................

.........................................................................

......................................................................................................

...................................................................................................

..................................................................................................

...............................................................................................

............................................................................................

.....................................................................

.............................................................................................................

......................................................................................................

...............................................................................................

..................................................................................

.....................................................................................................

.......................................................................................

.................................................................................

....................................................................................

.........................................................................................

...........................................................

..................................................................................................

.................

.............................................................................................

............................................................................................................

...................................................................................

...........................................................................................................

KAA-8R Universal Actuator Instruction manual

1.Overview

1.1 Overview devices

The manual refers to the following devices: (Order Code respectively printed in bold type):

KAA-8R-10 Universal Actuator 8-fold, 230V AC, 10A.

◎4 Channels for shutter motors up to 600W, Manual control or 8 Channels for switching outputs for ohmic loads up to 2300W.

◎Any supposable mixed form of switching outputs and shutter output possible.

KAA-8R Universal Actuator 8-fold, 230V AC, 16A.

◎4 Channels for shutter motors up to 600W, Manual control or 8 Channels for switching outputs for ohmic loads up to 3680W.

◎Any supposable mixed form of switching outputs and shutter output possible.

1.2 Usage & possible applications

The universal actuator has its field of applications always if you ask flexibility. It can be parameterized as well as an adequate

switching actuator.

Further, there is the possibility of embedding the channel into automatic blocks and activate different scenes. At activation of the

automatic function, absolute position can be approached via 1 Bit object. This function is e.g. very suitable for the start-up of

sunblind positions, which are called via a brightness sensor. Additional weather alarms are parameterize able, which can call

determined functions at the universal actuator.

Additional a manual control of the shutter/blinds can be switched on or off.

Parameterized as switching actuator, the settings switching output and staircase are available. At the configuration switch, all

settings are available which are necessary for a comprehensive parameterization. As well On-/Off-delay, normally opened mode

or normally closed mode, cyclic sending, central function, logical functions as scene function are adjustable. Additional the reset

behavior and the blocking behavior can be set.

Via the staircase function an automatic switch off after a determined time can be adjusted.

1.3 Exemplary Circuit diagrams

1.3.1 Switching actuator

Parameterized as switching actuator, the actuator is connected in the following way:

Illustration 3: Exemplary circuit diagram as 8-fold switching actuator

1.3.2 Mixed mode

Also arbitrary mixed modes are possible, e.g. in the following way:

Illustration 4: Exemplary circuit diagram as switching and shutter actuator

Illustration 5: Overview hardware module (KAA-8R)

1.4 Structure & Handling

The universal actuator (KAA-8) contains of a programming button as well as a programming-LED, which shows a activated

programming button. The universal actuator works with 230V AC. Every channel of the MRDC device contains of a status-LEDs.

The status-LEDs show an active run-up or an active run-down command.

With the buttons left/right you can chose the channel and with the buttons up/down you can move the channel down or up.

The following illustration shows a 8-fold universal actuator:

The functionality is the same for all channels. Depending on the hardware module the device contains of up to eight channels.

At the first step, every channel can be selected as not active, Switch/Staircase/switch impulse, heating control with PWM

not active

The channel becomes no more functions allocated. There are no more opportunities to parameterize the channel.

Switch, Staircase, switch impulse, heating control with PWM

Every channel of the pair of channels can be selected individually as switch or staircase switch impulse…etc. at the next,

step.

If the channel is selected as switch, different switching actions can be parameterized. Additional actions, like logic functions

and scene functions, can be parameterized.

If the channel is selected as staircase, a staircase function, which causes an automatic cutout after an adjusted time, can be

parameterized. Additional settings for the adjustment of the staircase function are available. Like switch, staircase function,

you can find corresponding setting when selecting “switch impulse” or “heating control with PWM”. Please find detail

information in Later chapter.

1.5 Functions

1.5.1 Overview at general setting and functions

1.5.2 Overview functions at the switch/staircase mode/switch impulse/heating

Control with PWM

Parameter

Group of functions

Group addresses

Reset behavior

Switch functions

Forced control /priority functions

Time functions

Staircase light functions

Functions

number of objects/connections=dynamic

(freely assignable of the user)

behavior at bus power breakdown

switching

locking function

on-delay

time for staircase

manual off

Extend time on/off

behavior at bus power up

central switching function

logic functions (AND/ OR)

off-delay

pre-warning (with adjustable warning and

pre-warning time)

startup timeout

normally closed/ normally openedRelay mode

Channel selection

Startup Timeout

Manual Operation

Eco Mode,

switch LED's off after

send “operation” cyclic

(0=not active)

General settings

Descriptions

not active

switching

staircase light

switch impulse

heating control with PWM

After the device is powered on, the delay

of relay closed/separated.

Whether to allow manual operation of the

panel

Eco mode

Use to periodically report device status

Chart 1: Overview general setting and functions

Selection at the product database:

Manufacturer: MEANWELL Enterprises Co. Ltd

Product family: Output

Product type: Universal actuator

Product name: addicted to the used type, e.g.: KAA-8R universal actuator 8-fold, 16A

Order number: addicted to the used type, e.g.: KAA-8R

After wiring, the allocation of the physical address and the parameterization of every channel follow:

(1) Connect the interface with the bus, e.g. MEANWELL USB interface KSI-01U

(2) Switching the power supply

(3) Set bus power up

(4) Press the programming button at the device(red programming LED lights)

(5) Loading of the physical address out of the ETS-Software by using the interface(red LED goes out, as well this process was

completed successful)

(6) Loading of the application, with requested parameterization

(7) If the device is enabled you can test the requested functions(also possible by using the ETS-Software)

1.6 Settings at the ETS-Software

1.7 Starting up

Group of functions

Scenes

State functions

Switch impulse functions

Heating control with PWM

Functions

scene function for up to 8 scenes per channel

feedback function

Impulse time

PWM function

locking function

Emergency mode

Chart 2: Overview functions for switch, staircase mode

2.Communication Objects

2.1 Global communication objects

2.2 Default settings of the central communication objects

The central communication objects are standardly shown. They contain as well the communication objects, which are only valid

for corresponding functions.

The following chart shows the default settings of the global communication objects:

Default settings

Nr. Object Function Length Priority C R W T U

1 Manual Control 1 it Low XBX

2 Switch On/Off 1 it Low X XB

3 1 Bit Low X XXOperation

Chart 3: Default settings of the central communication objects

2.3 Default settings of the communication objects for each functions

The following chart shows the default settings of the communication objects, if the pair of channels is selected as shutter/blinds:

Default settings

Nr. Name Object Function Length Priority C R W T U

6 Channel A Switch Off 1 it Low XOn/ B X

7 Channel A Lock 1 t Low XBi X

8 Channel A State 1 it Low X XBX

9 Channel A Inverted tate 1 it LowSB

XX X

10 Channel A Forced ontrol 2 t Low XCBiX

10 Channel A Priority ON/ riority 1 it Low XPOFF B X

11 AChannel Scene\scene number 1 yte Low XBX

11 AChannel Scene\scene control 1 yte Low XBX

12 AChannel Logic1 1 Bit Low X X

13 AChannel Logic2 1 Bit Low X X

14 Channel A Threshold switch\ percentage 1 yte Low XBX

14 Channel A Threshold switch\ratio 1Byte Low XX

14 Channel A Threshold witch pulses 2 te Lows\ By XX

14 Channel A Threshold s\twitch emperatur 2 Byte Low

Low

14 Channel A Threshold switch\lux 2 Byte XX

15 Channel A Service required

Time to next service\ time(h)

Time to next service\ time lag(s)

1Bit XX X

16 Channel A Response operating hours\ time lag(s) 4Byte XXX

16 Channel A Response operating hours \time(h) 2Byte X X X

16 Channel A 4 Byte X X X

You can see the default values for the communication objects from the upper chart. According to requirements the priority of the

particular communication objects as well as the flags can be adjusted by the user. The flags allocates the function of the objects in the

programming thereby stands C for communication, R for Read, W for write, T for transmit and U for update.

16 Channel A 2 Byte Low X X X

17 Channel A Reset Operation hours 1 it Low XBX

17 Channel A Reset ervice 1 t Low XSBiX

Default settings

Nr. Name Object Function Length Priority C R W T U

18 Channel A Staircase ight 1 it Low XlBX

19 Channel A Staircase ight th time 1 yte Low Xlwi B X

20 Channel A Prewarning 1 it Low XBX

21 Channel A Switch impulse 1 itBLow XX

22 Channel A State Emergency 1 it Low X XMode B X

23 Channel A Control alue 1 yte Low XVBX

+18 next pair of channels

Chart 4: Defaultsettingsofthecommunicationobjectsforeachfunctions

3.Reference ETS-Parameter – Switch for different application

3.1 General setting

The following illustration shows the menu of General setting.

Parameter Value Description

Startup Timeout 2 ~ 60s

After the device is powered on, the delay of relay closed/separated.

The manual operation allows the relay to be normally controlled during the delay

wait. If there is Object Communication, it will be recorded ﬁrst and will not re-

spond. The delay ends and the corresponding action is executed.

Manual Operation

active

disable

lockable over object

Whether to allow manual operation of the panel.

Lockable over object: means to enable or disable the Manual Operation via

Object.

Eco Mode,

switch LED' oﬀ after

not active

30S 1min 2min 5min

10min 20min 30min

40min 50min 60min

Power saving mode. After the set time delay, turn oﬀ the LED on the panel.

send " peration" cyclicO

(0=not active) 0 ~ 30000min Use to periodically report device status. It is independent Operation Object

3.2 Channel selection

To operate the universal actuator as switching actuator, at first the each channel, e.g. Channel A, must be selected

as “switching”, “staircase light”,” Switch impulse”...etc. At the next step, for each channel can be selected if the

channel shall operate as switch for different application.

The following illustration shows the submenu channel selection:

Illustration 6: Channel selection

The following chart shows the available settings for the channel selection:

ETS-text

Dynamic range

[default value]

comment

Channel A not active

switching

staircase light

switch impulse

heating control with PWM

Selection, if a pair of channels shall operate as switching

actuator or as shutter actuator.

Not active deactivates the pair of channels.

Channel A switching

staircase light

switch impulse

heating control with PWM

At the switching/staircase light/switch impulse

mode/heating control with PWM. Theses settings are

available.



Channel H

Chart 6: Available settings channel selection for switch/staircase

Each channel can operate as switch.

At the chapter 4, the switching actuator mode is descripted. Each channel can be parameterized as well as switching output or

as its described function

3.3 Identical parameter

The following parameters is available at channels selected as switch as at channels selected as switch.

The following diagram shows the behavior of the relay operating mode normally closed and normally opened. The input for

the channels is a KNX-telegram, which sends alternating 0-signals and 1-signals:

3.3.1 Relay operating mode

The following illustration shows the setting options for this parameter:

illustration 7: Operating mode

The following chart shows the dynamic range for this parameter:

ETS-text

Dynamic range

[default value]

comment

Mode

normally opened

normally closed

Relay channeloperating mode of the

On delay 0-3000s

When the channel output is in the Off state, the message information of ON is re-

ceived, and it takes a delay itch On.of n seconds to sw

If the received message is also to switch on the output during the waiting period, it

will be ignored.

Note: The " n Delay erlapped with the " tartup Timeout" time inOS" time here is not ov

the " eneral Setting" above.G

Off delay 0-3000s

When the channel output is in the On state, the message information of Off is re-

ceived, and it takes a delay itch to the Off output.of n seconds to sw

Note: " time here is not overThe " ff Delay lapped with the " tartup Timeout" timeOS

in the " eneral Setting" above.G

Chart 7: Operating mode

KNX telegram

101 100

State

Mode: “ normally opened”

Mode: “ normally closed”

OFF

Autres manuels pour KAA-8R Series

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Meanwell Contrôleurs

Meanwell

Meanwell DLC-02 Manuel utilisateur

Meanwell

Meanwell DUPS20 Manuel utilisateur

Meanwell

Meanwell ELG-200 Series Manuel utilisateur

Meanwell

Meanwell KAA-8R Series Manuel utilisateur

Meanwell

Meanwell CMU2C Manuel utilisateur

Meanwell

Meanwell DRC-40A Manuel utilisateur

Manuels Contrôleurs populaires d'autres marques

Digiplex

Digiplex DGP-848 Mode d'emploi

YASKAWA

YASKAWA SGM series Manuel utilisateur

Sinope

Sinope Calypso RM3500ZB Manuel utilisateur

Isimet

Isimet DLA Series Style 2 Manuel d'installation

LSIS

LSIS sv-ip5a Manuel utilisateur

Rockwell Automation

Rockwell Automation 1769-L31 Manuel utilisateur

Airflow

Airflow Uno hab Manuel utilisateur

ABB

ABB ACS580-01 drives Manuel utilisateur

Panasonic

Panasonic GM1 Series Manuel utilisateur

Emerson

Emerson SW93 Manuel utilisateur

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manuel utilisateur

Panasonic

Panasonic FP? Positioning Unit RTEX Manuel utilisateur

Samson

Samson Type 5824 Manuel de service

Alpha IP

Alpha IP MIOB 21001 Manuel utilisateur

Siemens

Siemens OpenAir GMA 1 Series Manuel utilisateur

Surecom

Surecom SR-629 Manuel utilisateur

Fishman

Fishman TriplePlay Manuel utilisateur

Regulus

Regulus SRS1 T Manuel utilisateur