MAXPhotonics MFS Series Manuel utilisateur

MFS Series - M BOX

Maxphotonics Co.,Ltd.

rights reserved. You may not copy, modify, transmit or publish this publication,

in any form, in any media or by any means, without the prior written permission

of Maxphotonics, except as allowed under applicable copyright laws. Permitted

copies shall bear the same copyright and proprietary notices that were contained

on the ori ginal version.

Maxphotonics believes that the information provided is accurate and reliable;

however Maxphotonics makes no warranty, representation,expression or

implication that this document can be used as reference in other occasions.

Furthermore, Maxphotonics does not assume responsibility for any infringement

of patents or other rights of third parties due to use of the information contained

in this document. Maxphotonics shall not be liable for errors contained in this

document or for direct or indirect damages of relevant equipment.

Maxphotonics and the Maxphotonics Logo are registered trademarks of

Maxphotonics Co., Ltd., and the Logo does not break any regulations of

Trademark law.Maxphotonics grants no rights for patent or other intellectual

property mentioned herein.

All information contained in this document is subject to change and revision

without notice.

Subject to change without notice.

Maxphotonics Co.,Ltd.

Address: Maxphotonics Industrial Park, 3rd Furong Road,

Furong Industrial Area, Shajing, Baoan, Shenzhen, China.518125

E-Mail: [email protected]

http://en.maxphotonics.com

Preface

Thank you for using the MFS Series pulsed fiber laser products. We compile

this document for you in order that the laser is used and maintained properly.

Due to the limited level of the writers, coupled with time constraints, there are

some careless mistakes in this document,and your understanding will be much

appreciated. Thank you again for using Maxphotonics' products.

Please take time to read and understand this User’s Guide and familiarize

yourself with the operating and maintenance instructions before you use the

product. We recommend that the operator read the Section titled “Safety

Information” prior to operating the product.

This User’s Guide should stay with the product to provide you and all future

users and owners of the product with important operating, safety and other

information.

We identify the parts to which you need to pay special attention in the document

with underscore. Please notice those information to prevent the unnecessary

damages.

Company Prole

Found in 2004, Maxphotonics is one of the first fiber laser manufacturers in

China. It is also the first in China to realize independent intellectual property

rights and vertical integration in the core technologies of ber lasers and optical

devices. One of the national high-tech enterprises. Maxphotonics has developed

into an internationally renowned laser manufacturer that develops, manufactures

and sells fiber lasers and core optical components. It is the second largest

domestic ber laser manufacturer in the domestic market.

Maxphotonics specializes in the research, development, production and

sales of ber lasers, including pulsed ber lasers, continuous ber lasers and

direct semiconductor lasers. It also implements pump sources, combiners,

fiber gratings, isolators, laser output heads, and stripping. Optical devices

such as molds, acousto-optic modulators, and pattern matchers are produced

autonomously. Products are widely used in marking, engraving, cutting,

drilling, cladding, welding, surface treatment, rapid prototyping and additive

manufacturing processes.

More informations，please visit our website：

http://en.maxphotonics.com

CONTENT

Chapter 1 Characteristic Description …………………………………… 5

Chapter 2 General Safety Information …………………………………… 6

1-Safety Conventions …………………………………………………………… 6

2-Laser Protection ……………………………………………………………… 7

3-General Safety Instructions ………………………………………………… 8

4-Additional Safety Information ……………………………………………… 11

Chapter 3 Product Description ……………………………………………… 12

1-Features………………………………………………………………………… 12

2-Laser Model Designation Codes …………………………………………… 12

3-Certication …………………………………………………………………… 13

Chapter 4 Specication ……………………………………………………… 14

1-Characteristic Parameters …………………………………………………… 14

2-Computer Conguration ……………………………………………………… 15

3-Structural Layout ……………………………………………………………… 16

4CONTENT

Chapter 5 Using Instruction ………………………………………………… 17

1-Interface function description ……………………………………………… 17

2-DB 26 Pins Interface Denition ……………………………………………… 18

3-Button Function Description ………………………………………………… 23

4-Software operating manual ………………………………………………… 23

Chapter 6 Service and Maintenance ……………………………………… 24

1-Maintenance Notes …………………………………………………………… 24

2-Service Statements …………………………………………………………… 25

Chapter 7 Warranty Statements …………………………………………… 26

1-General Clauses ……………………………………………………………… 26

2-Warranty Limitations ………………………………………………………… 26

MFS Series is one of the Maxphotonics outstanding products. Its appearance

has revolutionary significance for the integration of high-speed and high-

resolution laser marking system.

Compact, stand-alone, easy-to-use design that can be integrated directly into

the user's device. Low power consumption, practical and durable design for

laboratory and market applications.

Laser light exhibits unique characteristics that may pose safety hazards.

Therefore, the laser light can’t be normally associated with other light sources,

and all operators and people near the laser must be aware of these special

hazards.

In order to ensure the safe operation and optimal performance of the product,

please follow all warnings and safety instructions in this guide during process of

operation, maintenance and service.

For ensuring the safety of operators, operators are urged not to open the

equipment privately at all times. There are no user serviceable parts, equipment

or assemblies associated with this product. Lasers of unauthorized disassembly

shall not be subject to warranty.

Chapter 1

Characteristic Description

Chapter 2

General Safety Information

1-Safety Conventions

All safety warning symbols during operating process of the laser include:

SYMBOLS DESCRIPTION

WARNING: Refers to a potential Electrical Hazard to

human body. It requires a procedure that, if not correctly

followed, may result in bodily harm to you and/or others.

Do not proceed beyond the WARNING sign until you

completely understand and meet the required conditions.

CAUTION：Refers to a potential hazard on product. It

requires a procedure that, if not correctly followed, may

result in damage to the product or components. In order

to ensure normal use of equipment, do not violate the

requirement of the CAUTION sign.

WARNING:Refers to a potential Laser Hazard.The symbol

represents laser radiation. The symbol is pasted on laser

output end.

NO SYMBOL

IMPORTANT：Refers to any information regarding the

operation of the product. Please do not overlook this

information.

Chapter 2 General Safety Information

NOTE :

◎ This device is classified as a high power Class IV laser instrument. It

may emit up to 20W average power near 1060nm wavelength. This level

of light may cause damage to the eye and skin. Despite the radiation

being invisible, the beam may cause irreversible damage to the retina.

Laser safety eyewear is not provided with this instrument, but must be

worn at all times while the laser is operational. Use appropriate laser safety

eyewear when operating this device. The manufacturer of the laser system

is responsible for the safety compliance according to the applicable

standards and regulations.

2-Laser Protection

1.Laser Protection Requirements

You must wear the safety protective glasses while operating the laser, and

rationally select the safety protective glasses according to the lasing wavelength

of the laser. If the device is a tunable laser or Raman product, it emits light

over a range of wavelengths and the end user should conrm the laser safety

eyewear used protects against light emitted by the device over its entire range

of wavelength.

2.Laser Protective Equipment Suppliers

Maxphotonics recommends material or equipments provided by following laser

protective equipment suppliers for you, including LaserVision USA, Kentek

Corporation, Rochwell Laser Industries, etc. All the supplier information is

provided by Maxphotonics only for the convenience to use, so Maxphotonics

assumes no responsibility for any problem caused by using the products of

abovementioned suppliers.

8Chapter 2 General Safety Information

3-General Safety Instructions

In order to ensure the safe operation and optimal performance of the

product, please follow these warning and cautions in additionto the other

contained elsewhere in this document.

1.Specular Reflection

There are often numerous secondary laser beams produced at various angles

in the output port of the laser. These divergent beams are produced when the

primary beam of laser reects off a smooth surface, and they are called specular

reflections. Although these secondary beams may be less powerful than the

total power emitted from the primary beam, the intensity may be great enough to

cause damage to the eyes and skin as well as surface of materials.

WARNING:

◎You must exercise caution to avoid/minimize specular reflections as these

laser radiations are invisible!

2.Safety Instructions of Accessories

WARNING :

◎This device has an output optical head connected to the laser with a fiber

cable. Please, be careful dealing with the output head.

3.Optical Operating Instructions

We strongly recommend that you read the following procedures before operating

the laser:

1.Never look directly into the laser output port when the power is turned on.

2.Avoid positioning the laser and all optical output components at eye level.

3.Ensure that all personal protective equipment is suitable for the output power

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels MAXPhotonics Imprimante

MAXPhotonics

MAXPhotonics E1-10W Manuel utilisateur

Manuels Imprimante populaires d'autres marques

Lexmark

Lexmark 1400 Series Manuel

Canon

Canon i70 Series Manuel utilisateur

Evolis

Evolis Elypso Manuel utilisateur

Kyocera

Kyocera FS-9530DN Manuel utilisateur

Canon

Canon LASER SHOT LBP-1210 Manuel utilisateur

Samsung

Samsung BIXOLON SRP-350plusF Manuel utilisateur

Canon

Canon PIXMA PRO-1 Series Manuel utilisateur

Canon

Canon PIXMA G3560 Guide de configuration

Dell

Dell Color Laser Printer 2130cn Manuel utilisateur

Tektronix

Tektronix Phaser 840 Manuel utilisateur

Epson

Epson ET-7750 Mode d'emploi

Canon

Canon CLBR 460ps Manuel utilisateur

Eltron

Eltron P210 Guide Manuel utilisateur

Ricoh

Ricoh MD-P1 Manuel utilisateur

Epson

Epson SC-F7100 series Manuel utilisateur

Epson

Epson Stylus C40UX Manuel utilisateur

Canon

Canon imagePASS-A2 Manuel utilisateur

Canon

Canon S820D Manuel utilisateur