Magellan ProMark3 Manuel utilisateur

Magellan Reinstalling the ProMark3 Receiver Base Map – NCSA ONLY Page 1 of 2

Instructions for reinstalling the ProMark3 base map – in North,

Central and South America ONLY

22 September 2006

Although the ProMark3 base map covers the United States only, it is required for

operating the ProMark3 receivers, even if you are outside of the United States. If you

ever see a message on your ProMark3 receiver saying that it has lost its base map, press

the ESC, ENTER and power buttons simultaneously to turn off the receiver. Then

reinstall the base map by following these instructions.

1. Place an SD card with at least 3 MB of free memory in a card reader attached to your

PC. If you do not have access to a card reader, you cannot update ProMark3 firmware

by downloading files over the Internet. Instead you will need to purchase a card

reader (they are very useful) or obtain an SD card containing the update from your

ProMark3 dealer.

2. If you have never used the SD card in the ProMark3 receiver, run Windows Explorer

on our PC, navigate to the drive used by the card reader, right-click on it and select

the Format option. Select FAT32 as the file system for cards 64 MB or larger.

Formatting the card will delete all its contents but ensure that the card will be

compatible with the ProMark3 receiver.

3. Use an Internet browser to go to the \Land Survey\PM3\Firmware\N & S America\

folder at ftp.magellangps.com.

4. Copy US_basemap.zip the ftp site to any location on your PC.

5. On your PC double-click on US_basemap.zip, launching WinZip. Extract the

contents of the zip file to the SD card in the card reader. The root directory of the SD

card should now contain a file named PM3USBaseMap.txt. In addition, there should

be a folder labeled ProMark3USbasemap containing a file named basemap.mgi.

6. You must either attach the receiver to external power or make sure that there is at

least 25% charge in the battery. To check the charge, go to the desktop, double-tap

Settings and then the Power icon. The receiver must be turned on for approximately

60 seconds before it activates the power management utility.

7. If the ProMark3 is on, turn it off by pressing the ESC, ENTER and power buttons

simultaneously. With the ProMark3 receiver off, insert the SD card and turn the

receiver on.

8. On the Utilities screen, double-tap the AutoLoader icon.

Magellan Reinstalling the ProMark3 Receiver Base Map – NCSA ONLY Page 2 of 2

9. Highlight PM3USBaseMap.txt and tap the OK button. The base map will install

automatically. Upon completion, tap the OK button on the message screen saying:

“Loading Success….”

10. Perform a cold reset of the GPS receiver by going to the Utilities screen and running

GPSReset.

11. Power-cycle the receiver and re-initialize the receiver to your location, by running

GPSInit. It will take approximately 30 seconds to obtain a fix, another 13 minutes to

record a complete GPS almanac and approximately 30 minutes to record a complete

WAAS/EGNOS almanac. You will be able to track GPS/WAAS satellites and record

data during this period.

12. Turn off the ProMark3 receiver by simultaneously depressing the ESC, ENTER and

power buttons.

Autres manuels pour ProMark3

2

Table des matières

Autres manuels Magellan GPS

Magellan

Magellan RoadMate 760 - Automotive GPS Receiver Manuel utilisateur

Magellan

Magellan RoadMate 5175T-LM Manuel utilisateur

Magellan

Magellan GPS Receiver Manuel utilisateur

Magellan

Magellan RoadMate 3000T - Automotive GPS Receiver Manuel utilisateur

Magellan

Magellan eXplorist TRX7 Manuel utilisateur

Magellan

Magellan RoadMate 1200 - Automotive GPS Receiver Manuel de service

Magellan

Magellan RoadMate 1440 - Automotive GPS Receiver Mode d’emploi

Magellan

Magellan eXplorist TRX7 Manuel utilisateur

Magellan

Magellan eXplorist 200 - Hiking GPS Receiver Manuel utilisateur

Magellan

Magellan RoadMate 3000T - Automotive GPS Receiver Manuel utilisateur

Magellan

Magellan RoadMate 9250T-LMB Manuel utilisateur

Magellan

Magellan Magellan RoadMate 500 Manuel utilisateur

Magellan

Magellan Maestro 4200 - Automotive GPS Receiver Manuel utilisateur

Magellan

Magellan Meridian Platinum Manuel utilisateur

Magellan

Magellan Maestro 4245 Manuel utilisateur

Magellan

Magellan 300GPS Manuel utilisateur

Magellan

Magellan RoadMate 1420 Manuel utilisateur

Magellan

Magellan TR7 CAM Manuel utilisateur

Magellan

Magellan ProMark3 Manuel utilisateur

Magellan

Magellan GPS PROMARK X Manuel utilisateur

Magellan

Magellan RoadMate 3000T - Automotive GPS Receiver Manuel utilisateur

Magellan

Magellan RoadMate 760 - Automotive GPS Receiver Manuel utilisateur

Magellan

Magellan ProMark3 Manuel utilisateur

Magellan

Magellan Z-Max Manuel utilisateur

Manuels GPS populaires d'autres marques

Raven

Raven Cruizer II Manuel

Hama

Hama 53118 Manuel utilisateur

Garmin

Garmin SOUNDER 125 Manuel utilisateur

Garmin

Garmin DEZL 580 Manuel utilisateur

Jigabot

Jigabot EX Manuel utilisateur

Pointer

Pointer Cellocator CelloTrack XT LTE Guide d'installation

Queclink

Queclink GV55LITE Manuel utilisateur

Voxson

Voxson Voxtrack GPS500 Manuel d'instructions

Garmin

Garmin ECHOMAP PLUS Manuel utilisateur

Starcom Systems

Starcom Systems Kylos Compact Manuel utilisateur

Garmin

Garmin 15 H Series Manuel utilisateur

Cobra

Cobra Marine MC 600Ci Manuel utilisateur

Cellocator

Cellocator CelloTrack T Manuel utilisateur

Enfora

Enfora Mini-MT GSM2228UG001 Manuel utilisateur

LTE

LTE G50B Manuel utilisateur

Garmin

Garmin DEZL OTR500 Manuel utilisateur

SkyGolf

SkyGolf SkyCaddie SG1 Manuel utilisateur

Garmin

Garmin GPSMAP 78 series Manuel utilisateur