MAGINON DLP 1400S Manuel utilisateur

English

EN-1

FCC Notice

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in residential installation. This

equipment generates, uses and can radiate radio frequency energy and if not installed

and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or

television reception, detectable by turning the equipment in question off and on, the

user is encouraged to try to correct the interference by one or more of the following

measures:

Reorient or relocate the receiving antenna

Increase the distance between the equipment and the receiver

Connect the equipment to an outlet on a different circuit than that which the receiver

is connected to

Or consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to following

two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference that may cause undesired operation.

EN-2

Safety Instructions

Read all of these instructions before you operate your projector and save for future

reference.

1. Check that the operating voltage of your unit is identical with the voltage of your

local power supply.

2. Should any liquid or solid object fall into the cabinet, unplug the unit and have it

checked by the qualified personnel before operating it further.

3. Do not attempt to service this product yourself, as opening or removing covers

may damage the components inside and will void your warranty.

4. Do not place this product on an unstable cart, stand, or table. The product may fall,

causing serious damage to the product.

5. Unplug the unit from the wall socket if it is not to be used for several days. To

disconnect the cord, pull it out by the plug. Never pull the cord itself.

6. The wall socket should be near the unit and easily accessible.

7. Do not place the projector where the cord can be stepped on as this may result in

fraying or damage to the lead or the plug. Be alert to tripping hazards.

8. Never look into the projector lens when the lamp is switched on as the bright light

can damage your eyes. Never let children look into the lens when it is on.

9. Do not place your hand or objects near the ventilation holes. The air coming out is hot.

10. Never open any covers on the projector except the lamp cover. Dangerous electrical

voltages inside the projector can cause severe injury. Except as specifically directed

in this User's Manual, do not attempt to service this product yourself. Refer all

servicing to qualified service personnel.

11. Unplug the projector from the wall socket before cleaning. Use a damp cloth for

cleaning the projector housing. Do not use liquid or aerosol cleaners.

12. Keep the plastic packing materials (from the projector, accessories and optional

parts) out of the reach of children as these bags may result in death by suffocation.

Be particularly careful around the small children.

English

EN-3

13. For ventilation reasons, the fan continues to operate after the projector has been

powered off. Please do not unplug the power cord until the fan stops.

14. The projector is equipped with ventilation holes (intake) and ventilation holes

(exhaust). Do not block or place anything near these slots, or internal heat build-up

may occur, causing picture degradation or damage to the projector.

15. When you replace the projector lamp, never touch the new bulb with your bare

hands. The invisible residue left by the oil on your hands may shorten the bulb life.

Use lint-free gloves or finger cots are recommended.

16. The product should be situated away from heat sources such as radiators, heat

registers, stoves, or other products (including amplifiers) that produce heat.

17. Do not overload wall outlets, extension cords, or integral convenience receptacles

as this can result in a risk of fire or electric shock.

EN-4

Notes on AC Power Cord

AC Power Cord must meet requirement of country where you use a projector. Confirm

an AC plug type with graphics below and proper AC Power Cord must be used. If

supplied AC Power Cord does not match your AC outlet, contact your sales dealer.

This projector is equipped with a grounding type AC line plug. Make sure that your

outlet fits the plug. Do not defeat the safety purpose of this grounding type plug. We

highly recommend using a video source device also equipped with a grounding type

AC line plug to prevent from signal interference due to voltage fluctuation.

Ground Ground

Ground

For the U.K.

For the U.S.A. and CanadaFor Australia and

Mainland China

For Continental Europe

English

EN-5

CONTENTS

Product Introduction ................................................................................................. 6

Projector Features ............................................................................................. 6

Package Contents ............................................................................................. 7

Getting to Know the Projector .................................................................................. 8

Projector Components ...................................................................................... 8

Remote Control Components .......................................................................... 11

Installation .............................................................................................................. 12

Connecting the Projector ................................................................................. 12

Powering On/Off the Projector ........................................................................ 16

Adjusting the Projected Image ........................................................................ 17

Adjusting the Projector Zoom and Focus ........................................................ 18

Adjusting Projection Image Size ...................................................................... 18

Using the Projector ................................................................................................. 20

Control Panel ................................................................................................... 20

Remote Control ............................................................................................... 21

Menu Options .......................................................................................................... 24

Color (Computer/Video Mode) ......................................................................... 25

Image (Computer Mode) .................................................................................. 27

Image (Video Mode) ......................................................................................... 28

Management ( Computer/Video Mode) ............................................................ 29

Audio (Computer/Video Mode) ........................................................................ 30

Language ........................................................................................................ 31

Maintenance ........................................................................................................... 32

Cleaning the Lens ............................................................................................ 32

Cleaning the Projector Housing ........................................................................ 32

Replacing the Lamp .......................................................................................... 33

Technical Specifications ......................................................................................... 35

Appendix ................................................................................................................ 36

Indicator Messages ......................................................................................... 36

Preset Signals ................................................................................................. 37

Troubleshooting..................................................................................................39

EN-6

Product Introduction

Projector Features

The projector integrates high-performance optical engine projection and a user-friendly

design to deliver high reliability and ease of use.

The projector offers the following features:

Single chip 0.55" Texas Instruments DLP™ technology

SVGA (800 x 600 pixels)

Compact size, light weight for portability

1.2x manual zoom lens

Auto image re-sizing (Auto-Sync.) to 800 x 600 full screen with scaling compression

compatibility for VGA, SVGA, XGA*and SXGA*.

State-of-the-art motion adaptive hardware deinterlacing with 3:2 pull down

Compatibility with Macintosh®computers

Compatibility with NTSC, PAL, SECAM, and HDTV

Multi-function remote control

D-Sub 15-pin cable for analog video connectivity

User-friendly, multi-language on-screen display (OSD)

Advanced electronic keystone correction

* means compressed.

English

EN-7

Package Contents

When you unpack the projector, make sure you have all these components:

Save the original shipping carton and packing material; they will come

in handy if you ever to ship your unit. For maximum protection, repack

your unit as it was originally packed at the factory.

Accessories and components may vary by retailer and region.

Projector with Lens Cap AC Power Cord VGA Cable (D-SUB to D-SUB)

S-Video Cable Composite Video Cable

Battery for

Remote Control

Audio Cable

VGA (D-SUB) to

HDTV (RCA) Cable

Projector

Carrying Case User’s Manual

Remote Control (IR)

Optional Accessory:

EN-8

Getting to Know the Projector

Projector Components

Front View

1. Lens cap

2. Lens cap strap

3. Front IR remote control sensor

4. Lens

5. Ventilation holes (intake)

6. Zoom ring

1 2 4

10 5

11 3

7. Focus ring

8. Control panel

9. Speaker

10. Ventilation holes (exhaust)

11. Elevator foot

12. Elevator button

English

EN-9

Rear View

1. Interface connector

2. Rear IR remote control sensor

3. Security lock receptacle

4. AC power socket

5. Ventilation holes (intake)

6. Tilt-adjustment foot

Bottom View

1. Lamp cover

4 56 6

EN-10

Control Panel

1. (power)

2. Power LED indicator

3. Keystone S/T

4. Auto X

5. Menu

6. Four direction buttons

7. Lamp LED indicator

8. Source W

Interface Connector

1 2

1. USB connector

This connector is used for engineering purpose.

2. AUDIO input connector

Connect an audio output from video equipment to this jack.

3. COMPUTER IN (D-SUB) connector

Connect image input signal (analog) to this connector.

4. S-VIDEO connector

Connect S-Video output from video equipment to this jack.

5. VIDEO connector

Connect composite video output from video equipment to this jack.

1 2 3 4

Table des matières

Autres manuels MAGINON Projecteur

MAGINON

MAGINON 1100S Manuel utilisateur

Manuels Projecteur populaires d'autres marques

iEmmet

iEmmet MP-312 Manuel utilisateur

Epson

Epson VS400 Manuel utilisateur

Sony

Sony VPL-HS10 Marketing Specifications & Features Manuel utilisateur

Sony

Sony VPL-HW65ES Manuel de service

Toshiba

Toshiba TLP-791U Manuel utilisateur

Philips

Philips LC1341 Guide de référence

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manuel utilisateur

NEC

NEC NP600S EDU Manuel utilisateur

BenQ

BenQ SH753P Manuel utilisateur

Eiki

Eiki EK-623U series Manuel utilisateur

Epson

Epson PowerLite Pro Cinema 6020UB Manuel utilisateur

Epson

Epson PowerLite Home Cinema 705HD Manuel utilisateur

Christie

Christie LHD700 Manuel utilisateur

Navitar

Navitar FX Manuel utilisateur

InFocus

InFocus LitePro 560 Manuel utilisateur

Sony

Sony SRX-R815P Manuel utilisateur

Vivitar

Vivitar DP1500 X Manuel utilisateur

Acer

Acer C20 Series Manuel utilisateur