MAXPhotonics MFP-100W Manuel utilisateur
Maxphotonics Co.,Ltd.
MFP-100W/200W Laser Cleaning Machine
Copyright Notation
Copyright © Maxphotonics Co., Ltd (hereafter referred to as
Maxphotonics). All rights reserved. You may not copy, modify, transmit or
publish this publication, in any form, in any media or by any means, without
the prior written permission of Maxphotonics, except as allowed under
applicable copyright laws. Permitted copies shall bear the same copyright
and proprietary notices that were contained on the original version.
Maxphotonics believes that the information provided is accurate
and reliable; however Maxphotonics makes no warranty, representation,
expression or implication that this document can be used as reference
in other occasions. Furthermore, Maxphotonics does not assume
responsibility for any infringement of patents or other rights of third parties
due to use of the information contained in this document. Maxphotonics
shall not be liable for errors contained in this document or for direct or
indirect damages of relevant equipment.
Maxphotonics and the Maxphotonics Logo are registered trademarks
of Maxphotonics Co., Ltd., and the Logo does not break any regulations
of Trademark law.Maxphotonics grants no rights for patent or other
intellectual property mentioned herein.
All information contained in this document is subject to change and
revision without notice.
Subject to change without notice.
Maxphotonics Co.,Ltd.
Address: Maxphotonics Industrial Park, 3rd Furong Road,
Furong Industrial Area, Shajing, Baoan, Shenzhen, China.518125
E-Mail: [email protected]
http://en.maxphotonics.com
Preface
Thank you for using the Laser Cleaning Machine from Maxphotonics.
We compile this document for you in order that the laser cleaning
machine is used and maintained properly. Due to the limited level of the
writers, coupled with time constraints, there are some careless mistakes
in this document, your understanding and suggestion to help us make
an improvement will be much appreciated . Thank you again for using
Maxphotonics' products.
Please take time to read and understand this User's Guide and
familiarize yourself with the operating and maintenance instructions before
you use the product. We strongly recommend that the operator read the
Section 2 titled “Safety Information” prior to operating the product.
This User's Guide should stay with the product to provide you and all
future users and owners of the product with important operating, safety
and other information.
We identify the parts to which you need to pay special attention in the
document with underscore. Please notice those information to prevent the
unnecessary damages.
2 3
Company Profile
As a large laser manufacturer founded in 2004, Maxphotonics
Co., Ltd. specializes in research and development, production and
sales of lasers and ancillary products. Maxphotonics owns a number of
independent intellectual property rights and patents as well as high-power
pulsed fiber laser, high-power fiber laser and high-power fiber amplifier
etc.
So far, with intellectual property rights and patents, Maxphotonics
owns industrial pulsed fiber laser series, CW fiber laser series,QCW
laser series,fiber laser for scientific researches, tunable fiber laser, fiber
amplifier, ASE light source, etc. Those products are widely applied to fields
of laser marking, 3D print，DTS system and scientific research.
Maxphotonics offers laser, relevant solution and ancillary facility to
domestic and foreign customers. We adhere to the enterprise mission
statement of ''Maxphotonics leads the industry'', take customer satisfaction
as the start point, completely implement ISO9001 quality management
system, introduce ERP information management system and provide all-
round pre-sales and after-sales service for customers.
Relying on excellent ability of product design and development, we
carry out all-round exchanges and cooperation with international famous
laser companies and various research institutions of China, continuously
increase the investment of science research, constantly update
diversification of production types, lead the trend of the industry and create
maximum value for customers, so as to strive perseveringly for the world-
class laser manufactures and forge ahead.
More informations，please visit our website：
http://en.maxphotonics.com
Contents
2 3
Company Profile ……………………………………………………………… 2
Chapter 1 Product Description ………………………………………… 5
Chapter 2 General Safety Information ……………………………… 6
1-Laser Safety Class ………………………………………………………… 6
2-Electrical Safety …………………………………………………………… 6
3-Safety Conversions ………………………………………………………… 7
4-Laser Protection …………………………………………………………… 8
5-Reference Standard ……………………………………………………… 8
6-General Safety Instructions ……………………………………………… 10
7-Additional Safety Information …………………………………………… 14
Chapter 3 Product Description ………………………………………… 16
1-Standard Data of Non-handheld Eraser ……………………………… 16
2-General Characteristic Parameters …………………………………… 17
3-Structural Layout …………………………………………………………… 18
Chapter 4 Operating Steps ……………………………………………… 19
4 5
Contents
4 5
1-Power Supply ……………………………………………………………… 19
2-Startup Steps ………………………………………………………………… 20
3-Control board setting parameters ……………………………………… 20
4-Turn On the Ted Light for Preview ……………………………………… 21
5-Cleaning Operation ………………………………………………………… 22
6-Applications ………………………………………………………………… 23
Chapter 5 Service and Maintenance ………………………………… 28
1-Maintenance Notes ………………………………………………………… 28
2-Service Statements ………………………………………………………… 29
Chapter 6 Warranty Statements………………………………………… 30
1-General Items ……………………………………………………………… 30
2-Warranty Limitations ……………………………………………………… 30
4 54 5
The new generation Laser Cleaning Machine is a high technology
product from Maxphotonics for non- contact laser cleaning. It can remove
the grease, dirt, coating, paint, rust, residue, oxide layer, and other target
materials with high efficiency, high performance, low cost and without harm
to the base material. It can meet the cleaning requirements of complex
modeling and fine positioning in the industrial processing field, achieving a
cleaner cleaning effect and a lower overall production cost.
It is widely used in industrial area, such as automotive, mechanical,
food processing, electronics, historic conservation, ship-building and
power generation, etc.
Chapter 1
Product Description
6 76 7
Chapter 2
General Safety Information
1-Laser Safety Class
This device is built-in MFP-100/200 laser generatorwhich is
classified as a high power Class IV laser instrument. It may emit 1064nm
wavelength, peak powerup to 15kW ,and the average power is above
100W . This level of light may cause damage to the eye and skin. Despite
the radiation being invisible, the beam may cause irreversible damage to
the retina. Laser safety eyewear is not provided with this instrument, but
must be worn at all times while the laser is operational. Use appropriate
laser safety eyewear when operating this device.
2-Electrical Safety
1、Any interruption of the protective ground conductor from the earth
terminal can result in personal injury;
laser safety eyewear or glasses must be worn
Chapter 2 General Safety Information
6 76 7
2、Make sure the instrument is properly grounded through a protective
conductor of the AC power cable, or else some fault may be caused
including laser alarm, light malfunction or unsteady working.
3、Do not work in a high moisture/high temperature environment, or
else short circuit or alarm of high moisture/high temperature will be caused
and the normal service life of the Laser Eraser will be shortened.
3-Safety Conversions
All safety warning symbols during operating process of the device
include:
Symbols Description
WARNING:
Refers to a potential Electrical Hazard to human
body; It requires a procedure that, if not correctly
followed, may result in bodily harm to you and/
or others. Do not proceed beyond the WARNING
sign until you completely understand and meet the
required conditions.
CAUTION：
Refers to a potential hazard on product. It requires
a procedure that, if not correctly followed, may
result in damage to the product or components. In
order to ensure normal use of equipment, do not
violate the requirement of the CAUTION sign.
WARNING:
Refers to a potential Laser Hazard.
The symbol represents laser radiation. The
symbol is pasted on laser output end.
NO SYMBOL
IMPORTANT：
Refers to any information regarding the operation
of the product. Please do not overlook this
information.
Chapter 2 General Safety Information
8 9
NOTE:
This Laser Cleaning Machine can emit the wavelengths ranged
from 1060nm to 1100nm. Despite the radiation being invisible, the beam
may cause irreversible damage to the retina. We suggest that you use
appropriate laser safety eyewear when operating this device.
4-Laser Protection
1、Laser Protection Requirements
You must wear the safety protective glasses while operating the
Laser Cleaning Machine, and rationally select the safety protective
glasses according to the lasing wavelength of the laser. If the device is a
tunable laser or Raman product, it emits light over a range of wavelengths
and the end user should confirm the laser safety eyewear used protects
against light emitted by the device over its entire range of wavelength.
2、Laser Protective Equipment Suppliers
Maxphotonics recommends material or equipments provided
by following laser protective equipment suppliers for you, including
LaserVision USA, Kentek Corporation, Rochwell Laser Industries, etc.
All the supplier information is provided by Maxphotonics only for the
convenience to use, so Maxphotonics assumes no responsibility for any
problem caused by using the products of abovementioned suppliers.
5-Reference Standard
Electromagnetic Compatibility Emission:
EN 55011：5009+A1：2010
CISPR 11：5009+A1：2010
FCC Class A
Autres manuels pour MFP-100W
1
Ce manuel convient aux modèles suivants
1
Table des matières
