Matrix R30 Manuel utilisateur

R30 U30

R50 U50

3 ENGLISH

15 FRANÇAIS

27 ESPAÑOL

WARNING!

There are several areas during the assembly process that special attention

must be paid. It is very important to follow the assembly instructions correctly

and to make sure all parts are rmly tightened. If the assembly instructions are

not followed correctly, the equipment could have parts that are not tightened

and will seem loose and may cause irritating noises. To prevent damage to the

equipment, the assembly instructions must be reviewed and corrective actions

should be taken.

TOOLS INCLUDED:

FPhillips Screwdriver

FR30/R50: 6 mm Hex Wrench, 5 mm Hex Wrench, 4 mm Hex Wrench

FU30/U50: 5 mm Hex Wrench, 4 mm Hex Wrench, 2.5 mm Hex Wrench, 8 mm Wrench

R30 / R50 PARTS INCLUDED:

F1 Bike Frame

F1 Console Mast

F1 Handlebars

F1 Top Cap Front Cover

F1 Top Cap Rear Cover

F1 Seat Frame Assembly

F1 Seat Bottom

F1 Water Bottle Holder

F1 Mesh Seatback

F1 Outside Cover (R30 only)

F1 Inside Cover (R30 only)

F1 Power Cord

F1 Hardware Kit

Console sold separately

ASSEMBLY

Before proceeding, nd your equipment’s serial number located on a barcode

sticker and enter it in the space provided below.

SERIAL NUMBER

MODEL NAME

FR30

FR50

FU30

FU50

MATRIX EXERCISE BIKE

* Use the information above when calling for service.

SERIAL NUMBER LOCATION

NEED HELP?

If you have questions or if there are any missing parts, contact Customer Tech Support. Contact information

is located on the information card.

U30 / U50 PARTS INCLUDED:

F1 Bike Frame

F1 Seat

F2 Console Mast

F1 Handlebar

F1 Handlebar Set

F1 Bike Seat Bracket

F1 Water Bottle Holder

F1 Console Back Cover

F1 Power Cord

F1 Hardware Kit

Console sold separately

UNPACKING

Unpack the equipment where you will be

using it. Place the carton on a level at

surface. It is recommended that you place

a protective covering on your oor. Never

open box when it is on its side.

IMPORTANT NOTES

During each assembly step, ensure that ALL nuts and bolts

are in place and partially threaded.

Several parts have been pre-lubricated to aid in assembly

and usage. Please do not wipe this off. If you have diculty,

a light application of lithium grease is recommended.

ENGLISH

R30 /R50

PAGE 5

U30 / U50

PAGE 10

ENGLISH

CONSOLE MAST HANDLEBARS

CONSOLE

CONSOLE MAST

TOP CAP

POWER CORD SOCKET

FRONT SHROUD

CRANK

RESISTANCE TOGGLES

PULSE GRIP

HANDLEBARS

SEAT BOTTOM

MESH SEAT BACK

WATER BOTTLE HOLDER

SEAT BACK ADJUSTMENT

LEVER (R50 ONLY)

SEAT POSITION ADJUSTMENT LEVER

R50 SHOWN

R30

R50

PEDALS

ENGLISH

A Open HARDWARE FOR STEP 1.

B Carefully pull the CABLES (1) through the CONSOLE

MAST (2) using the LEAD WIRE (3) located inside

the CONSOLE MAST (2). Discard the lead wire.

C Attach the CONSOLE MAST (2) to MAIN FRAME

(4) using 4 BOLTS (A) and 4 SPRING WASHERS (B).

Torque settings: 23.1 Nm / 17 lb-ft.

Note: Be careful not to pinch any wires while attaching

the console mast.

1 2

Hardware For Step 1

Description Qty

A Bolt 4

B Spring Washer 4

Hardware For Step 2

Description Qty

C Bolt 2

B Spring Washer 2

R30

R50

R30

R50

A Open HARDWARE FOR STEP 2.

B Slide TOP CAP REAR COVER (5) over

CONSOLE MAST (2) and snap into place.

C Slide TOP CAP FRONT COVER (6) over

CONSOLE MAST (2) and snap into place

D Attach HANDLEBARS (7) to CONSOLE MAST (2)

using 2 BOLTS (C) and 2 SPRING WASHERS (B).

Torque settings: 23.1 Nm / 17 lb-ft.

R50 SHOWN

ENGLISH

3 4

R30

R50

R30

R50

A Open HARDWARE FOR STEP 3

B Attach the SEAT FRAME ASSEMBLY (8) to the SEAT

SLIDE (9) using 4 BOLTS (D) and 4 SPRING WASHERS

(E). Torque settings: 23.1 Nm / 17 lb-ft.

C Connect the CABLES (10).

Note: Be careful not to pinch any wires while attaching the seat frame.

Hardware For Step 3

Description Qty

D Bolt 4

E Spring Washer 4

A Open HARDWARE FOR STEP 4

B Attach the SEAT BOTTOM (11) to the SEAT FRAME

ASSEMBLY (8) using 4 BOLTS (F) and 4 SPRING

WASHERS (G).

C Attach the WATER BOTTLE HOLDER (12) to the

SEAT FRAME ASSEMBLY (8) using 2 SCREWS (H).

Hardware For Step 4

Description Qty

F Bolt 4

G Spring Washer 4

HScrew 2

R50 SHOWN

ENGLISH

NOTE: This step is for R30 models only.

A Open HARDWARE FOR STEP 5.

B Place the INSIDE COVER (13) over the MESH SEAT BACK

(14) and mount the MESH SEAT BACK (14) to the SEAT

FRAME ASSEMBLY (8) with 4 BOLTS (C) and 4 SPRING

WASHERS (I). Torque settings: 23.1 Nm / 17 lb-ft.

C Attach the OUTSIDE COVER (15) to the SEAT FRAME (8) and

INSIDE COVER (13) with 3 SCREWS (J).

5 5

Hardware For Step 5

Description Qty

C Bolt 4

I Spring Washer 4

JScrew 3

Hardware For Step 5

Description Qty

I Bolt 6

R30 R50

NOTE: This step is for R50 models only.

A Open HARDWARE FOR STEP 5.

B Attach the MESH SEAT BACK (14) to the SEAT

FRAME ASSEMBLY (8) using 6 BOLTS (I). Torque

settings: 9.5 Nm / 7 lb-ft.

ENGLISH

6 7

R30

R50

A Open HARDWARE FOR STEP 6.

B Connect the CABLES (1) to the CONSOLE (17) and carefully

tuck the excess cable into the CONSOLE MAST (2).

C Attach the CONSOLE (17) to the CONSOLE

MAST (2) using 4 BOLTS (K).

Note: Be careful not to pinch any wires while attaching the console.

R50 SHOWN

R30 / R50 ASSEMBLY COMPLETE!

R30 R50

SEAT ADJUSTMENT

To determine proper seat position, sit on the seat and position the ball

of your foot on the center of the pedal. Your knee should bend slightly

at the furthest pedal position. You should be able to pedal without

locking your knees or shifting your weight from side to side.

NOTE: It is recommended that you do not sit on the seat while adjusting its position.

SEAT POSITION

To adjust, lift up on the adjustment

lever and hold. Then, slide the

seat to a position that puts you

in a comfortable pedaling range

(one that keeps a slight bend in

your knee while your legs are in

the extended position). Release

lever to lock the mechanism.

SEAT BACK ADJUSTMENT (R50)

To adjust the tilt angle of the

seat back, rotate the lever down

(counterclockwise) and lean back

on the mesh seat back until the

desired position is achieved. When

the position is set, rotate the lever

upward (clockwise) until it is snug.

The seat back comes equipped

with a spring return system to

return the seat back to its original

position when the adjustment

lever is released and the user is

not leaning against the seat back.

ENGLISH

Hardware For Step 6

Description Qty

K Bolt 4

CONSOLE

PULSE GRIP HANDLEBARS

RESISTANCE TOGGLES

SEAT

SEAT ADJUSTMENT LEVER/KNOB

SHROUD

POWER CORD SOCKET

CONSOLE MASTS

WATER BOTTLE HOLDER

TOP CAP

CRANK

PEDALS

U50 SHOWN

U30

U50

ENGLISH

Autres manuels pour R30

Ce manuel convient aux modèles suivants

Table des matières

Langues :

Autres manuels Matrix vélo d'appartement

Matrix

Matrix U30 Manuel utilisateur

Matrix

Matrix U7xi Manuel utilisateur

Matrix

Matrix R7xe Instructions d'installation

Matrix

Matrix Performance Upright Cycle Manuel utilisateur

Matrix

Matrix CXP Manuel utilisateur

Matrix

Matrix MX-U5 Manuel utilisateur

Matrix

Matrix U5x-05 Manuel utilisateur

Matrix

Matrix U7xe Manuel utilisateur

Matrix

Matrix R3x-01 Manuel utilisateur

Matrix

Matrix u7xe-01 Manuel utilisateur

Matrix

Matrix R3XE-01 Manuel utilisateur

Matrix

Matrix IC5 Manuel utilisateur

Matrix

Matrix IC-MXIC5B-02 Manuel utilisateur

Matrix

Matrix U7XE-03 Manuel utilisateur

Matrix

Matrix IC-MXIC7B-02 Manuel utilisateur

Matrix

Matrix IC-MXEB-01 Manuel utilisateur

Matrix

Matrix R7XE-02 Bike Manuel utilisateur

Matrix

Matrix r7xi-02 Manuel utilisateur

Matrix

Matrix CXP Manuel utilisateur

Matrix

Matrix U1x Manuel utilisateur

Matrix

Matrix KranKcycle Manuel utilisateur

Matrix

Matrix H3XE-01 Manuel utilisateur

Matrix

Matrix A7XI-01 Manuel utilisateur

Matrix

Matrix R5X-03 Manuel utilisateur

Manuels vélo d'appartement populaires d'autres marques

Weslo

Weslo Vector 302 Guide de démarrage rapide

TOORX

TOORX BRX85 Manuel utilisateur

Sunny Health & Fitness

Sunny Health & Fitness SF-B121021 Manuel utilisateur

Monark

Monark 827E Manuel utilisateur

Stamina

Stamina 1310 Manuel utilisateur

American Fitness

American Fitness SPR-BK1072A Manuel utilisateur

Cateye

Cateye CS-1000 (CYCLO SIMULATOR) Manuel utilisateur

BH FITNESS

BH FITNESS H9158H Manuel de l'opérateur

Body Sculpture

Body Sculpture BC-7220G Manuel utilisateur

Cateye

Cateye EC-2300 Manuel utilisateur

FYTTER

FYTTER RACER RC MSR Manuel utilisateur

Kikos

Kikos HM-9090M Manuel utilisateur

Pro-Form

Pro-Form 345 Zlx Bike Guide de l'utilisateur

Fuel Fitness

Fuel Fitness SU135-40 Manuel utilisateur

NordicTrack

NordicTrack Gxr 4.2 Bike Manuel utilisateur

Vision Fitness

Vision Fitness U70 Manuel utilisateur

Stamina

Stamina 15-0340A Manuel utilisateur

KIDSFIT

KIDSFIT Cardio Kids 661 Manuel utilisateur