points for recycling provided by the communities. For you, this is free of charge. Further
information about the subject is available at your community administration, your local waste
collection company, or in the store where you purchased this equipment.
SAFETY AND PRECAUTIONS
Do not stare into beam or view directly without laser eye protection. Staring continuously into
beam for prolonged periods of time could cause harm to your eyes. If used properly, this
device is safe for your eyes and laser eye protection is not needed.
-Use the correct battery (CR2) and proper battery orientation.
-Do not look at sun.
-Do not activate buttons while aiming at eye or looking into objective lenses.
FDA SAFETY
Class 1 laser product in accordance with IEC 60825-1: Edition 3 2014-05.
Complies with 21 CFR 1040.10 and 1040.11 for laser products except for deviations pursuant
to Laser Notice No. 50, dated June 24, 2007.
CAUTION:
There are no user controls, adjustments or procedures. Performance of procedures other than
those specified herein may result in access to invisible laser light.
This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
This equipment generates, uses and can radiate radio frequency energy, and if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
· Reorient or relocate the receiving antenna.
· Increase the separation between the equipment and receiver.
· Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
· Consult the dealer or an experienced radio/TV technician for help.
The device does not contain any user-serviceable parts. Repairs should only be made by
Maven or Authorized Maven agent. Unauthorized repairs or modifications could result in
permanent damage to the equipment and will void your warranty and your authority to operate
this device under Part 15 regulations. The shielded interface cable which is provided must be
used with the equipment in order to comply with the limits for a digital device pursuant to
Subpart B of Part 15 of FCC Rules.
DISPOSAL OF ELECTRIC AND ELECTRONIC EQUIPMENT:
(Applicable in the EU and other European countries with separate collection systems)
This equipment contains electric and/or electronic parts and must therefore not be disposed
of as normal household waste. Instead, it should be disposed at the respective collection
1. Unlike mankind, not all objects are created equal.
a. Some objects are more reflective than others.
b. Larger and more reflective objects are easier to detect.
c. Objects that are lighter in color are generally easier to acquire than dark objects.
2. Rain, snow and fog are not a laser’s friend.
a. This type of precipitation hinders ranging performance. In these conditions laser
will produce a more accurate reading in Forest mode.
b. Ranging in cloudy conditions can improve ranging performance; bright sunshine
can decrease ranging performance.
c. Ranging over a reflective body of water can cause inaccurate readings.
d. Flat and perpendicular surfaces reflect better than curved or angled surfaces.
3. Can’t get a reading (horizontal hash marks instead of distance)?
a. Press and hold the FIRE button while holding the reticle on the target. Ensure that the
FIRE button is not released before a distance is displayed.
b. Use the SCAN feature and technique. With the laser on, view through the eyepiece
and align the aiming reticle onto the object and press and hold the FIRE button and
move the laser slowly over the object until distance is displayed.
NOTE:
The RF.1 is designed to reach highly reflective targets out to 4500 yards. If a reading is not
displayed, target may not be within the distance threshold, or the size, color, and reflectivity
needed to provide an accurate reading.
CLEANING:
1. Remove as much dust and dirt as possible from the lenses with ablower or bristled
brush.
2. Apply a few drops of lens cleaning solution to a lens tissue or microfiber cleaning
cloth. Ensure that the cleaning cloth is free from dirt and grit so as not to scratch the
lenses. NEVER use a t-shirt, facial tissue or heavy cotton cloth on your lenses as they
can scratch the lenses.
3. Using a circular motion, gently remove oil, fingerprints, and grime from the lens
surface, working from the center outward.
4. For cleaning and disinfecting surfaces other than glass, spray a microfiber cloth with
Lysol spray and wipe down product or use a disinfectant wipe (e.g. Lysol, Clorox,
CaviWipes).
STORAGE:
When your RF.1 is not in use for over 3 months, we recommend removing the battery and
storing your RF.1 in a dry location at room temperature.
FCC REQUIREMENTS:
This device complies with Part 15 of the FCC interference limits for Class B digital devices
FOR HOME OR OFFICE USE. These limits are designed to provide reasonable protection
against harmful interference in a residential installation, and are more stringent than
“outdoor” requirements. Operation of this device is subject to the following conditions; (1)
RANGEFINDING TIPS:
