Setting Method
Keep pressing “SET” key and hold for 3 seconds into the setting mode.
Select measurement unit ---Menu F1
Enter into setting mode, the LCD displays “F1”, press “+” key to select “℉” unit, press
“-”key to select “℃” unit.
Warning value setting ---Menu F2
【
Default 37.8
℃
(100.4
℉
)
】
Enter into setting mode, short press “SET” key twice, the
LCD displays “F2”, then press “+” key to increase the setting value 0.1℃(0.1℉),
press“-” key to reduce the setting value0.1℃(0.1℉).
Offset value setting ---Menu F3
【
Default 0.0
℃
(0.0
℉
)
】
Enter into setting mode, press “SET” key triple, the LCD
display “ F3”, then press “+” key to increase the setting value 0.1 ℃(0.1℉), press “-”
key to reduce the setting value 0.1℃(0.1℉).
Sound notification setting
Enter into setting mode, press “SET” key four times, the LCD display “ F4”, then press
“+” key to turn on the sound notification function, press “-”key to turn off the sound
notification function.
Backlight setting
---Menu F5
Enter into setting mode, press “SET” key five times, the LCD display “ F5”, then press
“+” key to turn on the backlight function, press “-” key to turn offthe backlight
function.
Exit setting mode
Press “SET” key until shutdown.
Instructions for Re-calibration
For stable and reliable results, it is essential to check the forehead thermometer and
change as needed, as follows:
• Take the temperature of the same person using a conventional thermometer;
you will get 37.0℃$(98.6℉) for instance.
• Take the temperature of the same person using the forehead thermometer
keeping the 50 to 150 mm distance between the thermometer and the
forehead (Take care to remove any obstacle which could alter the
measurement (hair, perspiration…). If you get 37.0 ℃(98.6 ℉), the Non-
contact body infrared Thermometer is properly set and ready for use.
• If you get a lower temperature, 36.4℃$(97.4℉) for example, your difference is
0.6℃(1.2℉), you should adjust the temperature on the forehead
