ABOUT THE MANTIS SUB ENCLOSURE
The Mantis Sub is a sealed aluminium enclosure to support the operation of the
popular Insta360 Pro or Pro2 camera in the underwater environment at depths to 90
metres / 300 feet.
The distinctive hexagonal geometry of the allows an uninterrupted 360-degree view
with clean zenith and nadir. The camera can be switched on and controlled using
capacitive-touch buttons on the body, or connected via a waterproof ethernet
bulkhead to provide control and livestreaming via the Insta360 app.
CAUTIONS FOR USE
•A water-tight test in a bathtub or similar is highly recommended when using
the system for the first time and after the changing of port and O-ring(s).
Submerge the enclosure fully for several minutes, and watch for any bubbles.
•Before cleaning the enclosure, remove the batteries or the DC coupler, or
disconnect the power plug from the outlet.
•Do not use solvents such as benzine, thinner, alcohol, kitchen detergents, etc,
to clean the enclosure, since it may deteriorate the external case or the
coating may peel off.
•Do not leave the enclosure with the lens facing the sun, as rays of light from
the sun may cause it to malfunction.
•Do not leave any metal items (such as clips or hex keys) near the contact
areas of the power plug or near the batteries.
•Store batteries in a cool and dry place with a relatively stable temperature:
oRecommended temperature: 15ºC to 25ºC (59ºF to 77ºF)
oRecommended humidity: 40%RH to 60%RH
•Do not store batteries for a long time while fully charged. When storing
batteries for a long period of time, we recommend charging them once a year.
•Do not use lubricants from other brands with the nitrile rubber O-ring on this
enclosure, only use the lubricant provided by Mantis.
•Discontinue use immediately should you notice any leakage.
•Store the enclosure in a robust, shock-proof container during transportation;
avoid transporting while turned on.
•When travelling by air, do not close the enclosure latches, as this may lead to
a pressure difference between the atmosphere and inside the enclosure.
•Care must be taken when opening the enclosure, as pressure may build up
inside the enclosure which increases the opening force.
•Do not open the product in a wet or sandy environment. Protect the interior
from moisture and debris in order to prevent malfunction or leakage.
•Do not store the product in an environment of high humidity.
•Do not leave the enclosure in direct sunlight for prolonged periods.
•Keep out of reach of children, failure to do so could result in injury.
•Defective products should be shipped to our factory or distributors for service.
Unauthorised disassembling and/or modifications could result in malfunction
or leakage.
