McDATA ULTRANETTM EDGE STORAGE ROUTER 3000 Manuel utilisateur

UltraNet™ Edge Storage Router

3000

Release 3.2

User Guide

P/N 620-000248-030 REV A

UltraNet™ Edge Storage Router 3000 User Guide

Record of Revisions and Updates

Printed December 2006

First Edition

No part of this publication may be reproduced or distributed in any form or by any means, or stored in a

database or retrieval system, without the prior written consent of McDATA Corporation.

The information contained in this document is subject to change without notice. McDATA Corporation

assumes no responsibility for any errors that may appear.

All computer software programs, including but not limited to microcode, described in this document are

furnished under a license, and may be used or copied only in accordance with the terms of such license.

McDATA either owns or has the right to license the computer software programs described in this document.

McDATA Corporation retains all rights, title and interest in the computer software programs.

McDATA Corporation makes no warranties, expressed or implied, by operation of law or otherwise, relating

to this document, the products or the computer software programs described herein. McDATA

CORPORATION DISCLAIMS ALL IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR

A PARTICULAR PURPOSE. In no event shall McDATA Corporation be liable for (a) incidental, indirect,

special, or consequential damages or (b) any damages whatsoever resulting from the loss of use, data or

profits, arising out of this document, even if advised of the possibility of such damages.

McDATA Eclipse, Fabricenter, HotCAT, Intrepid, Multi-Capable Storage Network Solutions, Networking the

World's Business Data, nScale, nView, OPENready, SANavigator, SANpilot, SANtegrity, SANvergence,

SecureConnect and Sphereon are trademarks or registered trademarks of McDATA Corporation. OEM and

Reseller logos are the property of such parties and are reprinted with limited use permission. All other

trademarks are the property of their respective companies. All specifications subject to change.

Revision Date Description

620-000248-000 8/2005 Initial release of this manual under the

McDATA label.

620-000248-313 11/2005 Edge Storage Router 3000 Release 3.1.3

620-000248-010 6/2006 Edge Storage Router 3000 Release

3.1.4,RoHS compliant Gigabit Ethernet.

620-000248-020 7/2006 Edge Storage Router 3000 Release 3.1.5.

RoHS compliant OC-3 ATM.

620-000248-030 12/2006 Edge Storage Router 3000 Release 3.2.

FICON Tape Read, Adaptive Rate Limiting,

RoHS compliant 10/100 Ethernet.

iii

Chapter 1 Introduction

Introducing the UltraNet Edge 3000 ..............................................1-1

UltraNet Edge 3000 Benefits............................................................1-3

UltraNet Edge 3000 Features...........................................................1-4

UltraNet Edge 3000 Security ...........................................................1-7

Chapter 2 Hardware Configurations

UltraNet Edge 3000 Featurization ..................................................2-1

Typical Configuration of the UltraNet Edge 3000........................2-5

Ethernet Configurations ...........................................................2-5

ATM WAN Configurations ......................................................2-6

FC/SCSI Tape Pipelining..........................................................2-6

Valid Hardware Interface Configurations.....................................2-7

Fibre Channel Card Dependencies.................................................2-8

FC/SCSI E_port Configurations..............................................2-8

FC/SCSI F_port Configurations..............................................2-9

FC/SCSI N_port Configurations.............................................2-9

FICON Port Configurations ...................................................2-10

Internal Fibre Channel Switch (FCSW)........................................2-11

Hardware Components..................................................................2-11

Indicators, Switches, and Interfaces.............................................2-13

Chapter 3 Network Design Criteria

Network Design ................................................................................3-1

Ethernet Network Criteria........................................................3-1

ATM Network Criteria..............................................................3-5

Network Routing Options...............................................................3-8

Dedicated ....................................................................................3-8

Contents

UltraNet™ Edge Storage Router 3000 User Guide

Contents

Load Balancing ..........................................................................3-9

Fail Over......................................................................................3-9

Switch WWN Proxy .......................................................................3-10

E_Port Disk Streaming Network Recommendations ................3-10

Required Minimum Hardware for E_Port Disk Streaming......3-11

E_Port Disk Streaming Compatibility Matrix ............................ 3-11

Fibre Channel Frame Level CRC..................................................3-12

Frame Level CRC on the FCBB Card....................................3-12

Frame Level CRC on the FCXL2 Card..................................3-12

Fibre Channel End to End CRC....................................................3-13

Minimum Requirements for CRC ................................................3-14

Fibre Channel MTU Batching .......................................................3-14

Chapter 4 Building a Custom Edge 3000 Chassis

Building the Custom Chassis..........................................................4-1

Starting UltraNet ConfigManager ..........................................4-1

Using the Custom Chassis Wizard..........................................4-1

Chapter 5 Configuring an E_Port Extension over an Ethernet WAN

Configuring a 1x1 Ethernet Wide Area Network ........................5-1

Gathering the IP Addresses .....................................................5-2

Starting UltraNet ConfigManager ..........................................5-3

Adding Nodes for an Ethernet WAN Configuration ...........5-3

Adding a Fibre Channel Interface...........................................5-5

Setting the Initial Configuration..............................................5-6

Setting the License Information...............................................5-9

Adding an IP Circuit...............................................................5-11

Creating a Data Path ...............................................................5-20

Delivering the Configured Network............................................5-24

Setting the Delivery Properties..............................................5-25

Delivery Wizard.......................................................................5-26

Deliver Network......................................................................5-28

Viewing Logs............................................................................5-28

Chapter 6 Configuring an F_Port Extension over an Ethernet WAN

Configuring a 2x2 Ethernet Wide Area Network ........................6-1

Gathering the IP Addresses .....................................................6-2

Starting UltraNet ConfigManager ..........................................6-3

Adding Nodes for an Ethernet WAN Configuration ...........6-4

Setting the Initial Configuration..............................................6-7

Setting the License Information.............................................6-10

Contents

Adding an IP Circuit .............................................................. 6-12

Creating Data Paths for Fibre Channel Switch Interfaces. 6-21

Delivering the Configured Network ........................................... 6-26

Setting the Delivery Properties ............................................. 6-27

Delivery Wizard ...................................................................... 6-27

Deliver Network ..................................................................... 6-30

Viewing Logs ........................................................................... 6-30

Chapter 7 Configuring an E_Port Extension over an ATM WAN

Configuring a 1x1 ATM Wide Area Network .............................. 7-1

Gathering the IP Addresses..................................................... 7-2

Starting UltraNet ConfigManager.......................................... 7-3

Adding Nodes for an ATM WAN Configuration................. 7-3

Setting the Initial Configuration ............................................. 7-6

Setting the License Information .............................................. 7-9

Adding an ATM Circuit ......................................................... 7-11

Creating a Data Path............................................................... 7-24

Delivering the Configured Network ........................................... 7-30

Setting the Delivery Properties ............................................. 7-30

Delivery Wizard ...................................................................... 7-31

Deliver Network ..................................................................... 7-33

Viewing Logs ........................................................................... 7-34

Chapter 8 Configuring FICON Extension

Configuring a 1x1 Ethernet Wide Area Network ........................ 8-1

Gathering the IP Addresses..................................................... 8-2

Starting UltraNet ConfigManager.......................................... 8-3

Adding Nodes for an Ethernet WAN Configuration........... 8-4

Adding a Fibre Channel Interface .......................................... 8-5

Setting the Initial Configuration ............................................. 8-7

Setting the License Information ............................................ 8-10

Adding an IP Circuit .............................................................. 8-12

Creating a FICON Data Path................................................. 8-20

Using the FICON Global Settings Wizard........................... 8-24

Delivering the Configured Network ........................................... 8-31

Setting the Delivery Properties ............................................. 8-31

Delivery Wizard ...................................................................... 8-32

Deliver Network ..................................................................... 8-34

Viewing Logs ........................................................................... 8-35

UltraNet™ Edge Storage Router 3000 User Guide

Contents

Chapter 9 Configuring Tape Device Extension

Setup Prior to Edge Configuration.................................................9-1

Network Configuration Examples .................................................9-2

Example of Uni-directional Configuration - No Zoning .....9-2

Example of Bi-directional Configuration with Zoning........9-3

Example of Bi-directional Configuration - Zoning and

Optional LUN Mapping ...........................................................9-4

Required Fibre Channel Switch Zoning.................................9-4

Required Static Edge LUN Mapping......................................9-5

Required Source WWN Filtering ............................................9-7

Configuring Tape Device Extension ..............................................9-8

Gathering the IP Addresses .....................................................9-9

Starting UltraNet ConfigManager ........................................9-10

Adding Nodes for an Ethernet WAN Configuration.........9-11

Setting the Initial Configuration............................................9-13

Setting the License Information.............................................9-16

Adding an IP Circuit...............................................................9-18

Creating a Data Path for Fibre Channel Device Extension

Interfaces...................................................................................9-26

Static Mapping the LUNs and Filtering the Source WWN ......

9-32

Delivering the Configured Network............................................9-42

Setting the Delivery Properties..............................................9-43

Delivery Wizard.......................................................................9-43

Deliver Network......................................................................9-46

Viewing Logs............................................................................9-46

Chapter 10 FC/SCSI Tape Pipelining

Buffering, Emulation, and Data Protection.................................10-1

Buffering and Emulation ........................................................10-1

Device Error Recovery ............................................................10-2

UltraNet Edge 3000 Emulation..............................................10-2

Protecting the Data..................................................................10-2

UltraNet Edge 3000 Specific..........................................................10-3

Fibre Channel ...........................................................................10-3

Tape Only..................................................................................10-3

LUN Mapping..........................................................................10-3

Dynamic Target LUN Discovery and LUN Mapping ...............10-4

Overview ..................................................................................10-4

Target Discovery ......................................................................10-4

LUN Discovery ........................................................................10-5

LUN Refresh.............................................................................10-5

vii

Contents

Dynamic LUN Mapping ........................................................ 10-5

Static LUN Mapping............................................................... 10-5

Managing the WWN to Edge Target LUNs ........................ 10-6

Chapter 11 Product Support and Software Maintenance

SNMP Support................................................................................ 11-1

Upgrading the UltraNet Edge 3000 Software ............................ 11-1

Verify your Current Software Version.................................. 11-2

Upgrading the UltraNet Edge 3000 - On-Site Local........... 11-2

Upgrading the UltraNet Edge 3000 - Remote Dial-up ...... 11-6

Upgrading Edge Software from 3.1.1.1 or Higher ........... 11-10

UltraNet WebView Monitoring Application.............................11-11

Obtaining the UltraNet WebView Product ....................... 11-12

Using the WebView Application......................................... 11-12

Browser and System Requirements for WebView............ 11-12

WebView Security ................................................................. 11-12

UltraNet WebView Upgrade ............................................... 11-12

UltraNet ConfigManager Upgrade ........................................... 11-14

Verify the Current Version of UltraNet ConfigManager. 11-14

Upgrading the UltraNet ConfigManager Software ......... 11-15

Chapter 12 Hardware Maintenance

Front and Rear View of UltraNet Edge 3000 Chassis ............... 12-2

Replacing the UltraNet Edge 3000 Chassis ................................ 12-2

Fan Assembly Removal Procedure.............................................. 12-3

Fan Assembly Installation Procedure ......................................... 12-4

Power Supply Removal Procedure.............................................. 12-5

Power Supply Installation Procedure ......................................... 12-7

Top Cover Removal Procedure .................................................... 12-7

Top Cover Installation Procedure ................................................ 12-8

Fibre Channel Interface Card Removal Procedure.................... 12-9

Fibre Channel Interface Card Installation Procedure ............. 12-10

10/100 Ethernet Interface Card Removal Procedure.............. 12-11

10/100 Ethernet Interface Card Installation Procedure.......... 12-12

Gigabit Ethernet Interface Card Removal Procedure ............. 12-13

Gigabit Ethernet Interface Card Installation Procedure ......... 12-14

OC-3 ATM Interface Card Removal Procedure ....................... 12-15

OC-3 ATM Interface Card Installation Procedure................... 12-16

Replacing the Gigabit Ethernet Short Wave Transceiver........ 12-17

Removing the Gig-E Short Wave SFP Transceiver ........... 12-18

Installing the Gig-E Short Wave SFP Transceiver............. 12-19

UltraNet™ Edge Storage Router 3000 User Guide

viii

Contents

Replacing the Gigabit Ethernet Long Wave Transceiver ........12-21

Removing the Gig-E Long Wave SFP Transceiver............12-21

Installing the Gig-E Long Wave SFP Transceiver .............12-22

Replacing the Gigabit Ethernet Copper Transceiver ...............12-23

Removing the Gig-E Copper Transceiver ..........................12-23

Installing the Gig-E Copper Transceiver............................12-24

Replacing the OC-3 ATM Short Wave Transceiver..................12-25

Removing the OC-3 ATM Short Wave SFP Transceiver ..12-25

Installing the OC-3 ATM Short Wave SFP Transceiver....12-26

Replacing the OC-3 ATM Long Wave Transceiver ..................12-27

Removing the OC-3 ATM Long Wave SFP Transceiver...12-27

Installing the OC-3 ATM Long Wave SFP Transceiver ....12-28

Replacing the Fibre Channel Short Wave Transceiver ............12-29

Removing the Fibre Channel Short Wave SFP Transceiver......

12-29

Installing the Fibre Channel Short Wave SFP Transceiver .......

12-30

Replacing the Fibre Channel Long Wave Transceiver.............12-32

Removing the Fibre Channel Long Wave SFP Transceiver ......

12-32

Installing the Fibre Channel Long Wave SFP Transceiver........

12-33

Chapter 13 Troubleshooting and Diagnostics

Basic Troubleshooting for the UltraNet Edge 3000....................13-1

User Interface Commands for the UltraNet Edge 3000 ............13-1

Display the User Interface Commands ................................13-2

IP ................................................................................................13-2

TANKIO....................................................................................13-3

ARP............................................................................................13-3

AMDENET 10/100 WAN or Maintenance Interface..........13-4

GNIC3 Gigabit Ethernet WAN ..............................................13-6

gnic3 stats .................................................................................13-6

FCCNT ......................................................................................13-8

FCSW.......................................................................................13-10

FCXL2......................................................................................13-10

CHARM ..................................................................................13-12

SUPPORT................................................................................13-12

LED Diagnostic Codes..........................................................13-12

Troubleshooting FC/SCSI Tape Pipelining (Device Extension) .....

13-13

Basic Troubleshooting Steps for FC/SCSI Tape Pipelining......

Contents

13-14

Diagnostics .................................................................................... 13-16

Serial Interface Connection.................................................. 13-17

Ethernet Maintenance Interface Connection..................... 13-17

Loading and Starting the Diagnostic Program................. 13-18

Exit and Reboot ..................................................................... 13-18

UltraNet Edge 3000 Diagnostic Programs................................ 13-19

CHARM Diagnostic Program (ACHT).............................. 13-19

PowerPC Diagnostic Program (SBTT) ............................... 13-21

Fibre Channel Diagnostic Program (FCBB)....................... 13-22

Ethernet Diagnostic Program (E10T) ................................. 13-24

Gigabit Ethernet Diagnostic Program (GBIT)................... 13-25

ZPCM Compression Diagnostic Program (ZPCT)........... 13-27

Flash Drive Diagnostic Program (ISBT)............................. 13-29

Graceful Shutdown...................................................................... 13-30

Appendix A Site Preparation

Site Requirements ........................................................................... A-1

UltraNet Edge 3000 Chassis Dimensions ............................. A-1

Clearance Requirements ................................................................ A-2

Environmental Specifications................................................. A-3

Power Requirements ............................................................... A-4

Appendix B Installation and Cabling

Overview ..........................................................................................B-1

Unpacking and Inspecting the Hardware ...................................B-2

UltraNet Edge 3000 Placement ......................................................B-2

Table-Top ....................................................................................B-2

Rack Mount................................................................................B-2

Connecting the UltraNet Edge 3000 .............................................B-4

Setup Connection......................................................................B-4

Power Connection.....................................................................B-5

Network Interface Connections ....................................................B-6

Fibre Channel Cabling..............................................................B-6

Ethernet 10/100 Cabling..........................................................B-8

Gigabit Ethernet Cabling .........................................................B-9

OC-3 ATM Cabling and Transceivers ..................................B-10

Initial Power-On Procedure .........................................................B-10

Maintenance and Diagnostics Connections ..............................B-12

Serial Interface Cabling Instructions ....................................B-12

Cables and Equipment .................................................................B-14

McDATA-Supplied Cables and Equipment........................B-14

UltraNet™ Edge Storage Router 3000 User Guide

Contents

Customer-Supplied Cables and Equipment....................... B-15

Preventing Damage from Electrostatic Discharge (ESD) ........ B-15

Appendix C Cables, Connectors, and Adapters

RS-232 Cables with RJ-45 Connector ...........................................C-1

DB Adapters ....................................................................................C-1

Fibre Channel Specifications .........................................................C-4

Ethernet 10/100 Specifications .....................................................C-6

Gigabit Ethernet Specifications .....................................................C-6

OC-3 ATM Specifications ..............................................................C-8

Appendix D Advanced UCM Configurations

Configuring the Internal McDATA Fibre Channel Switch

Interface ............................................................................................D-1

FCSW Tab (2 port only) ...........................................................D-2

FC Switch Tab............................................................................D-3

Time Synchronization Protocol .....................................................D-6

Configure the Time Synchronization Protocol .....................D-6

Transport CRC Checking ...............................................................D-8

E_Port Disk Streaming Settings ....................................................D-9

Enable/Disable E_Port Disk Streaming ................................D-9

F_Port Disk Streaming Settings ..................................................D-10

Enable/Disable F_Port Disk Streaming ..............................D-10

Appendix E Modifying Static Routes

Display Static Routes ...................................................................... E-1

Verify Static Routes ......................................................................... E-2

Modify Static Routes ...................................................................... E-4

Add Static Routes ........................................................................... E-4

Delete Static Routes ........................................................................ E-4

Appendix F Configure SNMP

Adding an SNMP Trap Destination........................................F-6

Deleting an SNMP Destination ...............................................F-6

Sending Test Trap ......................................................................F-6

SNMP Software Packages ...............................................................F-7

Appendix G Resetting the System to Factory Defaults

Overview of the Sysclean Command ..........................................G-1

Using the Sysclean Command ......................................................G-1

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels McDATA Routeur réseau

McDATA

McDATA Eclipse 2640 SAN Feuille d'instructions

Manuels Routeur réseau populaires d'autres marques

Allnet

Allnet ALL0333AU Manuel utilisateur

HomeSeer

HomeSeer HT-SEL Manuel utilisateur

Sercomm

Sercomm Genesis OC3505D Manuel utilisateur

Billion

Billion BIPAC 5102 Series Manuel utilisateur

TP-Link

TP-Link TD-8817 Manuel utilisateur

Motorola

Motorola MR1900 Manuel utilisateur

Digi

Digi IX14 Manuel utilisateur

Cisco

Cisco NCS 540 Manuel

XAVi

XAVi X8821e Manuel utilisateur

BEC

BEC 6200WZL Manuel utilisateur

MikroTik

MikroTik hAP ac3 Series Manuel utilisateur

Korenix

Korenix JetNet 5428G Series Manuel utilisateur

NETGEAR

NETGEAR FS526T - Switch Manuel utilisateur

Korenix

Korenix JetNet 5710G Series Manuel utilisateur

Automated Logic

Automated Logic ZN551 Manuel du propriétaire

Cisco

Cisco ASR 1000 Series Manuel de l'opérateur

EnGenius

EnGenius ESR-9710 Manuel utilisateur

Cisco

Cisco 805 Series Instructions d'utilisation et de sécurité