Marathon SuperCap 1000VA Manuel utilisateur

TABLE OF CONTENTS

BEFORE YOU START: SAFETY……………………………………………………………………. 4

Safety Symbols ........................................................................................................ 4

System Safety Checklist ........................................................................................... 5

Future Servicing ....................................................................................................... 7

SECTION 1: GLOSSARY…………………………………………………….................................8

SECTION 2: DESCRIPTION OF YOUR SUPERCAP UPS SYSTEM ................................................ 9

Key Features ............................................................................................................ 9

Operation Modes .................................................................................................... 10

Application Backup Time Considerations ................................................................ 12

SECTION 3: INSTALLATION ............................................................................................... 13

UPS Module Rear Views ........................................................................................ 14

UPS Module Connector Layout .............................................................................. 15

Energy Storage Unit Connector Layout .................................................................. 15

Installation .............................................................................................................. 16

SECTION 4: OPERATION – LCD INTERFACE ........................................................................ 19

Front Panel Functions............................................................................................. 19

UPS Operation ....................................................................................................... 20

The Front Panel ...................................................................................................... 21

LCD Display Menu .................................................................................................. 25

SECTION 5: OPERATION – WEB INTERFACE ....................................................................... 27

Network Interface Card ........................................................................................... 27

UPS Module Web Interface Directory ..................................................................... 27

SECTION 6: COMMUNICATION ........................................................................................... 29

RS-232 Communication .......................................................................................... 29

Step by Step Connecting to Windows XP ............................................................... 30

Step by Step Connecting to Windows 7 .................................................................. 33

SECTION 7: TROUBLESHOOTING GUIDE ............................................................................. 36

SECTION 8: SPECIFICATIONS ............................................................................................ 40

120V Versions Specifications ................................................................................. 40

220V Versions Specifications ................................................................................. 41

EMC Statements .................................................................................................... 42

SECTION 9: SERVICE ....................................................................................................... 43

Warranty ................................................................................................................. 44

Return Instructions ................................................................................................. 45

Before You Start: Safety

Safety Symbols

*SAVE THESE INSTRUCTIONS*

Indicates there is a risk of electric shock. Extreme caution should be used.

DANGER!

Indicates that the operator’s manual should be referred to for additional information, such

as operating and maintenance.

CAUTION!

Indicates primary safe ground.

SAFE GROUND TERMINAL

LOAD ON/OFF

Indicates that the associated push-button turns the unit and its output receptacles on or off.

RJ-45 CONNECTOR

Indicates that the connector provides network interface connections and that telephone

or telecommunications equipment should not be plugged into it.

DISPOSAL

Indicates that the UPS and its energy storage components should be disposed of in the

correct manner.

NOTE / TIP:

Indicates additional information to assist the completion of a procedure or tips for ease

of operation.

System Safety Checklist

The instructions contained within this safety manual are extremely important and should

be closely followed at all times during installation and follow-up maintenance of the UPS

and batteries or Energy Storage Unit.

1. This manual contains important instructions that should be followed during Installation and

Maintenance of the UPS and Batteries or Energy Storage Unit.

2. The equipment can be operated by any individual. No previous experience is required.

3. DANGER: (UPS with Internal Supercapacitors): Risk of electric shock - Hazardous live parts

inside this unit may be energized from the Supercapacitor supply even when the input AC

power is disconnected.

4. DANGER: (No User Serviceable Parts): Risk of electric shock, do not remove cover. No user

serviceable parts inside. Refer servicing to qualified service personnel.

5. DANGER: (Non-isolated Supercapacitor Supply): Risk of electric shock, Supercapacitor

circuit is not isolated from AC input; hazardous voltage may exist between battery terminals

and ground. Test before touching.

6. CAUTION: (Fuses): To reduce the risk of fire, replace only with the same type and rating of

fuse.

7. CAUTION: Intended for installation in a controlled environment. The maximum ambient

temperature is 40°C.

8. DANGER: When replacing energy storage modules or components, replace with the same

type and number.

9. DANGER: Do not dispose of Supercapacitors in a fire, as they may explode.

10. DANGER: Do not open or damage the Supercapacitors, chemicals may be released which is

harmful to the skin and eyes.

11. DANGER: A battery or Supercapacitor unit can present a risk of electric shock and high short

circuit current.

DANGER!

CAUTION!

DANGER!

12. The following precautions should be taken when working with Supercapacitors:

a. Remove watches, rings and other jewelry or metal objects.

b. Use only tools with insulated handles.

c. Wear rubber gloves and boots.

d. Do not lay tools or metal parts on top of unit.

e. Disconnect charging source prior to connecting or disconnecting Supercap terminals.

13. To reduce the risk of electric shock, disconnect the UPS from the AC input power supply before

installing a communication interface cable. Reconnect the power cord only after

communication interconnections have been made.

14. DANGER: To reduce risk of fire, use only No. 26 AWG or larger telecom line cord.

15. DANGER: (For 700-3000VA 230V Models Only): To reduce risk of fire, connect only to a

circuit provided with 20 amperes maximum branch circuit over-current protection in

accordance with the National Electric Code, ANSI/NFPA 70”.

16. DANGER: (For 3000VA 120V Models with I/P Terminal Block Only): To reduce risk of fire,

connect only to a circuit provided with 30 amperes maximum branch circuit over-current

protection in accordance with the National Electric Code, ANSI/NFPA 70”.

17. DANGER: (For 700-2000VA 120V Models with I/P Terminal Block Only): To reduce risk of

fire, connect only to a circuit provided with 20 amperes maximum branch circuit overcurrent

protection in accordance with the National Electric Code, ANSI/NFPA 70”.

The instructions contained within this safety manual are extremely important and should be

closely followed at all times during installation and follow-up maintenance of the UPS and

batteries or Energy Storage Unit.

The unit contains dangerous voltage levels. If the UPS is on, but not connected to an AC power

supply, the unit’s outlets may still be energized with voltage due to the presence of an internal

power source, i.e. the battery or Supercapacitor Energy Storage Unit.

The unit should be installed indoors in an area free of electrically-conductive contaminants. The

unit should be installed in a temperature and humidity controlled environment in order to reduce

the risk of electric shock.

Only the power cord that is supplied with the unit should be used to connect it to the AC power

supply. The equipment should also be located as close as possible to the AC supply.

Servicing and maintenance should only be carried out by qualified service personnel.

Before carrying out fuse replacement or shipping the unit, first ensure that the unit is turned off

completely and all cables are disconnected.

CAUTION!

SAVE THE ORIGINAL SHIPPING BOX

When returning the SuperCap UPS for servicing, use the original shipping box with the supplied

Styrofoam protectors. Manufacturer is not responsible for damage caused by improper packaging

of returned systems.

READ THE OPERATOR’S MANUAL

Before installation, become familiar with the SuperCap UPS by reviewing the procedures and

drawings in this manual. If you have any questions about safe installation, operation, or

maintenance, contact Manufacturer customer service department.

Complete the following for records & future servicing:

Model No.: ___________________________________

Serial No.: ___________________________________

(Above items can be found on the nameplate label attached to the side of the unit)

Products Sales Order No.________________________

P/N: ________________________________________

Purchase Order No.:____________________________

Purchased from: _

(Following details are for installation location)

Installation date: _

Installed by: _

City: _

State/Province: _

Zip/Postal Code: _

Country: _

Telephone #: ___________________________________________

Fax #: ________________________________________

E-Mail: ________________________________________

Section 1: Glossary

ANSI

AWG

BBS

E-BBS

IEEE

EIA

ITE

KVA

LED

LCD

NEMA

PTR

THD

VDC

VAC

Alternating Current

American National Standards Institute

American Wire Gage

Battery Backup System

External Battery Backup System Cabinet

Direct Current

Institute of Electrical and Electronics Engineers

Electronic Industries Association

Institute of Transportation Engineers

Kilovolt-Ampere

Light Emitting Diode

Liquid Chrystal Display

National Electrical Manufacturers Association

Normally Close

Normally Open

Outside Diameter

Power Transfer Relay

Underwriters Laboratories

Terminal Block

Total Harmonic Distortion

Ultraviolent Light

Volts DC

Voltage Ampere

Voltage Alternating Current

Section 2: Description of Your SuperCap UPS System

The UPS module is a true online double-conversion UPS.

This means that the module is designed with a rectifier directly driving an inverter, even when

powered from normal AC current.

It will provide near-instantaneous protection from input power interruptions by means of one or

more attached batteries or an associated ‘energy storage unit’.

A multifunction LCD control panel indicates the status of the system and allows the user to make

parameter adjustments.

Communication options include power-monitoring & system management software and SNMP

capability.

The SuperCap UPS System consists of two parts:

1. UPS Module

2. Energy Storage Module

The Supercapacitor-based Energy Storage Module is an alternative to expensive and hazardous

external batteries. The Energy Storage Module is designed specifically for applications requiring

short-term backup to sensitive loads that either need to ride-through voltage sags and momentary

power outages or simply bridge the startup of a generator.

The Energy Storage Module can be charged independently of the UPS module. Unlike the

charging times required by standard UPS batteries, the Energy Storage Unit can charge to near-

full capacity in less than 5 minutes.

Key Features

1. Green, maintenance-free energy storage.

2. User-friendly, modular component system.

3. Lighter than other technologies.

4. Superior power density over batteries.

5. Virtually unlimited cycle life.

6. Multiple microprocessor and double-conversion design base.

7. High input power factor and DC-start function.

8. Protection against voltage sags and surges plus input frequency fluctuations.

9. Remote monitoring with an RS-232 interface and an optional network interface card.

Operation Modes

1. UPS System Block Diagram:

2. Normal Operation:

There are two main loops when AC utility is normal: the AC loop and the capacitor charging loop.

The AC output power comes from AC utility input and passes through AC/DC rectifier, DC/AC

inverter and static switch to support power to load. The capacitor charging voltage comes from

AC utility input and converted by AC/DC charger to support capacitor-charging.

ENERGY

STORAGE

MODULE

ENERGY

STORAGE

MODULE

Ce manuel convient aux modèles suivants

Table des matières

Manuels UPS populaires d'autres marques

Pylontech

Pylontech Victron & Pylontech US5000 Manuel utilisateur

Tecnoware

Tecnoware EVO DSP PLUS MM 6.8 Manuel utilisateur

Mecer

Mecer ME-1000-WTU Manuel utilisateur

Mustek

Mustek PowerMust 530(B) Plus Manuel d'installation et d'exploitation

Emerson

Emerson Liebert NXL series Manuel utilisateur

MAKELSAN

MAKELSAN BOXER SERIES Manuel utilisateur

Block

Block PC-0524-400-0 Manuel utilisateur

CyberPower

CyberPower CP585LCD Manuel utilisateur

Eaton

Eaton 3S Instructions de montage

CyberPower

CyberPower Office Tower Series UPS 1000 Manuel utilisateur

CyberPower

CyberPower BM100 Manuel utilisateur

Best Power

Best Power 610 Manuel utilisateur

Best Power

Best Power Unity/I UT3K Manuel utilisateur

Mustek

Mustek PowerMust 400 Offline Manuel utilisateur

Xantrex

Xantrex Trace 512 UR-UPS Manuel utilisateur

Forza

Forza SL-1501UL Manuel utilisateur

LEGRAND

LEGRAND keor 310081 Manuel utilisateur

ABB

ABB Conceptpower DPA 500 Manuel utilisateur