1514
• Replacing wheels to All Terrain
1.Replacingthewheelwithoutadrive
a) usingtheT-Toolprovidedwiththeset,unscrewthenutxingthePU
wheel.
b) remove the spacer from the PU wheel.
c) pullothePUwheel.
d) check if the second distance washer is on the hanger's axis, if so leave it
inplace,ifnot,youcanprobablynditonthePUwheelbearing-putit
on the axle.
e) put the AT wheel on the axle so that the bearing located inside the rim
would be located on the outside.
f) put the spacer on the hanger's axis.
g) screw the nut so that the wheel does not slack and rotates freely
on the axis.
2.Replacingthedrivewheel
a) use the included small Torx key to unscrew drive belt cover.
b) using small Torx key loosen 4 screws securing the motor (loosen, do not
unscrew).Movethemotordownalongthegroovesinthemount.
c) usingtheT-Toolprovidedwiththeset,unscrewthenutxingthePU
wheel.
d) remove the spacer from the PU wheel.
e) pullothePUwheelalongwiththegearrack,largebearingandtoothed
belt.
f) puttwo25mmpadsonthehanger.
g) put the large drive belt on the hanger, so it hangs on it freely.
h) put the AT wheel with a toothed wheel and a large bearing on top of it
on the hanger's axis.
i) hitthewheellightlywithyourhandunlitclicksintoplace.Ifitdoesnot
fullyt,itwillaerghteningthenutontheaxle.
j) put the spacer on the hanger's axis.
k) screw the nut so that the wheel does not slack and rotates freely on the
axis.Ifthewheelisn'tintheproperposionyet,ghtenthenutunl
everythingts.Aerngunscrewthenutslightlysothatthewheel
can rotate freely.
l) put the drive belt on the large gear next to the AT wheel and on the
small gear wheel of the engine.
SPECIFICATION
Tools needed: T-Tool, Torx key 4
The AT set contains:
• 4 AT wheels (set consisting of rims, tires, inner tubes of small bearings)
Instruconalvideosavailableatproducent'swebsite.
• large sprocket
• large bearing
• toothed belt
• distance pads
