Matrix Switch Corporation MSC-2HD3208S Manuel utilisateur

Matrix Switch Corporation

MSC-2HD3208S

Product Manual

2RU 32 input 8 output 3G-SDI Vid o Rout r with Status Pan l

R vision 1.2

MSC-2HD3208S Product Manual

Legal Disclaimers

All material in this document is the legal property of Matrix Switch Corporation.

Information contained in this publication regarding device applications and the like is

provided for your convenience only and may be superseded by updates. It is your

responsibility to ensure that your application meets with your specications. MA RIX

SWI CH CORPORA ION MAKES NO REPRESEN A IONS OR WARRAN IES OF ANY

KIND WHE HER EXPRESS OR IMPLIED, WRI EN OR ORAL, S A U ORY OR

O HERWISE, RELA ED O HE INFORMA ION, INCLUDING BU NO LIMI ED O

I S CONDI ION, QUALI Y, PERFORMANCE, MERCHAN ABILI Y OR FI NESS FOR

PURPOSE. Matrix Switch Corporation disclaims all liability arising from this

information and its use. Use of Matrix Switch Corporation devices in life support and/or

safety applications is entirely at the buyer’s risk, and the buyer agrees to defend,

indemnify and hold harmless Matrix Switch Corporation from any and all damages,

claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly

or otherwise, under any Matrix Switch Corporation intellectual property rights.

Contacting Matrix Switch Corporation

W bsit http://www.matrix-switch.tv

Phon (530) 477-9122

Email [email protected]

MSC-2HD3208S Product Manual

Publication History

Revision & Date Changes

Revision 1.2

2015-08-20

•Added protocol commands: MtxGroup, PanelDis, PanelExtEn, and

Sierra.

•Updated Mascot protocol information to version 2.4.

•New manuals for MSC-V1616(LS)(+DC), MSC-1HD1616(LS)(+DC)

Revision 1.1

2014-06-24

•Updated External Button Control Pinout section.

•Added External Button Control information for MSC-HD42L.

2014-03-17 •Fixed some document cross references.

•Minor text content and gure position changes.

2013-11-29 •MSC-4HDX6464 manual released.

•Updated Mascot protocol information to version 2.3.

•Added Vars Mascot command description.

Revision 1.0

2013-04-15

•Initial release of modular product manual.

MSC-2HD3208S Product Manual

Table of Contents

1 G tting Start d....................................................................................................................................................7

1.1 Device Connections......................................................................................................................................7

1.2 Powering p The Device..............................................................................................................................7

1.3 Front Status Panel.........................................................................................................................................8

1.4 Web Page Interface........................................................................................................................................8

1.4.1 Accessing The Web Page Interface........................................................................................................8

1.4.2 Network Settings...................................................................................................................................9

1.4.3 Matrix Routing......................................................................................................................................9

1.4.4 Labels....................................................................................................................................................9

1.4.5 Presets....................................................................................................................................................9

1.5 Network Planning..........................................................................................................................................9

1.5.1 Installation Example............................................................................................................................11

1.6 3D Video Configuration..............................................................................................................................11

2 W b pag int rfac ............................................................................................................................................13

2.1 Overview.....................................................................................................................................................13

2.2 Routing Tab.................................................................................................................................................13

2.2.1 Changing a connection........................................................................................................................14

2.2.2 Loading a preset..................................................................................................................................14

2.3 Presets Tab...................................................................................................................................................14

2.3.1 Loading Work Matrix from a source target.........................................................................................15

2.3.2 Saving Work Matrix to a target...........................................................................................................15

2.3.3 sage scenarios...................................................................................................................................15

2.4 Labels Tab...................................................................................................................................................15

2.5 Config Tab...................................................................................................................................................16

2.5.1 System Settings...................................................................................................................................17

2.5.2 Network Settings.................................................................................................................................17

2.5.3 Button Panel Settings..........................................................................................................................18

2.6 Command Tab.............................................................................................................................................19

3 Mascot Control Protocol..................................................................................................................................20

3.1 Protocol changes.........................................................................................................................................20

3.2 Telnet access................................................................................................................................................21

3.3 Serial access................................................................................................................................................21

3.4 Command format........................................................................................................................................21

3.4.1 Command names.................................................................................................................................22

3.4.2 Command arguments...........................................................................................................................22

3.5 Response format..........................................................................................................................................22

3.6 Command argument values.........................................................................................................................22

3.7 Error codes..................................................................................................................................................23

3.8 Basic command reference...........................................................................................................................24

3.9 Advanced command reference....................................................................................................................24

3.10 B Command..............................................................................................................................................25

3.11 C Command...............................................................................................................................................26

3.12 DestNames Command...............................................................................................................................26

MSC-2HD3208S Product Manual

3.13 DHCP Command.......................................................................................................................................27

3.14 E Command...............................................................................................................................................27

3.15 Firmware Command..................................................................................................................................28

3.16 FrameIP Command...................................................................................................................................28

3.17 Gateway Command...................................................................................................................................28

3.18 Help Command.........................................................................................................................................28

3.19 IP Command..............................................................................................................................................28

3.20 LockStatus Command...............................................................................................................................29

3.21 MAC Command........................................................................................................................................29

3.22 MascotVer Command................................................................................................................................30

3.23 MtxCfg Command....................................................................................................................................30

3.24 MtxGroup Command................................................................................................................................32

3.25 NetMask Command..................................................................................................................................33

3.26 P Command...............................................................................................................................................33

3.27 PAdd Command........................................................................................................................................34

3.28 PairIO Command......................................................................................................................................34

3.29 PanelOfs Command..................................................................................................................................34

3.30 PanelDis Command...................................................................................................................................35

3.31 PanelExtEn Command..............................................................................................................................36

3.32 PanelRate Command.................................................................................................................................36

3.33 PClr Command..........................................................................................................................................37

3.34 PsetNames Command...............................................................................................................................37

3.35 PSub Command.........................................................................................................................................38

3.36 PView Command......................................................................................................................................38

3.37 Reboot Command......................................................................................................................................39

3.38 ReclkDis Command..................................................................................................................................39

3.39 RemoteSync Command.............................................................................................................................39

3.40 S Command...............................................................................................................................................40

3.41 Sierra Command........................................................................................................................................40

3.42 SrcNames Command.................................................................................................................................40

3.43 SysName Command..................................................................................................................................41

3.44 SysType Command...................................................................................................................................41

3.45 Vars Command..........................................................................................................................................42

3.46 W Command.............................................................................................................................................43

3.47 WebPass Command...................................................................................................................................43

3.48 X Command..............................................................................................................................................43

4 Softwar Updat s..............................................................................................................................................45

4.1 Software pdate on Carina Series Devices................................................................................................45

4.1.1 Software pdate Requirements...........................................................................................................45

4.1.2 Power on Software pdate..................................................................................................................45

4.1.3 Command Software pdate................................................................................................................46

4.2 TFTP Software............................................................................................................................................47

4.2.1 Windows XP........................................................................................................................................47

4.2.2 Windows Vista and Windows 7...........................................................................................................47

4.2.3 Mac OSX.............................................................................................................................................47

4.2.4 Linux....................................................................................................................................................48

MSC-2HD3208S Product Manual

4.3 Software pdate Errata...............................................................................................................................49

4.3.1 pgrading from version 4.x.x or older firmware................................................................................49

4.3.2 Downgrading from version 5.4.0 to a previous version......................................................................50

5 Troubl shooting.................................................................................................................................................51

5.1 nknown IP address....................................................................................................................................51

5.2 No Ethernet link when connected to network switch..................................................................................51

5.3 nexpected reboots.....................................................................................................................................51

6 R f r nc ...........................................................................................................................................................52

6.1 Specifications..............................................................................................................................................52

6.2 Glossary.......................................................................................................................................................53

7 Matrix Switch Corporation Warranty............................................................................................................54

MSC-2HD3208S Product Manual

1 Getting Started

Congratulations on your purchase of a quality Matrix Switch Corporation product. This section contains a

general overview of device functionality and provides information to get you up and running quickly.

Additional sections in this manual can be consulted for more detailed information on the subsystems and

features of this product.

1.1 Device Connections

The MSC-2HD3208S comes with a power supply adapter, a redundant power supply and a documentation CD.

Additional cables and hardware are not usually provided.

•Pow r supply adapt r – A 12 Volt 5 Amp power supply adapter is provided which is connected to the

DE-9 male connector on the device and plugged into a 100-240V 50/60Hz AC power source.

•R dundant pow r supply (Optional) – The additional redundant power supply can be connected via

the second power supply connector, to provide an additional power source in the event that one of the

supplies fails or is disconnected from the power source.

•Eth rn t conn ctor (Optional) – Connect to a network switch with an Ethernet cable. Required for

accessing the web page interface, TCP/IP Mascot interface or for interfacing with remote control panels.

A crossover cable can also be utilized for connecting directly to a computer or remote panel.

•SDI Vid o Inputs – Connect SDI sources to input connectors using 75 Ohm Coax cable with BNC

connectors designed for high speed SDI video applications. nused inputs can be left unconnected.

Inputs with supported standard rate (3G, HD or SD) SDI signals will be auto re-clocked for reduced

jitter. Other non standard rates between 125 Mbit/s and 2.97 Gbit/s will be passed through without re-

clocking or jitter reduction. Adaptive cable equalization on each input can equalize input signals from

Belden type 1694A cables up to lengths of 120m (@3G), 140m (@HD) and 400m (@SD).

•SDI Vid o Outputs – Connect SDI destinations to output connectors using 75 Ohm Coax cable with

BNC connectors designed for high speed SDI video applications. nused outputs can be left

unconnected. Outputs utilize standard SMPTE levels of 800mV peak-to-peak.

•Ext rnal Audio Rout r (Optional) – An additional Matrix Switch Corporation AES or analog audio

router can be utilized with this router by connecting it to the AFV connector with a 25 pin straight

through cable, adding an additional audio level independent of SDI embedded audio. NOTE: The audio

router should be powered on before the video router to ensure proper initial routing state or alternatively

Preset 0 can be recalled to initialize it at any time.

•Sync R f r nc (Optional) – If switching on vertical sync pulse is desired, connect one of the Sync

Reference connectors to a sync pulse signal (NTSC, PAL or tri-level) using 75 Ohm Coax with BNC

connectors and the other Sync Reference connector can be used as a pass-through to additional properly

75 Ohm terminated equipment or a 75 Ohm terminator should be installed. If the sync reference

functionality is not used, both connectors can be left unconnected.

•RS-232 S rial (Optional) – If serial control is desired, using the Mascot P rotocol, connect a D9 female

to male straight through cable to a control system, such as a computer. se 9600 bps 8N1 as the serial

configuration and enable local echo to see typed characters.

1.2 Powering p The Device

This device is not equipped with a power switch and is simply connected to the power supply adapter which is

plugged into a suitable AC power source, to power it up.

MSC-2HD3208S Product Manual

Once the device is powered it goes through the following startup sequence:

•5 second startup delay to allow for Power On Software pdates.

•Routing matrix is initialized to Preset 0 state (defaults to source 1 connected to all destinations).

•The status panel R N/SYS LED will flash at regular intervals once the system has booted up.

1.3 Front Status Panel

The MSC-2HD3208S has a status front panel with 4 LED indicators, described in the following table.

LED Lab l D scription

PWR Active when power is supplied to the device.

SYS Flashes at regular intervals to indicate the system is running.

LAN Active when the Ethernet port is physically connected.

TX/RX Flashes on Ethernet transmit or receive activity.

This model is not equipped with a built-in button control panel, however several options are available for

controlling the device, including the web page interface, telnet, RS-232 serial and remote control panels.

1.4 Web Page Interface

All Matrix Switch Corporation router and panel devices come with a built-in web page interface.

This is the recommended interface for configuration and is also a convenient way to control the matrix routing

of the device.

Devices come factory configured with default settings, unless a pre-configuration request is made during

purchase, an example being a multi device application.

1.4.1 Accessing The Web Page Interface

The default network IP address for this device is 192.168.2.60. Refer to the table below for the default IP

addresses for other types of Matrix Switch Corporation devices.

D vic Typ D fault IP Addr ss

Video/Audio Routers 192.168.2.60

Remote Button Panels 192.168.2.64

Remote LCD Screen Panels 192.168.2.80

To access the web page interface of the device:

1. Connect the Ethernet port of a computer either directly to the device using a crossover cable or to the

same Ethernet network through a network switch or other LAN infrastructure.

2. Manually configure the computer's IP address to be a uniqu address on the same IP subnet as the

device. For example 192.168.2.10. The Netmask should be 255.255.255.0. The Gateway doesn't

MSC-2HD3208S Product Manual

matter for this purpose, but could be set to 192.168.2.1.

3. Make sure the device is powered on.

4. sing a web browser on the computer, enter the device's IP address into the Location bar and press

ENTER. The web page interface should load. If the web page interface fails to load, double check the

computer's network settings and physical Ethernet connections. In the event that the IP address of the

device is unknown, refer to the nknown IP Address troubleshooting section.

1.4.2 Network Settings

Network settings can be changed on the Config tab of the Web Page Interface. This includes DHCP enable, IP

address, Netmask and Gateway settings. DHCP should only be used for assigning specific network settings

from a central DHCP server or when assigned IP addresses can be determined, otherwise configuring the device

via its IP address would be prevented if the IP address is unknown. After changing network settings, click the

Save button and then click the Reboot button to restart the device. Refer to the Config Tab - Network Settings

section for more details.

In the event that the device's IP address is unknown, refer to the nknown IP Address troubleshooting section.

Refer to the Network Planning section for assistance with developing a network plan for multi-device

applications.

1.4.3 Matrix Routing

The Routing tab of the Web Page Interface provides a convenient way to view and change the matrix routing

state and is the default page shown.

A preset can also be recalled from this interface, by selecting one from the Load Preset drop down control.

Refer to the Routing Tab section for more details.

1.4.4 Labels

Labels can be assigned to video (and audio if applicable) sources and destinations. Labels can also be assigned

to presets. Labels can be up to 8 characters in length. The default source labels use “Src” as a prefix, and the

destination labels use “Dest” as a prefix (example: Src1). The presets are labeled “Startup” for Preset 0 and

“PresetN”, where N is a number from 1 to 9, for the remaining presets.

The Labels Tab on the Web Page Interface can be used for modifying labels. Click the Save button to store any

changes that are made. Refer the Labels Tab section for more details.

1.4.5 Presets

There are 10 stored matrix routing presets. Preset 0 is recalled on power up and by default routes source 1 to all

destinations. All other presets default to “No Change” for all destinations, which when recalled will have no

effect. Presets can assign a partial subset of destinations or all destinations as desired.

Presets can be modified on the Presets Tab of the Web Page Interface. Refer to the Presets Tab section for more

details.

1.5 Network Planning

The default device settings can be used without change in applications with a single router and optionally one

MSC-2HD3208S Product Manual

remote panel on the same Ethernet network. Larger installations or integration with existing IP LAN networks

require some network planning.

NOTE: Matrix Switch Corporation can assist in planning and pre-configuring devices for specific application

requirements at purchase time. Just ask a sales or customer service representative.

Manual IP address management is recommended, although a DHCP server can be a convenient option for

centrally managing IP addresses by device MAC address, the net effect still being a fixed IP for each device.

Consult your DHCP server documentation for information on assigning IP addresses by MAC address, if this

option is chosen.

All devices which need to communicate with one another (routers, remote panels and computers) need to be

physically connected to the same LAN or allow IP packet routing between networks if on separate LANs.

SECURITY WARNING: Matrix Switch Corporation devices are meant for installation in trusted LAN

environments. In the event that remote device configuration or control is desired over public networks or the

Internet, it is strongly recommended that some form of inter-network security is utilized, such as firewalls and

encrypted VLAN or secure data tunnels. This is necessary to prevent undesired access to devices.

Devices on the same LAN need to be assigned unique IP addresses in the same IP subnet. Matrix Switch

Corporation devices are configured by default to use IP addresses in the class C IP subnet 192.168.2.x. When

integrating devices into an existing LAN network, unique IP addresses should be assigned from the applicable

network and the Netmask setting of the devices should be set to reflect the class (size) of the IP network (the

default of 255.255.255.0 is for class C, which accommodates up to 254 addresses).

The Gateway setting is required to be set to the IP address of the network gateway on remote panels which will

be accessing routers across network subnets, but this setting is otherwise not needed.

After assigning device network settings, including unique IP addresses, remote panels need to be assigned the

correct IP addresses to their R mot Rout r IP setting of the router they will control.

Additional configuration changes may be required, depending on the application and are described in

subsequent sections.

Autres manuels pour MSC-2HD3208S

Table des matières

Autres manuels Matrix Switch Corporation Matériel réseau

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD44AAL Manuel utilisateur

Matrix Switch Corporation

Matrix Switch Corporation MSC-CP32X32E Manuel utilisateur

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuel utilisateur

Matrix Switch Corporation

Matrix Switch Corporation MSC-V1616S Manuel utilisateur

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD84AAL Manuel utilisateur

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161AAS Manuel utilisateur

Matrix Switch Corporation

Matrix Switch Corporation MSC-CP59X59E Manuel utilisateur

Matrix Switch Corporation

Matrix Switch Corporation MSC-CP8X1E Manuel utilisateur

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD88L Manuel utilisateur

Matrix Switch Corporation

Matrix Switch Corporation MSC-CP16X16E Manuel utilisateur

Matrix Switch Corporation

Matrix Switch Corporation MSC-2HD3208L Manuel utilisateur

Matrix Switch Corporation

Matrix Switch Corporation MSC-2HD2432S Manuel utilisateur

Matrix Switch Corporation

Matrix Switch Corporation MSC-5-1664 Manuel utilisateur

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD121AAS Manuel utilisateur

Matrix Switch Corporation

Matrix Switch Corporation MSC-2HD3232S Manuel utilisateur

Matrix Switch Corporation

Matrix Switch Corporation MSC-2HD2416L Manuel utilisateur

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD44AAS Manuel utilisateur

Matrix Switch Corporation

Matrix Switch Corporation MSC-2HD2416S Manuel utilisateur

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD81AAS Manuel utilisateur

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD44DEL Manuel utilisateur

Matrix Switch Corporation

Matrix Switch Corporation MSC-2HD3216S Manuel utilisateur

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD44S Manuel utilisateur

Matrix Switch Corporation

Matrix Switch Corporation MSC-HDX4000 Manuel utilisateur

Matrix Switch Corporation

Matrix Switch Corporation MSC-2HD3232L Manuel utilisateur

Manuels Matériel réseau populaires d'autres marques

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuel utilisateur

Yudor

Yudor YDS-16 Manuel utilisateur

D-Link

D-Link ShareCenter DNS-320L Manuel utilisateur

Samsung

Samsung ES1642dc Instructions d'utilisation

Honeywell Home

Honeywell Home LTEM-PV Instructions de montage

evertz

evertz 7700 Series Manuel utilisateur

D-Link

D-Link ShareCenter DNS-343 Manuel utilisateur

Asante

Asante AsanteBridge 1012 Manuel utilisateur

FireBrick

FireBrick FB2700 Manuel utilisateur

Audiovox Electronics

Audiovox Electronics ARWH2T Manuel utilisateur

ADC

ADC DSX-1 Manuel

NetComm

NetComm NF2 Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 5620 Manuel utilisateur

Dell EMC

Dell EMC XC6420 Series Manuel utilisateur

Lanner

Lanner NCA-1020A Manuel utilisateur

Allied Telesis

Allied Telesis AT-TN121-A Manuel utilisateur

Arista

Arista CCA-ETM-Q12 Manuel utilisateur

Lanner

Lanner NCA-1525 Manuel utilisateur