DataLogger Series 4 Technical Manual
February 2021
Page 3 of 28
Product Safety Information
Magnetek, Inc. (Magnetek) offers a broad range of radio remote control products, control products and
adjustable frequency drives, industrial braking systems, and power delivery products for material handling
applications. This manual has been prepared by Magnetek to provide information and recommendations
for the installation, use, operation and service of Magnetek’s material handling products and systems
(Magnetek Products). Anyone who uses, operates, maintains, services, installs, or owns Magnetek
Products should know, understand, and follow the instructions and safety recommendations in this
manual for Magnetek Products.
The recommendations in this manual do not take precedence over any of the following requirements
relating to cranes, hoists, lifting devices or other equipment which use or include Magnetek Products:
▪Instructions, manuals, and safety warnings of the manufacturers of the equipment where the
Magnetek Products are used,
▪Plant safety rules and procedures of the employers and the owners of the facilities where the
Magnetek Products are being used,
▪Regulations issued by the Occupational Health and Safety Administration (OSHA),
▪Applicable local, state, provincial, or federal codes, ordinances, standards, and requirements, or
▪Safety standards and practices for the industries in which Magnetek Products are used.
This manual does not include or address the specific instructions and safety warnings of these
manufacturers or any of the other requirements listed above. It is the responsibility of the owners, users,
and operators of the Magnetek Products to know, understand and follow these requirements. It is the
responsibility of the employer to make its employees aware of the above listed requirements and to make
certain that all operators are properly trained.
No one should use Magnetek Products prior to becoming familiar with and being trained in these
requirements and the instructions and safety recommendations for this manual.
Product Warranty Information
Magnetek, hereafter referred to as Company, assumes no responsibility for improper programming of a
device (such as a drive or radio) by untrained personnel. A device should only be programmed by a
trained technician who has read and understands the contents of the relevant manual(s). Improper
programming of a device can lead to unexpected, undesirable, or unsafe operation or performance of the
device. This may result in damage to equipment or personal injury. Company shall not be liable for
economic loss, property damage, or other consequential damages or physical injury sustained by the
purchaser or by any third party because of such programming. Company neither assumes nor authorizes
any other person to assume for Company any other liability in connection with the sale or use of this
product.
For information on Magnetek’s product warranties by product type, please visit:
https://www.columbusmckinnon.com/magnetek
DANGER, WARNING, CAUTION, and NOTE Statements
Read and understand this manual before installing, operating, or servicing this product. Install the product
according to this manual and local codes.
The following conventions indicate safety messages in this manual. Failure to heed these messages
could cause fatal injury or damage products and related equipment and systems.
