Mandine MSM1000ST-16 Manuel utilisateur

MSM1000ST-16

CMI, TSA 91431 – 91343

MASSY CEDEX - FRANCE

GBGB

The precision in cooking.

Important safeguards

PLEASE READ THE FOLLOWING INSTRUCTIONS

CAREFULLY BEFORE USING THE APPLIANCE.

Read this booklet thoroughly before using and

save it for future reference.

When using electrical appliances, basic safety

precauons should always be followed including

the following:

• If the power cable is damaged, it must be

replaced by the manufacturer, its Aer-Sales

service or similarly-qualied technician to

prevent any danger.

• Do not immerse the motor unit in water or

rinse it under the tap.

• Before you contact the appliance to the power,

make sure the voltage indicated on the boom

of the appliance corresponds to the local

power voltage.

• Do not operate appliance with a damaged cord

or plug, aer the appliance malfuncon, or if it

is dropped or damaged in any manner. Return

the appliance to the nearest authorized Service

Center for examinaon, repair or electrical or

mechanical adjustment.

GB-1

• Do not leave appliance unaended while it is

operang.

• Close supervision is necessary when any

appliance is used by or near children.

• Always disconnect the appliance from the

supply if it is le unaended and before

assembling, disassembling or cleaning.

• The use of aachments not recommended

or sold by the manufacturer may cause re,

electric shock or injury.

• Remove beater/dough hook/whisk from

machine before washing.

• Do not place on or near a hot gas or electric

burner or in a heated oven.

• Always check that the control is OFF before

plugging cord into wall outlet. To disconnect,

turn the control to OFF, then remove plug from

wall outlet.

• Avoid contacng with moving parts.

• Keep hands, clothing, as well as spatulas

and other utensils away from beaters during

operaon to reduce the risk of injury to

persons, and/or damage to the mixer.

• To protect against risk of electrical shock, do

not put machine in water or other liquid. This

may cause personal injury or damage to the

product.

• Do not use machine for other than intended

use.

• Appliances can be used by persons with

reduced physical, sensory or mental

capabilies or lack of experience and

knowledge if they have been given supervision

or instrucon concerning use of the appliance

in a safe way and if they understand the

hazards involved. Children shall not play with

the appliance.

• This appliance shall not be used by children.

Keep the appliance and its cord out of reach of

children.

• Do not let cord hang over edge of table or

counter or touch hot surfaces, including the

stove.

• Do not use outdoors.

• Save these instrucons always.

GB-2 GB-3

• An alternave format of this instrucon

manual is available upon request to the

Carrefour Customer Service.

• Care shall be taken when handling the sharp

cung blades, emptying the bowl and during

cleaning.

• Switch o the appliance and disconnect

from supply before changing accessories or

approaching parts that move in use.

• WARNING: Risks of injuries if you don’t use this

appliance correctly.

• Regarding the instrucons for cleaning surfaces

in contact with food, thanks to refer to the

secon “Cleaning and Maintenance”.

• Regarding the operang mes and speed

seng, thanks to refer to the secon

“Using your kitchen machine”.

Table of contents

Important safeguards ............................................................ GB-1

Table of contents ................................................................... GB-5

Congratulaons ..................................................................... GB-6

Technical specicaon........................................................... GB-6

Know your kitchen machine.................................................. GB-7

Before rst using ................................................................. GB-13

Using your kitchen machine ................................................ GB-14

1 - Food Mixer ................................................................. GB-14

2 - Blending ..................................................................... GB-16

3 - Meat mincer............................................................... GB-17

4 - Sausage making.......................................................... GB-19

5 - Shredder accessory .................................................... GB-19

6 - Pasta Maker................................................................ GB-21

Cleaning .............................................................................. GB-22

What to do if your appliance does not work....................... GB-24

Cookery ps......................................................................... GB-25

Trademarks.......................................................................... GB-30

Recycling.............................................................................. GB-30

Addional Informaon ........................................................ GB-30

GB-4 GB-5

Technical specicaon

• Rated voltage: 220-240V~

• Rated frequency: 50-60Hz

• Rated power: 1000W

• Protecon class: Class II

Know your kitchen machine

Fig. 1 Overview of kitchen machine

GB-6 GB-7

Congratulaons

Congratulaon on your purchase. For a beer use of your new

device, we recommend you to read carefully this user manual

and keep it for record.

Fig. 2 The main unit tools assembly Fig. 3 The blender jug accessory assembly

1. Beater

2. Whisk

3. Dough hook

4. Front output cover

5. Rear output cover

6. Tool connector

7. Release buon

8. Speed selector

9. Splash guard

10. Mixer bowl

11. Glass jar

12. Measuring cup

13. Jug lid

14. Seal ring

15. Blender blade assembly

Parts:

GB-8 GB-9

Fig. 4 The meat mincer & sausage maker accessory assembly Fig. 5 The pasta maker accessory assembly

1. Pusher

2. Funnel

3. Sausage sck bracket

4. Cuer blade

5. Feed screw

6. Grinding disc A

7. Grinding disc B

8. Nut ring

9. Mincer body

10. Small sausage sck

11. Big Sausage sck

12. Spanner

1. Pusher

2. Funnel

3. Mincer body

4. Feed screw

5. Pasta disc (6pcs)

6. Nut ring

7. Spanner

Parts: Parts:

GB-10 GB-11

Fig. 6 The shredder assembly

1. Pusher

2. Shredder body unit

3. Fine shredding blade cone

4. Coarse Shredding blade cone

5. Slicing blade cone

6. Cung tube cover

Shredder accessory

Before rst using

1. Before use the kitchen machine and accessories for the rst

me, thoroughly clean the parts that come into contact with

food.

2. Before switching on your kitchen machine, make sure the

speed selector is at the “0” posion, and then aach the

whisk, beater or dough hook.

3. Always turn the speed selector to “0” posion, unplug the

cord from power outlet when mixing is completed.

4. The max. operaon me per mes shall not exceed

10 minutes and minimum 20 minutes rest me must be

maintained between two consecuve cycles.

5. Always follow the recommended quanes, processing me

and speed seng. Do not exceed the suggested processing

speed to avoid damage to the machine.

6. It is normal that the tool connector will rotate with the gear

cover, during the use of other accessories such blender, meat

mincer etc.

Important Tips:

1. The appliance will start only if the rear cover and the head

are locked. The appliance will stop immediately if you unlock

the rear cover and the head during operaon. Lock the cover

and head, turn the rotary buon to the “0” posion, then

start the appliance normally by selecng the desired speed.

2. The appliance comes with a microprocessor the control and

analysis the operang power. If the load becomes too high,

the appliance will stop automacally. Restart the appliance,

turn the rotary buon to the “0” posion and remove some

of your ingredients, and allow the appliance cool down for a

few minutes, then restart the appliance.

GB-12 GB-13

Using your kitchen machine

1 - Food Mixer

1.1 - Assembly the accessories

• Rotate the buon (7) clockwise to release the unit head and

raise it unl it lock in place.

• Lock the SUS bowl (10) clockwise on the appliance and put in

the ingredients.

• Insert the desired accessory (1, 2 or 3) on the tool connector

(6), push and rotate it to lock the accessory in its housing.

• Place the unit head to the horizontal posion: rotate the

buon (7) and manually press the head unl it locks to its

inial posion.

• Slide the lid (9) over the bowl (10).

Note: It is not essenal to use the lid but it prevents splashing.

1.2 - Usage

Start by turning the rotary buon (8) to the desired posion

according to the recipe.

• The appliance starts running immediately. You can add food

through the hole in the lid (9) during operang.

• To stop the appliance, turn the buon (8) to “0”.

• The recommended quanes, processing me and speed for

bowl tool as following.

Name Purpose Speed Time

Dough

hook

For making bread

dough

1-2 4-6 min

Beater For making cakes,

cookies, pastry,

mashed potato etc.

1-10 4-6 min

Whisk For making egg

white, cream,

meringues, mousses

and soues

10 3 min

Tips:

• Kneading

͵ Use the dough hook accessory (3) at speed “1-2”.

• Mixing

͵ Use the beater accessory (1) at speed “1” to “10”.

͵ You can mix up to 1.8 kg of light dough (light cake mixture,

sponge cake, biscuit or cookie dough).

Note: Never use the beater (1) to knead heavy dough.

• Beang / Whisking

͵ Use the balloon whisk accessory (2) at speed “1” to “10”.

You can prepare: mayonnaise, sauces, whisk egg white (up to

10 egg white), whipped cream (up to 500ml), meringues etc.

Note: Never use the balloon whisk (2) to knead heavy dough

or mix light dough.

1.3 - Dismantling the accessories

• Wait for the appliance to come to a complete stop.

• Remove the lid (9).

• Rotate the buon (7) to release the head and raise it to lock

place.

• Remove the accessory (1), (2) or (3) from the head by pushing

the accessory up and rotang it a quarter slot.

• Remove the SUS bowl (10).

GB-14 GB-15

2 - Blending

3 - Meat mincer

Before you start, make sure that you assemble according to Fig. 3.

2.1 - Assembly the accessory

• Place the unit head in the horizontal posion and make sure

the appliance is switched o or unplugged.

• Remove the rear output cover (5) by press and move it along

the arrow direcon.

• Place the blender Jar on the rear outlet by rotang it

clockwise.

2.2 - Usage

• Start by turning the rotary buon (8) to the desired posion

according to the recipe.

• Use the “P” posion for beer mixing control or for ice

crushing unl the ice is nely crushed.

• You can add food through the hole in the measuring cup

during preparaon.

• To stop the appliance, turn the buon (8) to “0”.

Note:

• Never ll the blender jug with boiling liquid. Only use liquid

or foods at simmering temperature or below.

• Never run the blender jug empty.

• Never use the blender jug without its lid.

• Never remove the lid before the blades have stopped

completely.

• Always pour liquids or add ice cubes to the jug when use the

blender.

2.3 - Dismantling the accessory

• Wait for the appliance to come to a complete stop before

remove the blender.

• Unlock it in the an-clockwise direcon and put the rear

cover (5) on the posion.

2.4 - Recommend function recipe

• Recipe: add water and carrot (cut size 15mm*15mm*15mm)

in proporon of 3 to 2 (by volume).

• Method: operate unit for 2 minutes at highest seng.

• Result: it is acceptable that carrots shall be blended into

pieces within specic me and juices shall not contain more

than 4mm cubes.

Before you start, make sure that you assemble according to Fig. 4.

3.1 - Assembly the mincer accessory

• Hold the mincer body (9) by the feed tube, with the wider

opening uppermost.

• Insert the feed screw (5) (gear side rst) into the body (9).

• Fit the cuer blade (4) onto the sha side from the feed

screw (5) with the cung edges facing outwards.

• Fit the grinding disk A or B (6 or 7) on the blade (4), aligning

the hole of disk with pin in the body (9).

• Screw the nut ring (8) on the body in the clockwise direcon

and lock it by the spanner (12).

3.2 - Fitting the mincer accessory on the appliance

• Facing the front outlet, insert the assembled mincer head

inclined to the right, aligning the two bayonets in the mincer

head with the two notches in the outlet.

• Push the mincer head into the outlet and turn the mincer

head an-clockwise unl it latches with the feed tube in the

vercal posion.

• Place the removable tray (2) on the feed tube.

GB-16 GB-17

Table des matières

Autres manuels mandine Mixer

mandine

mandine MIC340D-17 Manuel utilisateur

mandine

mandine MHM400-16 Manuel utilisateur

mandine

mandine MHB600-16 Manuel utilisateur

mandine

mandine MSB300-17 Instructions d'installation

Manuels Mixer populaires d'autres marques

Bosch

Bosch GRW 9 Manuel utilisateur

MULTIQUIP

MULTIQUIP Whiteman WM45E Mode d’emploi

KitchenAid

KitchenAid KSM7581BZ0 Guide rapide

Jay-Lor

Jay-Lor 5050 Manuel utilisateur

Sunbeam

Sunbeam FPSBSM210X Manuel utilisateur

MULTIQUIP

MULTIQUIP Whiteman MC94S Mode d’emploi

Thinky

Thinky ARE-250 Manuel utilisateur

Midas

Midas XL4 Manuel utilisateur

bianco

bianco PURO 4 Manuel utilisateur

Paso

Paso DAG9200 Manuel utilisateur

Sima

Sima SFX-9A Manuel utilisateur

better chef

better chef IM-815WC Instructions d'installation

ALLEN & HEATH

ALLEN & HEATH GR1 Manuel utilisateur

Lacor

Lacor 69083 Fiche technique

M-Audio

M-Audio Midiman SAM Manuel utilisateur

Buffalo

Buffalo CP921 Manuel utilisateur

Pentair

Pentair HYPRO Cleanload 3376-0870 Instructions de fonctionnement

Cuisinart

Cuisinart SM50WHE Manuel utilisateur

mandine MSM1000ST-16 Manuel utilisateur

Manuels Mixer populaires d'autres marques