MBS X Series Manuel utilisateur

Quick Start

Universal BACnet Router

Universal Gateway

2020/07

2 of 12

Table of contents

1Introduction.............................................................. 3

2Safety ........................................................................ 4

3Specifications.......................................................... 5

Mechanical data ...................................................................................5

Ambient conditions..............................................................................5

Power supply BACnet Router ...........................................................5

Power supply Gateways X-Serie......................................................5

Power supply Gateways A-Serie......................................................6

Network connection for configuration............................................6

4Installation................................................................ 6

5Configuration........................................................... 8

Connection to the device...................................................................8

Configuration interface.......................................................................9

Reset...................................................................................................... 10

6Product support....................................................11

7Notes.......................................................................12

Imprint

Manufacturer: MBS GmbH, Römerstraße 15, 47809 Krefeld

; Managing Director: Martin Brust-Theiß, Gerhard Memmen-Krüger, Nils-Gunnar Fritz; Register court: Krefeld HRB 3337

;

USt.

-IdNr: DE 120 148 529; Headquarters: Krefeld; Responsible for contents according to § 5 TMG such as § 55 RStV: Martin Brust-Theiß, Gerhard Memmen-Krüger, Nils-Gunnar Fritz

3 of 12

1Introduction

Quick Start

This manual enables the basic installation and configuration work

to be carried out on the device.

It must be read carefully before installation and

commissioning.

Comprehensive information is provided online in the manual for

the respective device:

www.

mbs-solutions.de/dokumentation

Target group

This manual is intended exclusively for specialist personnel who

are familiar with gateway and

router configuration in building

automation.

Intended use

The device is only intended for the coupling of networks in

building and industrial automation with the connection values

specified by the manufacturer.

4 of 12

2Safety

The hardware and software present no direct hazards. However,

in their function as a router or gateway between networks in

building infrastructures, they are able to seriously disrupt the

interaction of network components.

Warning

Misconfiguration of hardware and software!

Faulty configuration of hardware and software can cause

malfunctions in the building infrastructure on network

components, sensors or actuators, for example:

•Monitoring devices, such as fire alarm or intrusion

detection systems, are deactivated.

•Machines and fans start up unexpectedly.

•Gate valves and other valves open or close unintentionally.

Under certain circumstances, this can lead to serious injuries

or death.

The device should only be configured by specialist

personnel who are familiar with network configuration!

A connection to a network must not be established before

the device has been fully configured!

5 of 12

3Specifications

Mechanical data

Casing Metal casing for top-hat rail mounting

Assembly DIN top-hat rail TS35

in accordance with EN 60715

Weight depending on type, see manual

H/W/D dimensions depending on type, see manual

Ambient conditions

Ambient temperature 0…45°C, 32…113°F

Ambient humidity 20 to 80 percent relative humidity,

non-condensing

Recommended lateral

spacing

≥ 15 mm to other devices on the

top-hat rail

Power supply BACnet Router

UBR-01 | Mk II Wide range input

12 to 24 Volt direct voltage or

12 to 24 Volt alternating voltage

UBR | LON

UBR-02

Power consumption depending on type, see manual

Power supply Gateways X-Serie

Single-X Wide range input

12 to 24 Volt direct voltage or

12 to 24 Volt alternating voltage

Double-X

Triple-X

Power consumption depending on type, see manual

6 of 12

Power supply Gateways A-Serie

maxi | Mk II, Single-A +12 to +24 Volt direct voltage

tolerance +/- 15%

PELV

maxi | Mk II, Double A

Power consumption depending on type, see manual

Network connection for configuration

Ethernet 10/100 Mbit, RJ45 socket

4Installation

Warning

Electric shock injury hazard!

The device may only be installed in a control cabinet (top-hat

rail) when the power is disconnected.

The system must be disconnected for installation.

Assembly / Disassembly The device must be mounted on a top-hat rail (DIN top hat TS35

according to EN60715). The top-hat rail bracket is pre-assembled

on the back of the device. The bracket is hooked into the top-hat

rail from above and fixed to the underside of the bracket with a

clearly perceptible click.

Notice

A sufficient distance (≥ 15 mm) to the other components on the

top-hat rail is recommended for mounting the device in the

control cabinet.

This ensures better heat dissipation, which can have a positive

influence on the service life of the device.

7 of 12

Disassembly is carried out by unlocking the bracket on the

underside and carefully removing it from the top-hat rail.

Notice

Connecting cables should be unplugged during disassembly,

to avoid damage.

Power connection The device is exclusively operated with protective extra low

voltage. The permissible voltage range depends on the

type of device and must be taken from chapter 3 Specifications.

Warning

Electric shock injury hazard and damage to device!

Connecting the device to deviating, excessively high supply

voltages may lead to serious injuries or death.

No supply voltages that deviate from the connection values

specified in the technical data may be used.

The device is supplied with a reverse polarity protected plug that

is already pre

-assembled in the [PWR] socket.

To connect the supply lines, it is recommended to remove the

plug.

The cable cores are connected and screwed according to

the marking [

+24 / GND].

8 of 12

5Configuration

Connection to the device

Web server The device has an integrated web server for configuration. The

web server provides the configuration settings in the form of

websites.

Under factory settings, the web server is accessible at the

following IP address:

IP address 169.254.0.1

Subnet mask 255.255.0.0

Network connection For configuration, the device must be connected to the computer

using a network cable.

The computer’s LAN connection must be configured correctly. To

set the network address manually, define the IP address as

169.254.0.2, for example. The subnet mask must match that of the

device.

Notice

If the device is connected directly to the computer via a

network cable, a connection is usually established via

Automatic Private IP Adressing (APIPA).

The IP address of the computer is then automatically in a

reserved address range of 169.254.x.x and enables a direct

connection to the gateway without manual network

configuration.

9 of 12

Configuration interface

To open the configuration interface, the following address is

entered in a web browser:

http://169.254.0.1 or https://169.254.0.1

Logging on To log in to the web server for the first time, enter the user name

and the preset password.

Universal BACnet Router

User name admin

Password admin

Universal Gateway

User name gw

Password GATEWAY

The password can be changed on the configuration pages (Menu

item GENERAL / USER /…).

Notice



The “REFRESH” symbol must always be used to update the

screen in the web server.

Using the web browser’s standard refresh button will log you

out of the web server.

All changes must be saved by clicking <Save>. Following

changes to the network configuration, it is sometimes

necessary to restart the gateway.

Certain configurations require the device to be restarted. This

is indicated in this manual with <Restart required>. The web

server will show at the upper edge, this button.

10 of 12

Further configuration The configuration of the respective device is explained in the

associated manual. The manual is available online at

www.mbs-solutions.de/dokumentation.

Reset

Hard-Reset With the hardware-reset button, the device can also be reset without

calling up the configuration interface.

Notice

You can find the reset button on the front of the device. The

reset button can only be pushed with a suitable tool.

The following changes are made depending on how long you hold

the button for.

1...5 seconds Restart (Reset-LED will flash red)

up to 10 seconds

The IP address will be set to 169.254.0.1

(default) until the next restart

(reset LED will flash green).

Soft-Reset This reset is carried out via the configuration interface. Details on

this are explained in the device manual.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels MBS Routeur réseau

MBS

MBS DALI Manuel utilisateur

MBS

MBS UBR-02 Mk II Manuel utilisateur

MBS

MBS UBR-01 MK II Manuel utilisateur

MBS

MBS UBR-01 MK II Manuel utilisateur

Manuels Routeur réseau populaires d'autres marques

Allnet

Allnet ALL0333AU Manuel utilisateur

HomeSeer

HomeSeer HT-SEL Manuel utilisateur

Sercomm

Sercomm Genesis OC3505D Manuel utilisateur

Billion

Billion BIPAC 5102 Series Manuel utilisateur

TP-Link

TP-Link TD-8817 Manuel utilisateur

Motorola

Motorola MR1900 Manuel utilisateur

Digi

Digi IX14 Manuel utilisateur

Cisco

Cisco NCS 540 Manuel

XAVi

XAVi X8821e Manuel utilisateur

BEC

BEC 6200WZL Manuel utilisateur

MikroTik

MikroTik hAP ac3 Series Manuel utilisateur

Korenix

Korenix JetNet 5428G Series Manuel utilisateur

NETGEAR

NETGEAR FS526T - Switch Manuel utilisateur

Korenix

Korenix JetNet 5710G Series Manuel utilisateur

Automated Logic

Automated Logic ZN551 Manuel du propriétaire

Cisco

Cisco ASR 1000 Series Manuel de l'opérateur

EnGenius

EnGenius ESR-9710 Manuel utilisateur

Cisco

Cisco 805 Series Instructions d'utilisation et de sécurité