MAIWO K8AA Manuel utilisateur
User Manual
K8AA 8 Bay RAID Enclosure
Catalog
（Please carefully read instruction before installation）
Chapter 1 Product Descriptions...................................................................... 5
Chapter 2 Product Features............................................................................ 5
Chapter 3 Product Specifications................................................................... 6
Chapter 4 System Requirements and Parts List.............................................8
Chapter 5 Product Interface Introduction................................................... 8-9
Chapter 6 Interface Name................................................................................9
Chapter 7 Installation Guide......................................................................... 10
Chapter 8 Operation Instruction................................................................... 11
Chapter 9 RAID Function and Description............................................... 12-13
Chapter 10 Self Inspection....................................................................... 14-21
Chapter 11 Warranty Certificate................................................................... 22
Chapter 12 Notice.......................................................................................... 23
The appearance, structure and specifications of the product may change slightly.
②
Notice
(Be sure to read carefully)
Note: Please follow this product manual to start using this product.
1. Please do not move the enclosure when this K8AA RAID enclosure is in fully
assembled with hard disks with computer to avoid damaging the hard disks or
causing the risk of electric shock.
2. This product supports SATA (I/II/III) HDD and SSD.
3. Avoid the impact of external forces when use this product.
4. Pay attention to the direction and position of the hard disks when insert them
to enclosure, wrong direction and position will damage the enclosure.
5. Pay attention to static electricity when using, your fingers can not touch the
hard disk circuit board, do not insert a damaged hard disk into this enclosure,
please make sure that the hard disk is good, otherwise it may damage product
and lost data.
6. In the event of damage to the hard disks used with this device, our company
shall not be liable for compensation, and shall not be liable to the data recorded
on the hard disks.
7. Do not use this product in dusty, direct sunlight, pollution or humidity, etc. All
these may affect the use of the product.
8. The cables (Type-C Cable, Power Cord) and other accessories of this product
are consumables, please check the package according to Chapter 5 to confirm
whether accessories are complete.
9. If missing accessories, please contact the seller in time to avoid delay in use.
③
Note: Please follow this product manual to start using this product.
1. RAID Configuration Method.
a. The initial RAID mode of this enclosure is NORMAL (Clear RAID) mode, if you
want to use another RAID mode, please follow the instruction to change mode.
b. Please use the hard disks from regular brand manufacturer, and the capacity,
model and manufacturer must be consistent. To prevent data loss, it is not
recommended to use small brands of hard drives to set RAID.
c. When configuring RAID mode, the data inside hard drives will be deleted.
Therefore, data should be backed up before using.
④
Notice
(Be sure to read carefully)
Chapter 1
Chapter 2
⑤
1. Connect the machine to PC via Type-C data cable, and support up to 8 hard
disks.
2. Support 3.5 inch (26MM) and 2.5 inch (5/7/9.5/12.5/15MM) SATA I/II/III HDD
and SSD.
3. When using RAID 5+0, if one of the hard disks got problem, the data can be
automatically restored after updating the defective hard disk.
4. Support Type-C super speed .
5. Support operating system: Windows XP/Vista/2K, Windows 7/8/9/10, Mac OS
10.X above and Linux.
6. Depending on version of operating system, the identification of capacity of
hard disks will be different. Windows XP/Windows 2000 32bit or previous mode
supports maximum 2TB. Windows XP 64bit/VISTA/WIN 7/8/10 32bit, 64bit
supports maximum 128TB.
MAIWO K8AA is an enclosure that supports multiple RAID modes which can
meet the storage requirements of large-capacity hard disks.
MAIWO K8AA is an external storage device that supports high-speed data read-
ing and copying with Type-C interface.
Product Description：
Product Features:
Chapter 3
⑥
Product Specification:
Product Name MAIWO K8AA
Support Hard
Drive
HDD Capacity 16TB X8 / Max 128TB
(RAID 0, Combine)
Product Size
Interface and Speed Type-C（Gen1 5Gbps）
347*344*150mm
Support OS Windows XP/VISTA/Win 7/8/9/10
Mac OS 10.X and above
3.5" (26MM)
2.5" (5/7/9.5/12.5/15MM)
SATA I/II/III Hard Drive X8PCS
Intelligent
Temperature
Control Fan
0°C-47°C Fan Stationary
48°C-57°C Primary Air Volume
Above 58°C Secondary Air Volume
Fan Speed Ball Fan 5000RPM
Transfer Interface Type-C/eSATA
RAID Mode
Display Description Clock Display+Touch Display Panel
LED Indicator Disk indicator is white, flashing when reading
data, indicator will not light up if can not read
drives.
Software DIP Switch or Software Setting RAID
Chapter 4
⑦
Chapter 5
Assembly Parts List:
Accessory Quantity
MAIWO K8AA
User Manual
Certificate of Qualification/Warranty Card
1 PC
1 PC
Type-C to Type-C cable
Type-C to USB3.0 cable 1 PC
1 PC
1 Set
Power Cord 1 PC
Screw Drive 1 PC
Screws A Packet
Support Intel Pentium-II 800MHz (minimum specification), 64MB RAM or more.
Windows 2000, XP/Vista, Windows 7/8/10 or Mac OS 10X, 250MB or more hard
disk capacity.
Type-C Connection:
Computer with USB-C or USB-A interface.
System Requirements:
⑧
①
②
③
⑤
④
⑥
⑦
⑧
⑨
⑩
⑪
Chapter 6
The interface name of the device:
38.5
23:50C
1
2
3
4
A
5
6
7
8
B
1 2 3
The interface name of the device:
⑨
① Indicator for hard disk working status
② Touch button for controlling display light on/off
③ Temperature display
④ Time display
⑤ Power switch
⑥ RIAD setting switch: BIG LARGE/RAID 0 X2/RAID 0/PM/LARGE X2/RAID 5
X2/RAID 5+0, etc.
⑦ Reset button: Use this button to reset when change to another RAID mode
⑧ ESC button (Alarm silence button)
⑨ eSATA interface
⑩ Type-C interface
⑪ Power cable interface
Chapter 6
⑩
Chapter 7
Installation Guide:
1. Open the front cover of the device, remove the hard disk bracket, and install
the hard disk on the bracket, as shown below:
Screw position for 2.5 inch hard drives Screw position for 3.5 inch hard drives
2. Fix 2.5 inch hard disks with screws at the bottom of the bracket as shown on
the left picture.
3. Fix 3.5 inch hard disks with screws on both sides of the bracket as shown on
the right picture.
38.5
23:50C
1
2
3
4
A
5
6
7
8
B38.5
23:50C
1
2
3
4
A
5
6
7
8
B
Table des matières
