Maxell MP-WU8801W Manuel utilisateur

ENGLISH

LCD Projector

MP-WU8801W/MP-WU8801B

MP-WU8701W/MP-WU8701B

User's Manual (concise)

Thank you for purchasing this product.

This product is supplied without a lens unit. You can select some optional lense

units to meet your requirements.

This is the basic manual on the product. Visit our website to get the detailed

manuals (Safety Guide, Operating Guide, Network Guide, Instant

Stack Guide) and the latest information on the product.

Check them before using the product, for safe use and utilization of the product.

For our website, see the attached sheet.

WARNING

ŹBefore using this product be sure to read all manuals for this product. After

reading them, store them in a safe place for future reference.

ŹHeed all the warnings and cautions in the manuals or on the product.

ŹFollow all the instructions in the manuals or on the product.

NOTE •

In this manual, unless any comments are accompanied, “the manuals” means

all the documents provided with this product, and “the product” means this projector and

all the accessories came with the projector.

Contents



 

First of all ...........................................2

Graphical symbols explanation .......2

Important safety instructions ...........2

Electro-magnetic interference .........4

Laser precautions ............................5

Disposal of old equipment and

batteries only for European Union

and countries

with recycling systems ...................7

Contents of package..........................8

About the lens unit .............................8

Preparing for the remote control ........9

Arrangement ....................................10

Connecting with your devices ..........12

Connecting to a power supply .........13

Turning on the power .......................14

Adjusting the projector's elevator ....15

Adjusting the lens position ...............15

Displaying the picture ......................16

7XUQLQJRႇWKHSRZHU .......................17

Cleaning and replacing

WKHDLU¿OWHU .....................................18

Inserting or replacing

the internal clock battery ...............20

6SHFL¿FDWLRQV ..................................21

End user license agreement

for the product software ................23

Troubleshooting -

Warranty and after-service ..........24

First of all

Graphical symbols explanation

The following entries and graphical symbols are used for the manuals and the

product as follows, for safety purpose. Know their meanings beforehand and heed

them.

WARNING

This entry warns of a risk of serious personal injury or even death.

CAUTION This entry warns of a risk of personal injury or physical damage.

NOTICE This entry notices of fear of causing trouble.

WARNING/

CAUTION

High

pressure High voltage High

temperature

Do not shade the light Projector not for consumer use

Laser warning

RG2

RG2 caution Kensington lock

Alternating

current

Standby

(Power) On (Power) Video input

switching

Important safety instructions

The followings are important instructions for safely using this product. Be sure to

follow them always when handling the product. The manufacturer assumes no

responsibility for any damage caused by mishandling that is beyond normal usage

GH¿QHGLQWKHVHPDQXDOVRIWKLs projector.

WARNING

Ź1HYHUXVHWKHSURGXFWLQRUDIWHUDQDEQRUPDOLW\IRUH[DPSOHJLYLQJRႇ

VPRNHVPHOOLQJVWUDQJH¿QGLQJDIRUHLJQREMHFWLQVLGHEURNHQDQGVRRQ

If an abnormality should occur, unplug the projector urgently.

ŹSituate the product away from children and pets.

ŹKeep small parts away from children and pets. If swallowed, consult a

physician immediately for emergency treatment.

Ź'RQRWXVHWKHSURGXFWGXULQJHOHFWULFDOVWRUPV

ŹUnplug the projector from the power outlet if the projector is not being used.

ŹDo not open or remove any portion of the product, unless the manuals direct

it. For internal maintenance, leave it to your dealer or their service personnel.

(continued on next page)

ENGLISH

Important safety instructions (continued)

WARNING

Ź8VHRQO\WKHDFFHVVRULHVVSHFL¿HGRUUHFRPPHQGHGE\WKHPDQXIDFWXUHU

ŹDo not modify the projector or accessories.

ŹDo not let any things or any liquids enter to the inside of the product.

ŹDo not get the product wet.

Ź'RQRWSODFHWKHSURMHFWRUZKHUHDQ\RLOVVXFKDVFRRNLQJRUPDFKLQHRLO

are used. Oil may harm the product, resulting in malfunction, or falling from the

mounted position. Do not use adhesive such as threadlocker, lubricant and so

on.

ŹDo not apply a shock or pressure to this product.

- Do not place the product on an unstable place such as the uneven surface

or the leaned table.

- Ensure the product is stable. Place the projector so that it does not protrude

from the surface where the projector is placed on.

- Remove all the attachments including the power cord and cables, from the

projector when carrying the projector.

ŹDo not look into the lens and the openings on the projector while the light

source is on, since the projection ray may cause a trouble on your eyes.

Do not approach the exhaust vents, while the light source is on. Also after the

light source goes out, do not approach them for a while, since too hot.

Electro-magnetic interference

This is a Class A product. In a domestic environment, this product may cause

radio interference in which case the user may be required to take adequate

measures.

This product may cause interference if used in residential areas. Such use must

be avoided unless the user takes special measures to reduce electromagnetic

emissions to prevent interference to the reception of radio and television

broadcasts.

In Canada

CAN ICES-3(A) / NMB-3(A).

In the US and places where the FCC regulations are applicable

This device complies with part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that

may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class A

digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a residential

area is likely to cause harmful interference in which case the user is required to

correct the interference at his own expense.

INSTRUCTIONS TO USERS: Some cables have to be used with the core set.

Use the accessory cable or a designated type cable for the connection. For cables

that have a core only at one end, connect the core to the projector.

CAUTION:&KDQJHVRUPRGL¿FDWLRQVQRWH[SUHVVO\DSSURYHGE\WKHSDUW\

responsible for compliance could void the user’s authority to operate the

equipment.

ENGLISH

Laser precautions

“No direct exposure to the beam shall be permitted”

As with any bright source, do not stare into the direct beam,

RG2 IEC 62471-5:2015.

Hazard distance

Refer to the table T-1 in Supplement (at the back of this manual). The table

shows the hazard distance in which the beam strength described in IEC 62471 - 5

(Photobiological safety of lamps and lamp systems – Part 5: Image projectors) is

categorized as RG3.

For the combination of the lens and projector for which a value is shown in the

table, when the projection distance is the value or shorter the beam strength is

categorized as RG3, and is a hazard.

When applying the combination shown in the table, “operators shall control

access to the beam within the hazard distance or install the product at the height

that will prevent exposures of spectators’ eyes within the hazard distance”.

Refer to the F-8 in Supplement (at the back of this manual).

Laser aperture and Laser caution label

The positions of the laser aperture ( ) and the laser caution label are shown in

¿JXUH.

Laser evaluation standard

IEC60825-1: 2007, IEC60825-1: 2014, EN60825-1: 2014

,QWHUQDO/DVHU6SHFL¿FDWLRQV

This product is equipped with 2 Laser Diodes.

1. MP-WU8801W/MP-WU8801B

Internal Laser 1 : 71W, Wave Length: 449 - 461nm

Internal Laser 2 : 95W, Wave Length: 449 - 461nm

2. MP-WU8701W/MP-WU8701B

Internal Laser 1 : 71W, Wave Length: 449 - 461nm

Internal Laser 2 : 71W, Wave Length: 449 - 461nm

LASER ENERGY - EXPOSURE NEAR APERTURE MAY CAUSE BURNS

(continued on next page)

Laser aperture

7KLVSURMHFWRULVFODVVL¿HGDVDFODVVODVHUSURGXFWWKDWFRPSOLHVZLWK

IEC60825-1:2014 and JIS C 6802:2014, and as a class 3R laser product that

complies with IEC60825-1:2007.

Improper handling may cause injury. Be careful of the following.

,IDQDEQRUPDOLW\RFFXUVLQWKHSURMHFWRUWXUQLWRႇLPPHGLDWHO\XQSOXJWKH

power cord from the outlet, and consult your dealer or service company. If you

FRQWLQXHWRXVHLWLWPD\FDXVHQRWRQO\HOHFWULFVKRFNRU¿UHEXWDOVRYLVLRQ

disorder.

• Do not disassemble or modify the projector. The projector has a high-power

laser device inside. It may cause serious injury.

• Do not look into the beam while projecting an image. Do not look into the lens

WKURXJKRSWLFDOGHYLFHVVXFKDVPDJQL¿HUVRUWHOHVFRSHV,WPD\FDXVHYLVLRQ

disorder.

• Make sure that nobody is looking into the lens when you turn on the projector

by remote control away from the projector.

• Do not let children operate the projector. If children could possibly operate the

projector, they must be accompanied by an adult.

'RQRWH[SRVHRSWLFDOGHYLFHVVXFKDVPDJQL¿HUVRUUHÀHFWLRQPLUURUVWRD

SURMHFWHGLPDJH,WPD\FDXVHEDGHႇHFWVRQWKHKXPDQERG\LI\RXFRQWLQXH

WRXVHLW,WPD\DOVRFDXVH¿UHRUDFFLGHQWV

• Do not disassemble the projector when you dispose of it. Dispose of it

according to laws and regulations of each country or region.

CAUTION

Ź8VHRIFRQWUROVRUDGMXVWPHQWVRUSHUIRUPDQFHRISURFHGXUHVRWKHUWKDQWKRVH

VSHFL¿HGKHUHLQPD\UHVXOWLQKD]DUGRXVUDGLDWLRQH[SRVXUH

Laser precautions (continued)

ENGLISH

Disposal of old equipment and batteries

only for European Union and countries

with recycling systems

The above mark is in compliance with the Waste Electrical and

Electronic Equipment Directive 2012/19/EU (WEEE). The mark indicates the

requirement NOT to dispose the equipment including any spent or discarded

batteries as unsorted municipal waste, but use the return and collection systems

available. If the batteries or accumulators included with this equipment display the

chemical symbol Hg, Cd, or Pb, then it means that the battery has a heavy metal

content of more than 0.0005% Mercury, or more than 0.002% Cadmium or more

than, 0.004% Lead.

Note for the battery symbol (bottom symbol): This symbol

might be used in combination with a chemical symbol. In this case it

complies with the requirement set by the Directive for the chemical

involved.

Contents of package

Your projector should come with the items shown below. Check that all the items

are included. Contact your dealer immediately if any items are missing.

(1) Remote control with two AA batteries

(2) Power cord

(3) Computer cable

(4) Cable tie

for power cord (x1)

for HDMITM cable (x3)

(5) Terminal cover

2 types

(6) Lens hole cover

(7) User’s manual

* This is the basic manual on the product.

Visit our website to get the detailed manuals

and the latest information on the product.

(8) Security label

WARNING

Ź

Keep small parts away from children and pets. Take care not to put in the

mouth. If swallowed, consult a physician immediately for emergency treatment.

NOTE • Keep the original packing materials for future reshipment. Be sure to use the

original packing materials when moving the projector. Remove the lens unit and attach

the lens hole cover when moving the projector.

• This product does not include batteries for the internal clock. (20)

About the lens unit

This product is supplied without a lens unit. You can select some of the optional

lens units to meet your requirements.

It is necessary to install the lens unit to operate this product. Prepare one or more

lens units together with this product.

For more information, consult your dealer.

(2)

(3)

(1)

(6)

(7)

(8)

(4)

(5)

INFO

NETWORK

INTERACTIVE

ENGLISH

Preparing for the remote control

Insert the batteries into the remote control before using it.

Use the appropriate AA carbon-zinc or alkaline batteries (non-rechargeable) in

accordance with laws and regulations.

If the remote control starts to malfunction, try to replace the batteries. If you will

not use the remote control for long period, remove the batteries from the remote

control and store them in a safe place.

Remove the battery cover.

Align and insert the two AA batteries according to their plus

and minus terminals as indicated in the remote control.

Put the battery cover back to the former state.

WARNING

ŹAlways handle the batteries with care and use them only as directed.

Improper use may result in battery explosion, cracking or leakage, which could

UHVXOWLQ¿UHLQMXU\DQGRUSROOXWLRQRIWKHVXUURXQGLQJHQYLURQPHQW

- When replacing the batteries, replace both of the batteries with new batteries

of the same type. Do not use a new battery with a used battery.

%HVXUHWRXVHRQO\WKHEDWWHULHVVSHFL¿HG'RQRWXVHEDWWHULHVRIGLႇHUHQW

types at the same time. Do not mix a new battery with used one.

Make sure the plus and minus terminals are correctly aligned when loading a

battery.

- Keep a battery away from children and pets.

- Do not recharge, short circuit, solder or disassemble a battery.

'RQRWSODFHDEDWWHU\LQ¿UHRUZDWHU.HHSEDWWHULHVLQDGDUNFRRODQGGU\SODFH

If you observe battery leakage, wipe out the leakage and then replace a

battery. If the leakage adheres to your body or clothes, rinse well with water

immediately.

- Obey the local laws on disposing the battery.

Arrangement

Refer to the table T-2 in Supplement (at the back of this manual) to determine the

screen size and projection distance. The values shown in the table are

calculated for a full size screen.

7KLVSURMHFWRUZLOOSHUIRUPLQDIUHHWLOWDQJOHDVVKRZQLQWKH¿JXUHVEHORZ

Tilt 360°

Horizontal 360° Vertical 360° (combination of

horizontal and vertical)

Secure a clearance of 30 cm or greater between the intake

vents of the projector and other objects such as walls.

There are intake vents on the left and right sides.

Secure a clearance of 50 cm or greater between the exhaust

vents of the projector and other objects such as walls.

There are exhaust vents on the back side.

When installing the projectors side by side, secure a

clearance of 50 cm or greater between both projectors.

Assume that there is enough clearance in the front

and top of the projector.

These also apply to the portrait mode

installation.

50 cm or greater

30 cm or greater

Intake vents

30 cm or greater

50 cm or greater

Exhaust vents

(continued on next page)

Autres manuels pour MP-WU8801W

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Maxell Projecteur

Maxell

Maxell MC-EX353E Manuel utilisateur

Maxell

Maxell MP-EU5002 Manuel utilisateur

Maxell

Maxell MP-TW4011 Manuel utilisateur

Maxell

Maxell MC-EX3551 Manuel utilisateur

Maxell

Maxell MC-WU5506M Manuel utilisateur

Maxell

Maxell MC-WU8701W Manuel utilisateur

Maxell

Maxell MP-AW3001 Manuel utilisateur

Maxell

Maxell MP-TW3001 Manuel utilisateur

Maxell

Maxell MP-WU8801W Document technique

Maxell

Maxell MP-WU8101W Manuel utilisateur

Maxell

Maxell MP-WU8801W Manuel utilisateur

Maxell

Maxell MC-WU5505 Manuel utilisateur

Maxell

Maxell MP-TW4001 Document technique

Maxell

Maxell MP-EX5002 Document technique

Maxell

Maxell MP-WU5503 Manuel utilisateur

Maxell

Maxell CP-X8150 Manuel utilisateur

Maxell

Maxell MP-WX5603 Manuel utilisateur

Maxell

Maxell MC-EX5001 Manuel utilisateur

Maxell

Maxell MC-WX5506M Manuel utilisateur

Maxell

Maxell MP-WU9101B Manuel utilisateur

Maxell

Maxell MC-WU5505 Manuel utilisateur

Maxell

Maxell MP-AW4001 Manuel utilisateur

Maxell

Maxell CP-WX8255 Manuel utilisateur

Maxell

Maxell MC-EU5001 Manuel utilisateur

Manuels Projecteur populaires d'autres marques

iEmmet

iEmmet MP-312 Manuel utilisateur

Epson

Epson VS400 Manuel utilisateur

Sony

Sony VPL-HS10 Marketing Specifications & Features Manuel utilisateur

Sony

Sony VPL-HW65ES Manuel de service

Toshiba

Toshiba TLP-791U Manuel utilisateur

Philips

Philips LC1341 Guide de référence

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manuel utilisateur

NEC

NEC NP600S EDU Manuel utilisateur

BenQ

BenQ SH753P Manuel utilisateur

Eiki

Eiki EK-623U series Manuel utilisateur

Epson

Epson PowerLite Pro Cinema 6020UB Manuel utilisateur

Epson

Epson PowerLite Home Cinema 705HD Manuel utilisateur

Christie

Christie LHD700 Manuel utilisateur

Navitar

Navitar FX Manuel utilisateur

InFocus

InFocus LitePro 560 Manuel utilisateur

Sony

Sony SRX-R815P Manuel utilisateur

Vivitar

Vivitar DP1500 X Manuel utilisateur

Acer

Acer C20 Series Manuel utilisateur