Matrox MDM-XENPRO Manuel utilisateur

20072-301-0110

2010.06.28

Matrox Xenia Series

Xenia • Xenia Pro

User Guide

ENGLISH

2 Matrox Xenia Series – User Guide

About this user guide

Your Matrox user guide provides information on installing and using your Matrox hardware. For

information on Matrox PowerDesk software features and options, see the help file included with your

PowerDesk software.

Using this guide

This guide assumes you’re familiar with basic functions like click, right-click and double-click, and

that you’re familiar with the basics of the operating system you’re using. Also, we use the following

conventions:



Bold

for headings and for references to text that appears on-screen.



Italics

for emphasis, file names, paths, publication titles, and new terms.



Keyboard keys in square brackets, with a plus sign separating keys that you press

simultaneously. For example: press [Ctrl]+[Alt]+[Del] to start Windows Task Manager.



Arrows (“

”) to separate ordered directions. For example, “click

” is

the same as “click

, then click

Close,

then click

”.



Green for cross-references. If you’re viewing online, click green text to jump to what’s

being referenced.

More information

We provide additional information in help and

Readme

files. Be sure to check for any last-minute

release notes included with your product.

Note:

This guide has references specific to version 2.09.01 or later of the Matrox display

driver. If you’re using a previous version of the Matrox display driver, certain references in

this guide may not reflect the software you have.

Matrox Xenia Series – User Guide 3

Overview

Your Matrox Xenia Series product is designed to use up to 3 high-resolution digital displays at a time –

1 Navigation Console and 2 Imaging Displays. With its high image quality, sharp grayscale and color

output, and multi-display support, this product can be used for a range of medical applications,

including PACS (Picture Archiving and Communication Systems), CR (Computed Radiography),

and DR (Digital Radiography).

Hardware supplied

Software available (for Windows 7/Vista/XP)



Matrox PowerDesk –

to use your Matrox product

Installation overview

To install your Matrox product:

Install the Matrox card – see “Hardware installation”, page 5.

Connect your monitors – see “Connection setup”, page 8.

Matrox card Dual-monitor cable

(LFH-60 to DVI)

* The hardware supplied with your Matrox product may vary depending on the SKU or part number of your product. For more

information, contact your Matrox representative.

Note:

If your Matrox product is already partially or fully installed on your computer, some

or all the installation information in this guide may not apply to you. However, this

information may be useful if you need to reinstall your Matrox product.

4 Matrox Xenia Series – User Guide

Install the software – To obtain a display driver for your Matrox product, contact your

Matrox representative.

Set up the software – see “Display setup”, page 11.

Matrox Xenia Series – User Guide 5

Hardware installation

This section describes how to install your Matrox card. If your Matrox card is already installed in your

computer, skip to “Connection setup”, page 8. For information specific to your computer, like how to

remove its cover, see your system manual.

Open your computer and

remove your existing graphics

card

If a graphics card

isn’t

already installed in

your computer, skip to step 2.

Using

Programs and Features

(Windows 7/Vista) or

Add/Remove

Programs

(Windows XP) in the

Windows

Control Panel

, remove any

currently installed display drivers.

Restart your computer for the changes

to take effect.

After your computer restarts, you’re

prompted to install drivers for the new

graphics hardware detected. Click

Cancel

Turn off your computer and all peripherals such as your monitor or printer.

WARNING:

To avoid personal injury and to prevent damage to your computer or Matrox

hardware, turn off your computer, unplug it, and then wait for it to cool before you install

your Matrox product and touch any of the internal parts of your computer.

While your computer is turned off but still plugged in, some electrical current is supplied

to the motherboard. This current may prevent newly installed hardware from working

properly.

Also, static electricity can severely damage electronic parts. Before touching any electronic

parts, drain static electricity from your body (for example, by touching the metal frame of

your computer). When handling a card, carefully hold it by its edges and avoid touching

its circuitry.

* With multi-display mode, you may be able to use your existing graphics card. For Windows XP, see Windows online help under

“Install additional monitors”. For Windows Vista, see Windows online help under “Add a second monitor”.

6 Matrox Xenia Series – User Guide

Open the computer and remove your existing graphics card (if any). (If graphics

hardware is built into the motherboard of your computer, you may need to disable it

manually. For more information, see your system manual.)

Choose an expansion slot

Most computers have different types of

expansion slots. Choose a PCI Express ×16

(PCIe) slot for your Matrox card. Your

system manual should identify the location

of each type of expansion slot in your

computer.

(64-bit)

(Back of computer)

(32-bit)

PCI Express

slots

(×16)

(×1)

PCI slots

WAR NING:

Inserting your Matrox card

into the wrong type of slot could damage

your card, your computer, or both.

×16

×1 ×4 ×8

PCI Express card

64-bit

32-bit

PCI card

Matrox Xenia Series – User Guide 7

Insert your Matrox card

Position your Matrox card over the

expansion slot you’ve chosen.

Push the card in firmly and evenly until

it’s fully seated in the slot.

Secure the bracket of your Matrox card

to the computer frame.

Your Matrox card is now installed.

Before restarting your computer,

connect your monitor or

monitors (see “Connection setup”, page 8).

After connecting,

restart your computer and install your

Matrox software (see “Software setup”, page 11).

8 Matrox Xenia Series – User Guide

Connection setup

This section describes how to connect monitors to your Matrox product.

Note:

Your Matrox dual-monitor cable supports only digital monitors. If analog monitors

are connected to the dual-monitor cable, the two displays remain blank (black).

WAR NING:

Don’t change monitor connections while your computer is turned on. While

your computer is turned on, it may be using monitor settings that are specific to the

current monitor connections.

Some

devices may be permanently damaged if incorrect

settings are used.

Note:

Whenever you change your connection setup, make sure you’re using the correct

connectors and that all connectors are properly fastened.

Note:

To c o n n e c t a

digital

monitor (a

monitor that uses digital input, usually a

flat panel monitor) to your Matrox

product, your monitor must have a DVI

connector.

Some monitors with DVI connectors

support both digital and analog input. If

you’re using one of these monitors with

your Matrox product, make sure it’s configured to use the correct type of input. For more

information, see your monitor documentation.

DVI connector

(DVI-D: digital)

HD-15 connector (analog)

DVI connector

(DVI-I: analog/digital)

Matrox Xenia Series – User Guide 9

Connector overview

Step-by-step connection setup

The following describes how to connect analog or digital monitors to your Matrox product.

Connect the navigation console

(optional)

Connect your navigation console directly to

the main connector (

) on your Matrox

card.

Dual-monitor cable

Digital imaging

connector (

)

Monitor connector

(HD-15)

Digital imaging

connector (

)

DVI to HD-15

adapter

Monitor connector

(DVI)

Main

connector (

)

Secondary

connector (

)

Monitor connector (DVI)

10 Matrox Xenia Series – User Guide

If your monitor has an HD-15 connector,

use a DVI to HD-15 adapter (sold

separately) to connect your monitor to the

main connector.

Attach the dual-monitor cable

Attach your dual-monitor cable to the

secondary connector (

) on your Matrox

card. Make sure the connectors are properly

fastened.

Connect the digital imaging

displays

Connect your first digital imaging display to the DVI connector labeled

of the dual-monitor

cable.

Connect your second digital imaging display to the DVI connector labeled

of the

dual-monitor cable.

Your Matrox card is now installed. Restart your computer and install your Matrox software (see

“Software setup”, page 11).

Note:

While using an analog monitor,

certain limitations may apply. Specifically,

certain features are supported only while

using a digital monitor.

Monitor connector

(HD-15)

DVI to HD-15

adapter

Dual-monitor cable

WAR NING:

To avoid damaging the LFH-60 connector

on your dual-monitor cable or on your graphics card,

carefully insert the connector on your dual-monitor cable

as straight as possible into the connector on your graphics

card. Specifically, inserting the connectors into each other

at an angle is likely to bend and damage the pins on the

connector of the dual-monitor cable.

Note:

Your Matrox dual-monitor cable

supports only digital monitors.

Monitor connector

(DVI)

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Matrox Carte vidéo

Matrox

Matrox PJ-4OLP Manuel utilisateur

Matrox

Matrox Millennium G400 Manuel utilisateur

Matrox

Matrox DigiSuite LX MAX Mode d’emploi

Matrox

Matrox Parhelia Precision SGT Manuel utilisateur

Matrox

Matrox C680 Manuel utilisateur

Matrox

Matrox QID Manuel utilisateur

Matrox

Matrox EpicA Series Manuel utilisateur

Matrox

Matrox Millennium G450 DVI Manuel utilisateur

Matrox

Matrox RAD LPX Series Manuel utilisateur

Matrox

Matrox C Series Manuel utilisateur

Matrox

Matrox MURAIPXI-E4JHF Manuel utilisateur

Matrox

Matrox Millennium G550 Manuel utilisateur

Matrox

Matrox Millenium Manuel utilisateur

Matrox

Matrox V-Play DigiSuite Manuel utilisateur

Matrox

Matrox Parhelia Manuel utilisateur

Matrox

Matrox Digidesktop Mode d’emploi

Matrox

Matrox D Series Manuel utilisateur

Matrox

Matrox RAD Series Manuel utilisateur

Matrox

Matrox Millennium G400 Manuel utilisateur

Matrox

Matrox G100 Series Manuel utilisateur

Matrox

Matrox ATC Series Manuel utilisateur

Matrox

Matrox C900 Manuel utilisateur

Matrox

Matrox Mojito MAX Manuel utilisateur

Matrox

Matrox Solios Series Instructions de montage

Manuels Carte vidéo populaires d'autres marques

Gainward

Gainward GeForce GTX 690 4GB Manuel utilisateur

ATI Technologies

ATI Technologies RADEON 137-40225-20 Manuel utilisateur

MSI

MSI N220GT series Manuel utilisateur

ATI Technologies

ATI Technologies RADEON 7000 MAC EDITION Manuel utilisateur

SIIG

SIIG aurora Manuel utilisateur

ClearSpeed

ClearSpeed ClearSpeed Advance e720 Manuel utilisateur

MSI

MSI R7850 series Manuel utilisateur

DVS

DVS Atomix HDMI Manuel utilisateur

Aztech

Aztech VGS3D-AGP Manuel utilisateur

Advoli

Advoli TB4 Standard Manuel utilisateur

ELSA

ELSA ERAZOR III LT Manuel utilisateur

Gigabyte

Gigabyte GV-R7500L Manuel utilisateur

Themis

Themis TGA-7000 PMC Manuel utilisateur

EMS

EMS XtremeRGB-Ex1 Manuel utilisateur

Nvidia

Nvidia Quadro Workstation Manuel utilisateur

Pioneer

Pioneer PDA-5003 Manuel utilisateur

QDI

QDI N2 Manuel utilisateur

NEC

NEC N8116-48 Manuel utilisateur