Maxview ANTMINI Manuel utilisateur

Installation Instructions

ANTMINI

UK contact:

Helpline: +44 (0)1553 811000

Email: suppor[email protected]o.uk

Web: www.maxview.co.uk

Maxview reserve the right to change specifications without prior notice

9111454 Iss 1

Mini 5G/4G 2X2 MIMO Antenna

Maxview Address:

Maxview Ltd, Garage Lane, Setchey, King’s Lynn, Norfolk. PE33 0AT. UK

Contents

Product Contents

A. Omni-directional Roof Mount Antenna

and 0.8m cables with SMA connectors

B. Roof Clamp

Installation Instructions

4. Positioning your Antenna

4. Important Antenna Installation Information

5. Fitting the Antenna

Additional Information

7. General Safety Warnings

7. Terms and Conditions

7. Maintenance

8. 2 Year Guarantee

8. Certification and Environment

Introduction

Thank you for purchasing this product, should you have any difficulty using your

Antenna please contact our friendly Customer Helpline on +44 (0)1553 811000 or

email support@maxview.co.uk.

Tools required

- Power Drill

- 2.5mm Drill Bit

- Hack Saw

- File/Emery Paper

- Surface Cleaner- 25mm Hole Saw

- Cross Head Screwdriver

C. No. 6 Screws (spares included)

D. Fixing Template

E. SMA to TS9 Adaptor X 2

Antenna

Type: Omni-directional 2x2 MIMO (multiple in multiple out)

Frequency/Gain: 698-6000 MHz/5.9dBi-8.8dBi. Includes all 3G, 4G and 5G frequencies

Connector Type: 2 x SMA

Impedance: 50 Ohm

Power: Passive

Cable Lengths: 0.8m as standard

Housing: Aluminium Base. UV Stable ASA Cover

Dimensions: H: 67mm x W: 180mm x D: 60mm

Weight: 385g

Specifications

Bracket Fixing Kit - For roof mounting

The raiser bracket allows you the flexibility to

mount your antenna anywhere on your roof and

enter the cable at your preferred point using the

supplied cable entry cover. Alternatively you may

have an existing cable entry point you may like to

utilise instead.

Designed and manufactured specifically for the

Antenna, the aluminium bracket is lightweight,

strong and finished with a durable white or black

powder coating.

Suitable for any flat roof the kit also includes 3m

extension cables for flexible mounting position.

MXL060/KIT White

MXL060/GKIT Black

Roam Extension Cables

Extension cables can be purchased separately to

allow a flexible mounting position to the router.

1 metre MXL050/EXT1

2 metres MXL050/EXT2

Accessories - Sold separately

Weatherproof Socket with SMA Connectors

The Weatherproof Socket provides an external entry

point into the side of any vehicle. Available with 2

SMA connections, making it ideal when using the

Roam Antenna with the Roam Bracket Fixing Kit

(See left) to allow for a temporary connection or

where entry into the roof is not possible.

It can also be used for other applications where an

external SMA connection is required.

B2016

3 metres MXL050/EXT3

5 metres MXL050/EXT5

Thread Extender

Can be used to fit all Roam Antennas to thicker

vehicle roofs. For example American RV’s,

Winterised Motorhomes and Over Landing vehicles.

Thread Extender is ideal for roofs 50 – 90mm thick.

MXL050/TE

Positioning your Antenna

Distance between Router and Antenna

For best performance, we recommend mounting the router in close proximity to the roof mounted

antenna. For best performance, do not use extension cables that are no longer than necessary.

Roof Antenna Position

We recommend leaving 30cm gap from obstacles around the antenna to avoid interference issues

and mounting on a horizontal flat roof.

1. The 3M seal provides a permanent installation.

The adhesive is extremely strong and the antenna is

not designed to be removed. Please ensure you are

completely happy with your antenna’s position and

orientation before installation.

2. The Mini Antenna is designed to be mounted

directly to a horizontal, flat and smooth surface such

as GRP (Glass Reinforced Plastic) with the coaxial

cables passing directly through the roof underneath

the centre of the antenna. The standard installation is

designed for roof thicknesses from 10mm up to 50mm.

Important Antenna Installation Information

10 - 50mm

Fitting the Antenna

1. Once you have a suitable position for the antenna,

cut out the supplied template. Use to mark the 25mm

centre hole position and mark the outside of the

antenna.

2. At the marked centre position, drill a 2.5mm pilot

hole through the roof. Use a 25mm hole saw to drill

out the centre hole through the roof.

Tidy up the hole to remove swarf and sharp edges.

3. Use the Antenna clamp to gauge the depth of the

roof. The best way to do this is to sit the Antenna

clamp upside down through the hole. Then, from the

inside, mark on the clamp where the clamp passes

through the ceiling and into the vehicle.

3A. Please Note. Alternative Nut and Washer option

for thin metal roof applications is supplied. If this is

better suited for your application ignore step 3 & 4.

4. Remove the clamp and cut the clamp shaft to the

correct length. The correct length for your installation

will be the roof depth minus 3mm. This will ensure

the clamp does not bottom out on the antenna when

tightened.

E.g. If roof depth is 30mm. The clamp shaft should be

cut 27mm along the shaft.

B. Roof line

A. Cut line

A B

Front of vehicle

9. The Antenna is now installed and ready to be

connected to a suitable 4G/5G Router.

6Please note:

SMA to TS9 Adaptors (included)

may need fitting depending on

your chosen Router Model.

5. Clean the surface where the antenna will be

installed, ensuring it is free from debris and grease.

6. Pass the cables through the hole and remove the

self-adhesive backing from the 3M seal. Pass the

cables through the roof and position the antenna

making sure it’s facing the front of the vehicle -

Please reference Picture 7 below.

IMPORTANT - Ensure the position of the

antenna is central to your markings,

as once stuck down, the antenna is not

designed to be removed.

7. Press firmly around the edges of the antenna to

ensure a watertight seal has been achieved.

8. From the inside of the vehicle, attach the clamp

and turn clockwise onto the thread protruding from

the bottom of the antenna. Continue to turn until the

clamp is compressing the seal underneath the

antenna. Once in position, use 1 x No.6 Screw to

secure the clamp in position.

Front of vehicle

Please note

white shown

for application

purposes only

8A. If using the Nut and Washer Option (ref page 5)

please tighten and secure using a 27mm Spanner.

Terms and conditions

In no event shall Maxview be liable for any indirect, incidental or consequential damages from the sale or use of

the product. This disclaimer applies both during and after terms of the guarantee. This does not affect your

statutory rights. The antenna is designed for permanent installation and is not designed to be removed or

serviced. Whether the antenna is in warranty or not and whether the cause for removal is our fault or not, we

are not responsible for the safe removal of the antenna. We will not be held responsible or liable for any damage

done to the antenna or other property whilst removing the antenna, regardless of the reason for removal.

General Safety Warnings

Read these instructions carefully and become familiar with your Maxview product. Understand the application,

limitations and any hazards involved with the installation and operation. Failure to follow all instructions may

result in damage to your vehicle and/or serious injury. Maxview declines all responsibility in the event of incident

or accident if they are due to a non observation of the installation instructions or the way the product is used.

No modifications to the product are permissible.

Installation

• Always consider the additional height the product you install adds to the vehicle

• Always follow manufacturer’s operating instructions before using tools and equipment.

• Take care when working at heights. Keep work area clean and tidy to avoid trip hazards

• Use creeper boards where necessary to ensure roof construction can support your weight

• All electrical work should be carried out by a competent person

Operation

• The maximum speed of vehicle with product mounted on roof is 81mph (130km/h)

Servicing & Support

• Any inspection or repair must be carried out by Maxview or an appointed representative of the manufacturer

• No regular maintenance required on the product

• Do not dismantle product

• Do not use solvent or abrasive cleaning agents on the product

• Only use a suitable mild detergent to clean the product

• Do not pressure wash the product

• We recommend you check the mechanical integrity of a roof mounted product at least once a year

• If in the event that you do experience a problem with the product, call Maxview Customer Service

+44 (0)1553 811000

Maintenance

The antenna has been designed to be maintenance and trouble free. For optimum signal strength, keep the

cover clean from dirt, bugs, and other debris. Periodic washing of the top cover with mild soap and water is

recommended.

1. Do not remove the cover of the antenna as it will void the limited guarantee.

2. Never power wash the antenna. Keep the enclosure clean from dirt, bugs, and other debris by hand

washing with mild soap and water.

DO NOT USE SOLVENTS TO CLEAN THE ROAM. DO NOT DROP OR EXPOSE TO JARRING MOVEMENTS.

Every Maxview Antenna is covered by the following 2 year parts limited guarantee from the date of original

purchase.

How do I claim on my guarantee?

In the unlikely event that you have an issue with your product please contact our Customer Services Team on

+44 (0) 1553 811000 or email support@maxview.co.uk. You will need to retain your proof of purchase.

In no event shall Maxview be liable for any indirect, incidental or consequential damages from the sale or use

of the product. This disclaimer applies both during and after terms of the guarantee. This does not affect your

statutory rights.

Due to expanding and changing telecommunications market, Maxview cannot be held responsible for changes

made to communication services. Software updates to address such issues are not covered under guarantee.

Terms and Conditions of the Guarantee

a) Your guarantee starts from the date you purchased your item. Your guarantee will be valid from date of

manufacture if you are unable to provide a proof of purchase.

b) A guarantee authorisation must be obtained from Maxview prior to work commencing.

c) Maxview is responsible for the cost of a replacement part if the original part is determined to be defective

under the terms of the guarantee.

d) Any replacement parts required will be supplied, by return, on receipt of the faulty part.

e) Any work requiring replacement parts will only be sanctioned on receipt of proof of the broken part.

The customer is responsible for the cost of replacement parts after the guarantee period has expired.

f) Our guarantee is “Back To Base.” No travelling costs will be paid.

g) Parts that suffer breakdown and/or failure due to flooding/water ingress or abrasive cleaning caused by

solutions and/or Pressure Washers are not covered under our guarantee.

h) Our guarantee does not cover installation or external wiring.

This guarantee also does not apply where:

• The product has been abused, misused, improperly installed or improperly maintained.

• The product has been installed without the use of a Maxview mounting bracket designed for the product.

• Repairs have been made or attempted by others that are not certified by Maxview to do such repairs.

• Repairs are required because of normal wear and tear.

• Alterations have been made to the product.

• The antenna unit has been opened without authorisation.

• Damage has been caused by power washing.

• Circumstances beyond the control of Maxview cause the product to no longer operate correctly.

• Customer is not the original owner.

2 year guarantee

Certification and Environment

The Antenna has been designed, constructed and marketed in compliance with

the safety and product requirements of the relevant EEC Directives.

Products marked with the crossed out wheely bin must not be disposed of with normal household

waste but made available for separate household collection. Separate collection of used products

and their packaging allows materials to be recycled and used again. Re use of recycled materials

helps prevent environmental pollution and reduces the demand for raw materials.

UK Conformity Assessed (UKCA) marking is a certification mark that indicates conformity with

the applicable requirements for products sold within Great Britain.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Maxview Antenne

Maxview

Maxview COMBO/51 Instructions de montage

Maxview

Maxview Precision Waterways MXL024/55 Manuel

Maxview

Maxview Target MXL017/65 Manuel

Maxview

Maxview gazelle pro B2414 Manuel utilisateur

Maxview

Maxview Precision I.D MXL019/55 Manuel utilisateur

Maxview

Maxview TARGET MXL017/65Q Manuel utilisateur

Maxview

Maxview Omnimax Instructions de montage

Maxview

Maxview MXL028/65 Connect Manuel du propriétaire

Maxview

Maxview MXL003/65 Manuel utilisateur

Maxview

Maxview MXL003/50 Manuel

Maxview

Maxview MNISAT MXL001 Instructions de montage

Maxview

Maxview MXL050 Roam Instructions de montage

Maxview

Maxview Precision MXL012/55NZ Manuel utilisateur

Maxview

Maxview ANT2 Manuel utilisateur

Maxview

Maxview MXL012/75TWINAU Manuel utilisateur

Maxview

Maxview COMBO/50 Instructions de montage

Maxview

Maxview CONNECT MXL028/65Q Manuel du propriétaire

Maxview

Maxview MXR0024 Manuel utilisateur

Maxview

Maxview MXL041 Manuel utilisateur

Maxview

Maxview CRANK UP B2590/50SNZ Manuel

Maxview

Maxview MXR0052 Manuel utilisateur

Maxview

Maxview GAZELLE Fiche d'information produit

Maxview

Maxview 5G/4G 4X4 MIMO Manuel utilisateur

Maxview

Maxview Target Sky QMXL017/85Q Manuel

Manuels Antenne populaires d'autres marques

Alfa Network

Alfa Network APA-L01 Manuel utilisateur

Naval

Naval PR-422CA Manuel utilisateur

Feig Electronic

Feig Electronic ID ISC.ANTH200/200 Series Manuel utilisateur

TERK Technologies

TERK Technologies TV44 Manuel utilisateur

Directive Systems & Engineering

Directive Systems & Engineering DSE2324LYRMK Manuel utilisateur

HP J8999A Manuel utilisateur

MobilSat

MobilSat MSP-S Manuel utilisateur

Steren

Steren ANT-UHF 13 Manuel utilisateur

Novatel

Novatel 600-G Manuel d'utilisation

Radio Shack

Radio Shack Amplified VHF/UHF/FM Indoor Antenna Manuel utilisateur

TRENDnet

TRENDnet TEW-AO12O Manuel utilisateur

Radio Shack

Radio Shack 15-1837 Manuel utilisateur

CommScope

CommScope CMAX-OMFX-43M-I53 Manuel utilisateur

Ramsey Electronics

Ramsey Electronics DAP25 Manuel utilisateur

COBHAM

COBHAM SAILOR 800 VSAT Manuel d'utilisation et d'entretien

Trango Systems

Trango Systems AD900-9 Manuel utilisateur

Steren

Steren ANT-100 Manuel utilisateur

Proxim

Proxim 5054-PA-23 Manuel utilisateur