Master cool 52225-MED Manuel utilisateur

Table des matières

Autres manuels Master cool Thermomètre

Master cool

Master cool 52228 Manuel utilisateur

Master cool

Master cool 52234-BT Manuel utilisateur

Master cool

Master cool 52228 Manuel utilisateur

Master cool

Master cool 52224-CC Manuel utilisateur

Master cool

Master cool 52225-B Manuel utilisateur

Master cool

Master cool 52229 Manuel utilisateur

Master cool

Master cool 52226 Manuel utilisateur

Master cool

Master cool 52225-A Manuel utilisateur

Master cool

Master cool 52234-BT Manuel utilisateur

Master cool

Master cool 52228 Manuel utilisateur

Master cool

Master cool 52224-C Manuel utilisateur

Master cool

Master cool 52224-C Manuel utilisateur

Master cool

Master cool 52229 Manuel utilisateur

Master cool

Master cool 52224-D Manuel utilisateur

Manuels Thermomètre populaires d'autres marques

Delton

Delton 981A Manuel utilisateur

Baker

Baker MM2P Manuel utilisateur

Tarmo

Tarmo 320281 Manuel utilisateur

Citizen

Citizen CTD 504 Manuel utilisateur

TFA

TFA 14.1500 Manuel utilisateur

Vive

Vive DMD1010 Manuel utilisateur

Gotemp

Gotemp THB4002 Manuel utilisateur

GREISINGER

GREISINGER G 1202 Manuel utilisateur

Amprobe

Amprobe TMD-53W Manuel utilisateur

Trotec

Trotec BP10 Manuel utilisateur

Radiance instruments

Radiance instruments RT616 Series Manuel utilisateur

Eurolec

Eurolec IR151 Manuel utilisateur

Scaneo

Scaneo TS42B Manuel utilisateur

Sper scientific

Sper scientific 800043 Manuel utilisateur

Microlife

Microlife NC 200 Mode d’emploi

Motorola

Motorola MBP69SN Guide de configuration

The MeatStick

The MeatStick The MeatStick Manuel utilisateur

Hama

Hama TH35-A Manuel utilisateur

1www.mastercool.com

Deutsch

Français

Español

Italiano

Nederlands

English

Portuguese

OPERATING INSTRUCTIONS

MULTI-FUNCTION MEDICAL/SURFACE INFRARED THERMOMETER 52225-MED

BEDIENUNGSANLEITUNG

MEDIZINISCHES MULTIFUNKTIONS-/OBERFLÄCHEN-INFRAROT-THERMOMETER 52225-MED

MANUEL D’OPÉRATION

THERMOMÈTRE INFRAROUGE MULTIFONCTION MÉDICAL/SURFACE 52225-MED

INSTRUCCIONES DE OPERACION

TERMOMETRO INFRAROJO MEDICO/SUPERFICIE MULTIFUNCIONAL 52225-MED

ISTRUZIONI PER L’USO

TERMOMETRO MEDICO/A CONTATTO MULTI-FUNZIONE A INFRAROSSI 52225-MED

HANDLEIDING

MULTIFUNCTIONELE MEDISCHE/OPPERVLAKTE INFRAROOD THERMOMETER 52225-MED

MANUAL DE OPERAÇÃO

TERMÔMETRO INFRAVERMELHO MULTIFUNCIONAL PARA USO

CLÍNICO / EM SUPERFÍCIES 52225-MED

BRUKSANVISNING

MULTIFUNKTIONELL INFRARÖD TERMOMETER FÖR SJUKVÅRD/YTOR 52225-MED

Swedish

2www.mastercool.com

English

MULTI-FUNCTION MEDICAL/SURFACE INFRARED THERMOMETER

SPECIFICATIONS:

• Temperature measurement range:

Forehead mode: 93.2 to 108˚F (34 to 42.2°C)

Surface mode: -7.6 to 176˚F (-22 to 80˚C)

• Operating temperature range:

50 to 104˚F (10 to 40˚C), 15% to 85% RH

• Storage temperature range:

stored at room temperature between -4 to 122 (-20 to 50˚C), RH≤85%

Transportation temperature shall be less than 158˚F (70˚C), RH≤95%

• Atmospheric pressure: 800 to 1013 hPa

• Accuracy:

Forehead mode: ±0.4˚F (0.2˚C) within 95 to 107.6˚F (35 to 42˚C)

(Ambient Temp: 59 to 95˚F (15 to 35˚C), ±0.5˚F (0.3˚C) for other range

Surface mode: ±0.5˚F (0.3˚C) within 71.6 to 108˚F (22 to 42.2˚C), others

±4% or ±4˚F (2˚C) whichever is greater

• Battery: AAA x 2 pcs

• Battery life: around 3,000 continuous readings

• Expected Service Life: 4 years

• Blue LED Backlight: automatically turned on after measurement, and automatically turned off after 5 seconds

• Enclosure Rating: IP22

NOTE: The thermometer is calibrated at the time of manufacturing. If you question calibration mode, the accuracy of

temperature measurements or unexpected events at any time, please contact the service department.

Warning: No modiﬁcation of this equipment is allowed.

Warning: Do not submerge device into any liquids or expose to direct moisture.

FUNCTIONS

FOREHEAD TEMPERATURE:

This thermometer is not meant to replace a visit to the doctor. Please also remember to compare the

measurement result to your regular body temperature. Please consult with a doctor if you have health

concerns.

• Please see the “USING THE THERMOMETER” section to learn how to measure the body

temperature.

THD2FE Non-contact Forehead Thermometer

Functions

Forehead temperature

The thermometer has been designed for home use. It’s not meant to replace a visit to the

doctor. Please also remember to compare the measurement result to your regular body

temperature. Please consult with doctor if you have health concerns.

àPlease see the “Use of the thermometer” section to learn how to measure the body

temperature.

Surface temperature

The surface mode shows the actual and unadjusted surface temperature which is different from

the body temperature. It can help you monitor if the object temperature is suitable for the baby

or patient, for example the baby’s milk.

àPlease see the “Use of the thermometer” section to learn how to measure the object

temperature.

Temperature indicator

If the thermometer detects a temperature ≧99.5°F (or 37.5°C) under forehead mode, three

short beep sound will follow one long beep sound to warn the user for the temperature is above

99.5°F (37.5°C).

Memory locations

There are total 25 sets of measurement condition for body temperature.

àWhen power on, press the “ON/MEM” button to see the temperature records with icon.

°F / °C switch

In “Power Off” mode, press and hold the “START” button, then press the “ON/MEM” button for

3 seconds, icon “°F” will be switched to icon “°C”. You can also use the same process to

change the LCD display from °C to °F.

NOTE: Memory clear and Celsius/Fahrenheit switch are together. When you switch Celsius and

Fahrenheit, the Memory will be cleared.

Mute mode

The device setting with buzzer is on, you can set buzzer on/off under Mute mode.

When power on, press and hold the “ON/MEM” button for 3 seconds. The icon will flash on

the LCD screen and then release the “ON/MEM” button to set MUTE. Thus you will not hear

beep sounds. You can also use the same process to turn off the Mute function.

NOTE: If keep pressing "ON/MEN" button for 2 seconds after icon flashing, the device will

be power off WITHOUT setting Mute.

Use of the thermometer

Note: If there is any temperature difference between the places where the device is stored and where you are going to measure, subject and the device should

stay in the same room for at least 15 minutes before measurement.

1. Always make sure the probe lens is clean without any damage and the forehead is clean.

Warning: Choking from swallowing small parts and batteries by children or pets is possible, please keep small parts and batteries at places where

children and pets can’t reach.

2. Power on:

Press the “ON/MEM” button (see figure 1).

3. Measuring body temperature on the forehead:

Indications for use:

The Non-contact Clinical Thermometer, Model THD2FE is an infrared thermometer intended

for the intermittent measurement of human body temperature in people of all ages.

Intended operator:

At least 11 years old (5 years intensive reading experience), no maximum.

Specifications

þ Temperature measurement range:

Forehead mode: 93.2~108°F (34~42.2°C)

Surface mode: -7.6~176°F (-22~80°C)

þ Operating temperature range: 50~104°F (10~40°C), 15%~85% RH

þ Storage temperature range: It should be stored at room temperature between -4~122°F

(-20~+50°C), RH≦85%

Transportation temperature shall be less than 158°F (70°C), RH≦95%

þ Atmospheric pressure: 800~1013 hPa

þ Comply with ASTM E1965-98, EN ISO 80601-2-56, IEC/EN60601-1-2(EMC),

IEC/EN60601-1(Safety) standards, ISO10993, RoHS.

þ Accuracy:

Forehead mode: ±0.4 oF (0.2 °C ) within 95~107.6°F (35~42°C),

±0.5 oF (0.3 °C ) for other range.

Surface mode: ±0.5°F (0.3°C) within 71.6~108°F (22~42.2°C),

others ±4% or ±4°F (2°C) whichever is greater.

þ Temperature indicator, memory and °F / °C switch function

þ Battery: AAA x 2 pcs

þ Battery life: around 3,000 continuous readings.

þ Expected Service Life: 4 years

þ This thermometer converts the forehead temperature to display its “oral equivalent.”

(according to the result of the clinical evaluation to get the offset value)

þ Blue LED Backlight

Blue LED backlight will be automatically turned on after measurement, and automatically

turned off after 2 seconds.

þ Enclosure Rating: IP22

þ Dimensions: 158.0 x 48.0 x 40.2 mm

þ Weight: 100 grams including battery

The device should not submerge into any liquids and expose it to direct moisture.

There is no gender and age limitation for using the infrared thermometer.

This is not an AP or APG product.

Figure 1

SURFACE TEMPERATURE:

The surface mode shows the actual and unadjusted surface temperature which is different from the

body temperature.

• Please see the “USING THE THERMOMETER” section to learn how to measure the object

temperature.

THD2FE Non-contact Forehead Thermometer

Functions

Forehead temperature

The thermometer has been designed for home use. It’s not meant to replace a visit to the

doctor. Please also remember to compare the measurement result to your regular body

temperature. Please consult with doctor if you have health concerns.

àPlease see the “Use of the thermometer” section to learn how to measure the body

temperature.

Surface temperature

The surface mode shows the actual and unadjusted surface temperature which is different from

the body temperature. It can help you monitor if the object temperature is suitable for the baby

or patient, for example the baby’s milk.

àPlease see the “Use of the thermometer” section to learn how to measure the object

temperature.

Temperature indicator

If the thermometer detects a temperature ≧99.5°F (or 37.5°C) under forehead mode, three

short beep sound will follow one long beep sound to warn the user for the temperature is above

99.5°F (37.5°C).

Memory locations

There are total 25 sets of measurement condition for body temperature.

àWhen power on, press the “ON/MEM” button to see the temperature records with icon.

°F / °C switch

In “Power Off” mode, press and hold the “START” button, then press the “ON/MEM” button for

3 seconds, icon “°F” will be switched to icon “°C”. You can also use the same process to

change the LCD display from °C to °F.

NOTE: Memory clear and Celsius/Fahrenheit switch are together. When you switch Celsius and

Fahrenheit, the Memory will be cleared.

Mute mode

The device setting with buzzer is on, you can set buzzer on/off under Mute mode.

When power on, press and hold the “ON/MEM” button for 3 seconds. The icon will flash on

the LCD screen and then release the “ON/MEM” button to set MUTE. Thus you will not hear

beep sounds. You can also use the same process to turn off the Mute function.

NOTE: If keep pressing "ON/MEN" button for 2 seconds after icon flashing, the device will

be power off WITHOUT setting Mute.

Use of the thermometer

Note: If there is any temperature difference between the places where the device is stored and where you are going to measure, subject and the device should

stay in the same room for at least 15 minutes before measurement.

1. Always make sure the probe lens is clean without any damage and the forehead is clean.

Warning: Choking from swallowing small parts and batteries by children or pets is possible, please keep small parts and batteries at places where

children and pets can’t reach.

2. Power on:

Press the “ON/MEM” button (see figure 1).

3. Measuring body temperature on the forehead:

Indications for use:

The Non-contact Clinical Thermometer, Model THD2FE is an infrared thermometer intended

for the intermittent measurement of human body temperature in people of all ages.

Intended operator:

At least 11 years old (5 years intensive reading experience), no maximum.

Specifications

þ Temperature measurement range:

Forehead mode: 93.2~108°F (34~42.2°C)

Surface mode: -7.6~176°F (-22~80°C)

þ Operating temperature range: 50~104°F (10~40°C), 15%~85% RH

þ Storage temperature range: It should be stored at room temperature between -4~122°F

(-20~+50°C), RH≦85%

Transportation temperature shall be less than 158°F (70°C), RH≦95%

þ Atmospheric pressure: 800~1013 hPa

þ Comply with ASTM E1965-98, EN ISO 80601-2-56, IEC/EN60601-1-2(EMC),

IEC/EN60601-1(Safety) standards, ISO10993, RoHS.

þ Accuracy:

Forehead mode: ±0.4 oF (0.2 °C ) within 95~107.6°F (35~42°C),

±0.5 oF (0.3 °C ) for other range.

Surface mode: ±0.5°F (0.3°C) within 71.6~108°F (22~42.2°C),

others ±4% or ±4°F (2°C) whichever is greater.

þ Temperature indicator, memory and °F / °C switch function

þ Battery: AAA x 2 pcs

þ Battery life: around 3,000 continuous readings.

þ Expected Service Life: 4 years

þ This thermometer converts the forehead temperature to display its “oral equivalent.”

(according to the result of the clinical evaluation to get the offset value)

þ Blue LED Backlight

Blue LED backlight will be automatically turned on after measurement, and automatically

turned off after 2 seconds.

þ Enclosure Rating: IP22

þ Dimensions: 158.0 x 48.0 x 40.2 mm

þ Weight: 100 grams including battery

The device should not submerge into any liquids and expose it to direct moisture.

There is no gender and age limitation for using the infrared thermometer.

This is not an AP or APG product.

Figure 1

TEMPERATURE INDICATOR:

If the thermometer detects a temperature ≥99.5°F (or 37.5°C) under forehead mode, three short

beeps will sound followed by one long beep to warn the user that the temperature is above 99.5°F

(37.5°C).

THD2FE Non-contact Forehead Thermometer

Functions

Forehead temperature

The thermometer has been designed for home use. It’s not meant to replace a visit to the

doctor. Please also remember to compare the measurement result to your regular body

temperature. Please consult with doctor if you have health concerns.

àPlease see the “Use of the thermometer” section to learn how to measure the body

temperature.

Surface temperature

The surface mode shows the actual and unadjusted surface temperature which is different from

the body temperature. It can help you monitor if the object temperature is suitable for the baby

or patient, for example the baby’s milk.

àPlease see the “Use of the thermometer” section to learn how to measure the object

temperature.

Temperature indicator

If the thermometer detects a temperature ≧99.5°F (or 37.5°C) under forehead mode, three

short beep sound will follow one long beep sound to warn the user for the temperature is above

99.5°F (37.5°C).

Memory locations

There are total 25 sets of measurement condition for body temperature.

àWhen power on, press the “ON/MEM” button to see the temperature records with icon.

°F / °C switch

In “Power Off” mode, press and hold the “START” button, then press the “ON/MEM” button for

3 seconds, icon “°F” will be switched to icon “°C”. You can also use the same process to

change the LCD display from °C to °F.

NOTE: Memory clear and Celsius/Fahrenheit switch are together. When you switch Celsius and

Fahrenheit, the Memory will be cleared.

Mute mode

The device setting with buzzer is on, you can set buzzer on/off under Mute mode.

When power on, press and hold the “ON/MEM” button for 3 seconds. The icon will flash on

the LCD screen and then release the “ON/MEM” button to set MUTE. Thus you will not hear

beep sounds. You can also use the same process to turn off the Mute function.

NOTE: If keep pressing "ON/MEN" button for 2 seconds after icon flashing, the device will

be power off WITHOUT setting Mute.

Use of the thermometer

Note: If there is any temperature difference between the places where the device is stored and where you are going to measure, subject and the device should

stay in the same room for at least 15 minutes before measurement.

1. Always make sure the probe lens is clean without any damage and the forehead is clean.

Warning: Choking from swallowing small parts and batteries by children or pets is possible, please keep small parts and batteries at places where

children and pets can’t reach.

2. Power on:

Press the “ON/MEM” button (see figure 1).

3. Measuring body temperature on the forehead:

Indications for use:

The Non-contact Clinical Thermometer, Model THD2FE is an infrared thermometer intended

for the intermittent measurement of human body temperature in people of all ages.

Intended operator:

At least 11 years old (5 years intensive reading experience), no maximum.

Specifications

þ Temperature measurement range:

Forehead mode: 93.2~108°F (34~42.2°C)

Surface mode: -7.6~176°F (-22~80°C)

þ Operating temperature range: 50~104°F (10~40°C), 15%~85% RH

þ Storage temperature range: It should be stored at room temperature between -4~122°F

(-20~+50°C), RH≦85%

Transportation temperature shall be less than 158°F (70°C), RH≦95%

þ Atmospheric pressure: 800~1013 hPa

þ Comply with ASTM E1965-98, EN ISO 80601-2-56, IEC/EN60601-1-2(EMC),

IEC/EN60601-1(Safety) standards, ISO10993, RoHS.

þ Accuracy:

Forehead mode: ±0.4 oF (0.2 °C ) within 95~107.6°F (35~42°C),

±0.5 oF (0.3 °C ) for other range.

Surface mode: ±0.5°F (0.3°C) within 71.6~108°F (22~42.2°C),

others ±4% or ±4°F (2°C) whichever is greater.

þ Temperature indicator, memory and °F / °C switch function

þ Battery: AAA x 2 pcs

þ Battery life: around 3,000 continuous readings.

þ Expected Service Life: 4 years

þ This thermometer converts the forehead temperature to display its “oral equivalent.”

(according to the result of the clinical evaluation to get the offset value)

þ Blue LED Backlight

Blue LED backlight will be automatically turned on after measurement, and automatically

turned off after 2 seconds.

þ Enclosure Rating: IP22

þ Dimensions: 158.0 x 48.0 x 40.2 mm

þ Weight: 100 grams including battery

The device should not submerge into any liquids and expose it to direct moisture.

There is no gender and age limitation for using the infrared thermometer.

This is not an AP or APG product.

Figure 1

MEMORY LOCATIONS:

There are 25 sets of measurement conditions for body temperature.

• When power is on, press the “ON/MEM” button to see the temperature records with

THD2FE Non-contact Forehead Thermometer

Functions

Forehead temperature

The thermometer has been designed for home use. It’s not meant to replace a visit to the

doctor. Please also remember to compare the measurement result to your regular body

temperature. Please consult with doctor if you have health concerns.

àPlease see the “Use of the thermometer” section to learn how to measure the body

temperature.

Surface temperature

The surface mode shows the actual and unadjusted surface temperature which is different from

the body temperature. It can help you monitor if the object temperature is suitable for the baby

or patient, for example the baby’s milk.

àPlease see the “Use of the thermometer” section to learn how to measure the object

temperature.

Temperature indicator

If the thermometer detects a temperature ≧99.5°F (or 37.5°C) under forehead mode, three

short beep sound will follow one long beep sound to warn the user for the temperature is above

99.5°F (37.5°C).

Memory locations

There are total 25 sets of measurement condition for body temperature.

àWhen power on, press the “ON/MEM” button to see the temperature records with icon.

°F / °C switch

In “Power Off” mode, press and hold the “START” button, then press the “ON/MEM” button for

3 seconds, icon “°F” will be switched to icon “°C”. You can also use the same process to

change the LCD display from °C to °F.

NOTE: Memory clear and Celsius/Fahrenheit switch are together. When you switch Celsius and

Fahrenheit, the Memory will be cleared.

Mute mode

The device setting with buzzer is on, you can set buzzer on/off under Mute mode.

When power on, press and hold the “ON/MEM” button for 3 seconds. The icon will flash on

the LCD screen and then release the “ON/MEM” button to set MUTE. Thus you will not hear

beep sounds. You can also use the same process to turn off the Mute function.

NOTE: If keep pressing "ON/MEN" button for 2 seconds after icon flashing, the device will

be power off WITHOUT setting Mute.

Use of the thermometer

Note: If there is any temperature difference between the places where the device is stored and where you are going to measure, subject and the device should

stay in the same room for at least 15 minutes before measurement.

1. Always make sure the probe lens is clean without any damage and the forehead is clean.

Warning: Choking from swallowing small parts and batteries by children or pets is possible, please keep small parts and batteries at places where

children and pets can’t reach.

2. Power on:

Press the “ON/MEM” button (see figure 1).

3. Measuring body temperature on the forehead:

Indications for use:

The Non-contact Clinical Thermometer, Model THD2FE is an infrared thermometer intended

for the intermittent measurement of human body temperature in people of all ages.

Intended operator:

At least 11 years old (5 years intensive reading experience), no maximum.

Specifications

þ Temperature measurement range:

Forehead mode: 93.2~108°F (34~42.2°C)

Surface mode: -7.6~176°F (-22~80°C)

þ Operating temperature range: 50~104°F (10~40°C), 15%~85% RH

þ Storage temperature range: It should be stored at room temperature between -4~122°F

(-20~+50°C), RH≦85%

Transportation temperature shall be less than 158°F (70°C), RH≦95%

þ Atmospheric pressure: 800~1013 hPa

þ Comply with ASTM E1965-98, EN ISO 80601-2-56, IEC/EN60601-1-2(EMC),

IEC/EN60601-1(Safety) standards, ISO10993, RoHS.

þ Accuracy:

Forehead mode: ±0.4 oF (0.2 °C ) within 95~107.6°F (35~42°C),

±0.5 oF (0.3 °C ) for other range.

Surface mode: ±0.5°F (0.3°C) within 71.6~108°F (22~42.2°C),

others ±4% or ±4°F (2°C) whichever is greater.

þ Temperature indicator, memory and °F / °C switch function

þ Battery: AAA x 2 pcs

þ Battery life: around 3,000 continuous readings.

þ Expected Service Life: 4 years

þ This thermometer converts the forehead temperature to display its “oral equivalent.”

(according to the result of the clinical evaluation to get the offset value)

þ Blue LED Backlight

Blue LED backlight will be automatically turned on after measurement, and automatically

turned off after 2 seconds.

þ Enclosure Rating: IP22

þ Dimensions: 158.0 x 48.0 x 40.2 mm

þ Weight: 100 grams including battery

The device should not submerge into any liquids and expose it to direct moisture.

There is no gender and age limitation for using the infrared thermometer.

This is not an AP or APG product.

Figure 1

icon.

THD2FE Non-contact Forehead Thermometer

Functions

Forehead temperature

The thermometer has been designed for home use. It’s not meant to replace a visit to the

doctor. Please also remember to compare the measurement result to your regular body

temperature. Please consult with doctor if you have health concerns.

àPlease see the “Use of the thermometer” section to learn how to measure the body

temperature.

Surface temperature

The surface mode shows the actual and unadjusted surface temperature which is different from

the body temperature. It can help you monitor if the object temperature is suitable for the baby

or patient, for example the baby’s milk.

àPlease see the “Use of the thermometer” section to learn how to measure the object

temperature.

Temperature indicator

If the thermometer detects a temperature ≧99.5°F (or 37.5°C) under forehead mode, three

short beep sound will follow one long beep sound to warn the user for the temperature is above

99.5°F (37.5°C).

Memory locations

There are total 25 sets of measurement condition for body temperature.

àWhen power on, press the “ON/MEM” button to see the temperature records with icon.

°F / °C switch

In “Power Off” mode, press and hold the “START” button, then press the “ON/MEM” button for

3 seconds, icon “°F” will be switched to icon “°C”. You can also use the same process to

change the LCD display from °C to °F.

NOTE: Memory clear and Celsius/Fahrenheit switch are together. When you switch Celsius and

Fahrenheit, the Memory will be cleared.

Mute mode

The device setting with buzzer is on, you can set buzzer on/off under Mute mode.

When power on, press and hold the “ON/MEM” button for 3 seconds. The icon will flash on

the LCD screen and then release the “ON/MEM” button to set MUTE. Thus you will not hear

beep sounds. You can also use the same process to turn off the Mute function.

NOTE: If keep pressing "ON/MEN" button for 2 seconds after icon flashing, the device will

be power off WITHOUT setting Mute.

Use of the thermometer

Note: If there is any temperature difference between the places where the device is stored and where you are going to measure, subject and the device should

stay in the same room for at least 15 minutes before measurement.

1. Always make sure the probe lens is clean without any damage and the forehead is clean.

Warning: Choking from swallowing small parts and batteries by children or pets is possible, please keep small parts and batteries at places where

children and pets can’t reach.

2. Power on:

Press the “ON/MEM” button (see figure 1).

3. Measuring body temperature on the forehead:

Indications for use:

The Non-contact Clinical Thermometer, Model THD2FE is an infrared thermometer intended

for the intermittent measurement of human body temperature in people of all ages.

Intended operator:

At least 11 years old (5 years intensive reading experience), no maximum.

Specifications

þ Temperature measurement range:

Forehead mode: 93.2~108°F (34~42.2°C)

Surface mode: -7.6~176°F (-22~80°C)

þ Operating temperature range: 50~104°F (10~40°C), 15%~85% RH

þ Storage temperature range: It should be stored at room temperature between -4~122°F

(-20~+50°C), RH≦85%

Transportation temperature shall be less than 158°F (70°C), RH≦95%

þ Atmospheric pressure: 800~1013 hPa

þ Comply with ASTM E1965-98, EN ISO 80601-2-56, IEC/EN60601-1-2(EMC),

IEC/EN60601-1(Safety) standards, ISO10993, RoHS.

þ Accuracy:

Forehead mode: ±0.4 oF (0.2 °C ) within 95~107.6°F (35~42°C),

±0.5 oF (0.3 °C ) for other range.

Surface mode: ±0.5°F (0.3°C) within 71.6~108°F (22~42.2°C),

others ±4% or ±4°F (2°C) whichever is greater.

þ Temperature indicator, memory and °F / °C switch function

þ Battery: AAA x 2 pcs

þ Battery life: around 3,000 continuous readings.

þ Expected Service Life: 4 years

þ This thermometer converts the forehead temperature to display its “oral equivalent.”

(according to the result of the clinical evaluation to get the offset value)

þ Blue LED Backlight

Blue LED backlight will be automatically turned on after measurement, and automatically

turned off after 2 seconds.

þ Enclosure Rating: IP22

þ Dimensions: 158.0 x 48.0 x 40.2 mm

þ Weight: 100 grams including battery

The device should not submerge into any liquids and expose it to direct moisture.

There is no gender and age limitation for using the infrared thermometer.

This is not an AP or APG product.

Figure 1

START

STAND-BY

(ON-MEM)

LCD

BATTERY

COVER

PROBE

LENS

3www.mastercool.com

˚F / ˚C: In “power off” mode, press and hold the “START” button, then press the “ON/MEM” button for 3

seconds, the “˚F” icon will be switched to the “˚C” icon. You can also use the same process to change

the LCD display from ˚C to ˚F.

NOTE: Memory clear and celsius/fahrenheit switch are together. When you switch celsius and

fahrenheit, the memory will be cleared.

THD2FE Non-contact Forehead Thermometer

Functions

Forehead temperature

The thermometer has been designed for home use. It’s not meant to replace a visit to the

doctor. Please also remember to compare the measurement result to your regular body

temperature. Please consult with doctor if you have health concerns.

àPlease see the “Use of the thermometer” section to learn how to measure the body

temperature.

Surface temperature

The surface mode shows the actual and unadjusted surface temperature which is different from

the body temperature. It can help you monitor if the object temperature is suitable for the baby

or patient, for example the baby’s milk.

àPlease see the “Use of the thermometer” section to learn how to measure the object

temperature.

Temperature indicator

If the thermometer detects a temperature ≧99.5°F (or 37.5°C) under forehead mode, three

short beep sound will follow one long beep sound to warn the user for the temperature is above

99.5°F (37.5°C).

Memory locations

There are total 25 sets of measurement condition for body temperature.

àWhen power on, press the “ON/MEM” button to see the temperature records with icon.

°F / °C switch

In “Power Off” mode, press and hold the “START” button, then press the “ON/MEM” button for

3 seconds, icon “°F” will be switched to icon “°C”. You can also use the same process to

change the LCD display from °C to °F.

NOTE: Memory clear and Celsius/Fahrenheit switch are together. When you switch Celsius and

Fahrenheit, the Memory will be cleared.

Mute mode

The device setting with buzzer is on, you can set buzzer on/off under Mute mode.

When power on, press and hold the “ON/MEM” button for 3 seconds. The icon will flash on

the LCD screen and then release the “ON/MEM” button to set MUTE. Thus you will not hear

beep sounds. You can also use the same process to turn off the Mute function.

NOTE: If keep pressing "ON/MEN" button for 2 seconds after icon flashing, the device will

be power off WITHOUT setting Mute.

Use of the thermometer

Note: If there is any temperature difference between the places where the device is stored and where you are going to measure, subject and the device should

stay in the same room for at least 15 minutes before measurement.

1. Always make sure the probe lens is clean without any damage and the forehead is clean.

Warning: Choking from swallowing small parts and batteries by children or pets is possible, please keep small parts and batteries at places where

children and pets can’t reach.

2. Power on:

Press the “ON/MEM” button (see figure 1).

3. Measuring body temperature on the forehead:

Indications for use:

The Non-contact Clinical Thermometer, Model THD2FE is an infrared thermometer intended

for the intermittent measurement of human body temperature in people of all ages.

Intended operator:

At least 11 years old (5 years intensive reading experience), no maximum.

Specifications

þ Temperature measurement range:

Forehead mode: 93.2~108°F (34~42.2°C)

Surface mode: -7.6~176°F (-22~80°C)

þ Operating temperature range: 50~104°F (10~40°C), 15%~85% RH

þ Storage temperature range: It should be stored at room temperature between -4~122°F

(-20~+50°C), RH≦85%

Transportation temperature shall be less than 158°F (70°C), RH≦95%

þ Atmospheric pressure: 800~1013 hPa

þ Comply with ASTM E1965-98, EN ISO 80601-2-56, IEC/EN60601-1-2(EMC),

IEC/EN60601-1(Safety) standards, ISO10993, RoHS.

þ Accuracy:

Forehead mode: ±0.4 oF (0.2 °C ) within 95~107.6°F (35~42°C),

±0.5 oF (0.3 °C ) for other range.

Surface mode: ±0.5°F (0.3°C) within 71.6~108°F (22~42.2°C),

others ±4% or ±4°F (2°C) whichever is greater.

þ Temperature indicator, memory and °F / °C switch function

þ Battery: AAA x 2 pcs

þ Battery life: around 3,000 continuous readings.

þ Expected Service Life: 4 years

þ This thermometer converts the forehead temperature to display its “oral equivalent.”

(according to the result of the clinical evaluation to get the offset value)

þ Blue LED Backlight

Blue LED backlight will be automatically turned on after measurement, and automatically

turned off after 2 seconds.

þ Enclosure Rating: IP22

þ Dimensions: 158.0 x 48.0 x 40.2 mm

þ Weight: 100 grams including battery

The device should not submerge into any liquids and expose it to direct moisture.

There is no gender and age limitation for using the infrared thermometer.

This is not an AP or APG product.

Figure 1

THD2FE Non-contact Forehead Thermometer

Functions

Forehead temperature

The thermometer has been designed for home use. It’s not meant to replace a visit to the

doctor. Please also remember to compare the measurement result to your regular body

temperature. Please consult with doctor if you have health concerns.

àPlease see the “Use of the thermometer” section to learn how to measure the body

temperature.

Surface temperature

The surface mode shows the actual and unadjusted surface temperature which is different from

the body temperature. It can help you monitor if the object temperature is suitable for the baby

or patient, for example the baby’s milk.

àPlease see the “Use of the thermometer” section to learn how to measure the object

temperature.

Temperature indicator

If the thermometer detects a temperature ≧99.5°F (or 37.5°C) under forehead mode, three

short beep sound will follow one long beep sound to warn the user for the temperature is above

99.5°F (37.5°C).

Memory locations

There are total 25 sets of measurement condition for body temperature.

àWhen power on, press the “ON/MEM” button to see the temperature records with icon.

°F / °C switch

In “Power Off” mode, press and hold the “START” button, then press the “ON/MEM” button for

3 seconds, icon “°F” will be switched to icon “°C”. You can also use the same process to

change the LCD display from °C to °F.

NOTE: Memory clear and Celsius/Fahrenheit switch are together. When you switch Celsius and

Fahrenheit, the Memory will be cleared.

Mute mode

The device setting with buzzer is on, you can set buzzer on/off under Mute mode.

When power on, press and hold the “ON/MEM” button for 3 seconds. The icon will flash on

the LCD screen and then release the “ON/MEM” button to set MUTE. Thus you will not hear

beep sounds. You can also use the same process to turn off the Mute function.

NOTE: If keep pressing "ON/MEN" button for 2 seconds after icon flashing, the device will

be power off WITHOUT setting Mute.

Use of the thermometer

Note: If there is any temperature difference between the places where the device is stored and where you are going to measure, subject and the device should

stay in the same room for at least 15 minutes before measurement.

1. Always make sure the probe lens is clean without any damage and the forehead is clean.

Warning: Choking from swallowing small parts and batteries by children or pets is possible, please keep small parts and batteries at places where

children and pets can’t reach.

2. Power on:

Press the “ON/MEM” button (see figure 1).

3. Measuring body temperature on the forehead:

Indications for use:

The Non-contact Clinical Thermometer, Model THD2FE is an infrared thermometer intended

for the intermittent measurement of human body temperature in people of all ages.

Intended operator:

At least 11 years old (5 years intensive reading experience), no maximum.

Specifications

þ Temperature measurement range:

Forehead mode: 93.2~108°F (34~42.2°C)

Surface mode: -7.6~176°F (-22~80°C)

þ Operating temperature range: 50~104°F (10~40°C), 15%~85% RH

þ Storage temperature range: It should be stored at room temperature between -4~122°F

(-20~+50°C), RH≦85%

Transportation temperature shall be less than 158°F (70°C), RH≦95%

þ Atmospheric pressure: 800~1013 hPa

þ Comply with ASTM E1965-98, EN ISO 80601-2-56, IEC/EN60601-1-2(EMC),

IEC/EN60601-1(Safety) standards, ISO10993, RoHS.

þ Accuracy:

Forehead mode: ±0.4 oF (0.2 °C ) within 95~107.6°F (35~42°C),

±0.5 oF (0.3 °C ) for other range.

Surface mode: ±0.5°F (0.3°C) within 71.6~108°F (22~42.2°C),

others ±4% or ±4°F (2°C) whichever is greater.

þ Temperature indicator, memory and °F / °C switch function

þ Battery: AAA x 2 pcs

þ Battery life: around 3,000 continuous readings.

þ Expected Service Life: 4 years

þ This thermometer converts the forehead temperature to display its “oral equivalent.”

(according to the result of the clinical evaluation to get the offset value)

þ Blue LED Backlight

Blue LED backlight will be automatically turned on after measurement, and automatically

turned off after 2 seconds.

þ Enclosure Rating: IP22

þ Dimensions: 158.0 x 48.0 x 40.2 mm

þ Weight: 100 grams including battery

The device should not submerge into any liquids and expose it to direct moisture.

There is no gender and age limitation for using the infrared thermometer.

This is not an AP or APG product.

Figure 1

MUTE MODE:

The device is set with the sound on, you can set the sound on/off under mute mode.

When power is on, press and hold the “ON/MEM” button for 3 seconds. The

THD2FE Non-contact Forehead Thermometer

Functions

Forehead temperature

The thermometer has been designed for home use. It’s not meant to replace a visit to the

doctor. Please also remember to compare the measurement result to your regular body

temperature. Please consult with doctor if you have health concerns.

àPlease see the “Use of the thermometer” section to learn how to measure the body

temperature.

Surface temperature

The surface mode shows the actual and unadjusted surface temperature which is different from

the body temperature. It can help you monitor if the object temperature is suitable for the baby

or patient, for example the baby’s milk.

àPlease see the “Use of the thermometer” section to learn how to measure the object

temperature.

Temperature indicator

If the thermometer detects a temperature ≧99.5°F (or 37.5°C) under forehead mode, three

short beep sound will follow one long beep sound to warn the user for the temperature is above

99.5°F (37.5°C).

Memory locations

There are total 25 sets of measurement condition for body temperature.

àWhen power on, press the “ON/MEM” button to see the temperature records with icon.

°F / °C switch

In “Power Off” mode, press and hold the “START” button, then press the “ON/MEM” button for

3 seconds, icon “°F” will be switched to icon “°C”. You can also use the same process to

change the LCD display from °C to °F.

NOTE: Memory clear and Celsius/Fahrenheit switch are together. When you switch Celsius and

Fahrenheit, the Memory will be cleared.

Mute mode

The device setting with buzzer is on, you can set buzzer on/off under Mute mode.

When power on, press and hold the “ON/MEM” button for 3 seconds. The icon will flash on

the LCD screen and then release the “ON/MEM” button to set MUTE. Thus you will not hear

beep sounds. You can also use the same process to turn off the Mute function.

NOTE: If keep pressing "ON/MEN" button for 2 seconds after icon flashing, the device will

be power off WITHOUT setting Mute.

Use of the thermometer

Note: If there is any temperature difference between the places where the device is stored and where you are going to measure, subject and the device should

stay in the same room for at least 15 minutes before measurement.

1. Always make sure the probe lens is clean without any damage and the forehead is clean.

Warning: Choking from swallowing small parts and batteries by children or pets is possible, please keep small parts and batteries at places where

children and pets can’t reach.

2. Power on:

Press the “ON/MEM” button (see figure 1).

3. Measuring body temperature on the forehead:

Indications for use:

The Non-contact Clinical Thermometer, Model THD2FE is an infrared thermometer intended

for the intermittent measurement of human body temperature in people of all ages.

Intended operator:

At least 11 years old (5 years intensive reading experience), no maximum.

Specifications

þ Temperature measurement range:

Forehead mode: 93.2~108°F (34~42.2°C)

Surface mode: -7.6~176°F (-22~80°C)

þ Operating temperature range: 50~104°F (10~40°C), 15%~85% RH

þ Storage temperature range: It should be stored at room temperature between -4~122°F

(-20~+50°C), RH≦85%

Transportation temperature shall be less than 158°F (70°C), RH≦95%

þ Atmospheric pressure: 800~1013 hPa

þ Comply with ASTM E1965-98, EN ISO 80601-2-56, IEC/EN60601-1-2(EMC),

IEC/EN60601-1(Safety) standards, ISO10993, RoHS.

þ Accuracy:

Forehead mode: ±0.4 oF (0.2 °C ) within 95~107.6°F (35~42°C),

±0.5 oF (0.3 °C ) for other range.

Surface mode: ±0.5°F (0.3°C) within 71.6~108°F (22~42.2°C),

others ±4% or ±4°F (2°C) whichever is greater.

þ Temperature indicator, memory and °F / °C switch function

þ Battery: AAA x 2 pcs

þ Battery life: around 3,000 continuous readings.

þ Expected Service Life: 4 years

þ This thermometer converts the forehead temperature to display its “oral equivalent.”

(according to the result of the clinical evaluation to get the offset value)

þ Blue LED Backlight

Blue LED backlight will be automatically turned on after measurement, and automatically

turned off after 2 seconds.

þ Enclosure Rating: IP22

þ Dimensions: 158.0 x 48.0 x 40.2 mm

þ Weight: 100 grams including battery

The device should not submerge into any liquids and expose it to direct moisture.

There is no gender and age limitation for using the infrared thermometer.

This is not an AP or APG product.

Figure 1

icon will ﬂash on

the LCD screen and then release the “ON/MEM” button to set mute. Thus you will not hear the beep

sounds. You can also use the same process to turn off the mute function.

NOTE: If you keep pressing “ON/MEN” button for 2 seconds after

THD2FE Non-contact Forehead Thermometer

Functions

Forehead temperature

The thermometer has been designed for home use. It’s not meant to replace a visit to the

doctor. Please also remember to compare the measurement result to your regular body

temperature. Please consult with doctor if you have health concerns.

àPlease see the “Use of the thermometer” section to learn how to measure the body

temperature.

Surface temperature

The surface mode shows the actual and unadjusted surface temperature which is different from

the body temperature. It can help you monitor if the object temperature is suitable for the baby

or patient, for example the baby’s milk.

àPlease see the “Use of the thermometer” section to learn how to measure the object

temperature.

Temperature indicator

If the thermometer detects a temperature ≧99.5°F (or 37.5°C) under forehead mode, three

short beep sound will follow one long beep sound to warn the user for the temperature is above

99.5°F (37.5°C).

Memory locations

There are total 25 sets of measurement condition for body temperature.

àWhen power on, press the “ON/MEM” button to see the temperature records with icon.

°F / °C switch

In “Power Off” mode, press and hold the “START” button, then press the “ON/MEM” button for

3 seconds, icon “°F” will be switched to icon “°C”. You can also use the same process to

change the LCD display from °C to °F.

NOTE: Memory clear and Celsius/Fahrenheit switch are together. When you switch Celsius and

Fahrenheit, the Memory will be cleared.

Mute mode

The device setting with buzzer is on, you can set buzzer on/off under Mute mode.

When power on, press and hold the “ON/MEM” button for 3 seconds. The icon will flash on

the LCD screen and then release the “ON/MEM” button to set MUTE. Thus you will not hear

beep sounds. You can also use the same process to turn off the Mute function.

NOTE: If keep pressing "ON/MEN" button for 2 seconds after icon flashing, the device will

be power off WITHOUT setting Mute.

Use of the thermometer

Note: If there is any temperature difference between the places where the device is stored and where you are going to measure, subject and the device should

stay in the same room for at least 15 minutes before measurement.

1. Always make sure the probe lens is clean without any damage and the forehead is clean.

Warning: Choking from swallowing small parts and batteries by children or pets is possible, please keep small parts and batteries at places where

children and pets can’t reach.

2. Power on:

Press the “ON/MEM” button (see figure 1).

3. Measuring body temperature on the forehead:

Indications for use:

The Non-contact Clinical Thermometer, Model THD2FE is an infrared thermometer intended

for the intermittent measurement of human body temperature in people of all ages.

Intended operator:

At least 11 years old (5 years intensive reading experience), no maximum.

Specifications

þ Temperature measurement range:

Forehead mode: 93.2~108°F (34~42.2°C)

Surface mode: -7.6~176°F (-22~80°C)

þ Operating temperature range: 50~104°F (10~40°C), 15%~85% RH

þ Storage temperature range: It should be stored at room temperature between -4~122°F

(-20~+50°C), RH≦85%

Transportation temperature shall be less than 158°F (70°C), RH≦95%

þ Atmospheric pressure: 800~1013 hPa

þ Comply with ASTM E1965-98, EN ISO 80601-2-56, IEC/EN60601-1-2(EMC),

IEC/EN60601-1(Safety) standards, ISO10993, RoHS.

þ Accuracy:

Forehead mode: ±0.4 oF (0.2 °C ) within 95~107.6°F (35~42°C),

±0.5 oF (0.3 °C ) for other range.

Surface mode: ±0.5°F (0.3°C) within 71.6~108°F (22~42.2°C),

others ±4% or ±4°F (2°C) whichever is greater.

þ Temperature indicator, memory and °F / °C switch function

þ Battery: AAA x 2 pcs

þ Battery life: around 3,000 continuous readings.

þ Expected Service Life: 4 years

þ This thermometer converts the forehead temperature to display its “oral equivalent.”

(according to the result of the clinical evaluation to get the offset value)

þ Blue LED Backlight

Blue LED backlight will be automatically turned on after measurement, and automatically

turned off after 2 seconds.

þ Enclosure Rating: IP22

þ Dimensions: 158.0 x 48.0 x 40.2 mm

þ Weight: 100 grams including battery

The device should not submerge into any liquids and expose it to direct moisture.

There is no gender and age limitation for using the infrared thermometer.

This is not an AP or APG product.

Figure 1

icon ﬂashing, the device will be

powered off WITHOUT setting mute.

THD2FE Non-contact Forehead Thermometer

Functions

Forehead temperature

The thermometer has been designed for home use. It’s not meant to replace a visit to the

doctor. Please also remember to compare the measurement result to your regular body

temperature. Please consult with doctor if you have health concerns.

àPlease see the “Use of the thermometer” section to learn how to measure the body

temperature.

Surface temperature

The surface mode shows the actual and unadjusted surface temperature which is different from

the body temperature. It can help you monitor if the object temperature is suitable for the baby

or patient, for example the baby’s milk.

àPlease see the “Use of the thermometer” section to learn how to measure the object

temperature.

Temperature indicator

If the thermometer detects a temperature ≧99.5°F (or 37.5°C) under forehead mode, three

short beep sound will follow one long beep sound to warn the user for the temperature is above

99.5°F (37.5°C).

Memory locations

There are total 25 sets of measurement condition for body temperature.

àWhen power on, press the “ON/MEM” button to see the temperature records with icon.

°F / °C switch

In “Power Off” mode, press and hold the “START” button, then press the “ON/MEM” button for

3 seconds, icon “°F” will be switched to icon “°C”. You can also use the same process to

change the LCD display from °C to °F.

NOTE: Memory clear and Celsius/Fahrenheit switch are together. When you switch Celsius and

Fahrenheit, the Memory will be cleared.

Mute mode

The device setting with buzzer is on, you can set buzzer on/off under Mute mode.

When power on, press and hold the “ON/MEM” button for 3 seconds. The icon will flash on

the LCD screen and then release the “ON/MEM” button to set MUTE. Thus you will not hear

beep sounds. You can also use the same process to turn off the Mute function.

NOTE: If keep pressing "ON/MEN" button for 2 seconds after icon flashing, the device will

be power off WITHOUT setting Mute.

Use of the thermometer

Note: If there is any temperature difference between the places where the device is stored and where you are going to measure, subject and the device should

stay in the same room for at least 15 minutes before measurement.

1. Always make sure the probe lens is clean without any damage and the forehead is clean.

Warning: Choking from swallowing small parts and batteries by children or pets is possible, please keep small parts and batteries at places where

children and pets can’t reach.

2. Power on:

Press the “ON/MEM” button (see figure 1).

3. Measuring body temperature on the forehead:

Indications for use:

The Non-contact Clinical Thermometer, Model THD2FE is an infrared thermometer intended

for the intermittent measurement of human body temperature in people of all ages.

Intended operator:

At least 11 years old (5 years intensive reading experience), no maximum.

Specifications

þ Temperature measurement range:

Forehead mode: 93.2~108°F (34~42.2°C)

Surface mode: -7.6~176°F (-22~80°C)

þ Operating temperature range: 50~104°F (10~40°C), 15%~85% RH

þ Storage temperature range: It should be stored at room temperature between -4~122°F

(-20~+50°C), RH≦85%

Transportation temperature shall be less than 158°F (70°C), RH≦95%

þ Atmospheric pressure: 800~1013 hPa

þ Comply with ASTM E1965-98, EN ISO 80601-2-56, IEC/EN60601-1-2(EMC),

IEC/EN60601-1(Safety) standards, ISO10993, RoHS.

þ Accuracy:

Forehead mode: ±0.4 oF (0.2 °C ) within 95~107.6°F (35~42°C),

±0.5 oF (0.3 °C ) for other range.

Surface mode: ±0.5°F (0.3°C) within 71.6~108°F (22~42.2°C),

others ±4% or ±4°F (2°C) whichever is greater.

þ Temperature indicator, memory and °F / °C switch function

þ Battery: AAA x 2 pcs

þ Battery life: around 3,000 continuous readings.

þ Expected Service Life: 4 years

þ This thermometer converts the forehead temperature to display its “oral equivalent.”

(according to the result of the clinical evaluation to get the offset value)

þ Blue LED Backlight

Blue LED backlight will be automatically turned on after measurement, and automatically

turned off after 2 seconds.

þ Enclosure Rating: IP22

þ Dimensions: 158.0 x 48.0 x 40.2 mm

þ Weight: 100 grams including battery

The device should not submerge into any liquids and expose it to direct moisture.

There is no gender and age limitation for using the infrared thermometer.

This is not an AP or APG product.

Figure 1

USING THE THERMOMETER

NOTE: If there is any temperature difference between the places where the device is stored and where you are going to

measure, subject and the device should stay in the same room for at least 15 minutes before measurement.

1. Always make sure the probe lens is clean and without any damage and that the forehead is clean.

Choking from swallowing small parts and batteries by children or pets is possible, please keep small parts and

batteries at places where children and pets cannot reach.

2. Power on:

Press the “ON/MEM” button (see ﬁgure 1).

THD2FE Non-contact Forehead Thermometer

Functions

Forehead temperature

The thermometer has been designed for home use. It’s not meant to replace a visit to the

doctor. Please also remember to compare the measurement result to your regular body

temperature. Please consult with doctor if you have health concerns.

àPlease see the “Use of the thermometer” section to learn how to measure the body

temperature.

Surface temperature

The surface mode shows the actual and unadjusted surface temperature which is different from

the body temperature. It can help you monitor if the object temperature is suitable for the baby

or patient, for example the baby’s milk.

àPlease see the “Use of the thermometer” section to learn how to measure the object

temperature.

Temperature indicator

If the thermometer detects a temperature ≧99.5°F (or 37.5°C) under forehead mode, three

short beep sound will follow one long beep sound to warn the user for the temperature is above

99.5°F (37.5°C).

Memory locations

There are total 25 sets of measurement condition for body temperature.

àWhen power on, press the “ON/MEM” button to see the temperature records with icon.

°F / °C switch

In “Power Off” mode, press and hold the “START” button, then press the “ON/MEM” button for

3 seconds, icon “°F” will be switched to icon “°C”. You can also use the same process to

change the LCD display from °C to °F.

NOTE: Memory clear and Celsius/Fahrenheit switch are together. When you switch Celsius and

Fahrenheit, the Memory will be cleared.

Mute mode

The device setting with buzzer is on, you can set buzzer on/off under Mute mode.

When power on, press and hold the “ON/MEM” button for 3 seconds. The icon will flash on

the LCD screen and then release the “ON/MEM” button to set MUTE. Thus you will not hear

beep sounds. You can also use the same process to turn off the Mute function.

NOTE: If keep pressing "ON/MEN" button for 2 seconds after icon flashing, the device will

be power off WITHOUT setting Mute.

Use of the thermometer

Note: If there is any temperature difference between the places where the device is stored and where you are going to measure, subject and the device should

stay in the same room for at least 15 minutes before measurement.

1. Always make sure the probe lens is clean without any damage and the forehead is clean.

Warning: Choking from swallowing small parts and batteries by children or pets is possible, please keep small parts and batteries at places where

children and pets can’t reach.

2. Power on:

Press the “ON/MEM” button (see figure 1).

3. Measuring body temperature on the forehead:

Indications for use:

The Non-contact Clinical Thermometer, Model THD2FE is an infrared thermometer intended

for the intermittent measurement of human body temperature in people of all ages.

Intended operator:

At least 11 years old (5 years intensive reading experience), no maximum.

Specifications

þ Temperature measurement range:

Forehead mode: 93.2~108°F (34~42.2°C)

Surface mode: -7.6~176°F (-22~80°C)

þ Operating temperature range: 50~104°F (10~40°C), 15%~85% RH

þ Storage temperature range: It should be stored at room temperature between -4~122°F

(-20~+50°C), RH≦85%

Transportation temperature shall be less than 158°F (70°C), RH≦95%

þ Atmospheric pressure: 800~1013 hPa

þ Comply with ASTM E1965-98, EN ISO 80601-2-56, IEC/EN60601-1-2(EMC),

IEC/EN60601-1(Safety) standards, ISO10993, RoHS.

þ Accuracy:

Forehead mode: ±0.4 oF (0.2 °C ) within 95~107.6°F (35~42°C),

±0.5 oF (0.3 °C ) for other range.

Surface mode: ±0.5°F (0.3°C) within 71.6~108°F (22~42.2°C),

others ±4% or ±4°F (2°C) whichever is greater.

þ Temperature indicator, memory and °F / °C switch function

þ Battery: AAA x 2 pcs

þ Battery life: around 3,000 continuous readings.

þ Expected Service Life: 4 years

þ This thermometer converts the forehead temperature to display its “oral equivalent.”

(according to the result of the clinical evaluation to get the offset value)

þ Blue LED Backlight

Blue LED backlight will be automatically turned on after measurement, and automatically

turned off after 2 seconds.

þ Enclosure Rating: IP22

þ Dimensions: 158.0 x 48.0 x 40.2 mm

þ Weight: 100 grams including battery

The device should not submerge into any liquids and expose it to direct moisture.

There is no gender and age limitation for using the infrared thermometer.

This is not an AP or APG product.

Figure 1

3. Measuring body temperature on the forehead:

Press the “ON/MEM” button to power on the device. Forehead mode is the default mode. You can see the

Ref No.：032020

Press the “ON/MEM” button to power on the device. Forehead mode is the default mode. You can see the icon on the screen

and hear two beep sounds (see figure 1). In this mode, you can hold the thermometer within 4 cm from the central forehead (Fig. 2) and press

the "START" button to get the forehead measurement. The time consuming for measurement might be 1 second. After each forehead

measurement, wait icon stop flashing to be ready for next measurement.

Figure 2

Points for attention:

a. Forehead temperature is displayed in oral mode. This mode converts the forehead temperature to display its “oral-equivalent” value.

b. Before the measurement, the subject should stay in a stable environment for 5 minutes and avoid exercise, bath for 30mins.

c. Remember to keep the forehead area clean and away from sweat, cosmetics and scar while taking temperature.

d. The “Clinical Bias” is -2.5 ~ -3.1°F (-1.4 ~ -1.7

C).

e. The “Limits of Agreement” is 0.98.

f. The "Repeatability" is 0.36°F(0.20

4. Measuring surface temperature:

4.1 After power on, press and hold the “ON/MEM” button, and press the “START” button one time for “Infrared thermometer” mode to see icon on your LCD

display. In this mode, you can get the target surface temperature.

4.2 When you press the “START” button, you will get the real time temperature immediately. If you press and hold the “START” button, the reading of measurement will

be continuously updated.

4.3 Applications include temperature measurements for water, milk, cloth, skin or other objects.

* Note: This mode shows the actual and unadjusted surface temperature which is different from the body temperature.

5. Power off:

5.1 Device will automatically shut off if left idle for more than 1 minute to extend battery life.

5.2 Manually power off the device by pressing the “ON/MEM” button.

Important Notes

Cleaning

And Storage

Please make sure the probe is clean to ensure an accurate reading.

The probe lens is the most delicate part of the thermometer. Use with care when cleaning the probe lens to avoid damage.

a. Use alcohol swabs or cotton swabs moistened with 70%~75% alcohol to clean the probe lens.

b. Allow the probe to fully dry for at least 1 minute.

c. Keep the unit dry and away from any liquids and direct sunlight.

d. Storage temperature range: It should be stored at room temperature between -4~122°F (-20~+50°C),RH

≦

85%

e. The Probe should not be submerged into liquids.

Holding the thermometer too long may cause a higher ambient temperature reading of the probe.

This could make the body temperature measurement lower than usual.

Battery replacement

When the “Low Battery” icon indicates the battery is low, the battery should be replaced immediately with AAA *2 pcs batteries.

1. Open the battery cover: Use the thumbs to push battery cover out. (See Figure 1)

2. Insert the new AAA *2 pcs batteries. (See Figure 2)

3. Replace the battery cover. (See Figure 3)

Trouble shooting:

Error Message

Problem

Solution

Error 5~9, the system is not functioning properly.

Unload the battery, wait for 1 minute and repower it. If the message

reappears, contact the retailer for service.

Measurement before device stabilization.

Wait for “Er1” to disappear.

The ambient temperature is not within the range between 50oF~104oF (10oC~40oC).

Allow the thermometer to rest in a room for at least 15 minutes at room

temperature: 50oF~104oF (10oC~40oC).

(1) In forehead mode: Temperature taken is higher than 108°F (+42.2oC)

(2) In surface mode: Temperature taken is higher than 176°F (+80oC)

Please select the target within specifications. If a malfunction still exists,

please contact the nearest retailer.

(1) In forehead mode: Temperature taken is lower than 93.2°F (+34oC)

(2) In surface mode: Temperature taken is lower than –7.6°F (-22oC)

Device cannot be powered on to the ready stage.

Change with a new battery.

Warranty:

Warranty: 12 months

Manufacture Date: as the serial number (please open the battery cover, it is shown on the inside of the device.)

Ex.SN:E512A000001, the first “E” is External, the second number “5” is the last number of manufacture year, the third and the fourth number “12” is the manufacture

month, the others is the serial number.

Note: The thermometer is calibrated at the time of manufacture. If you question calibration mode, the accuracy of temperature measurements or unexpected

events at any time, please contact the dealers or nearest service address.

Warning: No modification of this equipment is allowed.

Please read the instructions for use BF type applied part

Radiant Innovation Inc.

Http://www.radiantek.com.tw

Add: 1F, No.3, Industrial East 9th Road,

Science-Based Industrial Park, HsinChu, Taiwan 300.

Figure 1Figure 2Figure 3

icon on

the screen and you will hear two beep sounds (see ﬁgure 1). In this mode, you can hold the thermometer within 1.5”

(4 cm) from the central forehead and press the “START” button to get the forehead measurement. The time lapse for

measurement might be 1 second. After each forehead measurement, wait for the

Ref No.：032020

Press the “ON/MEM” button to power on the device. Forehead mode is the default mode. You can see the icon on the screen

and hear two beep sounds (see figure 1). In this mode, you can hold the thermometer within 4 cm from the central forehead (Fig. 2) and press

the "START" button to get the forehead measurement. The time consuming for measurement might be 1 second. After each forehead

measurement, wait icon stop flashing to be ready for next measurement.

Figure 2

Points for attention:

a. Forehead temperature is displayed in oral mode. This mode converts the forehead temperature to display its “oral-equivalent” value.

b. Before the measurement, the subject should stay in a stable environment for 5 minutes and avoid exercise, bath for 30mins.

c. Remember to keep the forehead area clean and away from sweat, cosmetics and scar while taking temperature.

d. The “Clinical Bias” is -2.5 ~ -3.1°F (-1.4 ~ -1.7

C).

e. The “Limits of Agreement” is 0.98.

f. The "Repeatability" is 0.36°F(0.20

4. Measuring surface temperature:

4.1 After power on, press and hold the “ON/MEM” button, and press the “START” button one time for “Infrared thermometer” mode to see icon on your LCD

display. In this mode, you can get the target surface temperature.

4.2 When you press the “START” button, you will get the real time temperature immediately. If you press and hold the “START” button, the reading of measurement will

be continuously updated.

4.3 Applications include temperature measurements for water, milk, cloth, skin or other objects.

* Note: This mode shows the actual and unadjusted surface temperature which is different from the body temperature.

5. Power off:

5.1 Device will automatically shut off if left idle for more than 1 minute to extend battery life.

5.2 Manually power off the device by pressing the “ON/MEM” button.

Important Notes

Cleaning

And Storage

Please make sure the probe is clean to ensure an accurate reading.

The probe lens is the most delicate part of the thermometer. Use with care when cleaning the probe lens to avoid damage.

a. Use alcohol swabs or cotton swabs moistened with 70%~75% alcohol to clean the probe lens.

b. Allow the probe to fully dry for at least 1 minute.

c. Keep the unit dry and away from any liquids and direct sunlight.

d. Storage temperature range: It should be stored at room temperature between -4~122°F (-20~+50°C),RH

≦

85%

e. The Probe should not be submerged into liquids.

Holding the thermometer too long may cause a higher ambient temperature reading of the probe.

This could make the body temperature measurement lower than usual.

Battery replacement

When the “Low Battery” icon indicates the battery is low, the battery should be replaced immediately with AAA *2 pcs batteries.

1. Open the battery cover: Use the thumbs to push battery cover out. (See Figure 1)

2. Insert the new AAA *2 pcs batteries. (See Figure 2)

3. Replace the battery cover. (See Figure 3)

Trouble shooting:

Error Message

Problem

Solution

Error 5~9, the system is not functioning properly.

Unload the battery, wait for 1 minute and repower it. If the message

reappears, contact the retailer for service.

Measurement before device stabilization.

Wait for “Er1” to disappear.

The ambient temperature is not within the range between 50oF~104oF (10oC~40oC).

Allow the thermometer to rest in a room for at least 15 minutes at room

temperature: 50oF~104oF (10oC~40oC).

(1) In forehead mode: Temperature taken is higher than 108°F (+42.2oC)

(2) In surface mode: Temperature taken is higher than 176°F (+80oC)

Please select the target within specifications. If a malfunction still exists,

please contact the nearest retailer.

(1) In forehead mode: Temperature taken is lower than 93.2°F (+34oC)

(2) In surface mode: Temperature taken is lower than –7.6°F (-22oC)

Device cannot be powered on to the ready stage.

Change with a new battery.

Warranty:

Warranty: 12 months

Manufacture Date: as the serial number (please open the battery cover, it is shown on the inside of the device.)

Ex.SN:E512A000001, the first “E” is External, the second number “5” is the last number of manufacture year, the third and the fourth number “12” is the manufacture

month, the others is the serial number.

Note: The thermometer is calibrated at the time of manufacture. If you question calibration mode, the accuracy of temperature measurements or unexpected

events at any time, please contact the dealers or nearest service address.

Warning: No modification of this equipment is allowed.

Please read the instructions for use BF type applied part

Radiant Innovation Inc.

Http://www.radiantek.com.tw

Add: 1F, No.3, Industrial East 9th Road,

Science-Based Industrial Park, HsinChu, Taiwan 300.

Figure 1Figure 2Figure 3

icon to stop ﬂashing to be ready

for next measurement.

NOTE:

• Forehead temperature is displayed in oral mode. This mode converts the forehead temperature to display its “oral-

equivalent” value.

• Before the measurement, the subject should stay in a stable environment for 5 minutes and avoid exercise/bath for 30

minutes.

• Remember to keep the forehead area clean and away from sweat, cosmetics and scars while taking temperature.

• The “Clinical Bias” is -2.5 ~ -3.1°F (-1.4 ~ -1.7°C).

• The “Limits of Agreement” is 0.98.

• The “Repeatability” is 0.36°F (0.20°C)

MEASURING SURFACE TEMPERATURE

1. After power is on, press and hold the “ON/MEM” button, and press the “START” button one time for “infrared

thermometer” mode you will see the

Ref No.：032020

Press the “ON/MEM” button to power on the device. Forehead mode is the default mode. You can see the icon on the screen

and hear two beep sounds (see figure 1). In this mode, you can hold the thermometer within 4 cm from the central forehead (Fig. 2) and press

the "START" button to get the forehead measurement. The time consuming for measurement might be 1 second. After each forehead

measurement, wait icon stop flashing to be ready for next measurement.

Figure 2

Points for attention:

a. Forehead temperature is displayed in oral mode. This mode converts the forehead temperature to display its “oral-equivalent” value.

b. Before the measurement, the subject should stay in a stable environment for 5 minutes and avoid exercise, bath for 30mins.

c. Remember to keep the forehead area clean and away from sweat, cosmetics and scar while taking temperature.

d. The “Clinical Bias” is -2.5 ~ -3.1°F (-1.4 ~ -1.7

C).

e. The “Limits of Agreement” is 0.98.

f. The "Repeatability" is 0.36°F(0.20

4. Measuring surface temperature:

4.1 After power on, press and hold the “ON/MEM” button, and press the “START” button one time for “Infrared thermometer” mode to see icon on your LCD

display. In this mode, you can get the target surface temperature.

4.2 When you press the “START” button, you will get the real time temperature immediately. If you press and hold the “START” button, the reading of measurement will

be continuously updated.

4.3 Applications include temperature measurements for water, milk, cloth, skin or other objects.

* Note: This mode shows the actual and unadjusted surface temperature which is different from the body temperature.

5. Power off:

5.1 Device will automatically shut off if left idle for more than 1 minute to extend battery life.

5.2 Manually power off the device by pressing the “ON/MEM” button.

Important Notes

Cleaning

And Storage

Please make sure the probe is clean to ensure an accurate reading.

The probe lens is the most delicate part of the thermometer. Use with care when cleaning the probe lens to avoid damage.

a. Use alcohol swabs or cotton swabs moistened with 70%~75% alcohol to clean the probe lens.

b. Allow the probe to fully dry for at least 1 minute.

c. Keep the unit dry and away from any liquids and direct sunlight.

d. Storage temperature range: It should be stored at room temperature between -4~122°F (-20~+50°C),RH

≦

85%

e. The Probe should not be submerged into liquids.

Holding the thermometer too long may cause a higher ambient temperature reading of the probe.

This could make the body temperature measurement lower than usual.

Battery replacement

When the “Low Battery” icon indicates the battery is low, the battery should be replaced immediately with AAA *2 pcs batteries.

1. Open the battery cover: Use the thumbs to push battery cover out. (See Figure 1)

2. Insert the new AAA *2 pcs batteries. (See Figure 2)

3. Replace the battery cover. (See Figure 3)

Trouble shooting:

Error Message

Problem

Solution

Error 5~9, the system is not functioning properly.

Unload the battery, wait for 1 minute and repower it. If the message

reappears, contact the retailer for service.

Measurement before device stabilization.

Wait for “Er1” to disappear.

The ambient temperature is not within the range between 50oF~104oF (10oC~40oC).

Allow the thermometer to rest in a room for at least 15 minutes at room

temperature: 50oF~104oF (10oC~40oC).

(1) In forehead mode: Temperature taken is higher than 108°F (+42.2oC)

(2) In surface mode: Temperature taken is higher than 176°F (+80oC)

Please select the target within specifications. If a malfunction still exists,

please contact the nearest retailer.

(1) In forehead mode: Temperature taken is lower than 93.2°F (+34oC)

(2) In surface mode: Temperature taken is lower than –7.6°F (-22oC)

Device cannot be powered on to the ready stage.

Change with a new battery.

Warranty:

Warranty: 12 months

Manufacture Date: as the serial number (please open the battery cover, it is shown on the inside of the device.)

Ex.SN:E512A000001, the first “E” is External, the second number “5” is the last number of manufacture year, the third and the fourth number “12” is the manufacture

month, the others is the serial number.

Note: The thermometer is calibrated at the time of manufacture. If you question calibration mode, the accuracy of temperature measurements or unexpected

events at any time, please contact the dealers or nearest service address.

Warning: No modification of this equipment is allowed.

Please read the instructions for use BF type applied part

Radiant Innovation Inc.

Http://www.radiantek.com.tw

Add: 1F, No.3, Industrial East 9th Road,

Science-Based Industrial Park, HsinChu, Taiwan 300.

Figure 1Figure 2Figure 3

icon on your LCD display. In this mode, you can get the target surface

temperature.

2. When you press the “START” button, you will get the real time temperature immediately. If you press and hold the

“START” button, the measurement reading will be continuously updated.

NOTE: This mode shows the actual and unadjusted surface temperature which is different from the body temperature.

POWER OFF

1. The device will automatically shut-off if left idle for more than 1 minute to extend battery life.

2. Manually power off the device by pressing the “ON/MEM” button.

4www.mastercool.com

IMPORTANT NOTES

CLEANING AND STORAGE:

Please make sure the probe is clean to ensure an accurate reading.

The probe lens is the most delicate part of the thermometer. Use with care when cleaning the probe lens to avoid

damage.

• Use alcohol or cotton swabs moistened with 70%~75% alcohol to clean the probe lens.

• Allow the probe to fully dry for at least 1 minute.

• Keep the unit dry and away from any liquids and direct sunlight.

• Storage temperature range: stored at room temperature between -4~122°F (-20~+50°C), RH≤85%

• The probe should not be submerged into liquids.

Holding the thermometer too long may cause a higher ambient temperature reading of the probe. This could make

the body temperature measurement lower than usual.

BATTERY REPLACEMENT:

Ref No.：032020

Press the “ON/MEM” button to power on the device. Forehead mode is the default mode. You can see the icon on the screen

and hear two beep sounds (see figure 1). In this mode, you can hold the thermometer within 4 cm from the central forehead (Fig. 2) and press

the "START" button to get the forehead measurement. The time consuming for measurement might be 1 second. After each forehead

measurement, wait icon stop flashing to be ready for next measurement.

Figure 2

Points for attention:

a. Forehead temperature is displayed in oral mode. This mode converts the forehead temperature to display its “oral-equivalent” value.

b. Before the measurement, the subject should stay in a stable environment for 5 minutes and avoid exercise, bath for 30mins.

c. Remember to keep the forehead area clean and away from sweat, cosmetics and scar while taking temperature.

d. The “Clinical Bias” is -2.5 ~ -3.1°F (-1.4 ~ -1.7

C).

e. The “Limits of Agreement” is 0.98.

f. The "Repeatability" is 0.36°F(0.20

4. Measuring surface temperature:

4.1 After power on, press and hold the “ON/MEM” button, and press the “START” button one time for “Infrared thermometer” mode to see icon on your LCD

display. In this mode, you can get the target surface temperature.

4.2 When you press the “START” button, you will get the real time temperature immediately. If you press and hold the “START” button, the reading of measurement will

be continuously updated.

4.3 Applications include temperature measurements for water, milk, cloth, skin or other objects.

* Note: This mode shows the actual and unadjusted surface temperature which is different from the body temperature.

5. Power off:

5.1 Device will automatically shut off if left idle for more than 1 minute to extend battery life.

5.2 Manually power off the device by pressing the “ON/MEM” button.

Important Notes

Cleaning

And Storage

Please make sure the probe is clean to ensure an accurate reading.

The probe lens is the most delicate part of the thermometer. Use with care when cleaning the probe lens to avoid damage.

a. Use alcohol swabs or cotton swabs moistened with 70%~75% alcohol to clean the probe lens.

b. Allow the probe to fully dry for at least 1 minute.

c. Keep the unit dry and away from any liquids and direct sunlight.

d. Storage temperature range: It should be stored at room temperature between -4~122°F (-20~+50°C),RH

≦

85%

e. The Probe should not be submerged into liquids.

Holding the thermometer too long may cause a higher ambient temperature reading of the probe.

This could make the body temperature measurement lower than usual.

Battery replacement

When the “Low Battery” icon indicates the battery is low, the battery should be replaced immediately with AAA *2 pcs batteries.

1. Open the battery cover: Use the thumbs to push battery cover out. (See Figure 1)

2. Insert the new AAA *2 pcs batteries. (See Figure 2)

3. Replace the battery cover. (See Figure 3)

Trouble shooting:

Error Message

Problem

Solution

Error 5~9, the system is not functioning properly.

Unload the battery, wait for 1 minute and repower it. If the message

reappears, contact the retailer for service.

Measurement before device stabilization.

Wait for “Er1” to disappear.

The ambient temperature is not within the range between 50oF~104oF (10oC~40oC).

Allow the thermometer to rest in a room for at least 15 minutes at room

temperature: 50oF~104oF (10oC~40oC).

(1) In forehead mode: Temperature taken is higher than 108°F (+42.2oC)

(2) In surface mode: Temperature taken is higher than 176°F (+80oC)

Please select the target within specifications. If a malfunction still exists,

please contact the nearest retailer.

(1) In forehead mode: Temperature taken is lower than 93.2°F (+34oC)

(2) In surface mode: Temperature taken is lower than –7.6°F (-22oC)

Device cannot be powered on to the ready stage.

Change with a new battery.

Warranty:

Warranty: 12 months

Manufacture Date: as the serial number (please open the battery cover, it is shown on the inside of the device.)

Ex.SN:E512A000001, the first “E” is External, the second number “5” is the last number of manufacture year, the third and the fourth number “12” is the manufacture

month, the others is the serial number.

Note: The thermometer is calibrated at the time of manufacture. If you question calibration mode, the accuracy of temperature measurements or unexpected

events at any time, please contact the dealers or nearest service address.

Warning: No modification of this equipment is allowed.

Please read the instructions for use BF type applied part

Radiant Innovation Inc.

Http://www.radiantek.com.tw

Add: 1F, No.3, Industrial East 9th Road,

Science-Based Industrial Park, HsinChu, Taiwan 300.

Figure 1Figure 2Figure 3

When the “low battery” icon indicates the battery is low, the battery should be replaced immediately with AAA *2 pcs

batteries.

1. Open the battery cover, use your thumbs to push battery cover out.

(see ﬁgure 1)

2. Insert the new AAA (*2 pcs) batteries. (see ﬁgure 2)

3. Replace the battery cover. (see ﬁgure 3)

Ref No.：032020

Press the “ON/MEM” button to power on the device. Forehead mode is the default mode. You can see the icon on the screen

and hear two beep sounds (see figure 1). In this mode, you can hold the thermometer within 4 cm from the central forehead (Fig. 2) and press

the "START" button to get the forehead measurement. The time consuming for measurement might be 1 second. After each forehead

measurement, wait icon stop flashing to be ready for next measurement.

Figure 2

Points for attention:

a. Forehead temperature is displayed in oral mode. This mode converts the forehead temperature to display its “oral-equivalent” value.

b. Before the measurement, the subject should stay in a stable environment for 5 minutes and avoid exercise, bath for 30mins.

c. Remember to keep the forehead area clean and away from sweat, cosmetics and scar while taking temperature.

d. The “Clinical Bias” is -2.5 ~ -3.1°F (-1.4 ~ -1.7

C).

e. The “Limits of Agreement” is 0.98.

f. The "Repeatability" is 0.36°F(0.20

4. Measuring surface temperature:

4.1 After power on, press and hold the “ON/MEM” button, and press the “START” button one time for “Infrared thermometer” mode to see icon on your LCD

display. In this mode, you can get the target surface temperature.

4.2 When you press the “START” button, you will get the real time temperature immediately. If you press and hold the “START” button, the reading of measurement will

be continuously updated.

4.3 Applications include temperature measurements for water, milk, cloth, skin or other objects.

* Note: This mode shows the actual and unadjusted surface temperature which is different from the body temperature.

5. Power off:

5.1 Device will automatically shut off if left idle for more than 1 minute to extend battery life.

5.2 Manually power off the device by pressing the “ON/MEM” button.

Important Notes

Cleaning

And Storage

Please make sure the probe is clean to ensure an accurate reading.

The probe lens is the most delicate part of the thermometer. Use with care when cleaning the probe lens to avoid damage.

a. Use alcohol swabs or cotton swabs moistened with 70%~75% alcohol to clean the probe lens.

b. Allow the probe to fully dry for at least 1 minute.

c. Keep the unit dry and away from any liquids and direct sunlight.

d. Storage temperature range: It should be stored at room temperature between -4~122°F (-20~+50°C),RH

≦

85%

e. The Probe should not be submerged into liquids.

Holding the thermometer too long may cause a higher ambient temperature reading of the probe.

This could make the body temperature measurement lower than usual.

Battery replacement

When the “Low Battery” icon indicates the battery is low, the battery should be replaced immediately with AAA *2 pcs batteries.

1. Open the battery cover: Use the thumbs to push battery cover out. (See Figure 1)

2. Insert the new AAA *2 pcs batteries. (See Figure 2)

3. Replace the battery cover. (See Figure 3)

Trouble shooting:

Error Message

Problem

Solution

Error 5~9, the system is not functioning properly.

Unload the battery, wait for 1 minute and repower it. If the message

reappears, contact the retailer for service.

Measurement before device stabilization.

Wait for “Er1” to disappear.

The ambient temperature is not within the range between 50oF~104oF (10oC~40oC).

Allow the thermometer to rest in a room for at least 15 minutes at room

temperature: 50oF~104oF (10oC~40oC).

(1) In forehead mode: Temperature taken is higher than 108°F (+42.2oC)

(2) In surface mode: Temperature taken is higher than 176°F (+80oC)

Please select the target within specifications. If a malfunction still exists,

please contact the nearest retailer.

(1) In forehead mode: Temperature taken is lower than 93.2°F (+34oC)

(2) In surface mode: Temperature taken is lower than –7.6°F (-22oC)

Device cannot be powered on to the ready stage.

Change with a new battery.

Warranty:

Warranty: 12 months

Manufacture Date: as the serial number (please open the battery cover, it is shown on the inside of the device.)

Ex.SN:E512A000001, the first “E” is External, the second number “5” is the last number of manufacture year, the third and the fourth number “12” is the manufacture

month, the others is the serial number.

Note: The thermometer is calibrated at the time of manufacture. If you question calibration mode, the accuracy of temperature measurements or unexpected

events at any time, please contact the dealers or nearest service address.

Warning: No modification of this equipment is allowed.

Please read the instructions for use BF type applied part

Radiant Innovation Inc.

Http://www.radiantek.com.tw

Add: 1F, No.3, Industrial East 9th Road,

Science-Based Industrial Park, HsinChu, Taiwan 300.

Figure 1Figure 2Figure 3

TROUBLESHOOTING:

Error Message Problem Solution

Ref No.：032020

Press the “ON/MEM” button to power on the device. Forehead mode is the default mode. You can see the icon on the screen

and hear two beep sounds (see figure 1). In this mode, you can hold the thermometer within 4 cm from the central forehead (Fig. 2) and press

the "START" button to get the forehead measurement. The time consuming for measurement might be 1 second. After each forehead

measurement, wait icon stop flashing to be ready for next measurement.

Figure 2

Points for attention:

a. Forehead temperature is displayed in oral mode. This mode converts the forehead temperature to display its “oral-equivalent” value.

b. Before the measurement, the subject should stay in a stable environment for 5 minutes and avoid exercise, bath for 30mins.

c. Remember to keep the forehead area clean and away from sweat, cosmetics and scar while taking temperature.

d. The “Clinical Bias” is -2.5 ~ -3.1°F (-1.4 ~ -1.7

C).

e. The “Limits of Agreement” is 0.98.

f. The "Repeatability" is 0.36°F(0.20

4. Measuring surface temperature:

4.1 After power on, press and hold the “ON/MEM” button, and press the “START” button one time for “Infrared thermometer” mode to see icon on your LCD

display. In this mode, you can get the target surface temperature.

4.2 When you press the “START” button, you will get the real time temperature immediately. If you press and hold the “START” button, the reading of measurement will

be continuously updated.

4.3 Applications include temperature measurements for water, milk, cloth, skin or other objects.

* Note: This mode shows the actual and unadjusted surface temperature which is different from the body temperature.

5. Power off:

5.1 Device will automatically shut off if left idle for more than 1 minute to extend battery life.

5.2 Manually power off the device by pressing the “ON/MEM” button.

Important Notes

Cleaning

And Storage

Please make sure the probe is clean to ensure an accurate reading.

The probe lens is the most delicate part of the thermometer. Use with care when cleaning the probe lens to avoid damage.

a. Use alcohol swabs or cotton swabs moistened with 70%~75% alcohol to clean the probe lens.

b. Allow the probe to fully dry for at least 1 minute.

c. Keep the unit dry and away from any liquids and direct sunlight.

d. Storage temperature range: It should be stored at room temperature between -4~122°F (-20~+50°C),RH

≦

85%

e. The Probe should not be submerged into liquids.

Holding the thermometer too long may cause a higher ambient temperature reading of the probe.

This could make the body temperature measurement lower than usual.

Battery replacement

When the “Low Battery” icon indicates the battery is low, the battery should be replaced immediately with AAA *2 pcs batteries.

1. Open the battery cover: Use the thumbs to push battery cover out. (See Figure 1)

2. Insert the new AAA *2 pcs batteries. (See Figure 2)

3. Replace the battery cover. (See Figure 3)

Trouble shooting:

Error Message

Problem

Solution

Error 5~9, the system is not functioning properly.

Unload the battery, wait for 1 minute and repower it. If the message

reappears, contact the retailer for service.

Measurement before device stabilization.

Wait for “Er1” to disappear.

The ambient temperature is not within the range between 50oF~104oF (10oC~40oC).

Allow the thermometer to rest in a room for at least 15 minutes at room

temperature: 50oF~104oF (10oC~40oC).

(1) In forehead mode: Temperature taken is higher than 108°F (+42.2oC)

(2) In surface mode: Temperature taken is higher than 176°F (+80oC)

Please select the target within specifications. If a malfunction still exists,

please contact the nearest retailer.

(1) In forehead mode: Temperature taken is lower than 93.2°F (+34oC)

(2) In surface mode: Temperature taken is lower than –7.6°F (-22oC)

Device cannot be powered on to the ready stage.

Change with a new battery.

Warranty:

Warranty: 12 months

Manufacture Date: as the serial number (please open the battery cover, it is shown on the inside of the device.)

Ex.SN:E512A000001, the first “E” is External, the second number “5” is the last number of manufacture year, the third and the fourth number “12” is the manufacture

month, the others is the serial number.

Note: The thermometer is calibrated at the time of manufacture. If you question calibration mode, the accuracy of temperature measurements or unexpected

events at any time, please contact the dealers or nearest service address.

Warning: No modification of this equipment is allowed.

Please read the instructions for use BF type applied part

Radiant Innovation Inc.

Http://www.radiantek.com.tw

Add: 1F, No.3, Industrial East 9th Road,

Science-Based Industrial Park, HsinChu, Taiwan 300.

Figure 1Figure 2Figure 3

Error 5~9, the system is not functioning properly. Unload the batteries, wait for 1 minute and

repower. If the message reappears, contact the

service department.

Ref No.：032020

Press the “ON/MEM” button to power on the device. Forehead mode is the default mode. You can see the icon on the screen

and hear two beep sounds (see figure 1). In this mode, you can hold the thermometer within 4 cm from the central forehead (Fig. 2) and press

the "START" button to get the forehead measurement. The time consuming for measurement might be 1 second. After each forehead

measurement, wait icon stop flashing to be ready for next measurement.

Figure 2

Points for attention:

a. Forehead temperature is displayed in oral mode. This mode converts the forehead temperature to display its “oral-equivalent” value.

b. Before the measurement, the subject should stay in a stable environment for 5 minutes and avoid exercise, bath for 30mins.

c. Remember to keep the forehead area clean and away from sweat, cosmetics and scar while taking temperature.

d. The “Clinical Bias” is -2.5 ~ -3.1°F (-1.4 ~ -1.7

C).

e. The “Limits of Agreement” is 0.98.

f. The "Repeatability" is 0.36°F(0.20

4. Measuring surface temperature:

4.1 After power on, press and hold the “ON/MEM” button, and press the “START” button one time for “Infrared thermometer” mode to see icon on your LCD

display. In this mode, you can get the target surface temperature.

4.2 When you press the “START” button, you will get the real time temperature immediately. If you press and hold the “START” button, the reading of measurement will

be continuously updated.

4.3 Applications include temperature measurements for water, milk, cloth, skin or other objects.

* Note: This mode shows the actual and unadjusted surface temperature which is different from the body temperature.

5. Power off:

5.1 Device will automatically shut off if left idle for more than 1 minute to extend battery life.

5.2 Manually power off the device by pressing the “ON/MEM” button.

Important Notes

Cleaning

And Storage

Please make sure the probe is clean to ensure an accurate reading.

The probe lens is the most delicate part of the thermometer. Use with care when cleaning the probe lens to avoid damage.

a. Use alcohol swabs or cotton swabs moistened with 70%~75% alcohol to clean the probe lens.

b. Allow the probe to fully dry for at least 1 minute.

c. Keep the unit dry and away from any liquids and direct sunlight.

d. Storage temperature range: It should be stored at room temperature between -4~122°F (-20~+50°C),RH

≦

85%

e. The Probe should not be submerged into liquids.

Holding the thermometer too long may cause a higher ambient temperature reading of the probe.

This could make the body temperature measurement lower than usual.

Battery replacement

When the “Low Battery” icon indicates the battery is low, the battery should be replaced immediately with AAA *2 pcs batteries.

1. Open the battery cover: Use the thumbs to push battery cover out. (See Figure 1)

2. Insert the new AAA *2 pcs batteries. (See Figure 2)

3. Replace the battery cover. (See Figure 3)

Trouble shooting:

Error Message

Problem

Solution

Error 5~9, the system is not functioning properly.

Unload the battery, wait for 1 minute and repower it. If the message

reappears, contact the retailer for service.

Measurement before device stabilization.

Wait for “Er1” to disappear.

The ambient temperature is not within the range between 50oF~104oF (10oC~40oC).

Allow the thermometer to rest in a room for at least 15 minutes at room

temperature: 50oF~104oF (10oC~40oC).

(1) In forehead mode: Temperature taken is higher than 108°F (+42.2oC)

(2) In surface mode: Temperature taken is higher than 176°F (+80oC)

Please select the target within specifications. If a malfunction still exists,

please contact the nearest retailer.

(1) In forehead mode: Temperature taken is lower than 93.2°F (+34oC)

(2) In surface mode: Temperature taken is lower than –7.6°F (-22oC)

Device cannot be powered on to the ready stage.

Change with a new battery.

Warranty:

Warranty: 12 months

Manufacture Date: as the serial number (please open the battery cover, it is shown on the inside of the device.)

Ex.SN:E512A000001, the first “E” is External, the second number “5” is the last number of manufacture year, the third and the fourth number “12” is the manufacture

month, the others is the serial number.

Note: The thermometer is calibrated at the time of manufacture. If you question calibration mode, the accuracy of temperature measurements or unexpected

events at any time, please contact the dealers or nearest service address.

Warning: No modification of this equipment is allowed.

Please read the instructions for use BF type applied part

Radiant Innovation Inc.

Http://www.radiantek.com.tw

Add: 1F, No.3, Industrial East 9th Road,

Science-Based Industrial Park, HsinChu, Taiwan 300.

Figure 1Figure 2Figure 3

Measurement before device stabilization. Wait for “Er1” to disappear.

Ref No.：032020

Press the “ON/MEM” button to power on the device. Forehead mode is the default mode. You can see the icon on the screen

and hear two beep sounds (see figure 1). In this mode, you can hold the thermometer within 4 cm from the central forehead (Fig. 2) and press

the "START" button to get the forehead measurement. The time consuming for measurement might be 1 second. After each forehead

measurement, wait icon stop flashing to be ready for next measurement.

Figure 2

Points for attention:

a. Forehead temperature is displayed in oral mode. This mode converts the forehead temperature to display its “oral-equivalent” value.

b. Before the measurement, the subject should stay in a stable environment for 5 minutes and avoid exercise, bath for 30mins.

c. Remember to keep the forehead area clean and away from sweat, cosmetics and scar while taking temperature.

d. The “Clinical Bias” is -2.5 ~ -3.1°F (-1.4 ~ -1.7

C).

e. The “Limits of Agreement” is 0.98.

f. The "Repeatability" is 0.36°F(0.20

4. Measuring surface temperature:

4.1 After power on, press and hold the “ON/MEM” button, and press the “START” button one time for “Infrared thermometer” mode to see icon on your LCD

display. In this mode, you can get the target surface temperature.

4.2 When you press the “START” button, you will get the real time temperature immediately. If you press and hold the “START” button, the reading of measurement will

be continuously updated.

4.3 Applications include temperature measurements for water, milk, cloth, skin or other objects.

* Note: This mode shows the actual and unadjusted surface temperature which is different from the body temperature.

5. Power off:

5.1 Device will automatically shut off if left idle for more than 1 minute to extend battery life.

5.2 Manually power off the device by pressing the “ON/MEM” button.

Important Notes

Cleaning

And Storage

Please make sure the probe is clean to ensure an accurate reading.

The probe lens is the most delicate part of the thermometer. Use with care when cleaning the probe lens to avoid damage.

a. Use alcohol swabs or cotton swabs moistened with 70%~75% alcohol to clean the probe lens.

b. Allow the probe to fully dry for at least 1 minute.

c. Keep the unit dry and away from any liquids and direct sunlight.

d. Storage temperature range: It should be stored at room temperature between -4~122°F (-20~+50°C),RH

≦

85%

e. The Probe should not be submerged into liquids.

Holding the thermometer too long may cause a higher ambient temperature reading of the probe.

This could make the body temperature measurement lower than usual.

Battery replacement

When the “Low Battery” icon indicates the battery is low, the battery should be replaced immediately with AAA *2 pcs batteries.

1. Open the battery cover: Use the thumbs to push battery cover out. (See Figure 1)

2. Insert the new AAA *2 pcs batteries. (See Figure 2)

3. Replace the battery cover. (See Figure 3)

Trouble shooting:

Error Message

Problem

Solution

Error 5~9, the system is not functioning properly.

Unload the battery, wait for 1 minute and repower it. If the message

reappears, contact the retailer for service.

Measurement before device stabilization.

Wait for “Er1” to disappear.

The ambient temperature is not within the range between 50oF~104oF (10oC~40oC).

Allow the thermometer to rest in a room for at least 15 minutes at room

temperature: 50oF~104oF (10oC~40oC).

(1) In forehead mode: Temperature taken is higher than 108°F (+42.2oC)

(2) In surface mode: Temperature taken is higher than 176°F (+80oC)

Please select the target within specifications. If a malfunction still exists,

please contact the nearest retailer.

(1) In forehead mode: Temperature taken is lower than 93.2°F (+34oC)

(2) In surface mode: Temperature taken is lower than –7.6°F (-22oC)

Device cannot be powered on to the ready stage.

Change with a new battery.

Warranty:

Warranty: 12 months

Manufacture Date: as the serial number (please open the battery cover, it is shown on the inside of the device.)

Ex.SN:E512A000001, the first “E” is External, the second number “5” is the last number of manufacture year, the third and the fourth number “12” is the manufacture

month, the others is the serial number.

Note: The thermometer is calibrated at the time of manufacture. If you question calibration mode, the accuracy of temperature measurements or unexpected

events at any time, please contact the dealers or nearest service address.

Warning: No modification of this equipment is allowed.

Please read the instructions for use BF type applied part

Radiant Innovation Inc.

Http://www.radiantek.com.tw

Add: 1F, No.3, Industrial East 9th Road,

Science-Based Industrial Park, HsinChu, Taiwan 300.

Figure 1Figure 2Figure 3

The ambient temperature is not within the range

between 50˚F~104˚F (10˚C~40˚C).

Allow the thermometer to rest in a room for

at least 15 minutes at room temperature:

50˚F~104˚F (10˚C~40˚C).

Ref No.：032020

Press the “ON/MEM” button to power on the device. Forehead mode is the default mode. You can see the icon on the screen

and hear two beep sounds (see figure 1). In this mode, you can hold the thermometer within 4 cm from the central forehead (Fig. 2) and press

the "START" button to get the forehead measurement. The time consuming for measurement might be 1 second. After each forehead

measurement, wait icon stop flashing to be ready for next measurement.

Figure 2

Points for attention:

a. Forehead temperature is displayed in oral mode. This mode converts the forehead temperature to display its “oral-equivalent” value.

b. Before the measurement, the subject should stay in a stable environment for 5 minutes and avoid exercise, bath for 30mins.

c. Remember to keep the forehead area clean and away from sweat, cosmetics and scar while taking temperature.

d. The “Clinical Bias” is -2.5 ~ -3.1°F (-1.4 ~ -1.7

C).

e. The “Limits of Agreement” is 0.98.

f. The "Repeatability" is 0.36°F(0.20

4. Measuring surface temperature:

4.1 After power on, press and hold the “ON/MEM” button, and press the “START” button one time for “Infrared thermometer” mode to see icon on your LCD

display. In this mode, you can get the target surface temperature.

4.2 When you press the “START” button, you will get the real time temperature immediately. If you press and hold the “START” button, the reading of measurement will

be continuously updated.

4.3 Applications include temperature measurements for water, milk, cloth, skin or other objects.

* Note: This mode shows the actual and unadjusted surface temperature which is different from the body temperature.

5. Power off:

5.1 Device will automatically shut off if left idle for more than 1 minute to extend battery life.

5.2 Manually power off the device by pressing the “ON/MEM” button.

Important Notes

Cleaning

And Storage

Please make sure the probe is clean to ensure an accurate reading.

The probe lens is the most delicate part of the thermometer. Use with care when cleaning the probe lens to avoid damage.

a. Use alcohol swabs or cotton swabs moistened with 70%~75% alcohol to clean the probe lens.

b. Allow the probe to fully dry for at least 1 minute.

c. Keep the unit dry and away from any liquids and direct sunlight.

d. Storage temperature range: It should be stored at room temperature between -4~122°F (-20~+50°C),RH

≦

85%

e. The Probe should not be submerged into liquids.

Holding the thermometer too long may cause a higher ambient temperature reading of the probe.

This could make the body temperature measurement lower than usual.

Battery replacement

When the “Low Battery” icon indicates the battery is low, the battery should be replaced immediately with AAA *2 pcs batteries.

1. Open the battery cover: Use the thumbs to push battery cover out. (See Figure 1)

2. Insert the new AAA *2 pcs batteries. (See Figure 2)

3. Replace the battery cover. (See Figure 3)

Trouble shooting:

Error Message

Problem

Solution

Error 5~9, the system is not functioning properly.

Unload the battery, wait for 1 minute and repower it. If the message

reappears, contact the retailer for service.

Measurement before device stabilization.

Wait for “Er1” to disappear.

The ambient temperature is not within the range between 50oF~104oF (10oC~40oC).

Allow the thermometer to rest in a room for at least 15 minutes at room

temperature: 50oF~104oF (10oC~40oC).

(1) In forehead mode: Temperature taken is higher than 108°F (+42.2oC)

(2) In surface mode: Temperature taken is higher than 176°F (+80oC)

Please select the target within specifications. If a malfunction still exists,

please contact the nearest retailer.

(1) In forehead mode: Temperature taken is lower than 93.2°F (+34oC)

(2) In surface mode: Temperature taken is lower than –7.6°F (-22oC)

Device cannot be powered on to the ready stage.

Change with a new battery.

Warranty:

Warranty: 12 months

Manufacture Date: as the serial number (please open the battery cover, it is shown on the inside of the device.)

Ex.SN:E512A000001, the first “E” is External, the second number “5” is the last number of manufacture year, the third and the fourth number “12” is the manufacture

month, the others is the serial number.

Note: The thermometer is calibrated at the time of manufacture. If you question calibration mode, the accuracy of temperature measurements or unexpected

events at any time, please contact the dealers or nearest service address.

Warning: No modification of this equipment is allowed.

Please read the instructions for use BF type applied part

Radiant Innovation Inc.

Http://www.radiantek.com.tw

Add: 1F, No.3, Industrial East 9th Road,

Science-Based Industrial Park, HsinChu, Taiwan 300.

Figure 1Figure 2Figure 3

(1) In forehead mode: temperature taken is higher

than 108˚F (42.2˚C)

(2) In surface mode: temperature taken is higher

than 176˚F (80˚C) Please select the target within speciﬁcations. If a

malfunction still exists, please contact the service

department.

Ref No.：032020

Press the “ON/MEM” button to power on the device. Forehead mode is the default mode. You can see the icon on the screen

and hear two beep sounds (see figure 1). In this mode, you can hold the thermometer within 4 cm from the central forehead (Fig. 2) and press

the "START" button to get the forehead measurement. The time consuming for measurement might be 1 second. After each forehead

measurement, wait icon stop flashing to be ready for next measurement.

Figure 2

Points for attention:

a. Forehead temperature is displayed in oral mode. This mode converts the forehead temperature to display its “oral-equivalent” value.

b. Before the measurement, the subject should stay in a stable environment for 5 minutes and avoid exercise, bath for 30mins.

c. Remember to keep the forehead area clean and away from sweat, cosmetics and scar while taking temperature.

d. The “Clinical Bias” is -2.5 ~ -3.1°F (-1.4 ~ -1.7

C).

e. The “Limits of Agreement” is 0.98.

f. The "Repeatability" is 0.36°F(0.20

4. Measuring surface temperature:

4.1 After power on, press and hold the “ON/MEM” button, and press the “START” button one time for “Infrared thermometer” mode to see icon on your LCD

display. In this mode, you can get the target surface temperature.

4.2 When you press the “START” button, you will get the real time temperature immediately. If you press and hold the “START” button, the reading of measurement will

be continuously updated.

4.3 Applications include temperature measurements for water, milk, cloth, skin or other objects.

* Note: This mode shows the actual and unadjusted surface temperature which is different from the body temperature.

5. Power off:

5.1 Device will automatically shut off if left idle for more than 1 minute to extend battery life.

5.2 Manually power off the device by pressing the “ON/MEM” button.

Important Notes

Cleaning

And Storage

Please make sure the probe is clean to ensure an accurate reading.

The probe lens is the most delicate part of the thermometer. Use with care when cleaning the probe lens to avoid damage.

a. Use alcohol swabs or cotton swabs moistened with 70%~75% alcohol to clean the probe lens.

b. Allow the probe to fully dry for at least 1 minute.

c. Keep the unit dry and away from any liquids and direct sunlight.

d. Storage temperature range: It should be stored at room temperature between -4~122°F (-20~+50°C),RH

≦

85%

e. The Probe should not be submerged into liquids.

Holding the thermometer too long may cause a higher ambient temperature reading of the probe.

This could make the body temperature measurement lower than usual.

Battery replacement

When the “Low Battery” icon indicates the battery is low, the battery should be replaced immediately with AAA *2 pcs batteries.

1. Open the battery cover: Use the thumbs to push battery cover out. (See Figure 1)

2. Insert the new AAA *2 pcs batteries. (See Figure 2)

3. Replace the battery cover. (See Figure 3)

Trouble shooting:

Error Message

Problem

Solution

Error 5~9, the system is not functioning properly.

Unload the battery, wait for 1 minute and repower it. If the message

reappears, contact the retailer for service.

Measurement before device stabilization.

Wait for “Er1” to disappear.

The ambient temperature is not within the range between 50oF~104oF (10oC~40oC).

Allow the thermometer to rest in a room for at least 15 minutes at room

temperature: 50oF~104oF (10oC~40oC).

(1) In forehead mode: Temperature taken is higher than 108°F (+42.2oC)

(2) In surface mode: Temperature taken is higher than 176°F (+80oC)

Please select the target within specifications. If a malfunction still exists,

please contact the nearest retailer.

(1) In forehead mode: Temperature taken is lower than 93.2°F (+34oC)

(2) In surface mode: Temperature taken is lower than –7.6°F (-22oC)

Device cannot be powered on to the ready stage.

Change with a new battery.

Warranty:

Warranty: 12 months

Manufacture Date: as the serial number (please open the battery cover, it is shown on the inside of the device.)

Ex.SN:E512A000001, the first “E” is External, the second number “5” is the last number of manufacture year, the third and the fourth number “12” is the manufacture

month, the others is the serial number.

Note: The thermometer is calibrated at the time of manufacture. If you question calibration mode, the accuracy of temperature measurements or unexpected

events at any time, please contact the dealers or nearest service address.

Warning: No modification of this equipment is allowed.

Please read the instructions for use BF type applied part

Radiant Innovation Inc.

Http://www.radiantek.com.tw

Add: 1F, No.3, Industrial East 9th Road,

Science-Based Industrial Park, HsinChu, Taiwan 300.

Figure 1Figure 2Figure 3

(1) In forehead mode: temperature taken is lower

than 93.2˚F (+34˚C)

(2) In surface mode: temperature taken is lower

than -7.6˚F (-22˚C)

Ref No.：032020

Press the “ON/MEM” button to power on the device. Forehead mode is the default mode. You can see the icon on the screen

and hear two beep sounds (see figure 1). In this mode, you can hold the thermometer within 4 cm from the central forehead (Fig. 2) and press

the "START" button to get the forehead measurement. The time consuming for measurement might be 1 second. After each forehead

measurement, wait icon stop flashing to be ready for next measurement.

Figure 2

Points for attention:

a. Forehead temperature is displayed in oral mode. This mode converts the forehead temperature to display its “oral-equivalent” value.

b. Before the measurement, the subject should stay in a stable environment for 5 minutes and avoid exercise, bath for 30mins.

c. Remember to keep the forehead area clean and away from sweat, cosmetics and scar while taking temperature.

d. The “Clinical Bias” is -2.5 ~ -3.1°F (-1.4 ~ -1.7

C).

e. The “Limits of Agreement” is 0.98.

f. The "Repeatability" is 0.36°F(0.20

4. Measuring surface temperature:

4.1 After power on, press and hold the “ON/MEM” button, and press the “START” button one time for “Infrared thermometer” mode to see icon on your LCD

display. In this mode, you can get the target surface temperature.

4.2 When you press the “START” button, you will get the real time temperature immediately. If you press and hold the “START” button, the reading of measurement will

be continuously updated.

4.3 Applications include temperature measurements for water, milk, cloth, skin or other objects.

* Note: This mode shows the actual and unadjusted surface temperature which is different from the body temperature.

5. Power off:

5.1 Device will automatically shut off if left idle for more than 1 minute to extend battery life.

5.2 Manually power off the device by pressing the “ON/MEM” button.

Important Notes

Cleaning

And Storage

Please make sure the probe is clean to ensure an accurate reading.

The probe lens is the most delicate part of the thermometer. Use with care when cleaning the probe lens to avoid damage.

a. Use alcohol swabs or cotton swabs moistened with 70%~75% alcohol to clean the probe lens.

b. Allow the probe to fully dry for at least 1 minute.

c. Keep the unit dry and away from any liquids and direct sunlight.

d. Storage temperature range: It should be stored at room temperature between -4~122°F (-20~+50°C),RH

≦

85%

e. The Probe should not be submerged into liquids.

Holding the thermometer too long may cause a higher ambient temperature reading of the probe.

This could make the body temperature measurement lower than usual.

Battery replacement

When the “Low Battery” icon indicates the battery is low, the battery should be replaced immediately with AAA *2 pcs batteries.

1. Open the battery cover: Use the thumbs to push battery cover out. (See Figure 1)

2. Insert the new AAA *2 pcs batteries. (See Figure 2)

3. Replace the battery cover. (See Figure 3)

Trouble shooting:

Error Message

Problem

Solution

Error 5~9, the system is not functioning properly.

Unload the battery, wait for 1 minute and repower it. If the message

reappears, contact the retailer for service.

Measurement before device stabilization.

Wait for “Er1” to disappear.

The ambient temperature is not within the range between 50oF~104oF (10oC~40oC).

Allow the thermometer to rest in a room for at least 15 minutes at room

temperature: 50oF~104oF (10oC~40oC).

(1) In forehead mode: Temperature taken is higher than 108°F (+42.2oC)

(2) In surface mode: Temperature taken is higher than 176°F (+80oC)

Please select the target within specifications. If a malfunction still exists,

please contact the nearest retailer.

(1) In forehead mode: Temperature taken is lower than 93.2°F (+34oC)

(2) In surface mode: Temperature taken is lower than –7.6°F (-22oC)

Device cannot be powered on to the ready stage.

Change with a new battery.

Warranty:

Warranty: 12 months

Manufacture Date: as the serial number (please open the battery cover, it is shown on the inside of the device.)

Ex.SN:E512A000001, the first “E” is External, the second number “5” is the last number of manufacture year, the third and the fourth number “12” is the manufacture

month, the others is the serial number.

Note: The thermometer is calibrated at the time of manufacture. If you question calibration mode, the accuracy of temperature measurements or unexpected

events at any time, please contact the dealers or nearest service address.

Warning: No modification of this equipment is allowed.

Please read the instructions for use BF type applied part

Radiant Innovation Inc.

Http://www.radiantek.com.tw

Add: 1F, No.3, Industrial East 9th Road,

Science-Based Industrial Park, HsinChu, Taiwan 300.

Figure 1Figure 2Figure 3

Device cannot be powered on to the ready stage. Change with a new battery.

5www.mastercool.com

MANUFACTURER’S DECLARATION-ELECTROMAGNETIC EMISSIONS

Intended for use in the electromagnetic environment (for home healthcare) speciﬁed below. The customer or the user

should assure that it is used in such an environment.

EMISSIONS

TEST COMPLIANCE ELECTROMAGNETIC ENVIRONMENT - guidance (for home healthcare environment)

RF emissions

CISPR 11 Group 1 This unit uses RF energy only for its internal function. Therefore, its RF emissions are

very low and are not likely to cause any interference in nearby electronic equipment.

RF emissions

CISPR 11

Class B This unit is suitable for use in all establishments, including domestic establishments

and those directly connected to the public low-voltage power supply network that

supplies buildings used for domestic purposes.

MANUFACTURER’S DECLARATION – ELECTROMAGNETIC IMMUNITY

Intended for use in the electromagnetic environment (for home healthcare) speciﬁed below. The customer or the user

should assure that it is used in such an environment.

IMMUNITY TEST IEC 60601 TEST LEVEL COMPLIANCE LEVEL ELECTROMAGNETIC ENVIRONMENT - guidance

(for home healthcare environment)

Electrostatic discharge

(ESD)

IEC 61000-4-2

Contact: ±8 kV

Air ±2 kV, ±4 kV, ±8

kV, ±15 kV

Contact: ±8 kV

Air ±2 kV, ±4 kV, ±8

kV, ±15 Kv

Floors should be wood, concrete or ceramic

tile. If ﬂoors are covered with synthetic

material, the relative humidity should be at

least 30%

Power frequency (50,

60 Hz) magnetic ﬁeld

IEC 61000-4-8

30 A/m

50 Hz or 60 Hz

30 A/m

50 Hz and 60 Hz

Power frequency magnetic ﬁelds should be at

levels characteristic of a typical location in a

typical home healthcare environment.

MANUFACTURER’S DECLARATION – ELECTROMAGNETIC IMMUNITY

Intended for use in the electromagnetic environment (for home healthcare speciﬁed below. The customer or the user

should assure that it is used in such an environment.

IMMUNITY TEST IEC 60601 TEST

LEVEL

COMPLIANCE

LEVEL

ELECTROMAGNETIC ENVIRONMENT - guidance (for home

healthcare environment)

Radiated RF

IEC 61000-4-3

10 V/m

80 MHz – 2,7

GHz

80% AM at 1

kHz

10 V/m

80 MHz – 2,7

GHz

80% AM at 1

kHz

Recommended separation distance:

d = 1,2

Symbol Descriptions

Caution

Please read the instructions for use

Battery Recycling

BF type applied part

Paper Recycling

Stand-by

IP22

Classification for water ingress and

particulate matter.

Manufacturer’s declaration-electromagnetic emissions

The THD2FE is intended for use in the electromagnetic environment (for home healthcare) specified below.The customer or the user of the THD2FE

should assure that it is used in such an environment.

Emissions test

Compliance

Electromagnetic environment – guidance

(for home healthcare environment)

RF emissions

CISPR 11

Group 1

The THD2FE uses RF energy only for its internal function. Therefore, its RF emissions are very

low and are not likely to cause any interference in nearby electronic equipment.

RF emissions

CISPR 11

Class B

The THD2FE is suitable for use in all establishments, including domestic establishments and

those directly connected to the public low-voltage power supply network that supplies buildings

used for domestic purposes.

Manufacturer’s declaration – electromagnetic immunity

The THD2FE is intended for use in the electromagnetic environment (for home healthcare) specified below. The customer or the user of the THD2FE

should assure that it is used in such an environment.

Immunity test

IEC 60601 test level

Compliance level

Electromagnetic environment – guidance

(for home healthcare environment)

Electrostatic discharge(ESD)

IEC 61000-4-2

Contact:±8 kV

Air±2 kV,±4 kV,±8

kV,±15 kV

Contact:±8 kV

Air±2 kV,±4 kV,±8

kV,±15 Kv

Floors should be wood, concrete or ceramic tile. If floors are covered

with synthetic material, the relative humidity should be at least 30%

Power frequency(50, 60 Hz)

magnetic field IEC 61000-4-8

30 A/m

50 Hz or 60 Hz

30 A/m

50 Hz and 60 Hz

The THD2FE power frequency magnetic fields should be at levels

characteristic of a typical location in a typical home healthcare

environment.

Manufacturer’s declaration – electromagnetic immunity

The THD2FE is intended for use in the electromagnetic environment (for home healthcare) specified below. The customer or the user of the THD2FE

should assure that it is used in such an environment.

Immunity test

IEC 60601 test level

Compliance

level

Electromagnetic environment – guidance

(for home healthcare environment)

Radiated RF

IEC 61000-4-3

10 V/m

80 MHz – 2,7 GHz

80 % AM at 1 kHz

10 V/m

80 MHz – 2,7

GHz

80 % AM at 1

kHz

Recommended separation distance:

d = 1,2

d = 1,2 80MHz to 800 MHz

d = 2,3 800MHz to 2,7 GHz

Where P is the maximum output power rating of the transmitter in watts (W) according to

the transmitter manufacturer and d is the recommended separation distance in metres

(m).

Field strengths from fixed RF transmitters, as determined by an electromagnetic site

survey, a should be less than the compliance level in each frequency range.b

Interference may occur in the vicinity of equipment marked with the following

symbol:

NOTE1 At 80 MHz and 800 MHz, the higher frequency range applies.

NOTE2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection from structures, objects

and people.

Field strengths from fixed transmitters, such as base stations for radio (cellular/cordless) telephones and land mobile radios, amateur radio, AM and FM

radio broadcast and TV broadcast cannot be predicted theoretically with accuracy. To assess the electromagnetic environment due to fixed RF

transmitters, an electromagnetic site survey should be considered. If the measured field strength in the location in which the THD2FE is used exceeds the

applicable RF compliance level above, the THD2FE should be observed to verify normal operation. If abnormal performance is observed, additional

measures may be necessary, such as re-orienting or relocating the THD2FE.

Recommended separation distances between

portable and mobile RF communications equipment and the THD2FE

d = 1,2

Symbol Descriptions

Caution

Please read the instructions for use

Battery Recycling

BF type applied part

Paper Recycling

Stand-by

IP22

Classification for water ingress and

particulate matter.

Manufacturer’s declaration-electromagnetic emissions

The THD2FE is intended for use in the electromagnetic environment (for home healthcare) specified below.The customer or the user of the THD2FE

should assure that it is used in such an environment.

Emissions test

Compliance

Electromagnetic environment – guidance

(for home healthcare environment)

RF emissions

CISPR 11

Group 1

The THD2FE uses RF energy only for its internal function. Therefore, its RF emissions are very

low and are not likely to cause any interference in nearby electronic equipment.

RF emissions

CISPR 11

Class B

The THD2FE is suitable for use in all establishments, including domestic establishments and

those directly connected to the public low-voltage power supply network that supplies buildings

used for domestic purposes.

Manufacturer’s declaration – electromagnetic immunity

The THD2FE is intended for use in the electromagnetic environment (for home healthcare) specified below. The customer or the user of the THD2FE

should assure that it is used in such an environment.

Immunity test

IEC 60601 test level

Compliance level

Electromagnetic environment – guidance

(for home healthcare environment)

Electrostatic discharge(ESD)

IEC 61000-4-2

Contact:±8 kV

Air±2 kV,±4 kV,±8

kV,±15 kV

Contact:±8 kV

Air±2 kV,±4 kV,±8

kV,±15 Kv

Floors should be wood, concrete or ceramic tile. If floors are covered

with synthetic material, the relative humidity should be at least 30%

Power frequency(50, 60 Hz)

magnetic field IEC 61000-4-8

30 A/m

50 Hz or 60 Hz

30 A/m

50 Hz and 60 Hz

The THD2FE power frequency magnetic fields should be at levels

characteristic of a typical location in a typical home healthcare

environment.

Manufacturer’s declaration – electromagnetic immunity

The THD2FE is intended for use in the electromagnetic environment (for home healthcare) specified below. The customer or the user of the THD2FE

should assure that it is used in such an environment.

Immunity test

IEC 60601 test level

Compliance

level

Electromagnetic environment – guidance

(for home healthcare environment)

Radiated RF

IEC 61000-4-3

10 V/m

80 MHz – 2,7 GHz

80 % AM at 1 kHz

10 V/m

80 MHz – 2,7

GHz

80 % AM at 1

kHz

Recommended separation distance:

d = 1,2

d = 1,2 80MHz to 800 MHz

d = 2,3 800MHz to 2,7 GHz

Where P is the maximum output power rating of the transmitter in watts (W) according to

the transmitter manufacturer and d is the recommended separation distance in metres

(m).

Field strengths from fixed RF transmitters, as determined by an electromagnetic site

survey, a should be less than the compliance level in each frequency range.b

Interference may occur in the vicinity of equipment marked with the following

symbol:

NOTE1 At 80 MHz and 800 MHz, the higher frequency range applies.

NOTE2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection from structures, objects

and people.

Field strengths from fixed transmitters, such as base stations for radio (cellular/cordless) telephones and land mobile radios, amateur radio, AM and FM

radio broadcast and TV broadcast cannot be predicted theoretically with accuracy. To assess the electromagnetic environment due to fixed RF

transmitters, an electromagnetic site survey should be considered. If the measured field strength in the location in which the THD2FE is used exceeds the

applicable RF compliance level above, the THD2FE should be observed to verify normal operation. If abnormal performance is observed, additional

measures may be necessary, such as re-orienting or relocating the THD2FE.

Recommended separation distances between

portable and mobile RF communications equipment and the THD2FE

80 MHz to 800 MHz

d = 2,3

Symbol Descriptions

Caution

Please read the instructions for use

Battery Recycling

BF type applied part

Paper Recycling

Stand-by

IP22

Classification for water ingress and

particulate matter.

Manufacturer’s declaration-electromagnetic emissions

The THD2FE is intended for use in the electromagnetic environment (for home healthcare) specified below.The customer or the user of the THD2FE

should assure that it is used in such an environment.

Emissions test

Compliance

Electromagnetic environment – guidance

(for home healthcare environment)

RF emissions

CISPR 11

Group 1

The THD2FE uses RF energy only for its internal function. Therefore, its RF emissions are very

low and are not likely to cause any interference in nearby electronic equipment.

RF emissions

CISPR 11

Class B

The THD2FE is suitable for use in all establishments, including domestic establishments and

those directly connected to the public low-voltage power supply network that supplies buildings

used for domestic purposes.

Manufacturer’s declaration – electromagnetic immunity

The THD2FE is intended for use in the electromagnetic environment (for home healthcare) specified below. The customer or the user of the THD2FE

should assure that it is used in such an environment.

Immunity test

IEC 60601 test level

Compliance level

Electromagnetic environment – guidance

(for home healthcare environment)

Electrostatic discharge(ESD)

IEC 61000-4-2

Contact:±8 kV

Air±2 kV,±4 kV,±8

kV,±15 kV

Contact:±8 kV

Air±2 kV,±4 kV,±8

kV,±15 Kv

Floors should be wood, concrete or ceramic tile. If floors are covered

with synthetic material, the relative humidity should be at least 30%

Power frequency(50, 60 Hz)

magnetic field IEC 61000-4-8

30 A/m

50 Hz or 60 Hz

30 A/m

50 Hz and 60 Hz

The THD2FE power frequency magnetic fields should be at levels

characteristic of a typical location in a typical home healthcare

environment.

Manufacturer’s declaration – electromagnetic immunity

The THD2FE is intended for use in the electromagnetic environment (for home healthcare) specified below. The customer or the user of the THD2FE

should assure that it is used in such an environment.

Immunity test

IEC 60601 test level

Compliance

level

Electromagnetic environment – guidance

(for home healthcare environment)

Radiated RF

IEC 61000-4-3

10 V/m

80 MHz – 2,7 GHz

80 % AM at 1 kHz

10 V/m

80 MHz – 2,7

GHz

80 % AM at 1

kHz

Recommended separation distance:

d = 1,2

d = 1,2 80MHz to 800 MHz

d = 2,3 800MHz to 2,7 GHz

Where P is the maximum output power rating of the transmitter in watts (W) according to

the transmitter manufacturer and d is the recommended separation distance in metres

(m).

Field strengths from fixed RF transmitters, as determined by an electromagnetic site

survey, a should be less than the compliance level in each frequency range.b

Interference may occur in the vicinity of equipment marked with the following

symbol:

NOTE1 At 80 MHz and 800 MHz, the higher frequency range applies.

NOTE2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection from structures, objects

and people.

Field strengths from fixed transmitters, such as base stations for radio (cellular/cordless) telephones and land mobile radios, amateur radio, AM and FM

radio broadcast and TV broadcast cannot be predicted theoretically with accuracy. To assess the electromagnetic environment due to fixed RF

transmitters, an electromagnetic site survey should be considered. If the measured field strength in the location in which the THD2FE is used exceeds the

applicable RF compliance level above, the THD2FE should be observed to verify normal operation. If abnormal performance is observed, additional

measures may be necessary, such as re-orienting or relocating the THD2FE.

Recommended separation distances between

portable and mobile RF communications equipment and the THD2FE

800 MHz to 2,7 GHz

Where P is the maximum output power rating of the transmitter

in watts (W) according to the transmitter manufacturer and d is

the recommended separation distance in meters (m).

Field strengths from ﬁxed RF transmitters, as determined by an

electromagnetic site survey,

a) should be less than the compliance level in each frequency

range.

b) interference may occur in the vicinity of equipment marked

with the following symbol:

Symbol Descriptions

Caution

Please read the instructions for use

Battery Recycling

BF type applied part

Paper Recycling

Stand-by

IP22

Classification for water ingress and

particulate matter.

Manufacturer’s declaration-electromagnetic emissions

The THD2FE is intended for use in the electromagnetic environment (for home healthcare) specified below.The customer or the user of the THD2FE

should assure that it is used in such an environment.

Emissions test

Compliance

Electromagnetic environment – guidance

(for home healthcare environment)

RF emissions

CISPR 11

Group 1

The THD2FE uses RF energy only for its internal function. Therefore, its RF emissions are very

low and are not likely to cause any interference in nearby electronic equipment.

RF emissions

CISPR 11

Class B

The THD2FE is suitable for use in all establishments, including domestic establishments and

those directly connected to the public low-voltage power supply network that supplies buildings

used for domestic purposes.

Manufacturer’s declaration – electromagnetic immunity

The THD2FE is intended for use in the electromagnetic environment (for home healthcare) specified below. The customer or the user of the THD2FE

should assure that it is used in such an environment.

Immunity test

IEC 60601 test level

Compliance level

Electromagnetic environment – guidance

(for home healthcare environment)

Electrostatic discharge(ESD)

IEC 61000-4-2

Contact:±8 kV

Air±2 kV,±4 kV,±8

kV,±15 kV

Contact:±8 kV

Air±2 kV,±4 kV,±8

kV,±15 Kv

Floors should be wood, concrete or ceramic tile. If floors are covered

with synthetic material, the relative humidity should be at least 30%

Power frequency(50, 60 Hz)

magnetic field IEC 61000-4-8

30 A/m

50 Hz or 60 Hz

30 A/m

50 Hz and 60 Hz

The THD2FE power frequency magnetic fields should be at levels

characteristic of a typical location in a typical home healthcare

environment.

Manufacturer’s declaration – electromagnetic immunity

The THD2FE is intended for use in the electromagnetic environment (for home healthcare) specified below. The customer or the user of the THD2FE

should assure that it is used in such an environment.

Immunity test

IEC 60601 test level

Compliance

level

Electromagnetic environment – guidance

(for home healthcare environment)

Radiated RF

IEC 61000-4-3

10 V/m

80 MHz – 2,7 GHz

80 % AM at 1 kHz

10 V/m

80 MHz – 2,7

GHz

80 % AM at 1

kHz

Recommended separation distance:

d = 1,2

d = 1,2 80MHz to 800 MHz

d = 2,3 800MHz to 2,7 GHz

Where P is the maximum output power rating of the transmitter in watts (W ) according to

the transmitter manufacturer and d is the recommended separation distance in metres

(m).

Field strengths from fixed RF transmitters, as determined by an electromagnetic site

survey, a should be less than the compliance level in each frequency range.b

Interference may occur in the vicinity of equipment marked with the following

symbol:

NOTE1 At 80 MHz and 800 MHz, the higher frequency range applies.

NOTE2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection from structures, objects

and people.

Field strengths from fixed transmitters, such as base stations for radio (cellular/cordless) telephones and land mobile radios, amateur radio, AM and FM

radio broadcast and TV broadcast cannot be predicted theoretically with accuracy. To assess the electromagnetic environment d ue to fixed RF

transmitters, an electromagnetic site survey should be considered. If the measured field strength in the location in which the THD2FE is used exceeds the

applicable RF compliance level above, the THD2FE should be observed to verify normal operation. If abnormal performance is observed, additional

measures may be necessary, such as re-orienting or relocating the THD2FE.

Recommended separation distances between

portable and mobile RF communications equipment and the THD2FE

NOTE1 At 80 MHz and 800 MHz, the higher frequency range applies.

NOTE2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and

reﬂection from structures, objects and people.

Field strengths from ﬁxed transmitters, such as base stations for radio (cellular/cordless) telephones and land mobile

radios, amateur radio, AM and FM radio broadcast and TV broadcast cannot be predicted theoretically with accuracy.

To assess the electromagnetic environment due to ﬁxed RF transmitters, an electromagnetic site survey should be

considered. If the measured ﬁeld strength in the location in which the thermometer is used exceeds the applicable

RF compliance level above, it should be observed to verify normal operation. If abnormal performance is observed,

additional measures may be necessary, such as re-orienting or relocating the unit.

RECOMMENDED SEPARATION DISTANCES BETWEEN PORTABLE AND MOBILE RF COMMUNICATIONS EQUIPMENT

AND THE THERMOMETER

Intended for use in an electromagnetic environment (for home healthcare) in which radiated RF disturbances are

controlled. The customer or the user can help prevent electromagnetic interference by maintaining a minimum distance

between portable and mobile RF communications equipment (transmitters) and the unit as recommended below,

according to the maximum output power of the communications equipment.

6www.mastercool.com

RATED MAXIMUM OUTPUT

POWER OF TRANSMITTER

SEPARATION DISTANCE ACCORDING TO FREQUENCY OF TRANSMITTER

150 kHz to 80 MHz

d = 1,2

Symbol Descriptions

Caution

Please read the instructions for use

Battery Recycling

BF type applied part

Paper Recycling

Stand-by

IP22

Classification for water ingress and

particulate matter.

Manufacturer’s declaration-electromagnetic emissions

The THD2FE is intended for use in the electromagnetic environment (for home healthcare) specified below.The customer or the user of the THD2FE

should assure that it is used in such an environment.

Emissions test

Compliance

Electromagnetic environment – guidance

(for home healthcare environment)

RF emissions

CISPR 11

Group 1

The THD2FE uses RF energy only for its internal function. Therefore, its RF emissions are very

low and are not likely to cause any interference in nearby electronic equipment.

RF emissions

CISPR 11

Class B

The THD2FE is suitable for use in all establishments, including domestic establishments and

those directly connected to the public low-voltage power supply network that supplies buildings

used for domestic purposes.

Manufacturer’s declaration – electromagnetic immunity

The THD2FE is intended for use in the electromagnetic environment (for home healthcare) specified below. The customer or the user of the THD2FE

should assure that it is used in such an environment.

Immunity test

IEC 60601 test level

Compliance level

Electromagnetic environment – guidance

(for home healthcare environment)

Electrostatic discharge(ESD)

IEC 61000-4-2

Contact:±8 kV

Air±2 kV,±4 kV,±8

kV,±15 kV

Contact:±8 kV

Air±2 kV,±4 kV,±8

kV,±15 Kv

Floors should be wood, concrete or ceramic tile. If floors are covered

with synthetic material, the relative humidity should be at least 30%

Power frequency(50, 60 Hz)

magnetic field IEC 61000-4-8

30 A/m

50 Hz or 60 Hz

30 A/m

50 Hz and 60 Hz

The THD2FE power frequency magnetic fields should be at levels

characteristic of a typical location in a typical home healthcare

environment.

Manufacturer’s declaration – electromagnetic immunity

The THD2FE is intended for use in the electromagnetic environment (for home healthcare) specified below. The customer or the user of the THD2FE

should assure that it is used in such an environment.

Immunity test

IEC 60601 test level

Compliance

level

Electromagnetic environment – guidance

(for home healthcare environment)

Radiated RF

IEC 61000-4-3

10 V/m

80 MHz – 2,7 GHz

80 % AM at 1 kHz

10 V/m

80 MHz – 2,7

GHz

80 % AM at 1

kHz

Recommended separation distance:

d = 1,2

d = 1,2 80MHz to 800 MHz

d = 2,3 800MHz to 2,7 GHz

Where P is the maximum output power rating of the transmitter in watts (W) according to

the transmitter manufacturer and d is the recommended separation distance in metres

(m).

Field strengths from fixed RF transmitters, as determined by an electromagnetic site

survey, a should be less than the compliance level in each frequency range.b

Interference may occur in the vicinity of equipment marked with the following

symbol:

NOTE1 At 80 MHz and 800 MHz, the higher frequency range applies.

NOTE2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection from structures, objects

and people.

Field strengths from fixed transmitters, such as base stations for radio (cellular/cordless) telephones and land mobile radios, amateur radio, AM and FM

radio broadcast and TV broadcast cannot be predicted theoretically with accuracy. To assess the electromagnetic environment due to fixed RF

transmitters, an electromagnetic site survey should be considered. If the measured field strength in the location in which the THD2FE is used exceeds the

applicable RF compliance level above, the THD2FE should be observed to verify normal operation. If abnormal performance is observed, additional

measures may be necessary, such as re-orienting or relocating the THD2FE.

Recommended separation distances between

portable and mobile RF communications equipment and the THD2FE

80 MHz to 800 MHz

d = 1,2

Symbol Descriptions

Caution

Please read the instructions for use

Battery Recycling

BF type applied part

Paper Recycling

Stand-by

IP22

Classification for water ingress and

particulate matter.

Manufacturer’s declaration-electromagnetic emissions

The THD2FE is intended for use in the electromagnetic environment (for home healthcare) specified below.The customer or the user of the THD2FE

should assure that it is used in such an environment.

Emissions test

Compliance

Electromagnetic environment – guidance

(for home healthcare environment)

RF emissions

CISPR 11

Group 1

The THD2FE uses RF energy only for its internal function. Therefore, its RF emissions are very

low and are not likely to cause any interference in nearby electronic equipment.

RF emissions

CISPR 11

Class B

The THD2FE is suitable for use in all establishments, including domestic establishments and

those directly connected to the public low-voltage power supply network that supplies buildings

used for domestic purposes.

Manufacturer’s declaration – electromagnetic immunity

The THD2FE is intended for use in the electromagnetic environment (for home healthcare) specified below. The customer or the user of the THD2FE

should assure that it is used in such an environment.

Immunity test

IEC 60601 test level

Compliance level

Electromagnetic environment – guidance

(for home healthcare environment)

Electrostatic discharge(ESD)

IEC 61000-4-2

Contact:±8 kV

Air±2 kV,±4 kV,±8

kV,±15 kV

Contact:±8 kV

Air±2 kV,±4 kV,±8

kV,±15 Kv

Floors should be wood, concrete or ceramic tile. If floors are covered

with synthetic material, the relative humidity should be at least 30%

Power frequency(50, 60 Hz)

magnetic field IEC 61000-4-8

30 A/m

50 Hz or 60 Hz

30 A/m

50 Hz and 60 Hz

The THD2FE power frequency magnetic fields should be at levels

characteristic of a typical location in a typical home healthcare

environment.

Manufacturer’s declaration – electromagnetic immunity

The THD2FE is intended for use in the electromagnetic environment (for home healthcare) specified below. The customer or the user of the THD2FE

should assure that it is used in such an environment.

Immunity test

IEC 60601 test level

Compliance

level

Electromagnetic environment – guidance

(for home healthcare environment)

Radiated RF

IEC 61000-4-3

10 V/m

80 MHz – 2,7 GHz

80 % AM at 1 kHz

10 V/m

80 MHz – 2,7

GHz

80 % AM at 1

kHz

Recommended separation distance:

d = 1,2

d = 1,2 80MHz to 800 MHz

d = 2,3 800MHz to 2,7 GHz

Where P is the maximum output power rating of the transmitter in watts (W) according to

the transmitter manufacturer and d is the recommended separation distance in metres

(m).

Field strengths from fixed RF transmitters, as determined by an electromagnetic site

survey, a should be less than the compliance level in each frequency range.b

Interference may occur in the vicinity of equipment marked with the following

symbol:

NOTE1 At 80 MHz and 800 MHz, the higher frequency range applies.

NOTE2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection from structures, objects

and people.

Field strengths from fixed transmitters, such as base stations for radio (cellular/cordless) telephones and land mobile radios, amateur radio, AM and FM

radio broadcast and TV broadcast cannot be predicted theoretically with accuracy. To assess the electromagnetic environment due to fixed RF

transmitters, an electromagnetic site survey should be considered. If the measured field strength in the location in which the THD2FE is used exceeds the

applicable RF compliance level above, the THD2FE should be observed to verify normal operation. If abnormal performance is observed, additional

measures may be necessary, such as re-orienting or relocating the THD2FE.

Recommended separation distances between

portable and mobile RF communications equipment and the THD2FE

800 MHz to 2,7 GHz

d = 2,3

Symbol Descriptions

Caution

Please read the instructions for use

Battery Recycling

BF type applied part

Paper Recycling

Stand-by

IP22

Classification for water ingress and

particulate matter.

Manufacturer’s declaration-electromagnetic emissions

The THD2FE is intended for use in the electromagnetic environment (for home healthcare) specified below.The customer or the user of the THD2FE

should assure that it is used in such an environment.

Emissions test

Compliance

Electromagnetic environment – guidance

(for home healthcare environment)

RF emissions

CISPR 11

Group 1

The THD2FE uses RF energy only for its internal function. Therefore, its RF emissions are very

low and are not likely to cause any interference in nearby electronic equipment.

RF emissions

CISPR 11

Class B

The THD2FE is suitable for use in all establishments, including domestic establishments and

those directly connected to the public low-voltage power supply network that supplies buildings

used for domestic purposes.

Manufacturer’s declaration – electromagnetic immunity

The THD2FE is intended for use in the electromagnetic environment (for home healthcare) specified below. The customer or the user of the THD2FE

should assure that it is used in such an environment.

Immunity test

IEC 60601 test level

Compliance level

Electromagnetic environment – guidance

(for home healthcare environment)

Electrostatic discharge(ESD)

IEC 61000-4-2

Contact:±8 kV

Air±2 kV,±4 kV,±8

kV,±15 kV

Contact:±8 kV

Air±2 kV,±4 kV,±8

kV,±15 Kv

Floors should be wood, concrete or ceramic tile. If floors are covered

with synthetic material, the relative humidity should be at least 30%

Power frequency(50, 60 Hz)

magnetic field IEC 61000-4-8

30 A/m

50 Hz or 60 Hz

30 A/m

50 Hz and 60 Hz

The THD2FE power frequency magnetic fields should be at levels

characteristic of a typical location in a typical home healthcare

environment.

Manufacturer’s declaration – electromagnetic immunity

The THD2FE is intended for use in the electromagnetic environment (for home healthcare) specified below. The customer or the user of the THD2FE

should assure that it is used in such an environment.

Immunity test

IEC 60601 test level

Compliance

level

Electromagnetic environment – guidance

(for home healthcare environment)

Radiated RF

IEC 61000-4-3

10 V/m

80 MHz – 2,7 GHz

80 % AM at 1 kHz

10 V/m

80 MHz – 2,7

GHz

80 % AM at 1

kHz

Recommended separation distance:

d = 1,2

d = 1,2 80MHz to 800 MHz

d = 2,3 800MHz to 2,7 GHz

Where P is the maximum output power rating of the transmitter in watts (W) according to

the transmitter manufacturer and d is the recommended separation distance in metres

(m).

Field strengths from fixed RF transmitters, as determined by an electromagnetic site

survey, a should be less than the compliance level in each frequency range.b

Interference may occur in the vicinity of equipment marked with the following

symbol:

NOTE1 At 80 MHz and 800 MHz, the higher frequency range applies.

NOTE2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection from structures, objects

and people.

Field strengths from fixed transmitters, such as base stations for radio (cellular/cordless) telephones and land mobile radios, amateur radio, AM and FM

radio broadcast and TV broadcast cannot be predicted theoretically with accuracy. To assess the electromagnetic environment due to fixed RF

transmitters, an electromagnetic site survey should be considered. If the measured field strength in the location in which the THD2FE is used exceeds the

applicable RF compliance level above, the THD2FE should be observed to verify normal operation. If abnormal performance is observed, additional

measures may be necessary, such as re-orienting or relocating the THD2FE.

Recommended separation distances between

portable and mobile RF communications equipment and the THD2FE

0,01 N/A 0,12 0,23

0,1 N/A 0,38 0,73

1 N/A 1,2 2,3

10 N/A 3,8 7,3

100 N/A 12 23

For transmitters rated at a maximum output power not listed above, the recommended separation distance d in meters

(m) can be estimated using the equation applicable to the frequency of the transmitter, where P is the maximum output

power rating of the transmitter in watts (W) according to the transmitter manufacturer.

NOTE 1 At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.

NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and

reﬂection from structures, objects and people.

MANUFACTURER’S DECLARATION-ELECTROMAGNETIC IMMUNITY TEST SPECIFICATIONS FOR ENCLOSURE PORT

IMMUNITY TO RF WIRELESS COMMUNICATIONS EQUIPMENT

Intended for use in the electromagnetic environment (for home healthcare) speciﬁed below. The customer or the user

should assure that it is used in such an environment.

TEST

FREQUENCY

(MHz)

BAND a)

(MHz)

SERVICE

MODULATION

MAXIMUM

POWER

(W)

DISTANCE

(m)

IMMUNITY

TEST

LEVEL

(V/m)

COMPLIANCE

LEVEL (V/m)

(for home health-

care)

385 380 -

390 TETRA 400 Pulse modula-

tion b) 18 Hz 1,8 0,3 27 27

450 430 -

470

GMRS 460,

FRS 460

FM c)

±5 kHz deviation

1 kHz sine

2 0,3 28 28

710 704 -

787 LTE Band 13,17

Pulse

modulation b)

217 Hz

0,2 0,3 9 9745

780

810

800 -

960

GSM 800/900,

TETRA 800, iDEN

820, CDMA 850, LTE

Band 5

Pulse

modulation b)

18 Hz

2 0,3 28 28

870

930

1720

1700 -

1990

GSM 1800; CDMA

1900; GSM 1900;

DECT;

LTE Band 1, 3,

4, 25; UMTS

Pulse modula-

tion b) 217 Hz 2 0,3 28 28

1845

1970

2450 2400 -

2570

Bluetooth,

WLAN,

802.11 b/g/n,

RFID 2450,

LTE Band 7

Pulse

modulation b)

217 Hz

2 0,3 28 28

5240 5100 -

5800

WLAN 802.11

a/n

Pulse

modulation b)

217 Hz

0,2 0,3 9 95500

5785

NOTE If necessary to achieve the IMMUNITY TEST LEVEL, the distance between the transmitting antenna and the ME

EQUIPMENT or ME SYSTEM may be reduced to 1 m. The 1 m test distance is permitted by IEC 61000-4-3.

a) For some services, only the uplink frequencies are included.

b) The carrier shall be modulated using a 50% duty cycle square wave signal.

c) As an alternative to FM modulation, 50% pulse modulation at 18 Hz may be used because while it does not represent

actual modulation, it would be worst case.

7www.mastercool.com

MEDIZINISCHES MULTIFUNKTIONS-/OBERFLÄCHEN-INFRAROT-THERMOMETER

SPEZIFIKATIONEN:

• Temperaturmessbereich:

Stirn-Modus: 34 bis 42,2°C (93,2 bis 108°F)

Oberﬂächen-Modus: -22 bis 80°C (-7,6 bis 176°F)

• Betriebstemperaturbereich: 10 is 40°C (50 bis 104°F),

15% bis 85% Relative Feuchte

• Lagertemperatur: aufbewahrt bei Raumtemperatur zwischen

-20 bis 50°C Rel. Feuchte<85%

Transporttemperatur muss weniger als 70°C (158°F),

Rel. Feuchte<95%, betragen

• Atmosphärendruck: 800 bis 1013 hPa

• Genauigkeit:

Stirn-Modus: ± 0.2°C (0,4°F) zwischen 35 und 42°C (95 bis 107,6°F)

(Umgebungstemperatur: 15 bis 35°C (59 bis 95°F), ±0.3°C (0.5°F) für

anderen Bereich Oberﬂächen-Modus: ±0.3°C (59 bis 95°F) innerhalb

22 bis 42,2°C (71,6 bis 108F), andere ±4% oder ±2°C (4°F) , je nachdem, was höher ist

• Batterie: AAA x 2 St.

• Batterielaufzeit: ca. 3.000 kontinuierliche Ablesungen

• Erwartete Brauchbarkeitsdauer: 4 Jahre

• Blaue LED-Hintergrundleuchte: automatische Einschaltung nach der Messung und nach 5 Sekunden automatische

Abschaltung

• Schutzklasse: IP22

ANMERKUNG: Das Thermometer wird zum Zeitpunkt der Herstellung kalibriert. Falls Sie zu irgendeinem Zeitpunkt

den Kalibriermodus, die Genauigkeit der Temperaturmessungen oder unerwartete Ereignisse in Frage stellen, dann

kontaktieren Sie bitte den Kundendienst.

Warnhinweis: Keine Modiﬁzierung dieser Ausrüstung ist zulässig.

Warnhinweis: Tauchen Sie das Gerät nicht in Flüssigkeiten ein oder setzen Sie es direkter Feuchtigkeit aus.

FUNKTIONEN

STIRNTEMPERATUR:

Dieses Thermometer ist nicht dafür gedacht, einen Arztbesuch zu ersetzen. Bitte denken Sie auch

daran, das Messergebnis mit Ihrer normalen Körpertemperatur zu vergleichen. Bitte konsultieren Sie

einen Arzt, falls Sie gesundheitliche Bedenken haben.

• Bitte schlagen Sie im Abschnitt “VERWENDUNG DES THERMOMETERS” nach, um zu erfahren, wie

die Körpertemperatur zu messen ist.

THD2FE Non-contact Forehead Thermometer

Functions

Forehead temperature

The thermometer has been designed for home use. It’s not meant to replace a visit to the

doctor. Please also remember to compare the measurement result to your regular body

temperature. Please consult with doctor if you have health concerns.

àPlease see the “Use of the thermometer” section to learn how to measure the body

temperature.

Surface temperature

The surface mode shows the actual and unadjusted surface temperature which is different from

the body temperature. It can help you monitor if the object temperature is suitable for the baby

or patient, for example the baby’s milk.

àPlease see the “Use of the thermometer” section to learn how to measure the object

temperature.

Temperature indicator

If the thermometer detects a temperature ≧99.5°F (or 37.5°C) under forehead mode, three

short beep sound will follow one long beep sound to warn the user for the temperature is above

99.5°F (37.5°C).

Memory locations

There are total 25 sets of measurement condition for body temperature.

àWhen power on, press the “ON/MEM” button to see the temperature records with icon.

°F / °C switch

In “Power Off” mode, press and hold the “START” button, then press the “ON/MEM” button for

3 seconds, icon “°F” will be switched to icon “°C”. You can also use the same process to

change the LCD display from °C to °F.

NOTE: Memory clear and Celsius/Fahrenheit switch are together. When you switch Celsius and

Fahrenheit, the Memory will be cleared.

Mute mode

The device setting with buzzer is on, you can set buzzer on/off under Mute mode.

When power on, press and hold the “ON/MEM” button for 3 seconds. The icon will flash on

the LCD screen and then release the “ON/MEM” button to set MUTE. Thus you will not hear

beep sounds. You can also use the same process to turn off the Mute function.

NOTE: If keep pressing "ON/MEN" button for 2 seconds after icon flashing, the device will

be power off WITHOUT setting Mute.

Use of the thermometer

Note: If there is any temperature difference between the places where the device is stored and where you are going to measure, subject and the device should

stay in the same room for at least 15 minutes before measurement.

1. Always make sure the probe lens is clean without any damage and the forehead is clean.

Warning: Choking from swallowing small parts and batteries by children or pets is possible, please keep small parts and batteries at places where

children and pets can’t reach.

2. Power on:

Press the “ON/MEM” button (see figure 1).

3. Measuring body temperature on the forehead:

Indications for use:

The Non-contact Clinical Thermometer, Model THD2FE is an infrared thermometer intended

for the intermittent measurement of human body temperature in people of all ages.

Intended operator:

At least 11 years old (5 years intensive reading experience), no maximum.

Specifications

þ Temperature measurement range:

Forehead mode: 93.2~108°F (34~42.2°C)

Surface mode: -7.6~176°F (-22~80°C)

þ Operating temperature range: 50~104°F (10~40°C), 15%~85% RH

þ Storage temperature range: It should be stored at room temperature between -4~122°F

(-20~+50°C), RH≦85%

Transportation temperature shall be less than 158°F (70°C), RH≦95%

þ Atmospheric pressure: 800~1013 hPa

þ Comply with ASTM E1965-98, EN ISO 80601-2-56, IEC/EN60601-1-2(EMC),

IEC/EN60601-1(Safety) standards, ISO10993, RoHS.

þ Accuracy:

Forehead mode: ±0.4 oF (0.2 °C ) within 95~107.6°F (35~42°C),

±0.5 oF (0.3 °C ) for other range.

Surface mode: ±0.5°F (0.3°C) within 71.6~108°F (22~42.2°C),

others ±4% or ±4°F (2°C) whichever is greater.

þ Temperature indicator, memory and °F / °C switch function

þ Battery: AAA x 2 pcs

þ Battery life: around 3,000 continuous readings.

þ Expected Service Life: 4 years

þ This thermometer converts the forehead temperature to display its “oral equivalent.”

(according to the result of the clinical evaluation to get the offset value)

þ Blue LED Backlight

Blue LED backlight will be automatically turned on after measurement, and automatically

turned off after 2 seconds.

þ Enclosure Rating: IP22

þ Dimensions: 158.0 x 48.0 x 40.2 mm

þ Weight: 100 grams including battery

The device should not submerge into any liquids and expose it to direct moisture.

There is no gender and age limitation for using the infrared thermometer.

This is not an AP or APG product.

Figure 1

OBERFLÄCHENTEMPERATUR:

Der Oberﬂächen-Modus zeigt die tatsächliche, unbereinigte Oberﬂächentemperatur, die sich von der

Körpertemperatur unterscheidet.

• Bitte schlagen Sie im Abschnitt “VERWENDUNG DES THERMOMETERS” nach, um zu erfahren, wie

die Körpertemperatur zu messen ist.

THD2FE Non-contact Forehead Thermometer

Functions

Forehead temperature

The thermometer has been designed for home use. It’s not meant to replace a visit to the

doctor. Please also remember to compare the measurement result to your regular body

temperature. Please consult with doctor if you have health concerns.

àPlease see the “Use of the thermometer” section to learn how to measure the body

temperature.

Surface temperature

The surface mode shows the actual and unadjusted surface temperature which is different from

the body temperature. It can help you monitor if the object temperature is suitable for the baby

or patient, for example the baby’s milk.

àPlease see the “Use of the thermometer” section to learn how to measure the object

temperature.

Temperature indicator

If the thermometer detects a temperature ≧99.5°F (or 37.5°C) under forehead mode, three

short beep sound will follow one long beep sound to warn the user for the temperature is above

99.5°F (37.5°C).

Memory locations

There are total 25 sets of measurement condition for body temperature.

àWhen power on, press the “ON/MEM” button to see the temperature records with icon.

°F / °C switch

In “Power Off” mode, press and hold the “START” button, then press the “ON/MEM” button for

3 seconds, icon “°F” will be switched to icon “°C”. You can also use the same process to

change the LCD display from °C to °F.

NOTE: Memory clear and Celsius/Fahrenheit switch are together. When you switch Celsius and

Fahrenheit, the Memory will be cleared.

Mute mode

The device setting with buzzer is on, you can set buzzer on/off under Mute mode.

When power on, press and hold the “ON/MEM” button for 3 seconds. The icon will flash on

the LCD screen and then release the “ON/MEM” button to set MUTE. Thus you will not hear

beep sounds. You can also use the same process to turn off the Mute function.

NOTE: If keep pressing "ON/MEN" button for 2 seconds after icon flashing, the device will

be power off WITHOUT setting Mute.

Use of the thermometer

Note: If there is any temperature difference between the places where the device is stored and where you are going to measure, subject and the device should

stay in the same room for at least 15 minutes before measurement.

1. Always make sure the probe lens is clean without any damage and the forehead is clean.

Warning: Choking from swallowing small parts and batteries by children or pets is possible, please keep small parts and batteries at places where

children and pets can’t reach.

2. Power on:

Press the “ON/MEM” button (see figure 1).

3. Measuring body temperature on the forehead:

Indications for use:

The Non-contact Clinical Thermometer, Model THD2FE is an infrared thermometer intended

for the intermittent measurement of human body temperature in people of all ages.

Intended operator:

At least 11 years old (5 years intensive reading experience), no maximum.

Specifications

þ Temperature measurement range:

Forehead mode: 93.2~108°F (34~42.2°C)

Surface mode: -7.6~176°F (-22~80°C)

þ Operating temperature range: 50~104°F (10~40°C), 15%~85% RH

þ Storage temperature range: It should be stored at room temperature between -4~122°F

(-20~+50°C), RH≦85%

Transportation temperature shall be less than 158°F (70°C), RH≦95%

þ Atmospheric pressure: 800~1013 hPa

þ Comply with ASTM E1965-98, EN ISO 80601-2-56, IEC/EN60601-1-2(EMC),

IEC/EN60601-1(Safety) standards, ISO10993, RoHS.

þ Accuracy:

Forehead mode: ±0.4 oF (0.2 °C ) within 95~107.6°F (35~42°C),

±0.5 oF (0.3 °C ) for other range.

Surface mode: ±0.5°F (0.3°C) within 71.6~108°F (22~42.2°C),

others ±4% or ±4°F (2°C) whichever is greater.

þ Temperature indicator, memory and °F / °C switch function

þ Battery: AAA x 2 pcs

þ Battery life: around 3,000 continuous readings.

þ Expected Service Life: 4 years

þ This thermometer converts the forehead temperature to display its “oral equivalent.”

(according to the result of the clinical evaluation to get the offset value)

þ Blue LED Backlight

Blue LED backlight will be automatically turned on after measurement, and automatically

turned off after 2 seconds.

þ Enclosure Rating: IP22

þ Dimensions: 158.0 x 48.0 x 40.2 mm

þ Weight: 100 grams including battery

The device should not submerge into any liquids and expose it to direct moisture.

There is no gender and age limitation for using the infrared thermometer.

This is not an AP or APG product.

Figure 1

TEMPERATURANZEIGE:

Falls das Thermometer im Stirn-Modus eine Temperatur von > 37,5°C (oder 4°F) ermittelt, erklingen

drei kurze Pieptöne, gefolgt von einem langen Piepton, um den Benutzer zu warnen, dass die

Temperatur über 37,5°C liegt.

THD2FE Non-contact Forehead Thermometer

Functions

Forehead temperature

The thermometer has been designed for home use. It’s not meant to replace a visit to the

doctor. Please also remember to compare the measurement result to your regular body

temperature. Please consult with doctor if you have health concerns.

àPlease see the “Use of the thermometer” section to learn how to measure the body

temperature.

Surface temperature

The surface mode shows the actual and unadjusted surface temperature which is different from

the body temperature. It can help you monitor if the object temperature is suitable for the baby

or patient, for example the baby’s milk.

àPlease see the “Use of the thermometer” section to learn how to measure the object

temperature.

Temperature indicator

If the thermometer detects a temperature ≧99.5°F (or 37.5°C) under forehead mode, three

short beep sound will follow one long beep sound to warn the user for the temperature is above

99.5°F (37.5°C).

Memory locations

There are total 25 sets of measurement condition for body temperature.

àWhen power on, press the “ON/MEM” button to see the temperature records with icon.

°F / °C switch

In “Power Off” mode, press and hold the “START” button, then press the “ON/MEM” button for

3 seconds, icon “°F” will be switched to icon “°C”. You can also use the same process to

change the LCD display from °C to °F.

NOTE: Memory clear and Celsius/Fahrenheit switch are together. When you switch Celsius and

Fahrenheit, the Memory will be cleared.

Mute mode

The device setting with buzzer is on, you can set buzzer on/off under Mute mode.

When power on, press and hold the “ON/MEM” button for 3 seconds. The icon will flash on

the LCD screen and then release the “ON/MEM” button to set MUTE. Thus you will not hear

beep sounds. You can also use the same process to turn off the Mute function.

NOTE: If keep pressing "ON/MEN" button for 2 seconds after icon flashing, the device will

be power off WITHOUT setting Mute.

Use of the thermometer

Note: If there is any temperature difference between the places where the device is stored and where you are going to measure, subject and the device should

stay in the same room for at least 15 minutes before measurement.

1. Always make sure the probe lens is clean without any damage and the forehead is clean.

Warning: Choking from swallowing small parts and batteries by children or pets is possible, please keep small parts and batteries at places where

children and pets can’t reach.

2. Power on:

Press the “ON/MEM” button (see figure 1).

3. Measuring body temperature on the forehead:

Indications for use:

The Non-contact Clinical Thermometer, Model THD2FE is an infrared thermometer intended

for the intermittent measurement of human body temperature in people of all ages.

Intended operator:

At least 11 years old (5 years intensive reading experience), no maximum.

Specifications

þ Temperature measurement range:

Forehead mode: 93.2~108°F (34~42.2°C)

Surface mode: -7.6~176°F (-22~80°C)

þ Operating temperature range: 50~104°F (10~40°C), 15%~85% RH

þ Storage temperature range: It should be stored at room temperature between -4~122°F

(-20~+50°C), RH≦85%

Transportation temperature shall be less than 158°F (70°C), RH≦95%

þ Atmospheric pressure: 800~1013 hPa

þ Comply with ASTM E1965-98, EN ISO 80601-2-56, IEC/EN60601-1-2(EMC),

IEC/EN60601-1(Safety) standards, ISO10993, RoHS.

þ Accuracy:

Forehead mode: ±0.4 oF (0.2 °C ) within 95~107.6°F (35~42°C),

±0.5 oF (0.3 °C ) for other range.

Surface mode: ±0.5°F (0.3°C) within 71.6~108°F (22~42.2°C),

others ±4% or ±4°F (2°C) whichever is greater.

þ Temperature indicator, memory and °F / °C switch function

þ Battery: AAA x 2 pcs

þ Battery life: around 3,000 continuous readings.

þ Expected Service Life: 4 years

þ This thermometer converts the forehead temperature to display its “oral equivalent.”

(according to the result of the clinical evaluation to get the offset value)

þ Blue LED Backlight

Blue LED backlight will be automatically turned on after measurement, and automatically

turned off after 2 seconds.

þ Enclosure Rating: IP22

þ Dimensions: 158.0 x 48.0 x 40.2 mm

þ Weight: 100 grams including battery

The device should not submerge into any liquids and expose it to direct moisture.

There is no gender and age limitation for using the infrared thermometer.

This is not an AP or APG product.

Figure 1

SPEICHERPOSITIONEN:

Es gibt 25 Sätze von Messbedingungen für die Körpertemperatur.

• Drücken Sie bei eingeschaltetem Netzstrom auf die Taste “ON/MEM”, um die

Temperaturaufzeichnungen mit dem

THD2FE Non-contact Forehead Thermometer

Functions

Forehead temperature

The thermometer has been designed for home use. It’s not meant to replace a visit to the

doctor. Please also remember to compare the measurement result to your regular body

temperature. Please consult with doctor if you have health concerns.

àPlease see the “Use of the thermometer” section to learn how to measure the body

temperature.

Surface temperature

The surface mode shows the actual and unadjusted surface temperature which is different from

the body temperature. It can help you monitor if the object temperature is suitable for the baby

or patient, for example the baby’s milk.

àPlease see the “Use of the thermometer” section to learn how to measure the object

temperature.

Temperature indicator

If the thermometer detects a temperature ≧99.5°F (or 37.5°C) under forehead mode, three

short beep sound will follow one long beep sound to warn the user for the temperature is above

99.5°F (37.5°C).

Memory locations

There are total 25 sets of measurement condition for body temperature.

àWhen power on, press the “ON/MEM” button to see the temperature records with icon.

°F / °C switch

In “Power Off” mode, press and hold the “START” button, then press the “ON/MEM” button for

3 seconds, icon “°F” will be switched to icon “°C”. You can also use the same process to

change the LCD display from °C to °F.

NOTE: Memory clear and Celsius/Fahrenheit switch are together. When you switch Celsius and

Fahrenheit, the Memory will be cleared.

Mute mode

The device setting with buzzer is on, you can set buzzer on/off under Mute mode.

When power on, press and hold the “ON/MEM” button for 3 seconds. The icon will flash on

the LCD screen and then release the “ON/MEM” button to set MUTE. Thus you will not hear

beep sounds. You can also use the same process to turn off the Mute function.

NOTE: If keep pressing "ON/MEN" button for 2 seconds after icon flashing, the device will

be power off WITHOUT setting Mute.

Use of the thermometer

Note: If there is any temperature difference between the places where the device is stored and where you are going to measure, subject and the device should

stay in the same room for at least 15 minutes before measurement.

1. Always make sure the probe lens is clean without any damage and the forehead is clean.

Warning: Choking from swallowing small parts and batteries by children or pets is possible, please keep small parts and batteries at places where

children and pets can’t reach.

2. Power on:

Press the “ON/MEM” button (see figure 1).

3. Measuring body temperature on the forehead:

Indications for use:

The Non-contact Clinical Thermometer, Model THD2FE is an infrared thermometer intended

for the intermittent measurement of human body temperature in people of all ages.

Intended operator:

At least 11 years old (5 years intensive reading experience), no maximum.

Specifications

þ Temperature measurement range:

Forehead mode: 93.2~108°F (34~42.2°C)

Surface mode: -7.6~176°F (-22~80°C)

þ Operating temperature range: 50~104°F (10~40°C), 15%~85% RH

þ Storage temperature range: It should be stored at room temperature between -4~122°F

(-20~+50°C), RH≦85%

Transportation temperature shall be less than 158°F (70°C), RH≦95%

þ Atmospheric pressure: 800~1013 hPa

þ Comply with ASTM E1965-98, EN ISO 80601-2-56, IEC/EN60601-1-2(EMC),

IEC/EN60601-1(Safety) standards, ISO10993, RoHS.

þ Accuracy:

Forehead mode: ±0.4 oF (0.2 °C ) within 95~107.6°F (35~42°C),

±0.5 oF (0.3 °C ) for other range.

Surface mode: ±0.5°F (0.3°C) within 71.6~108°F (22~42.2°C),

others ±4% or ±4°F (2°C) whichever is greater.

þ Temperature indicator, memory and °F / °C switch function

þ Battery: AAA x 2 pcs

þ Battery life: around 3,000 continuous readings.

þ Expected Service Life: 4 years

þ This thermometer converts the forehead temperature to display its “oral equivalent.”

(according to the result of the clinical evaluation to get the offset value)

þ Blue LED Backlight

Blue LED backlight will be automatically turned on after measurement, and automatically

turned off after 2 seconds.

þ Enclosure Rating: IP22

þ Dimensions: 158.0 x 48.0 x 40.2 mm

þ Weight: 100 grams including battery

The device should not submerge into any liquids and expose it to direct moisture.

There is no gender and age limitation for using the infrared thermometer.

This is not an AP or APG product.

Figure 1

Symbol zu sehen.

THD2FE Non-contact Forehead Thermometer

Functions

Forehead temperature

The thermometer has been designed for home use. It’s not meant to replace a visit to the

doctor. Please also remember to compare the measurement result to your regular body

temperature. Please consult with doctor if you have health concerns.

àPlease see the “Use of the thermometer” section to learn how to measure the body

temperature.

Surface temperature

The surface mode shows the actual and unadjusted surface temperature which is different from

the body temperature. It can help you monitor if the object temperature is suitable for the baby

or patient, for example the baby’s milk.

àPlease see the “Use of the thermometer” section to learn how to measure the object

temperature.

Temperature indicator

If the thermometer detects a temperature ≧99.5°F (or 37.5°C) under forehead mode, three

short beep sound will follow one long beep sound to warn the user for the temperature is above

99.5°F (37.5°C).

Memory locations

There are total 25 sets of measurement condition for body temperature.

àWhen power on, press the “ON/MEM” button to see the temperature records with icon.

°F / °C switch

In “Power Off” mode, press and hold the “START” button, then press the “ON/MEM” button for

3 seconds, icon “°F” will be switched to icon “°C”. You can also use the same process to

change the LCD display from °C to °F.

NOTE: Memory clear and Celsius/Fahrenheit switch are together. When you switch Celsius and

Fahrenheit, the Memory will be cleared.

Mute mode

The device setting with buzzer is on, you can set buzzer on/off under Mute mode.

When power on, press and hold the “ON/MEM” button for 3 seconds. The icon will flash on

the LCD screen and then release the “ON/MEM” button to set MUTE. Thus you will not hear

beep sounds. You can also use the same process to turn off the Mute function.

NOTE: If keep pressing "ON/MEN" button for 2 seconds after icon flashing, the device will

be power off WITHOUT setting Mute.

Use of the thermometer

Note: If there is any temperature difference between the places where the device is stored and where you are going to measure, subject and the device should

stay in the same room for at least 15 minutes before measurement.

1. Always make sure the probe lens is clean without any damage and the forehead is clean.

Warning: Choking from swallowing small parts and batteries by children or pets is possible, please keep small parts and batteries at places where

children and pets can’t reach.

2. Power on:

Press the “ON/MEM” button (see figure 1).

3. Measuring body temperature on the forehead:

Indications for use:

The Non-contact Clinical Thermometer, Model THD2FE is an infrared thermometer intended

for the intermittent measurement of human body temperature in people of all ages.

Intended operator:

At least 11 years old (5 years intensive reading experience), no maximum.

Specifications

þ Temperature measurement range:

Forehead mode: 93.2~108°F (34~42.2°C)

Surface mode: -7.6~176°F (-22~80°C)

þ Operating temperature range: 50~104°F (10~40°C), 15%~85% RH

þ Storage temperature range: It should be stored at room temperature between -4~122°F

(-20~+50°C), RH≦85%

Transportation temperature shall be less than 158°F (70°C), RH≦95%

þ Atmospheric pressure: 800~1013 hPa

þ Comply with ASTM E1965-98, EN ISO 80601-2-56, IEC/EN60601-1-2(EMC),

IEC/EN60601-1(Safety) standards, ISO10993, RoHS.

þ Accuracy:

Forehead mode: ±0.4 oF (0.2 °C ) within 95~107.6°F (35~42°C),

±0.5 oF (0.3 °C ) for other range.

Surface mode: ±0.5°F (0.3°C) within 71.6~108°F (22~42.2°C),

others ±4% or ±4°F (2°C) whichever is greater.

þ Temperature indicator, memory and °F / °C switch function

þ Battery: AAA x 2 pcs

þ Battery life: around 3,000 continuous readings.

þ Expected Service Life: 4 years

þ This thermometer converts the forehead temperature to display its “oral equivalent.”

(according to the result of the clinical evaluation to get the offset value)

þ Blue LED Backlight

Blue LED backlight will be automatically turned on after measurement, and automatically

turned off after 2 seconds.

þ Enclosure Rating: IP22

þ Dimensions: 158.0 x 48.0 x 40.2 mm

þ Weight: 100 grams including battery

The device should not submerge into any liquids and expose it to direct moisture.

There is no gender and age limitation for using the infrared thermometer.

This is not an AP or APG product.

Figure 1

START

STAND-BY

(ON-MEM)

LCD

BATTERIEAB-

DECKUNG

SONDENGLAS

Deutsch

8www.mastercool.com

˚F / ˚C: Drücken Sie im abgeschalteten („power off“) Modus die Taste „START“ und halten Sie diese

gedrückt, drücken Sie dann die „ON/MEM“-Taste 3 Sekunden lang. Das „°F“-Symbol wechselt dann zum

„°C“-Symbol. Sie können den gleichen Prozess verwenden, um die LCD-Anzeige von °C zu °F zu ändern.

ANMERKUNG: Speicher löschen- und Celsius/Fahrenheit-Taste sind beieinander. Wenn Sie zwischen

Celsius- und Fahrenheit-Anzeige wechseln, wird auch der Speicher gelöscht.

THD2FE Non-contact Forehead Thermometer

Functions

Forehead temperature

The thermometer has been designed for home use. It’s not meant to replace a visit to the

doctor. Please also remember to compare the measurement result to your regular body

temperature. Please consult with doctor if you have health concerns.

àPlease see the “Use of the thermometer” section to learn how to measure the body

temperature.

Surface temperature

The surface mode shows the actual and unadjusted surface temperature which is different from

the body temperature. It can help you monitor if the object temperature is suitable for the baby

or patient, for example the baby’s milk.

àPlease see the “Use of the thermometer” section to learn how to measure the object

temperature.

Temperature indicator

If the thermometer detects a temperature ≧99.5°F (or 37.5°C) under forehead mode, three

short beep sound will follow one long beep sound to warn the user for the temperature is above

99.5°F (37.5°C).

Memory locations

There are total 25 sets of measurement condition for body temperature.

àWhen power on, press the “ON/MEM” button to see the temperature records with icon.

°F / °C switch

In “Power Off” mode, press and hold the “START” button, then press the “ON/MEM” button for

3 seconds, icon “°F” will be switched to icon “°C”. You can also use the same process to

change the LCD display from °C to °F.

NOTE: Memory clear and Celsius/Fahrenheit switch are together. When you switch Celsius and

Fahrenheit, the Memory will be cleared.

Mute mode

The device setting with buzzer is on, you can set buzzer on/off under Mute mode.

When power on, press and hold the “ON/MEM” button for 3 seconds. The icon will flash on

the LCD screen and then release the “ON/MEM” button to set MUTE. Thus you will not hear

beep sounds. You can also use the same process to turn off the Mute function.

NOTE: If keep pressing "ON/MEN" button for 2 seconds after icon flashing, the device will

be power off WITHOUT setting Mute.

Use of the thermometer

Note: If there is any temperature difference between the places where the device is stored and where you are going to measure, subject and the device should

stay in the same room for at least 15 minutes before measurement.

1. Always make sure the probe lens is clean without any damage and the forehead is clean.

Warning: Choking from swallowing small parts and batteries by children or pets is possible, please keep small parts and batteries at places where

children and pets can’t reach.

2. Power on:

Press the “ON/MEM” button (see figure 1).

3. Measuring body temperature on the forehead:

Indications for use:

The Non-contact Clinical Thermometer, Model THD2FE is an infrared thermometer intended

for the intermittent measurement of human body temperature in people of all ages.

Intended operator:

At least 11 years old (5 years intensive reading experience), no maximum.

Specifications

þ Temperature measurement range:

Forehead mode: 93.2~108°F (34~42.2°C)

Surface mode: -7.6~176°F (-22~80°C)

þ Operating temperature range: 50~104°F (10~40°C), 15%~85% RH

þ Storage temperature range: It should be stored at room temperature between -4~122°F

(-20~+50°C), RH≦85%

Transportation temperature shall be less than 158°F (70°C), RH≦95%

þ Atmospheric pressure: 800~1013 hPa

þ Comply with ASTM E1965-98, EN ISO 80601-2-56, IEC/EN60601-1-2(EMC),

IEC/EN60601-1(Safety) standards, ISO10993, RoHS.

þ Accuracy:

Forehead mode: ±0.4 oF (0.2 °C ) within 95~107.6°F (35~42°C),

±0.5 oF (0.3 °C ) for other range.

Surface mode: ±0.5°F (0.3°C) within 71.6~108°F (22~42.2°C),

others ±4% or ±4°F (2°C) whichever is greater.

þ Temperature indicator, memory and °F / °C switch function

þ Battery: AAA x 2 pcs

þ Battery life: around 3,000 continuous readings.

þ Expected Service Life: 4 years

þ This thermometer converts the forehead temperature to display its “oral equivalent.”

(according to the result of the clinical evaluation to get the offset value)

þ Blue LED Backlight

Blue LED backlight will be automatically turned on after measurement, and automatically

turned off after 2 seconds.

þ Enclosure Rating: IP22

þ Dimensions: 158.0 x 48.0 x 40.2 mm

þ Weight: 100 grams including battery

The device should not submerge into any liquids and expose it to direct moisture.

There is no gender and age limitation for using the infrared thermometer.

This is not an AP or APG product.

Figure 1

THD2FE Non-contact Forehead Thermometer

Functions

Forehead temperature

The thermometer has been designed for home use. It’s not meant to replace a visit to the

doctor. Please also remember to compare the measurement result to your regular body

temperature. Please consult with doctor if you have health concerns.

àPlease see the “Use of the thermometer” section to learn how to measure the body

temperature.

Surface temperature

The surface mode shows the actual and unadjusted surface temperature which is different from

the body temperature. It can help you monitor if the object temperature is suitable for the baby

or patient, for example the baby’s milk.

àPlease see the “Use of the thermometer” section to learn how to measure the object

temperature.

Temperature indicator

If the thermometer detects a temperature ≧99.5°F (or 37.5°C) under forehead mode, three

short beep sound will follow one long beep sound to warn the user for the temperature is above

99.5°F (37.5°C).

Memory locations

There are total 25 sets of measurement condition for body temperature.

àWhen power on, press the “ON/MEM” button to see the temperature records with icon.

°F / °C switch

In “Power Off” mode, press and hold the “START” button, then press the “ON/MEM” button for

3 seconds, icon “°F” will be switched to icon “°C”. You can also use the same process to

change the LCD display from °C to °F.

NOTE: Memory clear and Celsius/Fahrenheit switch are together. When you switch Celsius and

Fahrenheit, the Memory will be cleared.

Mute mode

The device setting with buzzer is on, you can set buzzer on/off under Mute mode.

When power on, press and hold the “ON/MEM” button for 3 seconds. The icon will flash on

the LCD screen and then release the “ON/MEM” button to set MUTE. Thus you will not hear

beep sounds. You can also use the same process to turn off the Mute function.

NOTE: If keep pressing "ON/MEN" button for 2 seconds after icon flashing, the device will

be power off WITHOUT setting Mute.

Use of the thermometer

Note: If there is any temperature difference between the places where the device is stored and where you are going to measure, subject and the device should

stay in the same room for at least 15 minutes before measurement.

1. Always make sure the probe lens is clean without any damage and the forehead is clean.

Warning: Choking from swallowing small parts and batteries by children or pets is possible, please keep small parts and batteries at places where

children and pets can’t reach.

2. Power on:

Press the “ON/MEM” button (see figure 1).

3. Measuring body temperature on the forehead:

Indications for use:

The Non-contact Clinical Thermometer, Model THD2FE is an infrared thermometer intended

for the intermittent measurement of human body temperature in people of all ages.

Intended operator:

At least 11 years old (5 years intensive reading experience), no maximum.

Specifications

þ Temperature measurement range:

Forehead mode: 93.2~108°F (34~42.2°C)

Surface mode: -7.6~176°F (-22~80°C)

þ Operating temperature range: 50~104°F (10~40°C), 15%~85% RH

þ Storage temperature range: It should be stored at room temperature between -4~122°F

(-20~+50°C), RH≦85%

Transportation temperature shall be less than 158°F (70°C), RH≦95%

þ Atmospheric pressure: 800~1013 hPa

þ Comply with ASTM E1965-98, EN ISO 80601-2-56, IEC/EN60601-1-2(EMC),

IEC/EN60601-1(Safety) standards, ISO10993, RoHS.

þ Accuracy:

Forehead mode: ±0.4 oF (0.2 °C ) within 95~107.6°F (35~42°C),

±0.5 oF (0.3 °C ) for other range.

Surface mode: ±0.5°F (0.3°C) within 71.6~108°F (22~42.2°C),

others ±4% or ±4°F (2°C) whichever is greater.

þ Temperature indicator, memory and °F / °C switch function

þ Battery: AAA x 2 pcs

þ Battery life: around 3,000 continuous readings.

þ Expected Service Life: 4 years

þ This thermometer converts the forehead temperature to display its “oral equivalent.”

(according to the result of the clinical evaluation to get the offset value)

þ Blue LED Backlight

Blue LED backlight will be automatically turned on after measurement, and automatically

turned off after 2 seconds.

þ Enclosure Rating: IP22

þ Dimensions: 158.0 x 48.0 x 40.2 mm

þ Weight: 100 grams including battery

The device should not submerge into any liquids and expose it to direct moisture.

There is no gender and age limitation for using the infrared thermometer.

This is not an AP or APG product.

Figure 1

STUMM-MODUS:

Das Gerät ist eingestellt mit eingeschaltetem Ton. Sie können den Ton im Stumm-Modus auf ein / aus

einstellen. Drücken und halten Sie die Taste „ON/MEM“ bei eingeschaltetem Netzstrom für 3 Sekunden

gedrückt. Das Symbol blinkt dann auf dem LCD-Bildschirm und, um auf stumm zu schalten, lassen Sie

die „ON/MEM“-Taste los. Somit werden Sie die Pieptöne nicht hören. Sie können den gleichen Prozess

verwenden, um die Stumm-Funktion abzuschalten.

ANMERKUNG: Wenn Sie die Taste “ON/MEM” 2 Sekunden lang gedrückt halten, nachdem das

THD2FE Non-contact Forehead Thermometer

Functions

Forehead temperature

The thermometer has been designed for home use. It’s not meant to replace a visit to the

doctor. Please also remember to compare the measurement result to your regular body

temperature. Please consult with doctor if you have health concerns.

àPlease see the “Use of the thermometer” section to learn how to measure the body

temperature.

Surface temperature

The surface mode shows the actual and unadjusted surface temperature which is different from

the body temperature. It can help you monitor if the object temperature is suitable for the baby

or patient, for example the baby’s milk.

àPlease see the “Use of the thermometer” section to learn how to measure the object

temperature.

Temperature indicator

If the thermometer detects a temperature ≧99.5°F (or 37.5°C) under forehead mode, three

short beep sound will follow one long beep sound to warn the user for the temperature is above

99.5°F (37.5°C).

Memory locations

There are total 25 sets of measurement condition for body temperature.

àWhen power on, press the “ON/MEM” button to see the temperature records with icon.

°F / °C switch

In “Power Off” mode, press and hold the “START” button, then press the “ON/MEM” button for

3 seconds, icon “°F” will be switched to icon “°C”. You can also use the same process to

change the LCD display from °C to °F.

NOTE: Memory clear and Celsius/Fahrenheit switch are together. When you switch Celsius and

Fahrenheit, the Memory will be cleared.

Mute mode

The device setting with buzzer is on, you can set buzzer on/off under Mute mode.

When power on, press and hold the “ON/MEM” button for 3 seconds. The icon will flash on

the LCD screen and then release the “ON/MEM” button to set MUTE. Thus you will not hear

beep sounds. You can also use the same process to turn off the Mute function.

NOTE: If keep pressing "ON/MEN" button for 2 seconds after icon flashing, the device will

be power off WITHOUT setting Mute.

Use of the thermometer

Note: If there is any temperature difference between the places where the device is stored and where you are going to measure, subject and the device should

stay in the same room for at least 15 minutes before measurement.

1. Always make sure the probe lens is clean without any damage and the forehead is clean.

Warning: Choking from swallowing small parts and batteries by children or pets is possible, please keep small parts and batteries at places where

children and pets can’t reach.

2. Power on:

Press the “ON/MEM” button (see figure 1).

3. Measuring body temperature on the forehead:

Indications for use:

The Non-contact Clinical Thermometer, Model THD2FE is an infrared thermometer intended

for the intermittent measurement of human body temperature in people of all ages.

Intended operator:

At least 11 years old (5 years intensive reading experience), no maximum.

Specifications

þ Temperature measurement range:

Forehead mode: 93.2~108°F (34~42.2°C)

Surface mode: -7.6~176°F (-22~80°C)

þ Operating temperature range: 50~104°F (10~40°C), 15%~85% RH

þ Storage temperature range: It should be stored at room temperature between -4~122°F

(-20~+50°C), RH≦85%

Transportation temperature shall be less than 158°F (70°C), RH≦95%

þ Atmospheric pressure: 800~1013 hPa

þ Comply with ASTM E1965-98, EN ISO 80601-2-56, IEC/EN60601-1-2(EMC),

IEC/EN60601-1(Safety) standards, ISO10993, RoHS.

þ Accuracy:

Forehead mode: ±0.4 oF (0.2 °C ) within 95~107.6°F (35~42°C),

±0.5 oF (0.3 °C ) for other range.

Surface mode: ±0.5°F (0.3°C) within 71.6~108°F (22~42.2°C),

others ±4% or ±4°F (2°C) whichever is greater.

þ Temperature indicator, memory and °F / °C switch function

þ Battery: AAA x 2 pcs

þ Battery life: around 3,000 continuous readings.

þ Expected Service Life: 4 years

þ This thermometer converts the forehead temperature to display its “oral equivalent.”

(according to the result of the clinical evaluation to get the offset value)

þ Blue LED Backlight

Blue LED backlight will be automatically turned on after measurement, and automatically

turned off after 2 seconds.

þ Enclosure Rating: IP22

þ Dimensions: 158.0 x 48.0 x 40.2 mm

þ Weight: 100 grams including battery

The device should not submerge into any liquids and expose it to direct moisture.

There is no gender and age limitation for using the infrared thermometer.

This is not an AP or APG product.

Figure 1

Symbol blinkt, schaltet sich das Gerät ab, OHNE auf stumm zu schalten.

THD2FE Non-contact Forehead Thermometer

Functions

Forehead temperature

The thermometer has been designed for home use. It’s not meant to replace a visit to the

doctor. Please also remember to compare the measurement result to your regular body

temperature. Please consult with doctor if you have health concerns.

àPlease see the “Use of the thermometer” section to learn how to measure the body

temperature.

Surface temperature

The surface mode shows the actual and unadjusted surface temperature which is different from

the body temperature. It can help you monitor if the object temperature is suitable for the baby

or patient, for example the baby’s milk.

àPlease see the “Use of the thermometer” section to learn how to measure the object

temperature.

Temperature indicator

If the thermometer detects a temperature ≧99.5°F (or 37.5°C) under forehead mode, three

short beep sound will follow one long beep sound to warn the user for the temperature is above

99.5°F (37.5°C).

Memory locations

There are total 25 sets of measurement condition for body temperature.

àWhen power on, press the “ON/MEM” button to see the temperature records with icon.

°F / °C switch

In “Power Off” mode, press and hold the “START” button, then press the “ON/MEM” button for

3 seconds, icon “°F” will be switched to icon “°C”. You can also use the same process to

change the LCD display from °C to °F.

NOTE: Memory clear and Celsius/Fahrenheit switch are together. When you switch Celsius and

Fahrenheit, the Memory will be cleared.

Mute mode

The device setting with buzzer is on, you can set buzzer on/off under Mute mode.

When power on, press and hold the “ON/MEM” button for 3 seconds. The icon will flash on

the LCD screen and then release the “ON/MEM” button to set MUTE. Thus you will not hear

beep sounds. You can also use the same process to turn off the Mute function.

NOTE: If keep pressing "ON/MEN" button for 2 seconds after icon flashing, the device will

be power off WITHOUT setting Mute.

Use of the thermometer

Note: If there is any temperature difference between the places where the device is stored and where you are going to measure, subject and the device should

stay in the same room for at least 15 minutes before measurement.

1. Always make sure the probe lens is clean without any damage and the forehead is clean.

Warning: Choking from swallowing small parts and batteries by children or pets is possible, please keep small parts and batteries at places where

children and pets can’t reach.

2. Power on:

Press the “ON/MEM” button (see figure 1).

3. Measuring body temperature on the forehead:

Indications for use:

The Non-contact Clinical Thermometer, Model THD2FE is an infrared thermometer intended

for the intermittent measurement of human body temperature in people of all ages.

Intended operator:

At least 11 years old (5 years intensive reading experience), no maximum.

Specifications

þ Temperature measurement range:

Forehead mode: 93.2~108°F (34~42.2°C)

Surface mode: -7.6~176°F (-22~80°C)

þ Operating temperature range: 50~104°F (10~40°C), 15%~85% RH

þ Storage temperature range: It should be stored at room temperature between -4~122°F

(-20~+50°C), RH≦85%

Transportation temperature shall be less than 158°F (70°C), RH≦95%

þ Atmospheric pressure: 800~1013 hPa

þ Comply with ASTM E1965-98, EN ISO 80601-2-56, IEC/EN60601-1-2(EMC),

IEC/EN60601-1(Safety) standards, ISO10993, RoHS.

þ Accuracy:

Forehead mode: ±0.4 oF (0.2 °C ) within 95~107.6°F (35~42°C),

±0.5 oF (0.3 °C ) for other range.

Surface mode: ±0.5°F (0.3°C) within 71.6~108°F (22~42.2°C),

others ±4% or ±4°F (2°C) whichever is greater.

þ Temperature indicator, memory and °F / °C switch function

þ Battery: AAA x 2 pcs

þ Battery life: around 3,000 continuous readings.

þ Expected Service Life: 4 years

þ This thermometer converts the forehead temperature to display its “oral equivalent.”

(according to the result of the clinical evaluation to get the offset value)

þ Blue LED Backlight

Blue LED backlight will be automatically turned on after measurement, and automatically

turned off after 2 seconds.

þ Enclosure Rating: IP22

þ Dimensions: 158.0 x 48.0 x 40.2 mm

þ Weight: 100 grams including battery

The device should not submerge into any liquids and expose it to direct moisture.

There is no gender and age limitation for using the infrared thermometer.

This is not an AP or APG product.

Figure 1

VERWENDUNG DES THERMOMETERS

ANMERKUNG: Falls es einen Temperaturunterschied zwischen den Stellen gibt, an denen das Gerät aufbewahrt wird

und den Stellen, an denen Sie messen werden, dann sollten die Person und das Gerät vor der Messung mindestens 15

Minuten im selben Raum bleiben.

1. Stellen Sie immer sicher, dass das Sondenglas sauber und unbeschädigt ist und, dass die Stirn sauber ist.

Ersticken durch Verschlucken von Kleinteilen und Batterien durch Kinder ist möglich. Bewahren Sie Kleinteile und

Batterien an Orten auf, an die Kinder und Haustiere nicht gelangen können.

2. Einschalten: Drücken Sie die Taste “ON/MEM” (siehe Abb. 1).

THD2FE Non-contact Forehead Thermometer

Functions

Forehead temperature

The thermometer has been designed for home use. It’s not meant to replace a visit to the

doctor. Please also remember to compare the measurement result to your regular body

temperature. Please consult with doctor if you have health concerns.

àPlease see the “Use of the thermometer” section to learn how to measure the body

temperature.

Surface temperature

The surface mode shows the actual and unadjusted surface temperature which is different from

the body temperature. It can help you monitor if the object temperature is suitable for the baby

or patient, for example the baby’s milk.

àPlease see the “Use of the thermometer” section to learn how to measure the object

temperature.

Temperature indicator

If the thermometer detects a temperature ≧99.5°F (or 37.5°C) under forehead mode, three

short beep sound will follow one long beep sound to warn the user for the temperature is above

99.5°F (37.5°C).

Memory locations

There are total 25 sets of measurement condition for body temperature.

àWhen power on, press the “ON/MEM” button to see the temperature records with icon.

°F / °C switch

In “Power Off” mode, press and hold the “START” button, then press the “ON/MEM” button for

3 seconds, icon “°F” will be switched to icon “°C”. You can also use the same process to

change the LCD display from °C to °F.

NOTE: Memory clear and Celsius/Fahrenheit switch are together. When you switch Celsius and

Fahrenheit, the Memory will be cleared.

Mute mode

The device setting with buzzer is on, you can set buzzer on/off under Mute mode.

When power on, press and hold the “ON/MEM” button for 3 seconds. The icon will flash on

the LCD screen and then release the “ON/MEM” button to set MUTE. Thus you will not hear

beep sounds. You can also use the same process to turn off the Mute function.

NOTE: If keep pressing "ON/MEN" button for 2 seconds after icon flashing, the device will

be power off WITHOUT setting Mute.

Use of the thermometer

Note: If there is any temperature difference between the places where the device is stored and where you are going to measure, subject and the device should

stay in the same room for at least 15 minutes before measurement.

1. Always make sure the probe lens is clean without any damage and the forehead is clean.

Warning: Choking from swallowing small parts and batteries by children or pets is possible, please keep small parts and batteries at places where

children and pets can’t reach.

2. Power on:

Press the “ON/MEM” button (see figure 1).

3. Measuring body temperature on the forehead:

Indications for use:

The Non-contact Clinical Thermometer, Model THD2FE is an infrared thermometer intended

for the intermittent measurement of human body temperature in people of all ages.

Intended operator:

At least 11 years old (5 years intensive reading experience), no maximum.

Specifications

þ Temperature measurement range:

Forehead mode: 93.2~108°F (34~42.2°C)

Surface mode: -7.6~176°F (-22~80°C)

þ Operating temperature range: 50~104°F (10~40°C), 15%~85% RH

þ Storage temperature range: It should be stored at room temperature between -4~122°F

(-20~+50°C), RH≦85%

Transportation temperature shall be less than 158°F (70°C), RH≦95%

þ Atmospheric pressure: 800~1013 hPa

þ Comply with ASTM E1965-98, EN ISO 80601-2-56, IEC/EN60601-1-2(EMC),

IEC/EN60601-1(Safety) standards, ISO10993, RoHS.

þ Accuracy:

Forehead mode: ±0.4 oF (0.2 °C ) within 95~107.6°F (35~42°C),

±0.5 oF (0.3 °C ) for other range.

Surface mode: ±0.5°F (0.3°C) within 71.6~108°F (22~42.2°C),

others ±4% or ±4°F (2°C) whichever is greater.

þ Temperature indicator, memory and °F / °C switch function

þ Battery: AAA x 2 pcs

þ Battery life: around 3,000 continuous readings.

þ Expected Service Life: 4 years

þ This thermometer converts the forehead temperature to display its “oral equivalent.”

(according to the result of the clinical evaluation to get the offset value)

þ Blue LED Backlight

Blue LED backlight will be automatically turned on after measurement, and automatically

turned off after 2 seconds.

þ Enclosure Rating: IP22

þ Dimensions: 158.0 x 48.0 x 40.2 mm

þ Weight: 100 grams including battery

The device should not submerge into any liquids and expose it to direct moisture.

There is no gender and age limitation for using the infrared thermometer.

This is not an AP or APG product.

Figure 1

3. Messung der Körpertemperatur an der Stirn:

Drücken Sie die Taste „ON/MEM“, um das Gerät einzuschalten. Stirn-Modus ist der Standard-Modus. Sie können das

Ref No.：032020

Press the “ON/MEM” button to power on the device. Forehead mode is the default mode. You can see the icon on the screen

and hear two beep sounds (see figure 1). In this mode, you can hold the thermometer within 4 cm from the central forehead (Fig. 2) and press

the "START" button to get the forehead measurement. The time consuming for measurement might be 1 second. After each forehead

measurement, wait icon stop flashing to be ready for next measurement.

Figure 2

Points for attention:

a. Forehead temperature is displayed in oral mode. This mode converts the forehead temperature to display its “oral-equivalent” value.

b. Before the measurement, the subject should stay in a stable environment for 5 minutes and avoid exercise, bath for 30mins.

c. Remember to keep the forehead area clean and away from sweat, cosmetics and scar while taking temperature.

d. The “Clinical Bias” is -2.5 ~ -3.1°F (-1.4 ~ -1.7

C).

e. The “Limits of Agreement” is 0.98.

f. The "Repeatability" is 0.36°F(0.20

4. Measuring surface temperature:

4.1 After power on, press and hold the “ON/MEM” button, and press the “START” button one time for “Infrared thermometer” mode to see icon on your LCD

display. In this mode, you can get the target surface temperature.

4.2 When you press the “START” button, you will get the real time temperature immediately. If you press and hold the “START” button, the reading of measurement will

be continuously updated.

4.3 Applications include temperature measurements for water, milk, cloth, skin or other objects.

* Note: This mode shows the actual and unadjusted surface temperature which is different from the body temperature.

5. Power off:

5.1 Device will automatically shut off if left idle for more than 1 minute to extend battery life.

5.2 Manually power off the device by pressing the “ON/MEM” button.

Important Notes

Cleaning

And Storage

Please make sure the probe is clean to ensure an accurate reading.

The probe lens is the most delicate part of the thermometer. Use with care when cleaning the probe lens to avoid damage.

a. Use alcohol swabs or cotton swabs moistened with 70%~75% alcohol to clean the probe lens.

b. Allow the probe to fully dry for at least 1 minute.

c. Keep the unit dry and away from any liquids and direct sunlight.

d. Storage temperature range: It should be stored at room temperature between -4~122°F (-20~+50°C),RH

≦

85%

e. The Probe should not be submerged into liquids.

Holding the thermometer too long may cause a higher ambient temperature reading of the probe.

This could make the body temperature measurement lower than usual.

Battery replacement

When the “Low Battery” icon indicates the battery is low, the battery should be replaced immediately with AAA *2 pcs batteries.

1. Open the battery cover: Use the thumbs to push battery cover out. (See Figure 1)

2. Insert the new AAA *2 pcs batteries. (See Figure 2)

3. Replace the battery cover. (See Figure 3)

Trouble shooting:

Error Message

Problem

Solution

Error 5~9, the system is not functioning properly.

Unload the battery, wait for 1 minute and repower it. If the message

reappears, contact the retailer for service.

Measurement before device stabilization.

Wait for “Er1” to disappear.

The ambient temperature is not within the range between 50oF~104oF (10oC~40oC).

Allow the thermometer to rest in a room for at least 15 minutes at room

temperature: 50oF~104oF (10oC~40oC).

(1) In forehead mode: Temperature taken is higher than 108°F (+42.2oC)

(2) In surface mode: Temperature taken is higher than 176°F (+80oC)

Please select the target within specifications. If a malfunction still exists,

please contact the nearest retailer.

(1) In forehead mode: Temperature taken is lower than 93.2°F (+34oC)

(2) In surface mode: Temperature taken is lower than –7.6°F (-22oC)

Device cannot be powered on to the ready stage.

Change with a new battery.

Warranty:

Warranty: 12 months

Manufacture Date: as the serial number (please open the battery cover, it is shown on the inside of the device.)

Ex.SN:E512A000001, the first “E” is External, the second number “5” is the last number of manufacture year, the third and the fourth number “12” is the manufacture

month, the others is the serial number.

Note: The thermometer is calibrated at the time of manufacture. If you question calibration mode, the accuracy of temperature measurements or unexpected

events at any time, please contact the dealers or nearest service address.

Warning: No modification of this equipment is allowed.

Please read the instructions for use BF type applied part

Radiant Innovation Inc.

Http://www.radiantek.com.tw

Add: 1F, No.3, Industrial East 9th Road,

Science-Based Industrial Park, HsinChu, Taiwan 300.

Figure 1Figure 2Figure 3

Symbol auf dem Bildschirm sehen und Sie hören zwei Pieptöne (siehe Abb. 1). In diesem Modus können Sie das

Thermometer innerhalb 1,5” (4 cm) Abstand an den mittleren Stirnbereich halten und die Taste „START“ drücken,

um die Stirnmessung zu erhalten. Die Zeitspanne für die Messung kann 1 Sekunde betragen. Warten Sie nach jeder

Stirnmessung darauf, dass das

Ref No.：032020

Press the “ON/MEM” button to power on the device. Forehead mode is the default mode. You can see the icon on the screen

and hear two beep sounds (see figure 1). In this mode, you can hold the thermometer within 4 cm from the central forehead (Fig. 2) and press

the "START" button to get the forehead measurement. The time consuming for measurement might be 1 second. After each forehead

measurement, wait icon stop flashing to be ready for next measurement.

Figure 2

Points for attention:

a. Forehead temperature is displayed in oral mode. This mode converts the forehead temperature to display its “oral-equivalent” value.

b. Before the measurement, the subject should stay in a stable environment for 5 minutes and avoid exercise, bath for 30mins.

c. Remember to keep the forehead area clean and away from sweat, cosmetics and scar while taking temperature.

d. The “Clinical Bias” is -2.5 ~ -3.1°F (-1.4 ~ -1.7

C).

e. The “Limits of Agreement” is 0.98.

f. The "Repeatability" is 0.36°F(0.20

4. Measuring surface temperature:

4.1 After power on, press and hold the “ON/MEM” button, and press the “START” button one time for “Infrared thermometer” mode to see icon on your LCD

display. In this mode, you can get the target surface temperature.

4.2 When you press the “START” button, you will get the real time temperature immediately. If you press and hold the “START” button, the reading of measurement will

be continuously updated.

4.3 Applications include temperature measurements for water, milk, cloth, skin or other objects.

* Note: This mode shows the actual and unadjusted surface temperature which is different from the body temperature.

5. Power off:

5.1 Device will automatically shut off if left idle for more than 1 minute to extend battery life.

5.2 Manually power off the device by pressing the “ON/MEM” button.

Important Notes

Cleaning

And Storage

Please make sure the probe is clean to ensure an accurate reading.

The probe lens is the most delicate part of the thermometer. Use with care when cleaning the probe lens to avoid damage.

a. Use alcohol swabs or cotton swabs moistened with 70%~75% alcohol to clean the probe lens.

b. Allow the probe to fully dry for at least 1 minute.

c. Keep the unit dry and away from any liquids and direct sunlight.

d. Storage temperature range: It should be stored at room temperature between -4~122°F (-20~+50°C),RH

≦

85%

e. The Probe should not be submerged into liquids.

Holding the thermometer too long may cause a higher ambient temperature reading of the probe.

This could make the body temperature measurement lower than usual.

Battery replacement

When the “Low Battery” icon indicates the battery is low, the battery should be replaced immediately with AAA *2 pcs batteries.

1. Open the battery cover: Use the thumbs to push battery cover out. (See Figure 1)

2. Insert the new AAA *2 pcs batteries. (See Figure 2)

3. Replace the battery cover. (See Figure 3)

Trouble shooting:

Error Message

Problem

Solution

Error 5~9, the system is not functioning properly.

Unload the battery, wait for 1 minute and repower it. If the message

reappears, contact the retailer for service.

Measurement before device stabilization.

Wait for “Er1” to disappear.

The ambient temperature is not within the range between 50oF~104oF (10oC~40oC).

Allow the thermometer to rest in a room for at least 15 minutes at room

temperature: 50oF~104oF (10oC~40oC).

(1) In forehead mode: Temperature taken is higher than 108°F (+42.2oC)

(2) In surface mode: Temperature taken is higher than 176°F (+80oC)

Please select the target within specifications. If a malfunction still exists,

please contact the nearest retailer.

(1) In forehead mode: Temperature taken is lower than 93.2°F (+34oC)

(2) In surface mode: Temperature taken is lower than –7.6°F (-22oC)

Device cannot be powered on to the ready stage.

Change with a new battery.

Warranty:

Warranty: 12 months

Manufacture Date: as the serial number (please open the battery cover, it is shown on the inside of the device.)

Ex.SN:E512A000001, the first “E” is External, the second number “5” is the last number of manufacture year, the third and the fourth number “12” is the manufacture

month, the others is the serial number.

Note: The thermometer is calibrated at the time of manufacture. If you question calibration mode, the accuracy of temperature measurements or unexpected

events at any time, please contact the dealers or nearest service address.

Warning: No modification of this equipment is allowed.

Please read the instructions for use BF type applied part

Radiant Innovation Inc.

Http://www.radiantek.com.tw

Add: 1F, No.3, Industrial East 9th Road,

Science-Based Industrial Park, HsinChu, Taiwan 300.

Figure 1Figure 2Figure 3

Symbol aufhört zu blinken, um für die nächste Messung bereit zu sein.

ANMERKUNG:

• Die Stirntemperatur wird im oralen Modus angezeigt. In diesem Modus wird die Stirntemperatur umgerechnet, um

deren „oralen Äquivalenzwert“ anzuzeigen.

• Vor der Messung sollte die Person 5 Minuten lang in einer stabilen Umgebung bleiben und Betätigungen/Bäder 30

Minuten lang vermeiden.

• Denken Sie daran, den Stirnbereich sauber und frei von Schweiß, Kosmetik. und Narben bei der Temperaturmessung

zu halten.

• Der “systematische Fehler” beträgt -1,4 ~ -1,7°C (-2,5 ~ -3,1°F)

• Die „Übereinstimmungsgrenze“ beträgt 0,98.

• Die „Wiederholungsgenauigkeit“ beträgt 0,20°C (0,36°F)

MESSUNG DER OBERFLÄCHENTEMPERATUR

1. Drücken Sie nach dem Einschalten auf die Taste “ON/MEM” und halten sie diese gedrückt und drücken Sie einmal auf

die Taste “START” für den „Infrarot-Thermometer“-Modus; Sie sehen dann das

Ref No.：032020

Press the “ON/MEM” button to power on the device. Forehead mode is the default mode. You can see the icon on the screen

and hear two beep sounds (see figure 1). In this mode, you can hold the thermometer within 4 cm from the central forehead (Fig. 2) and press

the "START" button to get the forehead measurement. The time consuming for measurement might be 1 second. After each forehead

measurement, wait icon stop flashing to be ready for next measurement.

Figure 2

Points for attention:

a. Forehead temperature is displayed in oral mode. This mode converts the forehead temperature to display its “oral-equivalent” value.

b. Before the measurement, the subject should stay in a stable environment for 5 minutes and avoid exercise, bath for 30mins.

c. Remember to keep the forehead area clean and away from sweat, cosmetics and scar while taking temperature.

d. The “Clinical Bias” is -2.5 ~ -3.1°F (-1.4 ~ -1.7

C).

e. The “Limits of Agreement” is 0.98.

f. The "Repeatability" is 0.36°F(0.20

4. Measuring surface temperature:

4.1 After power on, press and hold the “ON/MEM” button, and press the “START” button one time for “Infrared thermometer” mode to see icon on your LCD

display. In this mode, you can get the target surface temperature.

4.2 When you press the “START” button, you will get the real time temperature immediately. If you press and hold the “START” button, the reading of measurement will

be continuously updated.

4.3 Applications include temperature measurements for water, milk, cloth, skin or other objects.

* Note: This mode shows the actual and unadjusted surface temperature which is different from the body temperature.

5. Power off:

5.1 Device will automatically shut off if left idle for more than 1 minute to extend battery life.

5.2 Manually power off the device by pressing the “ON/MEM” button.

Important Notes

Cleaning

And Storage

Please make sure the probe is clean to ensure an accurate reading.

The probe lens is the most delicate part of the thermometer. Use with care when cleaning the probe lens to avoid damage.

a. Use alcohol swabs or cotton swabs moistened with 70%~75% alcohol to clean the probe lens.

b. Allow the probe to fully dry for at least 1 minute.

c. Keep the unit dry and away from any liquids and direct sunlight.

d. Storage temperature range: It should be stored at room temperature between -4~122°F (-20~+50°C),RH

≦

85%

e. The Probe should not be submerged into liquids.

Holding the thermometer too long may cause a higher ambient temperature reading of the probe.

This could make the body temperature measurement lower than usual.

Battery replacement

When the “Low Battery” icon indicates the battery is low, the battery should be replaced immediately with AAA *2 pcs batteries.

1. Open the battery cover: Use the thumbs to push battery cover out. (See Figure 1)

2. Insert the new AAA *2 pcs batteries. (See Figure 2)

3. Replace the battery cover. (See Figure 3)

Trouble shooting:

Error Message

Problem

Solution

Error 5~9, the system is not functioning properly.

Unload the battery, wait for 1 minute and repower it. If the message

reappears, contact the retailer for service.

Measurement before device stabilization.

Wait for “Er1” to disappear.

The ambient temperature is not within the range between 50oF~104oF (10oC~40oC).

Allow the thermometer to rest in a room for at least 15 minutes at room

temperature: 50oF~104oF (10oC~40oC).

(1) In forehead mode: Temperature taken is higher than 108°F (+42.2oC)

(2) In surface mode: Temperature taken is higher than 176°F (+80oC)

Please select the target within specifications. If a malfunction still exists,

please contact the nearest retailer.

(1) In forehead mode: Temperature taken is lower than 93.2°F (+34oC)

(2) In surface mode: Temperature taken is lower than –7.6°F (-22oC)

Device cannot be powered on to the ready stage.

Change with a new battery.

Warranty:

Warranty: 12 months

Manufacture Date: as the serial number (please open the battery cover, it is shown on the inside of the device.)

Ex.SN:E512A000001, the first “E” is External, the second number “5” is the last number of manufacture year, the third and the fourth number “12” is the manufacture

month, the others is the serial number.

Note: The thermometer is calibrated at the time of manufacture. If you question calibration mode, the accuracy of temperature measurements or unexpected

events at any time, please contact the dealers or nearest service address.

Warning: No modification of this equipment is allowed.

Please read the instructions for use BF type applied part

Radiant Innovation Inc.

Http://www.radiantek.com.tw

Add: 1F, No.3, Industrial East 9th Road,

Science-Based Industrial Park, HsinChu, Taiwan 300.

Figure 1Figure 2Figure 3

Symbol auf Ihrer LCD-Anzeige. In

diesem Modus können Sie die Ziel-Oberﬂächentemperatur erhalten.

2. Wenn Sie die Taste „START“ drücken, erhalten Sie sofort die Echtzeit-Temperatur. Wenn Sie die Taste „START“ drücken

und gedrückt halten, wird der Messwert kontinuierlich aktualisiert.

ANMERKUNG: Der Oberﬂächen-Modus zeigt die tatsächliche, unbereinigte Oberﬂächentemperatur, die sich von der

Körpertemperatur unterscheidet.

AUSSCHALTEN

1. Um die Batterielebensdauer zu verlängern, schaltet sich das Gerät nach mehr als 1 Minute Inaktivität automatisch ab.

2. Schalten Sie das Gerät, durch Drücken der Taste „ON/MEM“, manuell ab.

9www.mastercool.com

WICHTIGE ANMERKUNGEN

REINIGUNG UND LAGERUNG:

Bitte stellen Sie sicher, dass die Sonde sauber ist, um einen akkuraten Messwert zu gewährleisten.

Das Sondenglas ist das empﬁndlichste Teil des Thermometers. Gehen Sie mit Vorsicht vor bei der Reinigung des

Sondenglases, um Schäden zu vermeiden.

• Verwenden Sie Alkohol- oder Wattetupfer, die mit 70%~75% Alkohol angefeuchtet sind, um das Sondenglas zu

reinigen.

• Lassen Sie das Sondenglas mindestens 1 Minute lang vollständig abtrocknen.

• Halten Sie das Gerät trocken und entfernt von Flüssigkeiten und direkter Sonneneinstrahlung.

• Lagertemperaturbereich: aufbewahrt bei Raumtemperatur, zwischen -20~+50°C (-4~122°F), Rel. Feuchte <85%

• Die Sonde sollte nicht in Flüssigkeiten eingetaucht werden.

Das Thermometer zu lang in der Hand zu halten kann zu einem höheren Umgebungstemperatur-Messwert der Sonde

führen. Dies könnte die Körpertemperatur-Messung niedriger als üblich machen.

BATTERIEWECHSEL:

Ref No.：032020

Press the “ON/MEM” button to power on the device. Forehead mode is the default mode. You can see the icon on the screen

and hear two beep sounds (see figure 1). In this mode, you can hold the thermometer within 4 cm from the central forehead (Fig. 2) and press

the "START" button to get the forehead measurement. The time consuming for measurement might be 1 second. After each forehead

measurement, wait icon stop flashing to be ready for next measurement.

Figure 2

Points for attention:

a. Forehead temperature is displayed in oral mode. This mode converts the forehead temperature to display its “oral-equivalent” value.

b. Before the measurement, the subject should stay in a stable environment for 5 minutes and avoid exercise, bath for 30mins.

c. Remember to keep the forehead area clean and away from sweat, cosmetics and scar while taking temperature.

d. The “Clinical Bias” is -2.5 ~ -3.1°F (-1.4 ~ -1.7

C).

e. The “Limits of Agreement” is 0.98.

f. The "Repeatability" is 0.36°F(0.20

4. Measuring surface temperature:

4.1 After power on, press and hold the “ON/MEM” button, and press the “START” button one time for “Infrared thermometer” mode to see icon on your LCD

display. In this mode, you can get the target surface temperature.

4.2 When you press the “START” button, you will get the real time temperature immediately. If you press and hold the “START” button, the reading of measurement will

be continuously updated.

4.3 Applications include temperature measurements for water, milk, cloth, skin or other objects.

* Note: This mode shows the actual and unadjusted surface temperature which is different from the body temperature.

5. Power off:

5.1 Device will automatically shut off if left idle for more than 1 minute to extend battery life.

5.2 Manually power off the device by pressing the “ON/MEM” button.

Important Notes

Cleaning

And Storage

Please make sure the probe is clean to ensure an accurate reading.

The probe lens is the most delicate part of the thermometer. Use with care when cleaning the probe lens to avoid damage.

a. Use alcohol swabs or cotton swabs moistened with 70%~75% alcohol to clean the probe lens.

b. Allow the probe to fully dry for at least 1 minute.

c. Keep the unit dry and away from any liquids and direct sunlight.

d. Storage temperature range: It should be stored at room temperature between -4~122°F (-20~+50°C),RH

≦

85%

e. The Probe should not be submerged into liquids.

Holding the thermometer too long may cause a higher ambient temperature reading of the probe.

This could make the body temperature measurement lower than usual.

Battery replacement

When the “Low Battery” icon indicates the battery is low, the battery should be replaced immediately with AAA *2 pcs batteries.

1. Open the battery cover: Use the thumbs to push battery cover out. (See Figure 1)

2. Insert the new AAA *2 pcs batteries. (See Figure 2)

3. Replace the battery cover. (See Figure 3)

Trouble shooting:

Error Message

Problem

Solution

Error 5~9, the system is not functioning properly.

Unload the battery, wait for 1 minute and repower it. If the message

reappears, contact the retailer for service.

Measurement before device stabilization.

Wait for “Er1” to disappear.

The ambient temperature is not within the range between 50oF~104oF (10oC~40oC).

Allow the thermometer to rest in a room for at least 15 minutes at room

temperature: 50oF~104oF (10oC~40oC).

(1) In forehead mode: Temperature taken is higher than 108°F (+42.2oC)

(2) In surface mode: Temperature taken is higher than 176°F (+80oC)

Please select the target within specifications. If a malfunction still exists,

please contact the nearest retailer.

(1) In forehead mode: Temperature taken is lower than 93.2°F (+34oC)

(2) In surface mode: Temperature taken is lower than –7.6°F (-22oC)

Device cannot be powered on to the ready stage.

Change with a new battery.

Warranty:

Warranty: 12 months

Manufacture Date: as the serial number (please open the battery cover, it is shown on the inside of the device.)

Ex.SN:E512A000001, the first “E” is External, the second number “5” is the last number of manufacture year, the third and the fourth number “12” is the manufacture

month, the others is the serial number.

Note: The thermometer is calibrated at the time of manufacture. If you question calibration mode, the accuracy of temperature measurements or unexpected

events at any time, please contact the dealers or nearest service address.

Warning: No modification of this equipment is allowed.

Please read the instructions for use BF type applied part

Radiant Innovation Inc.

Http://www.radiantek.com.tw

Add: 1F, No.3, Industrial East 9th Road,

Science-Based Industrial Park, HsinChu, Taiwan 300.

Figure 1Figure 2Figure 3

Wenn das Symbol „Batterie niedrig“ anzeigt, dass der Batteriezustand niedrig ist, sollte die Batterie sofort mit 2 St. AAA,

1,5V-Batterien ausgetauscht werden.

1. Öffnen Sie die Batterieabdeckung und schieben Sie diese mit dem Daumen heraus. (Siehe Abb. 1)

2. Setzen Sie die neuen AAA-Batterien (*2 Stück) ein, (siehe Abb. 2)

3. Fügen Sie die Batterieabdeckung wieder ein (siehe Abb. 3)

Ref No.：032020

Press the “ON/MEM” button to power on the device. Forehead mode is the default mode. You can see the icon on the screen

and hear two beep sounds (see figure 1). In this mode, you can hold the thermometer within 4 cm from the central forehead (Fig. 2) and press

the "START" button to get the forehead measurement. The time consuming for measurement might be 1 second. After each forehead

measurement, wait icon stop flashing to be ready for next measurement.

Figure 2

Points for attention:

a. Forehead temperature is displayed in oral mode. This mode converts the forehead temperature to display its “oral-equivalent” value.

b. Before the measurement, the subject should stay in a stable environment for 5 minutes and avoid exercise, bath for 30mins.

c. Remember to keep the forehead area clean and away from sweat, cosmetics and scar while taking temperature.

d. The “Clinical Bias” is -2.5 ~ -3.1°F (-1.4 ~ -1.7

C).

e. The “Limits of Agreement” is 0.98.

f. The "Repeatability" is 0.36°F(0.20

4. Measuring surface temperature:

4.1 After power on, press and hold the “ON/MEM” button, and press the “START” button one time for “Infrared thermometer” mode to see icon on your LCD

display. In this mode, you can get the target surface temperature.

4.2 When you press the “START” button, you will get the real time temperature immediately. If you press and hold the “START” button, the reading of measurement will

be continuously updated.

4.3 Applications include temperature measurements for water, milk, cloth, skin or other objects.

* Note: This mode shows the actual and unadjusted surface temperature which is different from the body temperature.

5. Power off:

5.1 Device will automatically shut off if left idle for more than 1 minute to extend battery life.

5.2 Manually power off the device by pressing the “ON/MEM” button.

Important Notes

Cleaning

And Storage

Please make sure the probe is clean to ensure an accurate reading.

The probe lens is the most delicate part of the thermometer. Use with care when cleaning the probe lens to avoid damage.

a. Use alcohol swabs or cotton swabs moistened with 70%~75% alcohol to clean the probe lens.

b. Allow the probe to fully dry for at least 1 minute.

c. Keep the unit dry and away from any liquids and direct sunlight.

d. Storage temperature range: It should be stored at room temperature between -4~122°F (-20~+50°C),RH

≦

85%

e. The Probe should not be submerged into liquids.

Holding the thermometer too long may cause a higher ambient temperature reading of the probe.

This could make the body temperature measurement lower than usual.

Battery replacement

When the “Low Battery” icon indicates the battery is low, the battery should be replaced immediately with AAA *2 pcs batteries.

1. Open the battery cover: Use the thumbs to push battery cover out. (See Figure 1)

2. Insert the new AAA *2 pcs batteries. (See Figure 2)

3. Replace the battery cover. (See Figure 3)

Trouble shooting:

Error Message

Problem

Solution

Error 5~9, the system is not functioning properly.

Unload the battery, wait for 1 minute and repower it. If the message

reappears, contact the retailer for service.

Measurement before device stabilization.

Wait for “Er1” to disappear.

The ambient temperature is not within the range between 50oF~104oF (10oC~40oC).

Allow the thermometer to rest in a room for at least 15 minutes at room

temperature: 50oF~104oF (10oC~40oC).

(1) In forehead mode: Temperature taken is higher than 108°F (+42.2oC)

(2) In surface mode: Temperature taken is higher than 176°F (+80oC)

Please select the target within specifications. If a malfunction still exists,

please contact the nearest retailer.

(1) In forehead mode: Temperature taken is lower than 93.2°F (+34oC)

(2) In surface mode: Temperature taken is lower than –7.6°F (-22oC)

Device cannot be powered on to the ready stage.

Change with a new battery.

Warranty:

Warranty: 12 months

Manufacture Date: as the serial number (please open the battery cover, it is shown on the inside of the device.)

Ex.SN:E512A000001, the first “E” is External, the second number “5” is the last number of manufacture year, the third and the fourth number “12” is the manufacture

month, the others is the serial number.

Note: The thermometer is calibrated at the time of manufacture. If you question calibration mode, the accuracy of temperature measurements or unexpected

events at any time, please contact the dealers or nearest service address.

Warning: No modification of this equipment is allowed.

Please read the instructions for use BF type applied part

Radiant Innovation Inc.

Http://www.radiantek.com.tw

Add: 1F, No.3, Industrial East 9th Road,

Science-Based Industrial Park, HsinChu, Taiwan 300.

Figure 1Figure 2Figure 3

FEHLERDIAGNOSE:

Fehlermeldung Problem Lösung

Ref No.：032020

Press the “ON/MEM” button to power on the device. Forehead mode is the default mode. You can see the icon on the screen

and hear two beep sounds (see figure 1). In this mode, you can hold the thermometer within 4 cm from the central forehead (Fig. 2) and press

the "START" button to get the forehead measurement. The time consuming for measurement might be 1 second. After each forehead

measurement, wait icon stop flashing to be ready for next measurement.

Figure 2

Points for attention:

a. Forehead temperature is displayed in oral mode. This mode converts the forehead temperature to display its “oral-equivalent” value.

b. Before the measurement, the subject should stay in a stable environment for 5 minutes and avoid exercise, bath for 30mins.

c. Remember to keep the forehead area clean and away from sweat, cosmetics and scar while taking temperature.

d. The “Clinical Bias” is -2.5 ~ -3.1°F (-1.4 ~ -1.7

C).

e. The “Limits of Agreement” is 0.98.

f. The "Repeatability" is 0.36°F(0.20

4. Measuring surface temperature:

4.1 After power on, press and hold the “ON/MEM” button, and press the “START” button one time for “Infrared thermometer” mode to see icon on your LCD

display. In this mode, you can get the target surface temperature.

4.2 When you press the “START” button, you will get the real time temperature immediately. If you press and hold the “START” button, the reading of measurement will

be continuously updated.

4.3 Applications include temperature measurements for water, milk, cloth, skin or other objects.

* Note: This mode shows the actual and unadjusted surface temperature which is different from the body temperature.

5. Power off:

5.1 Device will automatically shut off if left idle for more than 1 minute to extend battery life.

5.2 Manually power off the device by pressing the “ON/MEM” button.

Important Notes

Cleaning

And Storage

Please make sure the probe is clean to ensure an accurate reading.

The probe lens is the most delicate part of the thermometer. Use with care when cleaning the probe lens to avoid damage.

a. Use alcohol swabs or cotton swabs moistened with 70%~75% alcohol to clean the probe lens.

b. Allow the probe to fully dry for at least 1 minute.

c. Keep the unit dry and away from any liquids and direct sunlight.

d. Storage temperature range: It should be stored at room temperature between -4~122°F (-20~+50°C),RH

≦

85%

e. The Probe should not be submerged into liquids.

Holding the thermometer too long may cause a higher ambient temperature reading of the probe.

This could make the body temperature measurement lower than usual.

Battery replacement

When the “Low Battery” icon indicates the battery is low, the battery should be replaced immediately with AAA *2 pcs batteries.

1. Open the battery cover: Use the thumbs to push battery cover out. (See Figure 1)

2. Insert the new AAA *2 pcs batteries. (See Figure 2)

3. Replace the battery cover. (See Figure 3)

Trouble shooting:

Error Message

Problem

Solution

Error 5~9, the system is not functioning properly.

Unload the battery, wait for 1 minute and repower it. If the message

reappears, contact the retailer for service.

Measurement before device stabilization.

Wait for “Er1” to disappear.

The ambient temperature is not within the range between 50oF~104oF (10oC~40oC).

Allow the thermometer to rest in a room for at least 15 minutes at room

temperature: 50oF~104oF (10oC~40oC).

(1) In forehead mode: Temperature taken is higher than 108°F (+42.2oC)

(2) In surface mode: Temperature taken is higher than 176°F (+80oC)

Please select the target within specifications. If a malfunction still exists,

please contact the nearest retailer.

(1) In forehead mode: Temperature taken is lower than 93.2°F (+34oC)

(2) In surface mode: Temperature taken is lower than –7.6°F (-22oC)

Device cannot be powered on to the ready stage.

Change with a new battery.

Warranty:

Warranty: 12 months

Manufacture Date: as the serial number (please open the battery cover, it is shown on the inside of the device.)

Ex.SN:E512A000001, the first “E” is External, the second number “5” is the last number of manufacture year, the third and the fourth number “12” is the manufacture

month, the others is the serial number.

Note: The thermometer is calibrated at the time of manufacture. If you question calibration mode, the accuracy of temperature measurements or unexpected

events at any time, please contact the dealers or nearest service address.

Warning: No modification of this equipment is allowed.

Please read the instructions for use BF type applied part

Radiant Innovation Inc.

Http://www.radiantek.com.tw

Add: 1F, No.3, Industrial East 9th Road,

Science-Based Industrial Park, HsinChu, Taiwan 300.

Figure 1Figure 2Figure 3

Fehler 5~9, das System funktioniert nicht

ordnungsgemäß.

Entladen Sie die Batterien, warten Sie 1

Minute und schalten Sie erneut ein. Falls die

Fehlermeldung nochmals erscheint, kontaktieren

Sie den Kundendienst.

Ref No.：032020

Press the “ON/MEM” button to power on the device. Forehead mode is the default mode. You can see the icon on the screen

and hear two beep sounds (see figure 1). In this mode, you can hold the thermometer within 4 cm from the central forehead (Fig. 2) and press

the "START" button to get the forehead measurement. The time consuming for measurement might be 1 second. After each forehead

measurement, wait icon stop flashing to be ready for next measurement.

Figure 2

Points for attention:

a. Forehead temperature is displayed in oral mode. This mode converts the forehead temperature to display its “oral-equivalent” value.

b. Before the measurement, the subject should stay in a stable environment for 5 minutes and avoid exercise, bath for 30mins.

c. Remember to keep the forehead area clean and away from sweat, cosmetics and scar while taking temperature.

d. The “Clinical Bias” is -2.5 ~ -3.1°F (-1.4 ~ -1.7

C).

e. The “Limits of Agreement” is 0.98.

f. The "Repeatability" is 0.36°F(0.20

4. Measuring surface temperature:

4.1 After power on, press and hold the “ON/MEM” button, and press the “START” button one time for “Infrared thermometer” mode to see icon on your LCD

display. In this mode, you can get the target surface temperature.

4.2 When you press the “START” button, you will get the real time temperature immediately. If you press and hold the “START” button, the reading of measurement will

be continuously updated.

4.3 Applications include temperature measurements for water, milk, cloth, skin or other objects.

* Note: This mode shows the actual and unadjusted surface temperature which is different from the body temperature.

5. Power off:

5.1 Device will automatically shut off if left idle for more than 1 minute to extend battery life.

5.2 Manually power off the device by pressing the “ON/MEM” button.

Important Notes

Cleaning

And Storage

Please make sure the probe is clean to ensure an accurate reading.

The probe lens is the most delicate part of the thermometer. Use with care when cleaning the probe lens to avoid damage.

a. Use alcohol swabs or cotton swabs moistened with 70%~75% alcohol to clean the probe lens.

b. Allow the probe to fully dry for at least 1 minute.

c. Keep the unit dry and away from any liquids and direct sunlight.

d. Storage temperature range: It should be stored at room temperature between -4~122°F (-20~+50°C),RH

≦

85%

e. The Probe should not be submerged into liquids.

Holding the thermometer too long may cause a higher ambient temperature reading of the probe.

This could make the body temperature measurement lower than usual.

Battery replacement

When the “Low Battery” icon indicates the battery is low, the battery should be replaced immediately with AAA *2 pcs batteries.

1. Open the battery cover: Use the thumbs to push battery cover out. (See Figure 1)

2. Insert the new AAA *2 pcs batteries. (See Figure 2)

3. Replace the battery cover. (See Figure 3)

Trouble shooting:

Error Message

Problem

Solution

Error 5~9, the system is not functioning properly.

Unload the battery, wait for 1 minute and repower it. If the message

reappears, contact the retailer for service.

Measurement before device stabilization.

Wait for “Er1” to disappear.

The ambient temperature is not within the range between 50oF~104oF (10oC~40oC).

Allow the thermometer to rest in a room for at least 15 minutes at room

temperature: 50oF~104oF (10oC~40oC).

(1) In forehead mode: Temperature taken is higher than 108°F (+42.2oC)

(2) In surface mode: Temperature taken is higher than 176°F (+80oC)

Please select the target within specifications. If a malfunction still exists,

please contact the nearest retailer.

(1) In forehead mode: Temperature taken is lower than 93.2°F (+34oC)

(2) In surface mode: Temperature taken is lower than –7.6°F (-22oC)

Device cannot be powered on to the ready stage.

Change with a new battery.

Warranty:

Warranty: 12 months

Manufacture Date: as the serial number (please open the battery cover, it is shown on the inside of the device.)

Ex.SN:E512A000001, the first “E” is External, the second number “5” is the last number of manufacture year, the third and the fourth number “12” is the manufacture

month, the others is the serial number.

Note: The thermometer is calibrated at the time of manufacture. If you question calibration mode, the accuracy of temperature measurements or unexpected

events at any time, please contact the dealers or nearest service address.

Warning: No modification of this equipment is allowed.

Please read the instructions for use BF type applied part

Radiant Innovation Inc.

Http://www.radiantek.com.tw

Add: 1F, No.3, Industrial East 9th Road,

Science-Based Industrial Park, HsinChu, Taiwan 300.

Figure 1Figure 2Figure 3

Messung vor Gerätestabilisierung. Warten Sie, bis “Er1” verschwindet.

Ref No.：032020

Press the “ON/MEM” button to power on the device. Forehead mode is the default mode. You can see the icon on the screen

and hear two beep sounds (see figure 1). In this mode, you can hold the thermometer within 4 cm from the central forehead (Fig. 2) and press

the "START" button to get the forehead measurement. The time consuming for measurement might be 1 second. After each forehead

measurement, wait icon stop flashing to be ready for next measurement.

Figure 2

Points for attention:

a. Forehead temperature is displayed in oral mode. This mode converts the forehead temperature to display its “oral-equivalent” value.

b. Before the measurement, the subject should stay in a stable environment for 5 minutes and avoid exercise, bath for 30mins.

c. Remember to keep the forehead area clean and away from sweat, cosmetics and scar while taking temperature.

d. The “Clinical Bias” is -2.5 ~ -3.1°F (-1.4 ~ -1.7

C).

e. The “Limits of Agreement” is 0.98.

f. The "Repeatability" is 0.36°F(0.20

4. Measuring surface temperature:

4.1 After power on, press and hold the “ON/MEM” button, and press the “START” button one time for “Infrared thermometer” mode to see icon on your LCD

display. In this mode, you can get the target surface temperature.

4.2 When you press the “START” button, you will get the real time temperature immediately. If you press and hold the “START” button, the reading of measurement will

be continuously updated.

4.3 Applications include temperature measurements for water, milk, cloth, skin or other objects.

* Note: This mode shows the actual and unadjusted surface temperature which is different from the body temperature.

5. Power off:

5.1 Device will automatically shut off if left idle for more than 1 minute to extend battery life.

5.2 Manually power off the device by pressing the “ON/MEM” button.

Important Notes

Cleaning

And Storage

Please make sure the probe is clean to ensure an accurate reading.

The probe lens is the most delicate part of the thermometer. Use with care when cleaning the probe lens to avoid damage.

a. Use alcohol swabs or cotton swabs moistened with 70%~75% alcohol to clean the probe lens.

b. Allow the probe to fully dry for at least 1 minute.

c. Keep the unit dry and away from any liquids and direct sunlight.

d. Storage temperature range: It should be stored at room temperature between -4~122°F (-20~+50°C),RH

≦

85%

e. The Probe should not be submerged into liquids.

Holding the thermometer too long may cause a higher ambient temperature reading of the probe.

This could make the body temperature measurement lower than usual.

Battery replacement

When the “Low Battery” icon indicates the battery is low, the battery should be replaced immediately with AAA *2 pcs batteries.

1. Open the battery cover: Use the thumbs to push battery cover out. (See Figure 1)

2. Insert the new AAA *2 pcs batteries. (See Figure 2)

3. Replace the battery cover. (See Figure 3)

Trouble shooting:

Error Message

Problem

Solution

Error 5~9, the system is not functioning properly.

Unload the battery, wait for 1 minute and repower it. If the message

reappears, contact the retailer for service.

Measurement before device stabilization.

Wait for “Er1” to disappear.

The ambient temperature is not within the range between 50oF~104oF (10oC~40oC).

Allow the thermometer to rest in a room for at least 15 minutes at room

temperature: 50oF~104oF (10oC~40oC).

(1) In forehead mode: Temperature taken is higher than 108°F (+42.2oC)

(2) In surface mode: Temperature taken is higher than 176°F (+80oC)

Please select the target within specifications. If a malfunction still exists,

please contact the nearest retailer.

(1) In forehead mode: Temperature taken is lower than 93.2°F (+34oC)

(2) In surface mode: Temperature taken is lower than –7.6°F (-22oC)

Device cannot be powered on to the ready stage.

Change with a new battery.

Warranty:

Warranty: 12 months

Manufacture Date: as the serial number (please open the battery cover, it is shown on the inside of the device.)

Ex.SN:E512A000001, the first “E” is External, the second number “5” is the last number of manufacture year, the third and the fourth number “12” is the manufacture

month, the others is the serial number.

Note: The thermometer is calibrated at the time of manufacture. If you question calibration mode, the accuracy of temperature measurements or unexpected

events at any time, please contact the dealers or nearest service address.

Warning: No modification of this equipment is allowed.

Please read the instructions for use BF type applied part

Radiant Innovation Inc.

Http://www.radiantek.com.tw

Add: 1F, No.3, Industrial East 9th Road,

Science-Based Industrial Park, HsinChu, Taiwan 300.

Figure 1Figure 2Figure 3

Die Umgebungstemperatur liegt nicht

innerhalb des Bereichs, zwischen 10°C~40°C

(50°F~104°F)

Lassen Sie das Thermometer mindestens 15

Minuten in einem Raum, bei Raumtemperatur,

ruhen: 10°C~40°C (50°F~104°F)

Ref No.：032020

Press the “ON/MEM” button to power on the device. Forehead mode is the default mode. You can see the icon on the screen

and hear two beep sounds (see figure 1). In this mode, you can hold the thermometer within 4 cm from the central forehead (Fig. 2) and press

the "START" button to get the forehead measurement. The time consuming for measurement might be 1 second. After each forehead

measurement, wait icon stop flashing to be ready for next measurement.

Figure 2

Points for attention:

a. Forehead temperature is displayed in oral mode. This mode converts the forehead temperature to display its “oral-equivalent” value.

b. Before the measurement, the subject should stay in a stable environment for 5 minutes and avoid exercise, bath for 30mins.

c. Remember to keep the forehead area clean and away from sweat, cosmetics and scar while taking temperature.

d. The “Clinical Bias” is -2.5 ~ -3.1°F (-1.4 ~ -1.7

C).

e. The “Limits of Agreement” is 0.98.

f. The "Repeatability" is 0.36°F(0.20

4. Measuring surface temperature:

4.1 After power on, press and hold the “ON/MEM” button, and press the “START” button one time for “Infrared thermometer” mode to see icon on your LCD

display. In this mode, you can get the target surface temperature.

4.2 When you press the “START” button, you will get the real time temperature immediately. If you press and hold the “START” button, the reading of measurement will

be continuously updated.

4.3 Applications include temperature measurements for water, milk, cloth, skin or other objects.

* Note: This mode shows the actual and unadjusted surface temperature which is different from the body temperature.

5. Power off:

5.1 Device will automatically shut off if left idle for more than 1 minute to extend battery life.

5.2 Manually power off the device by pressing the “ON/MEM” button.

Important Notes

Cleaning

And Storage

Please make sure the probe is clean to ensure an accurate reading.

The probe lens is the most delicate part of the thermometer. Use with care when cleaning the probe lens to avoid damage.

a. Use alcohol swabs or cotton swabs moistened with 70%~75% alcohol to clean the probe lens.

b. Allow the probe to fully dry for at least 1 minute.

c. Keep the unit dry and away from any liquids and direct sunlight.

d. Storage temperature range: It should be stored at room temperature between -4~122°F (-20~+50°C),RH

≦

85%

e. The Probe should not be submerged into liquids.

Holding the thermometer too long may cause a higher ambient temperature reading of the probe.

This could make the body temperature measurement lower than usual.

Battery replacement

When the “Low Battery” icon indicates the battery is low, the battery should be replaced immediately with AAA *2 pcs batteries.

1. Open the battery cover: Use the thumbs to push battery cover out. (See Figure 1)

2. Insert the new AAA *2 pcs batteries. (See Figure 2)

3. Replace the battery cover. (See Figure 3)

Trouble shooting:

Error Message

Problem

Solution

Error 5~9, the system is not functioning properly.

Unload the battery, wait for 1 minute and repower it. If the message

reappears, contact the retailer for service.

Measurement before device stabilization.

Wait for “Er1” to disappear.

The ambient temperature is not within the range between 50oF~104oF (10oC~40oC).

Allow the thermometer to rest in a room for at least 15 minutes at room

temperature: 50oF~104oF (10oC~40oC).

(1) In forehead mode: Temperature taken is higher than 108°F (+42.2oC)

(2) In surface mode: Temperature taken is higher than 176°F (+80oC)

Please select the target within specifications. If a malfunction still exists,

please contact the nearest retailer.

(1) In forehead mode: Temperature taken is lower than 93.2°F (+34oC)

(2) In surface mode: Temperature taken is lower than –7.6°F (-22oC)

Device cannot be powered on to the ready stage.

Change with a new battery.

Warranty:

Warranty: 12 months

Manufacture Date: as the serial number (please open the battery cover, it is shown on the inside of the device.)

Ex.SN:E512A000001, the first “E” is External, the second number “5” is the last number of manufacture year, the third and the fourth number “12” is the manufacture

month, the others is the serial number.

Note: The thermometer is calibrated at the time of manufacture. If you question calibration mode, the accuracy of temperature measurements or unexpected

events at any time, please contact the dealers or nearest service address.

Warning: No modification of this equipment is allowed.

Please read the instructions for use BF type applied part

Radiant Innovation Inc.

Http://www.radiantek.com.tw

Add: 1F, No.3, Industrial East 9th Road,

Science-Based Industrial Park, HsinChu, Taiwan 300.

Figure 1Figure 2Figure 3

(1) Im Stirn-Modus: gemessene Temperatur ist

höher als 108°F (42,2°C)

(2) Im Oberﬂächen-Modus: gemessene

Temperatur ist höher als 80°C (176°F) Bitte wählen Sie das Ziel innerhalb der

Speziﬁkationen aus. Falls immer noch eine

Fehlfunktion besteht, kontaktieren Sie bitte den

Kundendienst.

Ref No.：032020

Press the “ON/MEM” button to power on the device. Forehead mode is the default mode. You can see the icon on the screen

and hear two beep sounds (see figure 1). In this mode, you can hold the thermometer within 4 cm from the central forehead (Fig. 2) and press

the "START" button to get the forehead measurement. The time consuming for measurement might be 1 second. After each forehead

measurement, wait icon stop flashing to be ready for next measurement.

Figure 2

Points for attention:

a. Forehead temperature is displayed in oral mode. This mode converts the forehead temperature to display its “oral-equivalent” value.

b. Before the measurement, the subject should stay in a stable environment for 5 minutes and avoid exercise, bath for 30mins.

c. Remember to keep the forehead area clean and away from sweat, cosmetics and scar while taking temperature.

d. The “Clinical Bias” is -2.5 ~ -3.1°F (-1.4 ~ -1.7

C).

e. The “Limits of Agreement” is 0.98.

f. The "Repeatability" is 0.36°F(0.20

4. Measuring surface temperature:

4.1 After power on, press and hold the “ON/MEM” button, and press the “START” button one time for “Infrared thermometer” mode to see icon on your LCD

display. In this mode, you can get the target surface temperature.

4.2 When you press the “START” button, you will get the real time temperature immediately. If you press and hold the “START” button, the reading of measurement will

be continuously updated.

4.3 Applications include temperature measurements for water, milk, cloth, skin or other objects.

* Note: This mode shows the actual and unadjusted surface temperature which is different from the body temperature.

5. Power off:

5.1 Device will automatically shut off if left idle for more than 1 minute to extend battery life.

5.2 Manually power off the device by pressing the “ON/MEM” button.

Important Notes

Cleaning

And Storage

Please make sure the probe is clean to ensure an accurate reading.

The probe lens is the most delicate part of the thermometer. Use with care when cleaning the probe lens to avoid damage.

a. Use alcohol swabs or cotton swabs moistened with 70%~75% alcohol to clean the probe lens.

b. Allow the probe to fully dry for at least 1 minute.

c. Keep the unit dry and away from any liquids and direct sunlight.

d. Storage temperature range: It should be stored at room temperature between -4~122°F (-20~+50°C),RH

≦

85%

e. The Probe should not be submerged into liquids.

Holding the thermometer too long may cause a higher ambient temperature reading of the probe.

This could make the body temperature measurement lower than usual.

Battery replacement

When the “Low Battery” icon indicates the battery is low, the battery should be replaced immediately with AAA *2 pcs batteries.

1. Open the battery cover: Use the thumbs to push battery cover out. (See Figure 1)

2. Insert the new AAA *2 pcs batteries. (See Figure 2)

3. Replace the battery cover. (See Figure 3)

Trouble shooting:

Error Message

Problem

Solution

Error 5~9, the system is not functioning properly.

Unload the battery, wait for 1 minute and repower it. If the message

reappears, contact the retailer for service.

Measurement before device stabilization.

Wait for “Er1” to disappear.

The ambient temperature is not within the range between 50oF~104oF (10oC~40oC).

Allow the thermometer to rest in a room for at least 15 minutes at room

temperature: 50oF~104oF (10oC~40oC).

(1) In forehead mode: Temperature taken is higher than 108°F (+42.2oC)

(2) In surface mode: Temperature taken is higher than 176°F (+80oC)

Please select the target within specifications. If a malfunction still exists,

please contact the nearest retailer.

(1) In forehead mode: Temperature taken is lower than 93.2°F (+34oC)

(2) In surface mode: Temperature taken is lower than –7.6°F (-22oC)

Device cannot be powered on to the ready stage.

Change with a new battery.

Warranty:

Warranty: 12 months

Manufacture Date: as the serial number (please open the battery cover, it is shown on the inside of the device.)

Ex.SN:E512A000001, the first “E” is External, the second number “5” is the last number of manufacture year, the third and the fourth number “12” is the manufacture

month, the others is the serial number.

Note: The thermometer is calibrated at the time of manufacture. If you question calibration mode, the accuracy of temperature measurements or unexpected

events at any time, please contact the dealers or nearest service address.

Warning: No modification of this equipment is allowed.

Please read the instructions for use BF type applied part

Radiant Innovation Inc.

Http://www.radiantek.com.tw

Add: 1F, No.3, Industrial East 9th Road,

Science-Based Industrial Park, HsinChu, Taiwan 300.

Figure 1Figure 2Figure 3

(1) Im Stirn-Modus: gemessene Temperatur ist

niedriger als +34°C ( 93,2°F)

(2) Im Oberﬂächen-Modus: gemessene

Temperatur ist niedriger als -22°C (-7,6°F)

Ref No.：032020

Press the “ON/MEM” button to power on the device. Forehead mode is the default mode. You can see the icon on the screen

and hear two beep sounds (see figure 1). In this mode, you can hold the thermometer within 4 cm from the central forehead (Fig. 2) and press

the "START" button to get the forehead measurement. The time consuming for measurement might be 1 second. After each forehead

measurement, wait icon stop flashing to be ready for next measurement.

Figure 2

Points for attention:

a. Forehead temperature is displayed in oral mode. This mode converts the forehead temperature to display its “oral-equivalent” value.

b. Before the measurement, the subject should stay in a stable environment for 5 minutes and avoid exercise, bath for 30mins.

c. Remember to keep the forehead area clean and away from sweat, cosmetics and scar while taking temperature.

d. The “Clinical Bias” is -2.5 ~ -3.1°F (-1.4 ~ -1.7

C).

e. The “Limits of Agreement” is 0.98.

f. The "Repeatability" is 0.36°F(0.20

4. Measuring surface temperature:

4.1 After power on, press and hold the “ON/MEM” button, and press the “START” button one time for “Infrared thermometer” mode to see icon on your LCD

display. In this mode, you can get the target surface temperature.

4.2 When you press the “START” button, you will get the real time temperature immediately. If you press and hold the “START” button, the reading of measurement will

be continuously updated.

4.3 Applications include temperature measurements for water, milk, cloth, skin or other objects.

* Note: This mode shows the actual and unadjusted surface temperature which is different from the body temperature.

5. Power off:

5.1 Device will automatically shut off if left idle for more than 1 minute to extend battery life.

5.2 Manually power off the device by pressing the “ON/MEM” button.

Important Notes

Cleaning

And Storage

Please make sure the probe is clean to ensure an accurate reading.

The probe lens is the most delicate part of the thermometer. Use with care when cleaning the probe lens to avoid damage.

a. Use alcohol swabs or cotton swabs moistened with 70%~75% alcohol to clean the probe lens.

b. Allow the probe to fully dry for at least 1 minute.

c. Keep the unit dry and away from any liquids and direct sunlight.

d. Storage temperature range: It should be stored at room temperature between -4~122°F (-20~+50°C),RH

≦

85%

e. The Probe should not be submerged into liquids.

Holding the thermometer too long may cause a higher ambient temperature reading of the probe.

This could make the body temperature measurement lower than usual.

Battery replacement

When the “Low Battery” icon indicates the battery is low, the battery should be replaced immediately with AAA *2 pcs batteries.

1. Open the battery cover: Use the thumbs to push battery cover out. (See Figure 1)

2. Insert the new AAA *2 pcs batteries. (See Figure 2)

3. Replace the battery cover. (See Figure 3)

Trouble shooting:

Error Message

Problem

Solution

Error 5~9, the system is not functioning properly.

Unload the battery, wait for 1 minute and repower it. If the message

reappears, contact the retailer for service.

Measurement before device stabilization.

Wait for “Er1” to disappear.

The ambient temperature is not within the range between 50oF~104oF (10oC~40oC).

Allow the thermometer to rest in a room for at least 15 minutes at room

temperature: 50oF~104oF (10oC~40oC).

(1) In forehead mode: Temperature taken is higher than 108°F (+42.2oC)

(2) In surface mode: Temperature taken is higher than 176°F (+80oC)

Please select the target within specifications. If a malfunction still exists,

please contact the nearest retailer.

(1) In forehead mode: Temperature taken is lower than 93.2°F (+34oC)

(2) In surface mode: Temperature taken is lower than –7.6°F (-22oC)

Device cannot be powered on to the ready stage.

Change with a new battery.

Warranty:

Warranty: 12 months

Manufacture Date: as the serial number (please open the battery cover, it is shown on the inside of the device.)

Ex.SN:E512A000001, the first “E” is External, the second number “5” is the last number of manufacture year, the third and the fourth number “12” is the manufacture

month, the others is the serial number.

Note: The thermometer is calibrated at the time of manufacture. If you question calibration mode, the accuracy of temperature measurements or unexpected

events at any time, please contact the dealers or nearest service address.

Warning: No modification of this equipment is allowed.

Please read the instructions for use BF type applied part

Radiant Innovation Inc.

Http://www.radiantek.com.tw

Add: 1F, No.3, Industrial East 9th Road,

Science-Based Industrial Park, HsinChu, Taiwan 300.

Figure 1Figure 2Figure 3

Gerät kann nicht in den Bereitschaftszustand

eingeschaltet werden.

Setzen Sie neue Batterien ein.

10 www.mastercool.com

HERSTELLERERKLÄRUNG - ELEKTROMAGNETISCHE STÖRFESTIGKEIT

Vorgesehen für die Verwendung in der unten angegebenen elektromagnetischen Umgebung (für häusliche

Gesundheitsversorgung). Der Kunde oder Benutzer sollte sicherstellen, dass es in einer solchen Umgebung verwendet

wird.

EMISSIONSPRÜFUNG KONFORMITÄT ELEKTROMAGNETISCHE UMGEBUNG - ANLEITUNG (FÜR HÄUSLICHE

GESUNDHEITSVERSORGUNGSUMGEBUNG)

RF emissions

CISPR 11 Gruppe 1

Dieses Gerät verwendet HF-Energie nur für seine interne Funktion. Daher

sind seine HF-Emissionen sehr niedrig und es ist unwahrscheinlich, dass sie

Störungen in nahegelegener elektronischer Ausrüstung verursachen.

RF emissions

CISPR 11 Klasse B

Dieses Gerät eignet sich zur Verwendung in allen Einrichtungen, einschließlich

häuslichen Einrichtungen und jenen, die direkt an das öffentliche

Niederspannungsnetz angeschlossen sind, welches Gebäude für häusliche

Zwecke versorgt.

HERSTELLERERKLÄRUNG - ELEKTROMAGNETISCHE STÖRFESTIGKEIT

Vorgesehen für die Verwendung in der unten angegebenen elektromagnetischen Umgebung (für häusliche

Gesundheitsversorgung). Der Kunde oder Benutzer sollte sicherstellen, dass es in einer solchen Umgebung verwendet

wird.

STÖRFESTIGKEIT-

SPRÜFUNG IEC 60601 PRÜFSTUFE KONFORMITÄTSPEGEL

ELEKTROMAGNETISCHE UMGEBUNG - ANLEI-

TUNG (FÜR HÄUSLICHE GESUNDHEITSVER-

SORGUNGSUMGEBUNG)

Elektrostatische

Entladung (ESD) IEC

61000-4-2

Kontakt: ±8 kV

Luft ±2 kV, ±4 kV, ±8

kV, ±15 kV

Kontakt: ±8 kV

Luft ±2 kV, ±4 kV, ±8

kV, ±15 kV

Die Böden sollten aus Holz, Beton oder

Keramikﬂiesen bestehen. Falls Böden mit

synthetischem Material bedeckt sind, sollte die

relative Feuchte mindestens 30% betragen.

Netzfrequenz (50,60

Hz) Magnetfeld IEC

61000-4-8

30 A/m 50 Hz oder

60 Hz

30 A/m 50 Hz und

60 Hz

Netzfrequenz-Magnetfelder sollten sich auf

einer Stufe beﬁnden, die einem typischen

Standort in einer typischen häuslichen Gesund-

heitsversorgungsumgebung entspricht.

HERSTELLERERKLÄRUNG - ELEKTROMAGNETISCHE STÖRFESTIGKEIT

Vorgesehen für die Verwendung in der unten angegebenen elektromagnetischen Umgebung (für häusliche

Gesundheitsversorgung. Der Kunde oder Benutzer sollte sicherstellen, dass es in einer solchen Umgebung verwendet wird.

STÖRFESTIG-

KEITSPRÜFUNG

IEC 60601

PRÜFSTUFE

KONFORMITÄT-

SPEGEL

ELEKTROMAGNETISCHE UMGEBUNG - ANLEITUNG (FÜR HÄUSLI-

CHE GESUNDHEITSVERSORGUNGSUMGEBUNG)

Abgestrahlte HF

IEC 610004-3

10 V/m

80 MHz - 2,7

GHz

80% AM bei

1 kHz

10 V/m

80 MHz - 2,7

GHz

80% AM bei

1 kHz

Empfohlener Trennungsabstand:

d = 1,2

Symbol Descriptions

Caution

Please read the instructions for use

Battery Recycling

BF type applied part

Paper Recycling

Stand-by

IP22

Classification for water ingress and

particulate matter.

Manufacturer’s declaration-electromagnetic emissions

The THD2FE is intended for use in the electromagnetic environment (for home healthcare) specified below.The customer or the user of the THD2FE

should assure that it is used in such an environment.

Emissions test

Compliance

Electromagnetic environment – guidance

(for home healthcare environment)

RF emissions

CISPR 11

Group 1

The THD2FE uses RF energy only for its internal function. Therefore, its RF emissions are very

low and are not likely to cause any interference in nearby electronic equipment.

RF emissions

CISPR 11

Class B

The THD2FE is suitable for use in all establishments, including domestic establishments and

those directly connected to the public low-voltage power supply network that supplies buildings

used for domestic purposes.

Manufacturer’s declaration – electromagnetic immunity

The THD2FE is intended for use in the electromagnetic environment (for home healthcare) specified below. The customer or the user of the THD2FE

should assure that it is used in such an environment.

Immunity test

IEC 60601 test level

Compliance level

Electromagnetic environment – guidance

(for home healthcare environment)

Electrostatic discharge(ESD)

IEC 61000-4-2

Contact:±8 kV

Air±2 kV,±4 kV,±8

kV,±15 kV

Contact:±8 kV

Air±2 kV,±4 kV,±8

kV,±15 Kv

Floors should be wood, concrete or ceramic tile. If floors are covered

with synthetic material, the relative humidity should be at least 30%

Power frequency(50, 60 Hz)

magnetic field IEC 61000-4-8

30 A/m

50 Hz or 60 Hz

30 A/m

50 Hz and 60 Hz

The THD2FE power frequency magnetic fields should be at levels

characteristic of a typical location in a typical home healthcare

environment.

Manufacturer’s declaration – electromagnetic immunity

The THD2FE is intended for use in the electromagnetic environment (for home healthcare) specified below. The customer or the user of the THD2FE

should assure that it is used in such an environment.

Immunity test

IEC 60601 test level

Compliance

level

Electromagnetic environment – guidance

(for home healthcare environment)

Radiated RF

IEC 61000-4-3

10 V/m

80 MHz – 2,7 GHz

80 % AM at 1 kHz

10 V/m

80 MHz – 2,7

GHz

80 % AM at 1

kHz

Recommended separation distance:

d = 1,2

d = 1,2 80MHz to 800 MHz

d = 2,3 800MHz to 2,7 GHz

Where P is the maximum output power rating of the transmitter in watts (W) according to

the transmitter manufacturer and d is the recommended separation distance in metres

(m).

Field strengths from fixed RF transmitters, as determined by an electromagnetic site

survey, a should be less than the compliance level in each frequency range.b

Interference may occur in the vicinity of equipment marked with the following

symbol:

NOTE1 At 80 MHz and 800 MHz, the higher frequency range applies.

NOTE2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection from structures, objects

and people.

Field strengths from fixed transmitters, such as base stations for radio (cellular/cordless) telephones and land mobile radios, amateur radio, AM and FM

radio broadcast and TV broadcast cannot be predicted theoretically with accuracy. To assess the electromagnetic environment due to fixed RF

transmitters, an electromagnetic site survey should be considered. If the measured field strength in the location in which the THD2FE is used exceeds the

applicable RF compliance level above, the THD2FE should be observed to verify normal operation. If abnormal performance is observed, additional

measures may be necessary, such as re-orienting or relocating the THD2FE.

Recommended separation distances between

portable and mobile RF communications equipment and the THD2FE

d = 1,2

Symbol Descriptions

Caution

Please read the instructions for use

Battery Recycling

BF type applied part

Paper Recycling

Stand-by

IP22

Classification for water ingress and

particulate matter.

Manufacturer’s declaration-electromagnetic emissions

The THD2FE is intended for use in the electromagnetic environment (for home healthcare) specified below.The customer or the user of the THD2FE

should assure that it is used in such an environment.

Emissions test

Compliance

Electromagnetic environment – guidance

(for home healthcare environment)

RF emissions

CISPR 11

Group 1

The THD2FE uses RF energy only for its internal function. Therefore, its RF emissions are very

low and are not likely to cause any interference in nearby electronic equipment.

RF emissions

CISPR 11

Class B

The THD2FE is suitable for use in all establishments, including domestic establishments and

those directly connected to the public low-voltage power supply network that supplies buildings

used for domestic purposes.

Manufacturer’s declaration – electromagnetic immunity

The THD2FE is intended for use in the electromagnetic environment (for home healthcare) specified below. The customer or the user of the THD2FE

should assure that it is used in such an environment.

Immunity test

IEC 60601 test level

Compliance level

Electromagnetic environment – guidance

(for home healthcare environment)

Electrostatic discharge(ESD)

IEC 61000-4-2

Contact:±8 kV

Air±2 kV,±4 kV,±8

kV,±15 kV

Contact:±8 kV

Air±2 kV,±4 kV,±8

kV,±15 Kv

Floors should be wood, concrete or ceramic tile. If floors are covered

with synthetic material, the relative humidity should be at least 30%

Power frequency(50, 60 Hz)

magnetic field IEC 61000-4-8

30 A/m

50 Hz or 60 Hz

30 A/m

50 Hz and 60 Hz

The THD2FE power frequency magnetic fields should be at levels

characteristic of a typical location in a typical home healthcare

environment.

Manufacturer’s declaration – electromagnetic immunity

The THD2FE is intended for use in the electromagnetic environment (for home healthcare) specified below. The customer or the user of the THD2FE

should assure that it is used in such an environment.

Immunity test

IEC 60601 test level

Compliance

level

Electromagnetic environment – guidance

(for home healthcare environment)

Radiated RF

IEC 61000-4-3

10 V/m

80 MHz – 2,7 GHz

80 % AM at 1 kHz

10 V/m

80 MHz – 2,7

GHz

80 % AM at 1

kHz

Recommended separation distance:

d = 1,2

d = 1,2 80MHz to 800 MHz

d = 2,3 800MHz to 2,7 GHz

Where P is the maximum output power rating of the transmitter in watts (W) according to

the transmitter manufacturer and d is the recommended separation distance in metres

(m).

Field strengths from fixed RF transmitters, as determined by an electromagnetic site

survey, a should be less than the compliance level in each frequency range.b

Interference may occur in the vicinity of equipment marked with the following

symbol:

NOTE1 At 80 MHz and 800 MHz, the higher frequency range applies.

NOTE2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection from structures, objects

and people.

Field strengths from fixed transmitters, such as base stations for radio (cellular/cordless) telephones and land mobile radios, amateur radio, AM and FM

radio broadcast and TV broadcast cannot be predicted theoretically with accuracy. To assess the electromagnetic environment due to fixed RF

transmitters, an electromagnetic site survey should be considered. If the measured field strength in the location in which the THD2FE is used exceeds the

applicable RF compliance level above, the THD2FE should be observed to verify normal operation. If abnormal performance is observed, additional

measures may be necessary, such as re-orienting or relocating the THD2FE.

Recommended separation distances between

portable and mobile RF communications equipment and the THD2FE

80 MHz bis 800 MHz

d = 2,3

Symbol Descriptions

Caution

Please read the instructions for use

Battery Recycling

BF type applied part

Paper Recycling

Stand-by

IP22

Classification for water ingress and

particulate matter.

Manufacturer’s declaration-electromagnetic emissions

The THD2FE is intended for use in the electromagnetic environment (for home healthcare) specified below.The customer or the user of the THD2FE

should assure that it is used in such an environment.

Emissions test

Compliance

Electromagnetic environment – guidance

(for home healthcare environment)

RF emissions

CISPR 11

Group 1

The THD2FE uses RF energy only for its internal function. Therefore, its RF emissions are very

low and are not likely to cause any interference in nearby electronic equipment.

RF emissions

CISPR 11

Class B

The THD2FE is suitable for use in all establishments, including domestic establishments and

those directly connected to the public low-voltage power supply network that supplies buildings

used for domestic purposes.

Manufacturer’s declaration – electromagnetic immunity

The THD2FE is intended for use in the electromagnetic environment (for home healthcare) specified below. The customer or the user of the THD2FE

should assure that it is used in such an environment.

Immunity test

IEC 60601 test level

Compliance level

Electromagnetic environment – guidance

(for home healthcare environment)

Electrostatic discharge(ESD)

IEC 61000-4-2

Contact:±8 kV

Air±2 kV,±4 kV,±8

kV,±15 kV

Contact:±8 kV

Air±2 kV,±4 kV,±8

kV,±15 Kv

Floors should be wood, concrete or ceramic tile. If floors are covered

with synthetic material, the relative humidity should be at least 30%

Power frequency(50, 60 Hz)

magnetic field IEC 61000-4-8

30 A/m

50 Hz or 60 Hz

30 A/m

50 Hz and 60 Hz

The THD2FE power frequency magnetic fields should be at levels

characteristic of a typical location in a typical home healthcare

environment.

Manufacturer’s declaration – electromagnetic immunity

The THD2FE is intended for use in the electromagnetic environment (for home healthcare) specified below. The customer or the user of the THD2FE

should assure that it is used in such an environment.

Immunity test

IEC 60601 test level

Compliance

level

Electromagnetic environment – guidance

(for home healthcare environment)

Radiated RF

IEC 61000-4-3

10 V/m

80 MHz – 2,7 GHz

80 % AM at 1 kHz

10 V/m

80 MHz – 2,7

GHz

80 % AM at 1

kHz

Recommended separation distance:

d = 1,2

d = 1,2 80MHz to 800 MHz

d = 2,3 800MHz to 2,7 GHz

Where P is the maximum output power rating of the transmitter in watts (W) according to

the transmitter manufacturer and d is the recommended separation distance in metres

(m).

Field strengths from fixed RF transmitters, as determined by an electromagnetic site

survey, a should be less than the compliance level in each frequency range.b

Interference may occur in the vicinity of equipment marked with the following

symbol:

NOTE1 At 80 MHz and 800 MHz, the higher frequency range applies.

NOTE2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection from structures, objects

and people.

Field strengths from fixed transmitters, such as base stations for radio (cellular/cordless) telephones and land mobile radios, amateur radio, AM and FM

radio broadcast and TV broadcast cannot be predicted theoretically with accuracy. To assess the electromagnetic environment due to fixed RF

transmitters, an electromagnetic site survey should be considered. If the measured field strength in the location in which the THD2FE is used exceeds the

applicable RF compliance level above, the THD2FE should be observed to verify normal operation. If abnormal performance is observed, additional

measures may be necessary, such as re-orienting or relocating the THD2FE.

Recommended separation distances between

portable and mobile RF communications equipment and the THD2FE

800 MHz bis 2,7 GHz

Wobei P die maximale Ausgangsnennleistung des Transmitters

in Watt (W) gemäß Transmitter-Hersteller und d der empfohlene

Trennungsabstand in Meter (m) ist.

Die Feldstärken aus fest installierten HF-Transmittern, wie durch

ein elektromagnetisches Standortgutachten festgelegt,

a) sollten niedriger sein als der Konformitätspegel in jedem

Frequenzbereich.

b) Störungen können in der Umgebung von Ausrüstung auftreten,

die mit dem folgenden Symbol markiert ist:

Symbol Descriptions

Caution

Please read the instructions for use

Battery Recycling

BF type applied part

Paper Recycling

Stand-by

IP22

Classification for water ingress and

particulate matter.

Manufacturer’s declaration-electromagnetic emissions

The THD2FE is intended for use in the electromagnetic environment (for home healthcare) specified below.The customer or the user of the THD2FE

should assure that it is used in such an environment.

Emissions test

Compliance

Electromagnetic environment – guidance

(for home healthcare environment)

RF emissions

CISPR 11

Group 1

The THD2FE uses RF energy only for its internal function. Therefore, its RF emissions are very

low and are not likely to cause any interference in nearby electronic equipment.

RF emissions

CISPR 11

Class B

The THD2FE is suitable for use in all establishments, including domestic establishments and

those directly connected to the public low-voltage power supply network that supplies buildings

used for domestic purposes.

Manufacturer’s declaration – electromagnetic immunity

The THD2FE is intended for use in the electromagnetic environment (for home healthcare) specified below. The customer or the user of the THD2FE

should assure that it is used in such an environment.

Immunity test

IEC 60601 test level

Compliance level

Electromagnetic environment – guidance

(for home healthcare environment)

Electrostatic discharge(ESD)

IEC 61000-4-2

Contact:±8 kV

Air±2 kV,±4 kV,±8

kV,±15 kV

Contact:±8 kV

Air±2 kV,±4 kV,±8

kV,±15 Kv

Floors should be wood, concrete or ceramic tile. If floors are covered

with synthetic material, the relative humidity should be at least 30%

Power frequency(50, 60 Hz)

magnetic field IEC 61000-4-8

30 A/m

50 Hz or 60 Hz

30 A/m

50 Hz and 60 Hz

The THD2FE power frequency magnetic fields should be at levels

characteristic of a typical location in a typical home healthcare

environment.

Manufacturer’s declaration – electromagnetic immunity

The THD2FE is intended for use in the electromagnetic environment (for home healthcare) specified below. The customer or the user of the THD2FE

should assure that it is used in such an environment.

Immunity test

IEC 60601 test level

Compliance

level

Electromagnetic environment – guidance

(for home healthcare environment)

Radiated RF

IEC 61000-4-3

10 V/m

80 MHz – 2,7 GHz

80 % AM at 1 kHz

10 V/m

80 MHz – 2,7

GHz

80 % AM at 1

kHz

Recommended separation distance:

d = 1,2

d = 1,2 80MHz to 800 MHz

d = 2,3 800MHz to 2,7 GHz

Where P is the maximum output power rating of the transmitter in watts (W ) according to

the transmitter manufacturer and d is the recommended separation distance in metres

(m).

Field strengths from fixed RF transmitters, as determined by an electromagnetic site

survey, a should be less than the compliance level in each frequency range.b

Interference may occur in the vicinity of equipment marked with the following

symbol:

NOTE1 At 80 MHz and 800 MHz, the higher frequency range applies.

NOTE2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection from structures, objects

and people.

Field strengths from fixed transmitters, such as base stations for radio (cellular/cordless) telephones and land mobile radios, amateur radio, AM and FM

radio broadcast and TV broadcast cannot be predicted theoretically with accuracy. To assess the electromagnetic environment d ue to fixed RF

transmitters, an electromagnetic site survey should be considered. If the measured field strength in the location in which the THD2FE is used exceeds the

applicable RF compliance level above, the THD2FE should be observed to verify normal operation. If abnormal performance is observed, additional

measures may be necessary, such as re-orienting or relocating the THD2FE.

Recommended separation distances between

portable and mobile RF communications equipment and the THD2FE

ANMERKUNG1 Bei 80 MHz und 800 MHz gilt der höhere Frequenzbereich.

ANMERKUNG2 Diese Richtlinien gelten möglicherweise nicht in allen Situationen. Die elektromagnetische Ausbreitung

wird beeinﬂusst durch Absorption und Reﬂexion von Baukörpern, Gegenständen und Personen.

Feldstärken von fest installierten Transmittern, wie z.B. Basisstationen für Funktelefone (mobil/schnurlos) und mobilen

Landfunk, Amateurfunk, Mittel- und Kurzwellen-Radiosendungen, können nicht theoretisch mit Genauigkeit vorhergesagt

werden. Um die elektromagnetische Umgebung aufgrund von fest installierten HF-Transmittern zu beurteilen, sollte ein

elektromagnetisches Standortgutachten in Betracht gezogen werden. Falls die gemessene Feldstärke an dem Standort,

an welchem das Thermometer verwendet wird, den oben genannten geltenden HF-Konformitätspegel überschreitet,

sollte dies beobachtet werden, um den Normalbetrieb zu veriﬁzieren. Wird abnorme Leistung beobachtet, können zusät-

zliche Maßnahmen, wie z.B. Neuausrichtung oder Verlegung des Gerätes, notwendig sein.