MCZ STAR AIR 8 M2 Manuel utilisateur

INSTALLATION GUIDE GB

SEALED PELLET STOVE

EGO/STAR AIR 8 M2

EGO/STAR COMFORT AIR 10 M2

PART 2 - OPERATION AND CLEANING

Translation of original instructions

TABLE OF CONTENTS

TABLE OF CONTENTS .................................................................................................. II

19FIRST STARTUP.....................................................................................................3

20GRAPHIC PANEL.....................................................................................................4

21DISPLAYS ..............................................................................................................6

22OPERATING MODES................................................................................................9

23SELECTING THE OPERATING MODES.......................................................................13

24MANUAL MODE....................................................................................................14

25AUTO MODE.........................................................................................................15

26COMFORT MODE...................................................................................................16

27OVERNIGHT MODE ...............................................................................................17

28TURBO MODE.......................................................................................................18

29  FANS..................................................................................................................19

30SILENT MODE.......................................................................................................21

31START&STOP .......................................................................................................22

32CHRONOSLEEP....................................................................................................25

33  WIFI/WPS/BLUETOOTH......................................................................................34

34SHUTDOWN.........................................................................................................37

35EXTRA DISPLAYS..................................................................................................38

36USER MENU.........................................................................................................41

37PELLET LEVEL SENSOR..........................................................................................46

38EXTERNAL THERMOSTAT.......................................................................................47

39SAFETY DEVICES ..................................................................................................48

40ALARMS ..............................................................................................................49

41RECOMMENDATIONS FOR SAFE USE.......................................................................56

42CLEANING ...........................................................................................................57

43TROUBLESHOOTING .............................................................................................65

44CIRCUIT BOARD ...................................................................................................68

19-FIRST START-UP

WARNINGS BEFORE IGNITION

GENERAL WARNINGS

Remove all parts that may burn from the brazier and the glass (manual, various adhesive labels or any polystyrene).

Check that the brazier is positioned correctly and rests properly on the base.

The rst ignition may not be successful as the feed screw is empty and does not always manage to load the brazier

with the required amount of pellets in time to light the ame.

CLEAR THE FAILED IGNITION ALARM FROM THE STOVE PANEL OR APP.

REMOVE THE PELLETS LEFT IN THE BRAZIER AND REPEAT IGNITION.

If, after repeated attempts, the ame fails to ignite, despite a regular ow of pellets, check the correct positioning of the brazier, which

must rest snugly against the slots. If no anomaly is found during this inspection, there may be a problem with the product components

or installation may not be correct.

REMOVE THE PELLETS FROM THE BRAZIER AND CONTACT AN AUTHORISED TECHNICIAN.

Do not touch the stove during the rst start-up, as it is during this phase that the paint sets. If you touch the paint,

you may expose the steel surface.

It is good practice to ensure eective ventilation in the room during the initial start-up, as the stove will emit some

smoke and smell of paint.

If necessary, touch up the paint with the spray can of the specic colour.

Do not stand close to the stove and, as mentioned, air out the room. The smoke and smell of paint will disappear after about an hour of

operation, however, they are not harmful in any case.

The product will be subject to expansion and contraction during the start-up and cooling stages, therefore slight

creaking noises may be heard. This is perfectly normal as the structure is made of laminated steel and must not be

considered a defect.

Upon rst ignition, for the rst pellet hopper, it is recommended to start the stove at maximum power so that the structure and the

smell of the paint settle more quickly.

It is recommended to install the ceramic or serpentine stone cladding after the rst successful ignition.

DO NOT EXPECT HEATING EFFICIENCY IMMEDIATELY!!!

20-GRAPHIC PANEL

MAESTRO GRAPHIC PANEL

The“foldaway” panel is located at the back of the product. Grasp the panel at the sides with your hand and lift it. The panel will block in

the raised position. The display is graphic only while the controls are“soft touch”

Attention! It is advisable to put the panel in the “HIDDEN” position while loading the pellet.

20-GRAPHIC PANEL

KEY FUNCTIONS

CONTROL AND MENU SCROLLING KEYS FAN CONTROL MENU

NAVIGATION IN THE DIFFERENT OPERATING

MODES (PROGRAMMES)

ON/OFF AND CONFIRMATION OF MENU

CHOICES

START&STOP ENABLING/DISABLING

GRAPHIC DISPLAY

CHRONO/SLEEP ENABLING/DISABLING

21-DISPLAYS

DISPLAY AT FIRST PRODUCT IGNITION

The display shows an additional sequence to that described in the following paragraph only when the product is rst powered up. This

additional sequence makes it possible to adjust/conrm the current date and time (to make the adjustment later, see the dedicated user

menu paragraph).

DISPLAY UPON SUBSEQUENT PRODUCT FEEDING

Each time the product is powered, the display shows the following sequence:

The Bluetooth sensor (if active) will search for the previously paired devices (see the Bluetooth chapter).

21-DISPLAYS

Display with the product o

1. WI-FI active and connected, the icon is only present if the product is connected to a router or a network.

2. Bluetooth active and/or connected.The icon is present if the Bluetooth has been activated and turns blue if it is connected to a

paired device.

3. Room temperature recorded by the local probe or remote control (OPTIONAL)

4. Current time

5. Active Chrono Programming

6. Icon that identies the need for end-of-season maintenance (2000 h)

7. Pellet reserve light (OPTIONAL)

8. OFF/STANDBY in case of active START&STOP.

The keys are all lit because during this phase each key can allow you to activate functions or access dedicated menus

The icon has a steady white light if the product is o and cold. For the other lighting states of the key, see the shutdown chapters.

After 2 minutes (standard time that can be changed from the menu), the displays goes into standby/energy saving mode (see chap.

“DISPLAYS”)

21-DISPLAYS

Display with the product on

1. COMFORT mode

2. Operating mode crown

3. WI-FI active and connected

4. Bluetooth active and connected

5. AUTO mode

6. OVERNIGHT mode

7. Room temperature recorded by the local probe or remote control (OPTIONAL)

8. Flame power in MANUAL mode or room temperature set in AUTO/COMFORT/OVERNIGHT mode

9. TURBO mode

10. Pellet reserve light (OPTIONAL)

11. MANUAL mode (the active mode shown in this picture)

12. Chrono or Sleep active (see dedicated paragraph for the correct iconography for each function)

22-OPERATING MODES

MAESTRO technology allows the heater to express its utmost potential with even an easier and more intuitive use. A real integrated

micro-computer communicates with your smartphone and further improves the performance of the equipment that continues to work

perfectly even in non-ideal conditions.

It has 5 preset settings making product management even easier, the consumption of the fuel is optimised and improves the comfort of

use, as it can reach extremely quiet operation.

The available settings are:

COMFORT Ideal for all situations requiring maximum comfort. This mode allows an optimised consumption of the fuel to guarantee

a good heating capacity and the best possible silent operation. Once this mode is activated, the user only has to choose the desired

temperature and the appliance will independently manage the ame and ventilation power to ensure maximum comfort. In fact, in this

mode it is not possible to change the power and ventilation, managed intelligently by the MAESTRO system.

AUTO if you prefer traditional automatic operation with the option of setting the temperature and ventilation.

OVERNIGHTGuaranteesthemaximumsilencepossible(noisereduced up to 4 times) allowing the maintenance of the roomtemperature.

This mode is designed, in fact, for night-time operation or temperature conservation in an already pre-heated room ensuring the lowest

possible acoustic impact. In Overnight mode consumption and ventilation are managed intelligently by the MAESTRO system and for this

reason it is not possible to change its values.

MANUAL For those who prefer to use the product in the traditional manner without any temperature control. In this mode the user can

freely choose the mix of ame power and ventilation regardless of consumption or silence.

TURBOOperation at maximum power and ventilation expressed by the product for a limited time (20 min) in order to allow rapid heating

of a cold room. For the expected performance and consumption in this mode, this function can be reactivated only once every hour.

Quiet operation * Comfort** Heating capacity Reduced consumption

COMFORT

OVERNIGHT

TURBO

AUTO

MANUAL

* In operation, during start-up and shutdown

** Gradual heat emission, glass cleaning and combustion chamber cleaning

22-OPERATING MODES

DISPLAY STANDBY

The panel automatically goes into STAND-BY mode after a 2”time-out (the time can be changed from the panel menu).

The stand-by mode still indicates changes in the operating mode of the equipment (e.g.: pellet reserve, shutdown or cooling) and the

room temperature changes with a 60 second interval.

DISPLAY WITH THE PRODUCT OFF

When the display is in stand-by with the product o, the room

temperature, the current time and the word OFF appear; the keys

below turn o.

Simply press any key to awaken the display from this state.

DISPLAY WITH THE PRODUCT ON

When the display is in stand-by with the product on, the room

temperature, the current time, the word ON and the equipment

operating mode icon appear.

Simply press any key to awaken the display from this state.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels MCZ Poêle

MCZ

MCZ STAR Hydromatic 12 M2 Manuel utilisateur

MCZ

MCZ GHEA AIR 6 XUP! S1 Manuel utilisateur

MCZ

MCZ SUITE AIR 10 M2 Manuel utilisateur

MCZ

MCZ EGO/STAR AIR 8 M3 Manuel utilisateur

MCZ

MCZ SUITE AIR 10 UP! M1 Manuel utilisateur

MCZ

MCZ Omega Mode d’emploi

MCZ

MCZ GIO' AIR 8 S1 Manuel utilisateur

MCZ

MCZ SUITE AIR 10 UP! M2 Manuel utilisateur

MCZ

MCZ SUITE Mode d’emploi

MCZ

MCZ JAZZ Hydromatic 30 M1 Manuel utilisateur

MCZ

MCZ SUITE-CLUB-MUSA Hydromatic 18 M2 Manuel utilisateur

MCZ

MCZ Kaika Oyster Mode d’emploi

MCZ

MCZ DECO' AIR 8 M1 Caractéristiques techniques

MCZ

MCZ ANTHEA Mode d’emploi

MCZ

MCZ MOOD COMFORT AIR 8 M1 Manuel utilisateur

MCZ

MCZ AKI Hydromatic 16/24 M1 Manuel utilisateur

MCZ

MCZ CUTE AIR 8 M1 Caractéristiques techniques

MCZ

MCZ PHILO COMFORT AIR 14 UP! M2 Manuel utilisateur

MCZ

MCZ stub Manuel utilisateur

MCZ

MCZ TEIA COMFORT AIR 10 UP!S2 Guide de configuration

MCZ

MCZ BOXTHERM 70 AIR 9 SLIDE M1 Manuel utilisateur

MCZ

MCZ CLUB COMFORT AIRMATIC 14 M2 Guide de configuration

MCZ

MCZ EGO Manuel utilisateur

MCZ

MCZ WALL AIR 8 UP! M1 Caractéristiques techniques

Manuels Poêle populaires d'autres marques

Arada

Arada Cassette Stove Manuel utilisateur

Parmco

Parmco FS 600 Manuel utilisateur

HearthStone

HearthStone Stowe DV 8321 Guide de dépannage

Cattara

Cattara FAMILY Manuel utilisateur

Stanley

Stanley Argon F500 OVAL Manuel utilisateur

Avalon

Avalon B-VENT Manuel utilisateur

Nordpeis

Nordpeis Vega Manuel utilisateur

Exquisit

Exquisit EKC601-5 Manuel d'utilisation

Stanley

Stanley Oisin Oil MK II Manuel du propriétaire

Thermocet

Thermocet Brookfield S/CC Manuel utilisateur

HASE

HASE delhi Manuel utilisateur

Vermont Castings

Vermont Castings Intrepid 2 Manuel utilisateur

Italiana Camini

Italiana Camini CLASSICA Guide de démarrage rapide

Avalon

Avalon Vashon Avanti DVS FS Manuel utilisateur

Spartherm

Spartherm ambiente a1 Manuel utilisateur

Dimplex

Dimplex MCFSTV12AU Manuel utilisateur

Warmlite

Warmlite WL46040 Manuel utilisateur

Regency

Regency Ultimate U39E Series Guide de démarrage rapide