McHale 995 L+T Square Bale Wrapper
7
2
Product Information
The McHale 995 L+T is protected against many dangers to itself while being operated
from the control box, in manual and fully automatic modes. However, it is of the utmost
importancefor the safetyof the operatorand for others, thatthe operator paysattention
to all warnings and instructions given in this manual. In particular all safety devices,
decals, guards and controls must be in place and in fully functioning condition. Never
try to clear any malfunction when the tractor is switched on or while the machine is
running. Keep the “Danger Zone” (An area around the machine, detailed in “Danger
Zone” on page 13) free of all persons and animals at all times, while the machine is in
operation. This manual must be read and fully understood by anyone who will operate
the machine.
2.1 Designated use of the machine
The McHale 995 L+T is exclusively designed for normal use in agricultural
applications. The machine has been designed to wrap rectangular/square bales of
forage with plastic stretch film for the purpose of storing as fodder for feeding livestock.
This wrapper can also wrap round bales with equal efficiency. This designation
includes the movement of the machine, between fields by track or road, incidental to
the square wrapper’s main use. The manufacturer will not be held responsible for any
loss or damage resulting from machine applications other than those specified above.
Any other use the machine may be put to, is entirely at the owners/operators risk.
The designated use of the machine includes that:
the operating, maintenance and repair instructions given by the manufacturer
will be strictly fulfilled
exclusively persons who are familiar with it and instructed about the risks are
entitled to operate, maintain and/or repair the machine
the relevant health and safety requirements, that may be in force in the
country of use, will be strictly followed
no other equipment or accessories, other than released by McHale, are
installed in the machine. The use of any other equipment or accessory is
entirely at the owner/operators risk. In such cases, unauthorised
modifications/changes exclude any liability of the manufacturer.
WARNING: Loss of machine validity
By any alteration of safety equipment, the declaration of conformity and
the CE sign loses it’s validity for this machine.
