Congratulations! You’ve just bought the MIDI audio switcher Max Control ASX-8.
This switcher is built with high quality parts in order to bring you the best
performance.
Description
Max Control ASX-8 is a programmable MIDI audio switcher with 8 relay-operated
true bypass audio loops, an A/B output selector, LCD display, and an intuitive user
interface.
Operation
To start using the switcher, connect a standard 9V DC power supply to the Pwr In
input jack:
MIDI IN jack is a 7-pin jack, it allows providing phantom power to the foot
controller. When using phantom power, if you need to supply a different voltage to
the controller you can plug a dedicated power supply in the Phantom jack.
Then connect the audio loops. Connect the SEND output to the effect's input, and the
effect's output to the RETURN input. The audio loops are linked internally in series.
The signal enters the switcher by IN jack, and outs by OUT A or B jack. A/B selector
is controllable by control change 88. To select OUT A use value = 0, to select OUT B
use value = 127.
The control panel has two sections: audio loops and navigation/setup.
The audio loops section has 8 buttons and status LEDs. Press the buttons to turn the
loops on/off:
To store the changes in the currently selected display (which is shown in the display)
press Ok/Next.
